[PATCH V2 3/4] arm: ti: logicpd-torpedo: Migrate to OF_UPSTREAM
Adam Ford
aford173 at gmail.com
Wed May 1 11:57:52 CEST 2024
The DM37 and OMAP35 Torpedo share a few files, but both of them
can be migrated to OF_UPSTREAM with a small update to their
respective u-boot.dtsi files to address changes made the aliases.
Both defconfigs need to properly point to the upstream directory
structure for the device trees. With those updated, the U-Boot
device tree files can be deleted.
Signed-off-by: Adam Ford <aford173 at gmail.com>
---
V2: Remove DT from Makefile
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f9b582a87e..b163ae18fc 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1143,9 +1143,7 @@ dtb-$(CONFIG_TARGET_USB_A9263) += usb_a9263.dtb
dtb-$(CONFIG_TARGET_OMAP3_LOGIC) += \
logicpd-som-lv-35xx-devkit.dtb \
- logicpd-som-lv-37xx-devkit.dtb \
- logicpd-torpedo-35xx-devkit.dtb \
- logicpd-torpedo-37xx-devkit.dtb
+ logicpd-som-lv-37xx-devkit.dtb
dtb-$(CONFIG_TARGET_OMAP3_EVM) += \
omap3-evm-37xx.dtb \
diff --git a/arch/arm/dts/logicpd-torpedo-35xx-devkit-u-boot.dtsi b/arch/arm/dts/logicpd-torpedo-35xx-devkit-u-boot.dtsi
index 4744872f7c..d14d68e458 100644
--- a/arch/arm/dts/logicpd-torpedo-35xx-devkit-u-boot.dtsi
+++ b/arch/arm/dts/logicpd-torpedo-35xx-devkit-u-boot.dtsi
@@ -14,6 +14,8 @@
aliases {
/delete-property/ serial1;
/delete-property/ serial2;
+ /delete-property/ mmc1;
+ /delete-property/ mmc2;
};
ethernet at 08000000 {
diff --git a/arch/arm/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/dts/logicpd-torpedo-35xx-devkit.dts
deleted file mode 100644
index cb08aa62d9..0000000000
--- a/arch/arm/dts/logicpd-torpedo-35xx-devkit.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include "logicpd-torpedo-som.dtsi"
-#include "logicpd-torpedo-baseboard.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-
-/ {
- model = "LogicPD Zoom OMAP35xx Torpedo Development Kit";
- compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core {
- isp1763_pins: pinmux_isp1763_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat6.gpio_128 */
- >;
- };
-};
diff --git a/arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi b/arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi
index 2c34344504..8e8e2e4096 100644
--- a/arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi
+++ b/arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi
@@ -10,6 +10,8 @@
aliases {
/delete-property/ serial1;
/delete-property/ serial2;
+ /delete-property/ mmc1;
+ /delete-property/ mmc2;
};
ethernet at 08000000 {
diff --git a/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts
deleted file mode 100644
index 07ea822fe4..0000000000
--- a/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "logicpd-torpedo-som.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-#include "logicpd-torpedo-baseboard.dtsi"
-
-/ {
- model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit";
- compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
-
- wl12xx_vmmc: wl12xx_vmmc {
- compatible = "regulator-fixed";
- regulator-name = "vwl1271";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&gpio5 29 0>; /* gpio157 */
- startup-delay-us = <70000>;
- enable-active-high;
- vin-supply = <&vmmc2>;
- };
-};
-
-/*
- * Only found on the wireless SOM. For the SOM without wireless, the pins for
- * MMC3 can be routed with jumpers to the second MMC slot on the devkit and
- * gpio157 is not connected. So this should be OK to keep common for now,
- * probably device tree overlays is the way to go with the various SOM and
- * jumpering combinations for the long run.
