[PATCH 09/16] rockchip: rk356x: Remove redundant device tree files
Chris Morgan
macromorgan at hotmail.com
Sat May 4 22:51:33 CEST 2024
On Sat, May 04, 2024 at 07:43:01PM +0000, Jonas Karlman wrote:
> Remove redundant device tree files now that RK356x boards have been
> migrated to use OF_UPSTREAM.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
> ---
> arch/arm/dts/rk3566-anbernic-rgxx3.dtsi | 788 ------
> arch/arm/dts/rk3566-quartz64-a.dts | 838 ------
> arch/arm/dts/rk3566-quartz64-b.dts | 737 -----
> arch/arm/dts/rk3566-radxa-cm3-io.dts | 281 --
> arch/arm/dts/rk3566-radxa-cm3.dtsi | 425 ---
> arch/arm/dts/rk3566-soquartz-blade.dts | 198 --
> arch/arm/dts/rk3566-soquartz-cm4.dts | 196 --
> arch/arm/dts/rk3566-soquartz-model-a.dts | 236 --
> arch/arm/dts/rk3566-soquartz.dtsi | 684 -----
> arch/arm/dts/rk3566.dtsi | 35 -
> arch/arm/dts/rk3568-bpi-r2-pro.dts | 852 ------
> arch/arm/dts/rk3568-evb.dts | 689 -----
> arch/arm/dts/rk3568-lubancat-2.dts | 730 -----
> arch/arm/dts/rk3568-nanopi-r5c.dts | 112 -
> arch/arm/dts/rk3568-nanopi-r5s.dts | 136 -
> arch/arm/dts/rk3568-nanopi-r5s.dtsi | 587 ----
> arch/arm/dts/rk3568-odroid-m1.dts | 741 -----
> arch/arm/dts/rk3568-pinctrl.dtsi | 3214 ----------------------
> arch/arm/dts/rk3568-radxa-cm3i.dtsi | 412 ---
> arch/arm/dts/rk3568-radxa-e25.dts | 236 --
> arch/arm/dts/rk3568-rock-3a.dts | 859 ------
> arch/arm/dts/rk3568.dtsi | 267 --
> arch/arm/dts/rk356x.dtsi | 1886 -------------
> include/dt-bindings/clock/rk3568-cru.h | 926 -------
> include/dt-bindings/power/rk3568-power.h | 32 -
> 25 files changed, 16097 deletions(-)
> delete mode 100644 arch/arm/dts/rk3566-anbernic-rgxx3.dtsi
> delete mode 100644 arch/arm/dts/rk3566-quartz64-a.dts
> delete mode 100644 arch/arm/dts/rk3566-quartz64-b.dts
> delete mode 100644 arch/arm/dts/rk3566-radxa-cm3-io.dts
> delete mode 100644 arch/arm/dts/rk3566-radxa-cm3.dtsi
> delete mode 100644 arch/arm/dts/rk3566-soquartz-blade.dts
> delete mode 100644 arch/arm/dts/rk3566-soquartz-cm4.dts
> delete mode 100644 arch/arm/dts/rk3566-soquartz-model-a.dts
> delete mode 100644 arch/arm/dts/rk3566-soquartz.dtsi
> delete mode 100644 arch/arm/dts/rk3566.dtsi
> delete mode 100644 arch/arm/dts/rk3568-bpi-r2-pro.dts
> delete mode 100644 arch/arm/dts/rk3568-evb.dts
> delete mode 100644 arch/arm/dts/rk3568-lubancat-2.dts
> delete mode 100644 arch/arm/dts/rk3568-nanopi-r5c.dts
> delete mode 100644 arch/arm/dts/rk3568-nanopi-r5s.dts
> delete mode 100644 arch/arm/dts/rk3568-nanopi-r5s.dtsi
> delete mode 100644 arch/arm/dts/rk3568-odroid-m1.dts
> delete mode 100644 arch/arm/dts/rk3568-pinctrl.dtsi
> delete mode 100644 arch/arm/dts/rk3568-radxa-cm3i.dtsi
> delete mode 100644 arch/arm/dts/rk3568-radxa-e25.dts
> delete mode 100644 arch/arm/dts/rk3568-rock-3a.dts
> delete mode 100644 arch/arm/dts/rk3568.dtsi
> delete mode 100644 arch/arm/dts/rk356x.dtsi
> delete mode 100644 include/dt-bindings/clock/rk3568-cru.h
> delete mode 100644 include/dt-bindings/power/rk3568-power.h
>
> diff --git a/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi b/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi
> deleted file mode 100644
Can we remove this since a non-upstream device tree depends on it?