- */
-&mmc3 {
- interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
- pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
- pinctrl-names = "default";
- vmmc-supply = <&wl12xx_vmmc>;
- non-removable;
- bus-width = <4>;
- cap-power-off-card;
- #address-cells = <1>;
- #size-cells = <0>;
- wlcore: wlcore at 2 {
- compatible = "ti,wl1283";
- reg = <2>;
- interrupt-parent = <&gpio5>;
- interrupts = <24 IRQ_TYPE_EDGE_RISING>; /* gpio 152 */
- ref-clock-frequency = <26000000>;
- tcxo-clock-frequency = <26000000>;
- };
-};
-
-&uart2 {
- /delete-property/dma-names;
- bluetooth {
- compatible = "ti,wl1283-st";
- enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */
- max-speed = <3000000>;
- };
-};
-
-/* The DM3730 has a faster L3 than OMAP35, so increase pixel clock */
-&mt9p031_out {
- pixel-clock-frequency = <90000000>;
-};
-
-&omap3_pmx_core {
- mmc3_pins: pinmux_mm3_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */
- OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */
- OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */
- OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */
- OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */
- OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */
- >;
- };
-};
-
-&omap3_pmx_core2 {
- mmc3_core2_pins: pinmux_mmc3_core2_pins {
- pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
- OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
- >;
- };
-};
-
-/* The gpio muxing between omap3530 and dm3730 is different for GPIO_128 */
-&omap3_pmx_wkup {
- isp1763_pins: pinmux_isp1763_pins {
- pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a58, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_128 */
- >;
- };
-};
diff --git a/arch/arm/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/dts/logicpd-torpedo-baseboard.dtsi
deleted file mode 100644
index b4664ab002..0000000000
--- a/arch/arm/dts/logicpd-torpedo-baseboard.dtsi
+++ /dev/null
@@ -1,420 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-/ {
- gpio_keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
-
- sysboot2 {
- label = "sysboot2";
- gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */
- linux,code = <BTN_0>;
- wakeup-source;
- };
-
- sysboot5 {
- label = "sysboot5";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */
- linux,code = <BTN_1>;
- wakeup-source;
- };
-
- gpio1 {
- label = "gpio1";
- gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */
- linux,code = <BTN_2>;
- wakeup-source;
- };
-
- gpio2 {
- label = "gpio2";
- gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */
- linux,code = <BTN_3>;
- wakeup-source;
- };
- };
-
- sound {
- compatible = "ti,omap-twl4030";
- ti,model = "omap3logic";
- ti,mcbsp = <&mcbsp2>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins>;
-
- led1 {
- label = "led1";
- gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */
- linux,default-trigger = "cpu0";
- };
-
- led2 {
- label = "led2";
- gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */
- linux,default-trigger = "none";
- };
- };
-
- pwm10: dmtimer-pwm {
- compatible = "ti,omap-dmtimer-pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm_pins>;
- ti,timers = <&timer10>;
- #pwm-cells = <3>;
- ti,clock-source = <0x01>;
- };
-
-};
-
-&vaux1 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
-};
-
-&vaux4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-};
-
-&mcbsp2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcbsp2_pins>;
- status = "okay";
-};
-
-&charger {
- ti,bb-uvolt = <3200000>;
- ti,bb-uamp = <150>;
-};
-
-&gpmc {
- ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
- 1 0 0x2c000000 0x1000000 /* CS1: 16MB for LAN9221 */
- 6 0 0x28000000 0x1000000>; /* CS6: 16MB for ISP1763 */
-
- ethernet at gpmc {
- pinctrl-names = "default";
- pinctrl-0 = <&lan9221_pins>;
- interrupt-parent = <&gpio5>;
- interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */
- reg = <1 0 0xff>;
- };
-
- usb at 6,0 {
- pinctrl-names = "default";
- pinctrl-0 = <&isp1763_pins>;
- compatible = "nxp,usb-isp1763";
- reg = <0x6 0x0 0xff>;
- interrupt-parent = <&gpio5>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "host";
- bus-width = <16>;
- dr_mode = "host";
- gpmc,mux-add-data = <0>;
- gpmc,device-width = <2>;
- gpmc,wait-pin = <0>;
- gpmc,burst-length = <4>;
- gpmc,cycle2cycle-samecsen = <1>;