Thank you,
Chris
> index 8cbf3d9a4f22..000000000000
> --- a/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi
> +++ /dev/null
> @@ -1,788 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -
> -/dts-v1/;
> -
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/input/linux-event-codes.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include <dt-bindings/soc/rockchip,vop2.h>
> -#include "rk3566.dtsi"
> -
> -/ {
> - chosen: chosen {
> - stdout-path = "serial2:1500000n8";
> - };
> -
> - adc-joystick {
> - compatible = "adc-joystick";
> - io-channels = <&adc_mux 0>,
> - <&adc_mux 1>,
> - <&adc_mux 2>,
> - <&adc_mux 3>;
> - pinctrl-0 = <&joy_mux_en>;
> - pinctrl-names = "default";
> - poll-interval = <60>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - axis at 0 {
> - reg = <0>;
> - abs-flat = <32>;
> - abs-fuzz = <32>;
> - abs-range = <1023 15>;
> - linux,code = <ABS_X>;
> - };
> -
> - axis at 1 {
> - reg = <1>;
> - abs-flat = <32>;
> - abs-fuzz = <32>;
> - abs-range = <15 1023>;
> - linux,code = <ABS_RX>;
> - };
> -
> - axis at 2 {
> - reg = <2>;
> - abs-flat = <32>;
> - abs-fuzz = <32>;
> - abs-range = <15 1023>;
> - linux,code = <ABS_Y>;
> - };
> -
> - axis at 3 {
> - reg = <3>;
> - abs-flat = <32>;
> - abs-fuzz = <32>;
> - abs-range = <1023 15>;
> - linux,code = <ABS_RY>;
> - };
> - };
> -
> - adc_keys: adc-keys {
> - compatible = "adc-keys";
> - io-channels = <&saradc 0>;
> - io-channel-names = "buttons";
> - keyup-threshold-microvolt = <1800000>;
> - poll-interval = <60>;
> -
> - /*
> - * Button is mapped to F key in BSP kernel, but
> - * according to input guidelines it should be mode.
> - */
> - button-mode {
> - label = "MODE";
> - linux,code = <BTN_MODE>;
> - press-threshold-microvolt = <1750>;
> - };
> - };
> -
> - adc_mux: adc-mux {
> - compatible = "io-channel-mux";
> - channels = "left_x", "right_x", "left_y", "right_y";
> - #io-channel-cells = <1>;
> - io-channels = <&saradc 3>;
> - io-channel-names = "parent";
> - mux-controls = <&gpio_mux>;
> - settle-time-us = <100>;
> - };
> -
> - gpio_keys_control: gpio-keys-control {
> - compatible = "gpio-keys";
> - pinctrl-0 = <&btn_pins_ctrl>;
> - pinctrl-names = "default";
> -
> - button-b {
> - gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
> - label = "SOUTH";
> - linux,code = <BTN_SOUTH>;
> - };
> -
> - button-down {
> - gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
> - label = "DPAD-DOWN";
> - linux,code = <BTN_DPAD_DOWN>;
> - };
> -
> - button-l1 {
> - gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
> - label = "TL";
> - linux,code = <BTN_TL>;
> - };
> -
> - button-l2 {
> - gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
> - label = "TL2";
> - linux,code = <BTN_TL2>;
> - };
> -
> - button-select {
> - gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
> - label = "SELECT";
> - linux,code = <BTN_SELECT>;
> - };
> -
> - button-start {
> - gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
> - label = "START";
> - linux,code = <BTN_START>;
> - };
> -
> - button-thumbl {
> - gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
> - label = "THUMBL";
> - linux,code = <BTN_THUMBL>;
> - };
> -
> - button-thumbr {
> - gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
> - label = "THUMBR";
> - linux,code = <BTN_THUMBR>;
> - };
> -
> - button-up {
> - gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
> - label = "DPAD-UP";
> - linux,code = <BTN_DPAD_UP>;
> - };
> -
> - button-x {
> - gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
> - label = "NORTH";
> - linux,code = <BTN_NORTH>;
> - };
> - };
> -
> - gpio_keys_vol: gpio-keys-vol {
> - compatible = "gpio-keys";
> - autorepeat;
> - pinctrl-0 = <&btn_pins_vol>;
> - pinctrl-names = "default";
> -
> - button-vol-down {
> - gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
> - label = "VOLUMEDOWN";
> - linux,code = <KEY_VOLUMEDOWN>;
> - };
> -
> - button-vol-up {
> - gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
> - label = "VOLUMEUP";
> - linux,code = <KEY_VOLUMEUP>;
> - };
> - };
> -
> - gpio_mux: mux-controller {
> - compatible = "gpio-mux";
> - mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
> - <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
> - #mux-control-cells = <0>;
> - };
> -
> - hdmi-con {
> - compatible = "hdmi-connector";
> - ddc-i2c-bus = <&i2c5>;
> - type = "c";
> -
> - port {
> - hdmi_con_in: endpoint {
> - remote-endpoint = <&hdmi_out_con>;
> - };
> - };
> - };
> -
> - leds: pwm-leds {
> - compatible = "pwm-leds";
> -
> - green_led: led-0 {
> - color = <LED_COLOR_ID_GREEN>;
> - default-state = "on";
> - function = LED_FUNCTION_POWER;
> - max-brightness = <255>;
> - pwms = <&pwm6 0 25000 0>;
> - };
> -
> - amber_led: led-1 {
> - color = <LED_COLOR_ID_AMBER>;
> - function = LED_FUNCTION_CHARGING;