- gpmc,cycle2cycle-diffcsen = <1>;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <45>;
- gpmc,cs-wr-off-ns = <45>;
- gpmc,adv-on-ns = <0>;
- gpmc,adv-rd-off-ns = <0>;
- gpmc,adv-wr-off-ns = <0>;
- gpmc,oe-on-ns = <0>;
- gpmc,oe-off-ns = <45>;
- gpmc,we-on-ns = <0>;
- gpmc,we-off-ns = <25>;
- gpmc,rd-cycle-ns = <60>;
- gpmc,wr-cycle-ns = <45>;
- gpmc,access-ns = <35>;
- gpmc,page-burst-access-ns = <0>;
- gpmc,bus-turnaround-ns = <0>;
- gpmc,cycle2cycle-delay-ns = <60>;
- gpmc,wait-monitoring-ns = <0>;
- gpmc,clk-activation-ns = <0>;
- gpmc,wr-data-mux-bus-ns = <5>;
- gpmc,wr-access-ns = <20>;
- };
-};
-
-&hdqw1w {
- pinctrl-names = "default";
- pinctrl-0 = <&hdq_pins>;
-};
-
-
-&vpll2 {
- regulator-always-on;
-};
-
-&dss {
- status = "okay";
- vdds_dsi-supply = <&vpll2>;
- vdda_video-supply = <&vpll2>;
- pinctrl-names = "default";
- pinctrl-0 = <&dss_dpi_pins1>;
- port {
- dpi_out: endpoint {
- remote-endpoint = <&lcd_in>;
- data-lines = <16>;
- };
- };
-};
-
-/ {
- aliases {
- display0 = &lcd0;
- };
-
- lcd0: display {
- /* This isn't the exact LCD, but the timings meet spec */
- compatible = "newhaven,nhd-4.3-480272ef-atxl";
- label = "15";
- pinctrl-names = "default";
- pinctrl-0 = <&panel_pwr_pins>;
- backlight = <&bl>;
- enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
- port {
- lcd_in: endpoint {
- remote-endpoint = <&dpi_out>;
- };
- };
- };
-
- bl: backlight {
- compatible = "pwm-backlight";
- pinctrl-names = "default";
- pinctrl-0 = <&backlight_pins>;
- pwms = <&pwm10 0 5000000 0>;
- brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
- default-brightness-level = <7>;
- enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
- };
-};
-
-&mmc1 {
- interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins &mmc1_cd>;
- cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio127 */
- vmmc-supply = <&vmmc1>;
- bus-width = <4>;
- cap-power-off-card;
-};
-
-&omap3_pmx_core {
- gpio_key_pins: pinmux_gpio_key_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
- OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
- >;
- };
-
- hdq_pins: hdq_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* hdq_sio */
- >;
- };
-
- pwm_pins: pinmux_pwm_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */
- >;
- };
-
- led_pins: pinmux_led_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */
- OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */
- >;
- };
-
- mmc1_pins: pinmux_mmc1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
- OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
- >;
- };
-
- tsc2004_pins: pinmux_tsc2004_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */
- >;
- };
-
- backlight_pins: pinmux_backlight_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */
- >;
- };
-
- isp_pins: pinmux_isp_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */
- OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */
- OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */
- OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */
-
- OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */
- OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */
- OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */
- OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */
- OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */
- OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */
- OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */
- OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */
- >;
- };
-
- panel_pwr_pins: pinmux_panel_pwr_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */
- >;
- };
-
- dss_dpi_pins1: pinmux_dss_dpi_pins1 {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */
- OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */
- OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */
- OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */
-
- OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */
- OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */
- OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */
- OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */
- OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */
- OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */
- OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */
- OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */
- OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */
- OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */
- OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */
- OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */
-
- OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */
- OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */
- OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */
- OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */
- OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */
- OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */
- >;
- };
-};
-
-&omap3_pmx_wkup {
- gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
- pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */
- OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */
- >;
- };
-
- lan9221_pins: pinmux_lan9221_pins {
- pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
- >;
- };
-
- mmc1_cd: pinmux_mmc1_cd {
- pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */
- >;
- };
-};
-
-&i2c2 {
- mt9p031 at 48 {
- compatible = "aptina,mt9p031";
- reg = <0x48>;
- clocks = <&isp 0>;
- vaa-supply = <&vaux4>;
- vdd-supply = <&vaux4>;
- vdd_io-supply = <&vaux4>;
- port {
- mt9p031_out: endpoint {
- input-clock-frequency = <24000000>;
- pixel-clock-frequency = <72000000>;
- remote-endpoint = <&ccdc_ep>;
- };
- };
- };
-};
-
-&i2c3 {
- touchscreen: tsc2004 at 48 {
- compatible = "ti,tsc2004";
- reg = <0x48>;
- vio-supply = <&vaux1>;
- pinctrl-names = "default";
- pinctrl-0 = <&tsc2004_pins>;
- interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
-
- touchscreen-fuzz-x = <4>;
- touchscreen-fuzz-y = <7>;
- touchscreen-fuzz-pressure = <2>;
- touchscreen-size-x = <4096>;
- touchscreen-size-y = <4096>;
- touchscreen-max-pressure = <2048>;
-
- ti,x-plate-ohms = <280>;
- ti,esd-recovery-timeout-ms = <8000>;
- };
-};
-
-&mcspi1 {
- at25 at 0 {
- compatible = "atmel,at25";
- reg = <0>;
- spi-max-frequency = <5000000>;
- spi-cpha;
- spi-cpol;
-
- pagesize = <64>;
- size = <32768>;
- address-width = <16>;
- };
-};
-
-&isp {
- pinctrl-names = "default";
- pinctrl-0 = <&isp_pins>;
- ports {
- port at 0 {
- reg = <0>;
- ccdc_ep: endpoint {
- remote-endpoint = <&mt9p031_out>;
- bus-width = <8>;
- hsync-active = <1>;
- vsync-active = <1>;
- pclk-sample = <0>;
- };
- };
- };
-};
-
-&uart1 {
- interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
-};
-
-/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
-&usb_otg_hs {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb_otg_pins>;
- interface-type = <0>;
- usb-phy = <&usb2_phy>;
- phys = <&usb2_phy>;
- phy-names = "usb2-phy";
- mode = <3>;
- power = <50>;
-};
diff --git a/arch/arm/dts/logicpd-torpedo-som.dtsi b/arch/arm/dts/logicpd-torpedo-som.dtsi
deleted file mode 100644
index 3a5228562b..0000000000
--- a/arch/arm/dts/logicpd-torpedo-som.dtsi
+++ /dev/null
@@ -1,203 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <dt-bindings/input/input.h>
-
-/ {
- chosen {
- stdout-path = &uart1;
- };
-
- cpus {
- cpu at 0 {
- cpu0-supply = <&vcc>;
- };
- };
-
- memory at 80000000 {
- device_type = "memory";
- reg = <0x80000000 0>;
- };
-
- leds {
- compatible = "gpio-leds";
- user0 {
- label = "user0";
- gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
- linux,default-trigger = "none";
- };
- };
-
- /* fixed 26MHz oscillator */
- hfclk_26m: oscillator {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <26000000>;
- };
-};
-
-/* The Torpedo doesn't route the USB host pins */
-&usbhshost {
- status = "disabled";
-};
-
-&gpmc {
- ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
-
- nand at 0,0 {
- compatible = "ti,omap2-nand";
- reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
- interrupt-parent = <&gpmc>;
- interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
- <1 IRQ_TYPE_NONE>; /* termcount */
- linux,mtd-name = "micron,mt29f4g16abbda3w";
- nand-bus-width = <16>;
- ti,nand-ecc-opt = "bch8";
- rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
- gpmc,sync-clk-ps = <0>;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <44>;
- gpmc,cs-wr-off-ns = <44>;
- gpmc,adv-on-ns = <6>;
- gpmc,adv-rd-off-ns = <34>;
- gpmc,adv-wr-off-ns = <44>;
- gpmc,we-off-ns = <40>;
- gpmc,oe-off-ns = <54>;
- gpmc,access-ns = <64>;
- gpmc,rd-cycle-ns = <82>;
- gpmc,wr-cycle-ns = <82>;
- gpmc,wr-access-ns = <40>;
- gpmc,wr-data-mux-bus-ns = <0>;