> - max-brightness = <255>;
> - pwms = <&pwm7 0 25000 0>;
> - };
> -
> - red_led: led-2 {
> - color = <LED_COLOR_ID_RED>;
> - default-state = "off";
> - function = LED_FUNCTION_STATUS;
> - max-brightness = <255>;
> - pwms = <&pwm0 0 25000 0>;
> - };
> - };
> -
> - sdio_pwrseq: sdio-pwrseq {
> - compatible = "mmc-pwrseq-simple";
> - clocks = <&rk817 1>;
> - clock-names = "ext_clock";
> - pinctrl-0 = <&wifi_enable_h>;
> - pinctrl-names = "default";
> - post-power-on-delay-ms = <200>;
> - reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
> - };
> -
> - vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
> - compatible = "regulator-fixed";
> - gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
> - enable-active-high;
> - pinctrl-0 = <&vcc_lcd_h>;
> - pinctrl-names = "default";
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "vcc3v3_lcd0_n";
> - vin-supply = <&vcc_3v3>;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_sys: regulator-vcc-sys {
> - compatible = "regulator-fixed";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3800000>;
> - regulator-max-microvolt = <3800000>;
> - regulator-name = "vcc_sys";
> - };
> -
> - vcc_wifi: regulator-vcc-wifi {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
> - pinctrl-0 = <&vcc_wifi_h>;
> - pinctrl-names = "default";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "vcc_wifi";
> - };
> -
> - vibrator: pwm-vibrator {
> - compatible = "pwm-vibrator";
> - pwm-names = "enable";
> - pwms = <&pwm5 0 1000000000 0>;
> - };
> -};
> -
> -&combphy1 {
> - status = "okay";
> -};
> -
> -&cpu0 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu1 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu2 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu3 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&gpu {
> - mali-supply = <&vdd_gpu>;
> - status = "okay";
> -};
> -
> -&hdmi {
> - ddc-i2c-bus = <&i2c5>;
> - pinctrl-0 = <&hdmitxm0_cec>;
> - pinctrl-names = "default";
> - status = "okay";
> -};
> -
> -&hdmi_in {
> - hdmi_in_vp0: endpoint {
> - remote-endpoint = <&vp0_out_hdmi>;
> - };
> -};
> -
> -&hdmi_out {
> - hdmi_out_con: endpoint {
> - remote-endpoint = <&hdmi_con_in>;
> - };
> -};
> -
> -&hdmi_sound {
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> -
> - rk817: pmic at 20 {
> - compatible = "rockchip,rk817";
> - reg = <0x20>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> - clock-output-names = "rk808-clkout1", "rk808-clkout2";
> - clock-names = "mclk";
> - clocks = <&cru I2S1_MCLKOUT_TX>;
> - assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
> - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
> - #clock-cells = <1>;
> - #sound-dai-cells = <0>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
> - wakeup-source;
> -
> - vcc1-supply = <&vcc_sys>;
> - vcc2-supply = <&vcc_sys>;
> - vcc3-supply = <&vcc_sys>;
> - vcc4-supply = <&vcc_sys>;
> - vcc5-supply = <&vcc_sys>;
> - vcc6-supply = <&vcc_sys>;
> - vcc7-supply = <&vcc_sys>;
> - vcc8-supply = <&vcc_sys>;
> - vcc9-supply = <&dcdc_boost>;
> -
> - regulators {
> - vdd_logic: DCDC_REG1 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> - regulator-initial-mode = <0x2>;
> - regulator-name = "vdd_logic";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vdd_gpu: DCDC_REG2 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> - regulator-initial-mode = <0x2>;
> - regulator-name = "vdd_gpu";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_ddr: DCDC_REG3 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> - regulator-name = "vcc_ddr";
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - };
> - };
> -
> - vcc_3v3: DCDC_REG4 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-initial-mode = <0x2>;
> - regulator-name = "vcc_3v3";
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcca1v8_pmu: LDO_REG1 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-name = "vcca1v8_pmu";
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vdda_0v9: LDO_REG2 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - regulator-name = "vdda_0v9";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_pmu: LDO_REG3 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - regulator-name = "vdda0v9_pmu";
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vccio_acodec: LDO_REG4 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "vccio_acodec";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vccio_sd: LDO_REG5 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "vccio_sd";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_pmu: LDO_REG6 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "vcc3v3_pmu";
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcc_1v8: LDO_REG7 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-name = "vcc_1v8";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc1v8_dvp: LDO_REG8 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "vcc1v8_dvp";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc2v8_dvp: LDO_REG9 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <2800000>;
> - regulator-name = "vcc2v8_dvp";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - dcdc_boost: BOOST {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <4700000>;
> - regulator-max-microvolt = <5400000>;
> - regulator-name = "boost";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - otg_switch: OTG_SWITCH {
> - regulator-name = "otg_switch";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> - };
> - };
> -
> - vdd_cpu: regulator at 40 {
> - compatible = "fcs,fan53555";
> - reg = <0x40>;
> - fcs,suspend-voltage-selector = <1>;
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <712500>;
> - regulator-max-microvolt = <1390000>;
> - regulator-name = "vdd_cpu";
> - regulator-ramp-delay = <2300>;
> - vin-supply = <&vcc_sys>;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -};
> -
> -&i2c1 {
> - /* Unknown/unused device at 0x3c */
> - status = "disabled";
> -};
> -
> -&i2c5 {
> - pinctrl-0 = <&i2c5m1_xfer>;
> - pinctrl-names = "default";
> - status = "okay";
> -};
> -
> -&i2s0_8ch {
> - status = "okay";
> -};
> -
> -&i2s1_8ch {
> - pinctrl-0 = <&i2s1m0_sclktx
> - &i2s1m0_lrcktx
> - &i2s1m0_sdi0
> - &i2s1m0_sdo0>;
> - pinctrl-names = "default";
> - rockchip,trcm-sync-tx-only;
> - status = "okay";
> -};
> -
> -&pinctrl {
> - gpio-btns {
> - btn_pins_ctrl: btn-pins-ctrl {
> - rockchip,pins =
> - <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> -
> - btn_pins_vol: btn-pins-vol {
> - rockchip,pins =
> - <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
> - <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - joy-mux {
> - joy_mux_en: joy-mux-en {
> - rockchip,pins =
> - <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
> - };
> - };
> -
> - pmic {
> - pmic_int_l: pmic-int-l {
> - rockchip,pins =
> - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - sdio-pwrseq {
> - wifi_enable_h: wifi-enable-h {
> - rockchip,pins =
> - <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - vcc3v3-lcd {
> - vcc_lcd_h: vcc-lcd-h {
> - rockchip,pins =
> - <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - vcc-wifi {
> - vcc_wifi_h: vcc-wifi-h {
> - rockchip,pins =
> - <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -&pmu_io_domains {
> - status = "okay";
> - pmuio1-supply = <&vcc3v3_pmu>;
> - pmuio2-supply = <&vcc3v3_pmu>;
> - vccio1-supply = <&vccio_acodec>;
> - vccio3-supply = <&vccio_sd>;
> - vccio4-supply = <&vcc_1v8>;
> - vccio5-supply = <&vcc_3v3>;
> - vccio6-supply = <&vcc1v8_dvp>;
> - vccio7-supply = <&vcc_3v3>;
> -};
> -
> -&pwm0 {
> - pinctrl-0 = <&pwm0m1_pins>;
> - pinctrl-names = "default";
> - status = "okay";
> -};
> -
> -&pwm5 {
> - status = "okay";
> -};
> -
> -&pwm6 {
> - status = "okay";
> -};
> -
> -&pwm7 {
> - status = "okay";
> -};
> -
> -&saradc {
> - vref-supply = <&vcc_1v8>;
> - status = "okay";
> -};
> -
> -&sdmmc0 {
> - bus-width = <4>;
> - cap-sd-highspeed;
> - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> - disable-wp;
> - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> - pinctrl-names = "default";
> - sd-uhs-sdr104;
> - vmmc-supply = <&vcc_3v3>;
> - vqmmc-supply = <&vccio_sd>;
> - status = "okay";
> -};
> -
> -&sdmmc1 {
> - bus-width = <4>;
> - cap-sd-highspeed;
> - cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
> - disable-wp;
> - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
> - pinctrl-names = "default";
> - sd-uhs-sdr104;
> - vmmc-supply = <&vcc_3v3>;
> - vqmmc-supply = <&vcc1v8_dvp>;
> - status = "okay";
> -};
> -
> -&sdmmc2 {
> - bus-width = <4>;
> - cap-sd-highspeed;
> - cap-sdio-irq;
> - keep-power-in-suspend;
> - mmc-pwrseq = <&sdio_pwrseq>;
> - non-removable;
> - pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
> - pinctrl-names = "default";
> - vmmc-supply = <&vcc_wifi>;
> - vqmmc-supply = <&vcca1v8_pmu>;
> - status = "okay";
> -};
> -
> -&tsadc {
> - rockchip,hw-tshut-mode = <1>;
> - rockchip,hw-tshut-polarity = <0>;
> - status = "okay";
> -};
> -
> -&uart1 {
> - pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
> - pinctrl-names = "default";
> - uart-has-rtscts;
> - status = "okay";
> -
> - bluetooth {
> - compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
> - device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
> - enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
> - host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
> - };
> -};
> -
> -&uart2 {
> - status = "okay";
> -};
> -
> -/*
> - * Lack the schematics to verify, but port works as a peripheral
> - * (and not a host or OTG port).