- gpmc,device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- clock-frequency = <2600000>;
-
- twl: twl at 48 {
- reg = <0x48>;
- interrupts = <7>; /* SYS_NIRQ cascaded to intc */
- interrupt-parent = <&intc>;
- clocks = <&hfclk_26m>;
- clock-names = "fck";
-
- twl_audio: audio {
- compatible = "ti,twl4030-audio";
- codec {
- };
- };
- };
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- clock-frequency = <400000>;
-};
-
-&i2c3 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins>;
- clock-frequency = <400000>;
- at24 at 50 {
- compatible = "atmel,24c64";
- readonly;
- reg = <0x50>;
- };
-};
-
-&omap3_pmx_core {
- mcbsp2_pins: pinmux_mcbsp2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */
- OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */
- OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */
- OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */
- >;
- };
- uart2_pins: pinmux_uart2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
- OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
- OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
- OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
- OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */
- >;
- };
- mcspi1_pins: pinmux_mcspi1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
- OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
- OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
- OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
- >;
- };
- hsusb_otg_pins: pinmux_hsusb_otg_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
- OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
- OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
- OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
-
- OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
- OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
- OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
- OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
- OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
- OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
- OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
- OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
- >;
- };
- i2c1_pins: pinmux_i2c1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
- OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
- >;
- };
- i2c2_pins: pinmux_i2c2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
- OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
- >;
- };
- i2c3_pins: pinmux_i2c3_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
- OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
- >;
- };
-};
-
-&uart2 {
- interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
-};
-
-&mcspi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi1_pins>;
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&twl {
- twl_power: power {
- compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
- ti,use_poweroff;
- };
-};
-
-&twl_gpio {
- ti,use-leds;
-};
-
-&twl_keypad {
- status = "disabled";
-};
diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig
index f9b8ac5c07..23b2e50338 100644
--- a/configs/omap35_logic_defconfig
+++ b/configs/omap35_logic_defconfig
@@ -9,7 +9,7 @@ CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
-CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-35xx-devkit"
+CONFIG_DEFAULT_DEVICE_TREE="ti/omap/logicpd-torpedo-35xx-devkit"
CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_OMAP3_LOGIC=y
# CONFIG_SPL_OMAP3_ID_NAND is not set
@@ -59,6 +59,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_ENV_OVERWRITE=y
# CONFIG_ENV_IS_IN_FAT is not set
CONFIG_ENV_IS_IN_NAND=y
diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
index 00c4d847d2..d081d4e0fb 100644
--- a/configs/omap3_logic_defconfig
+++ b/configs/omap3_logic_defconfig
@@ -9,7 +9,7 @@ CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
-CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-37xx-devkit"
+CONFIG_DEFAULT_DEVICE_TREE="ti/omap/logicpd-torpedo-37xx-devkit"
CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_OMAP3_LOGIC=y
# CONFIG_SPL_OMAP3_ID_NAND is not set
@@ -58,6 +58,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_ENV_OVERWRITE=y
# CONFIG_ENV_IS_IN_FAT is not set
CONFIG_ENV_IS_IN_NAND=y
--
2.43.0
More information about the U-Boot
mailing list