> - */
> -&usb_host0_xhci {
> - dr_mode = "peripheral";
> - phys = <&usb2phy0_otg>;
> - phy-names = "usb2-phy";
> - status = "okay";
> -};
> -
> -&usb_host1_ehci {
> - status = "okay";
> -};
> -
> -&usb_host1_ohci {
> - status = "okay";
> -};
> -
> -&usb_host1_xhci {
> - phy-names = "usb2-phy", "usb3-phy";
> - phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
> - status = "okay";
> -};
> -
> -&usb2phy0 {
> - status = "okay";
> -};
> -
> -&usb2phy0_otg {
> - status = "okay";
> -};
> -
> -&usb2phy1 {
> - status = "okay";
> -};
> -
> -&usb2phy1_host {
> - status = "okay";
> -};
> -
> -&vop {
> - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> - status = "okay";
> -};
> -
> -&vop_mmu {
> - status = "okay";
> -};
> -
> -&vp0 {
> - vp0_out_hdmi: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
> - reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> - remote-endpoint = <&hdmi_in_vp0>;
> - };
> -};
> diff --git a/arch/arm/dts/rk3566-quartz64-a.dts b/arch/arm/dts/rk3566-quartz64-a.dts
> deleted file mode 100644
> index 59843a7a199c..000000000000
> --- a/arch/arm/dts/rk3566-quartz64-a.dts
> +++ /dev/null
> @@ -1,838 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -
> -/dts-v1/;
> -
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include <dt-bindings/soc/rockchip,vop2.h>
> -#include "rk3566.dtsi"
> -
> -/ {
> - model = "Pine64 RK3566 Quartz64-A Board";
> - compatible = "pine64,quartz64-a", "rockchip,rk3566";
> -
> - aliases {
> - ethernet0 = &gmac1;
> - mmc0 = &sdmmc0;
> - mmc1 = &sdhci;
> - };
> -
> - chosen: chosen {
> - stdout-path = "serial2:1500000n8";
> - };
> -
> - gmac1_clkin: external-gmac1-clock {
> - compatible = "fixed-clock";
> - clock-frequency = <125000000>;
> - clock-output-names = "gmac1_clkin";
> - #clock-cells = <0>;
> - };
> -
> - fan: gpio_fan {
> - compatible = "gpio-fan";
> - gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> - gpio-fan,speed-map =
> - < 0 0>,
> - <4500 1>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&fan_en_h>;
> - #cooling-cells = <2>;
> - };
> -
> - hdmi-con {
> - compatible = "hdmi-connector";
> - type = "a";
> -
> - port {
> - hdmi_con_in: endpoint {
> - remote-endpoint = <&hdmi_out_con>;
> - };
> - };
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> -
> - led-work {
> - label = "work-led";
> - default-state = "off";
> - gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&work_led_enable_h>;
> - retain-state-suspended;
> - };
> -
> - led-diy {
> - label = "diy-led";
> - default-state = "on";
> - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "heartbeat";
> - pinctrl-names = "default";
> - pinctrl-0 = <&diy_led_enable_h>;
> - retain-state-suspended;
> - };
> - };
> -
> - rk817-sound {
> - compatible = "simple-audio-card";
> - simple-audio-card,format = "i2s";
> - simple-audio-card,name = "Analog RK817";
> - simple-audio-card,mclk-fs = <256>;
> -
> - simple-audio-card,cpu {
> - sound-dai = <&i2s1_8ch>;
> - };
> -
> - simple-audio-card,codec {
> - sound-dai = <&rk817>;
> - };
> - };
> -
> - sdio_pwrseq: sdio-pwrseq {
> - compatible = "mmc-pwrseq-simple";
> - clocks = <&rk817 1>;
> - clock-names = "ext_clock";
> - pinctrl-names = "default";
> - pinctrl-0 = <&wifi_enable_h>;
> - post-power-on-delay-ms = <100>;
> - power-off-delay-us = <5000000>;
> - reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
> - };
> -
> - spdif_dit: spdif-dit {
> - compatible = "linux,spdif-dit";
> - #sound-dai-cells = <0>;
> - };
> -
> - spdif_sound: spdif-sound {
> - compatible = "simple-audio-card";
> - simple-audio-card,name = "SPDIF";
> -
> - simple-audio-card,cpu {
> - sound-dai = <&spdif>;
> - };
> -
> - simple-audio-card,codec {
> - sound-dai = <&spdif_dit>;
> - };
> - };
> -
> - vcc12v_dcin: vcc12v_dcin {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc12v_dcin";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - };
> -
> - /* vbus feeds the rk817 usb input.
> - * With no battery attached, also feeds vcc_bat+
> - * via ON/OFF_BAT jumper
> - */
> - vbus: vbus {
> - compatible = "regulator-fixed";
> - regulator-name = "vbus";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc12v_dcin>;
> - };
> -
> - vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie_enable_h>;
> - regulator-name = "vcc3v3_pcie_p";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc_3v3>;
> - };
> -
> - vcc5v0_usb: vcc5v0_usb {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_usb";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc12v_dcin>;
> - };
> -
> - /* all four ports are controlled by one gpio
> - * the host ports are sourced from vcc5v0_usb
> - * the otg port is sourced from vcc5v0_midu
> - */
> - vcc5v0_usb20_host: vcc5v0_usb20_host {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb20_host_en>;
> - regulator-name = "vcc5v0_usb20_host";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_usb>;
> - };
> -
> - vcc5v0_usb20_otg: vcc5v0_usb20_otg {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
> - regulator-name = "vcc5v0_usb20_otg";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&dcdc_boost>;
> - };
> -
> - vcc3v3_sd: vcc3v3_sd {
> - compatible = "regulator-fixed";
> - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc_sd_h>;
> - regulator-boot-on;
> - regulator-name = "vcc3v3_sd";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc_3v3>;
> - };
> -
> - /* sourced from vbus and vcc_bat+ via rk817 sw5 */
> - vcc_sys: vcc_sys {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <4400000>;
> - regulator-max-microvolt = <4400000>;
> - vin-supply = <&vbus>;
> - };
> -
> - /* sourced from vcc_sys, sdio module operates internally at 3.3v */
> - vcc_wl: vcc_wl {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc_wl";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc_sys>;
> - };
> -};
> -
> -&combphy1 {
> - status = "okay";
> -};
> -
> -&combphy2 {
> - status = "okay";
> -};
> -
> -&cpu0 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu1 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu2 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu3 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu_thermal {
> - trips {
> - cpu_hot: cpu_hot {
> - temperature = <55000>;
> - hysteresis = <2000>;
> - type = "active";
> - };
> - };
> -
> - cooling-maps {
> - map1 {
> - trip = <&cpu_hot>;
> - cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - };
> -};
> -
> -&gmac1 {
> - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
> - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
> - clock_in_out = "input";
> - phy-supply = <&vcc_3v3>;
> - phy-mode = "rgmii";
> - pinctrl-names = "default";
> - pinctrl-0 = <&gmac1m0_miim
> - &gmac1m0_tx_bus2
> - &gmac1m0_rx_bus2
> - &gmac1m0_rgmii_clk
> - &gmac1m0_clkinout
> - &gmac1m0_rgmii_bus>;
> - snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
> - snps,reset-active-low;
> - /* Reset time is 20ms, 100ms for rtl8211f */
> - snps,reset-delays-us = <0 20000 100000>;
> - tx_delay = <0x30>;
> - rx_delay = <0x10>;
> - phy-handle = <&rgmii_phy1>;
> - status = "okay";
> -};
> -
> -&gpu {
> - mali-supply = <&vdd_gpu>;
> - status = "okay";
> -};
> -
> -&hdmi {
> - avdd-0v9-supply = <&vdda_0v9>;
> - avdd-1v8-supply = <&vcc_1v8>;
> - status = "okay";
> -};
> -
> -&hdmi_in {
> - hdmi_in_vp0: endpoint {
> - remote-endpoint = <&vp0_out_hdmi>;
> - };
> -};
> -
> -&hdmi_out {
> - hdmi_out_con: endpoint {
> - remote-endpoint = <&hdmi_con_in>;
> - };
> -};
> -
> -&hdmi_sound {
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> -
> - vdd_cpu: regulator at 1c {
> - compatible = "tcs,tcs4525";
> - reg = <0x1c>;
> - fcs,suspend-voltage-selector = <1>;
> - regulator-name = "vdd_cpu";
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1150000>;
> - regulator-ramp-delay = <2300>;
> - regulator-always-on;
> - regulator-boot-on;
> - vin-supply = <&vcc_sys>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - rk817: pmic at 20 {
> - compatible = "rockchip,rk817";
> - reg = <0x20>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> - assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
> - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
> - clock-names = "mclk";
> - clocks = <&cru I2S1_MCLKOUT_TX>;
> - clock-output-names = "rk808-clkout1", "rk808-clkout2";
> - #clock-cells = <1>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
> - rockchip,system-power-controller;
> - #sound-dai-cells = <0>;
> - wakeup-source;
> -
> - vcc1-supply = <&vcc_sys>;
> - vcc2-supply = <&vcc_sys>;
> - vcc3-supply = <&vcc_sys>;
> - vcc4-supply = <&vcc_sys>;
> - vcc5-supply = <&vcc_sys>;
> - vcc6-supply = <&vcc_sys>;
> - vcc7-supply = <&vcc_sys>;
> - vcc8-supply = <&vcc_sys>;
> - vcc9-supply = <&dcdc_boost>;
> -
> - regulators {
> - vdd_logic: DCDC_REG1 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> - regulator-initial-mode = <0x2>;
> - regulator-name = "vdd_logic";
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vdd_gpu: DCDC_REG2 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> - regulator-initial-mode = <0x2>;
> - regulator-name = "vdd_gpu";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_ddr: DCDC_REG3 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> - regulator-name = "vcc_ddr";
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - };
> - };
> -
> - vcc_3v3: DCDC_REG4 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-initial-mode = <0x2>;
> - regulator-name = "vcc_3v3";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcca1v8_pmu: LDO_REG1 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-name = "vcca1v8_pmu";
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vdda_0v9: LDO_REG2 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - regulator-name = "vdda_0v9";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_pmu: LDO_REG3 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - regulator-name = "vdda0v9_pmu";
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vccio_acodec: LDO_REG4 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "vccio_acodec";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vccio_sd: LDO_REG5 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "vccio_sd";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_pmu: LDO_REG6 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "vcc3v3_pmu";
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcc_1v8: LDO_REG7 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-name = "vcc_1v8";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc1v8_dvp: LDO_REG8 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-name = "vcc1v8_dvp";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc2v8_dvp: LDO_REG9 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <2800000>;
> - regulator-name = "vcc2v8_dvp";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - dcdc_boost: BOOST {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - regulator-name = "boost";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - otg_switch: OTG_SWITCH {
> - regulator-name = "otg_switch";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> - };
> - };
> -};
> -
> -/* i2c3 is exposed on con40
> - * pin 3 - i2c3_sda_m0, pullup to vcc_3v3
> - * pin 5 - i2c3_scl_m0, pullup to vcc_3v3
> - */
> -&i2c3 {
> - status = "okay";
> -};
> -
> -&i2s0_8ch {
> - status = "okay";
> -};
> -
> -&i2s1_8ch {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2s1m0_sclktx
> - &i2s1m0_lrcktx
> - &i2s1m0_sdi0
> - &i2s1m0_sdo0>;
> - rockchip,trcm-sync-tx-only;
> - status = "okay";
> -};
> -
> -&mdio1 {
> - rgmii_phy1: ethernet-phy at 0 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <0>;
> - };
> -};
> -
> -&pcie2x1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie_reset_h>;
> - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_pcie_p>;
> - status = "okay";
> -};
> -
> -&pinctrl {
> - bt {
> - bt_enable_h: bt-enable-h {
> - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - bt_host_wake_l: bt-host-wake-l {
> - rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
> - };
> -
> - bt_wake_l: bt-wake-l {
> - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - fan {
> - fan_en_h: fan-en-h {
> - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - leds {
> - work_led_enable_h: work-led-enable-h {
> - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - diy_led_enable_h: diy-led-enable-h {
> - rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pcie {
> - pcie_enable_h: pcie-enable-h {
> - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - pcie_reset_h: pcie-reset-h {
> - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pmic {
> - pmic_int_l: pmic-int-l {
> - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - usb2 {
> - vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
> - rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - sdio-pwrseq {
> - wifi_enable_h: wifi-enable-h {
> - rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - vcc_sd {
> - vcc_sd_h: vcc-sd-h {
> - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -&pmu_io_domains {
> - pmuio1-supply = <&vcc3v3_pmu>;
> - pmuio2-supply = <&vcc3v3_pmu>;
> - vccio1-supply = <&vccio_acodec>;
> - vccio2-supply = <&vcc_1v8>;
> - vccio3-supply = <&vccio_sd>;
> - vccio4-supply = <&vcc_1v8>;
> - vccio5-supply = <&vcc_3v3>;
> - vccio6-supply = <&vcc1v8_dvp>;
> - vccio7-supply = <&vcc_3v3>;
> - status = "okay";
> -};
> -
> -&sdhci {
> - bus-width = <8>;
> - mmc-hs200-1_8v;
> - non-removable;
> - vmmc-supply = <&vcc_3v3>;
> - vqmmc-supply = <&vcc_1v8>;
> - status = "okay";
> -};
> -
> -&sdmmc0 {
> - bus-width = <4>;
> - cap-sd-highspeed;
> - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> - disable-wp;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> - sd-uhs-sdr104;
> - vmmc-supply = <&vcc3v3_sd>;
> - vqmmc-supply = <&vccio_sd>;
> - status = "okay";
> -};
> -
> -&sdmmc1 {
> - bus-width = <4>;
> - cap-sd-highspeed;
> - cap-sdio-irq;
> - keep-power-in-suspend;
> - mmc-pwrseq = <&sdio_pwrseq>;
> - non-removable;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
> - sd-uhs-sdr104;
> - vmmc-supply = <&vcc_wl>;
> - vqmmc-supply = <&vcc_1v8>;
> - status = "okay";
> -};
> -
> -&sfc {
> - pinctrl-0 = <&fspi_pins>;
> - pinctrl-names = "default";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> -
> - flash at 0 {
> - compatible = "jedec,spi-nor";
> - reg = <0>;
> - spi-max-frequency = <24000000>;
> - spi-rx-bus-width = <4>;
> - spi-tx-bus-width = <1>;
> - };
> -};
> -
> -/* spdif is exposed on con40 pin 18 */
> -&spdif {
> - status = "okay";
> -};
> -
> -/* spi1 is exposed on con40
> - * pin 11 - spi1_mosi_m1
> - * pin 13 - spi1_miso_m1
> - * pin 15 - spi1_clk_m1
> - * pin 17 - spi1_cs0_m1
> - */
> -&spi1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
> -};
> -
> -&tsadc {
> - /* tshut mode 0:CRU 1:GPIO */
> - rockchip,hw-tshut-mode = <1>;
> - /* tshut polarity 0:LOW 1:HIGH */
> - rockchip,hw-tshut-polarity = <0>;
> - status = "okay";
> -};
> -
> -/* uart0 is exposed on con40
> - * pin 12 - uart0_tx
> - * pin 14 - uart0_rx
> - */
> -&uart0 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart0_xfer>;
> - status = "okay";
> -};
> -
> -&uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
> - status = "okay";
> - uart-has-rtscts;
> -
> - bluetooth {
> - compatible = "brcm,bcm43438-bt";
> - clocks = <&rk817 1>;
> - clock-names = "lpo";
> - host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
> - device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
> - shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
> - vbat-supply = <&vcc_sys>;
> - vddio-supply = <&vcca1v8_pmu>;
> - max-speed = <3000000>;
> - };
> -};
> -
> -/* uart2 is exposed on con40
> - * pin 8 - uart2_tx_m0_debug
> - * pin 10 - uart2_rx_m0_debug
> - */
> -&uart2 {
> - status = "okay";
> -};
> -
> -&usb_host0_ehci {
> - status = "okay";
> -};
> -
> -&usb_host0_ohci {
> - status = "okay";
> -};
> -
> -&usb_host1_ehci {
> - status = "okay";
> -};
> -
> -&usb_host1_ohci {
> - status = "okay";
> -};
> -
> -&usb_host0_xhci {
> - dr_mode = "host";
> - status = "okay";
> -};
> -
> -/* usb3 controller is muxed with sata1 */
> -&usb_host1_xhci {
> - status = "okay";
> -};
> -
> -&usb2phy0 {
> - status = "okay";
> -};
> -
> -&usb2phy0_host {
> - phy-supply = <&vcc5v0_usb20_host>;
> - status = "okay";
> -};
> -
> -&usb2phy0_otg {
> - phy-supply = <&vcc5v0_usb20_otg>;
> - status = "okay";
> -};
> -
> -&usb2phy1 {
> - status = "okay";
> -};
> -
> -&usb2phy1_host {
> - phy-supply = <&vcc5v0_usb20_host>;
> - status = "okay";
> -};
> -
> -&usb2phy1_otg {
> - phy-supply = <&vcc5v0_usb20_host>;
> - status = "okay";
> -};
> -
> -&vop {
> - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> - status = "okay";
> -};
> -
> -&vop_mmu {
> - status = "okay";
> -};
> -
> -&vp0 {
> - vp0_out_hdmi: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
> - reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> - remote-endpoint = <&hdmi_in_vp0>;
> - };
> -};
> diff --git a/arch/arm/dts/rk3566-quartz64-b.dts b/arch/arm/dts/rk3566-quartz64-b.dts
> deleted file mode 100644
> index 2d92713be2a0..000000000000
> --- a/arch/arm/dts/rk3566-quartz64-b.dts
> +++ /dev/null
> @@ -1,737 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -
> -/dts-v1/;
> -
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include <dt-bindings/soc/rockchip,vop2.h>
> -#include "rk3566.dtsi"
> -
> -/ {
> - model = "Pine64 RK3566 Quartz64-B Board";
> - compatible = "pine64,quartz64-b", "rockchip,rk3566";
> -
> - aliases {
> - ethernet0 = &gmac1;
> - mmc0 = &sdmmc0;
> - mmc1 = &sdhci;
> - mmc2 = &sdmmc1;
> - };
> -
> - chosen: chosen {
> - stdout-path = "serial2:1500000n8";
> - };
> -
> - gmac1_clkin: external-gmac1-clock {
> - compatible = "fixed-clock";
> - clock-frequency = <125000000>;
> - clock-output-names = "gmac1_clkin";
> - #clock-cells = <0>;
> - };
> -
> - hdmi-con {
> - compatible = "hdmi-connector";
> - type = "a";
> -
> - port {
> - hdmi_con_in: endpoint {
> - remote-endpoint = <&hdmi_out_con>;
> - };
> - };
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> -
> - led-user {
> - label = "user-led";
> - default-state = "on";
> - gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "heartbeat";
> - pinctrl-names = "default";
> - pinctrl-0 = <&user_led_enable_h>;
> - retain-state-suspended;
> - };
> - };
> -
> - sound {
> - compatible = "simple-audio-card";
> - simple-audio-card,format = "i2s";
> - simple-audio-card,name = "Analog RK809";
> - simple-audio-card,mclk-fs = <256>;
> -
> - simple-audio-card,cpu {
> - sound-dai = <&i2s1_8ch>;
> - };
> -
> - simple-audio-card,codec {
> - sound-dai = <&rk809>;
> - };
> - };
> -
> - sdio_pwrseq: sdio-pwrseq {
> - status = "okay";
> - compatible = "mmc-pwrseq-simple";
> - clocks = <&rk809 1>;
> - clock-names = "ext_clock";
> - pinctrl-names = "default";
> - pinctrl-0 = <&wifi_enable_h>;
> - reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
> - post-power-on-delay-ms = <100>;
> - power-off-delay-us = <5000000>;
> - };
> -
> - vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie_enable_h>;
> - regulator-name = "vcc3v3_pcie_p";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc_3v3>;
> - };
> -
> - vcc5v0_in: vcc5v0-in-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_in";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - };
> -
> - vcc5v0_sys: vcc5v0-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_in>;
> - };
> -
> - vcc3v3_sys: vcc3v3-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_sys";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -
> - vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_usb30_host";
> - enable-active-high;
> - gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb30_host_en_h>;
> - regulator-always-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -
> - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_usb_otg";
> - enable-active-high;
> - gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb_otg_en_h>;
> - regulator-always-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -};
> -
> -&combphy1 {
> - status = "okay";
> -};
> -
> -&combphy2 {
> - status = "okay";
> -};
> -
> -&cpu0 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu1 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu2 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu3 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&gmac1 {
> - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
> - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
> - clock_in_out = "input";
> - phy-mode = "rgmii";
> - phy-supply = <&vcc_3v3>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&gmac1m1_miim
> - &gmac1m1_tx_bus2
> - &gmac1m1_rx_bus2
> - &gmac1m1_rgmii_clk
> - &gmac1m1_clkinout
> - &gmac1m1_rgmii_bus>;
> - snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
> - snps,reset-active-low;
> - /* Reset time is 20ms, 100ms for rtl8211f, also works well here */
> - snps,reset-delays-us = <0 20000 100000>;
> - tx_delay = <0x4f>;
> - rx_delay = <0x24>;
> - phy-handle = <&rgmii_phy1>;
> - status = "okay";
> -};
> -
> -&gpu {
> - mali-supply = <&vdd_gpu>;
> - status = "okay";
> -};
> -
> -&hdmi {
> - avdd-0v9-supply = <&vdda0v9_image>;
> - avdd-1v8-supply = <&vcca1v8_image>;
> - status = "okay";
> -};
> -
> -&hdmi_in {
> - hdmi_in_vp0: endpoint {
> - remote-endpoint = <&vp0_out_hdmi>;
> - };
> -};
> -
> -&hdmi_out {
> - hdmi_out_con: endpoint {
> - remote-endpoint = <&hdmi_con_in>;
> - };
> -};
> -
> -&hdmi_sound {
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> -
> - vdd_cpu: regulator at 1c {
> - compatible = "tcs,tcs4525";
> - reg = <0x1c>;
> - fcs,suspend-voltage-selector = <1>;
> - regulator-name = "vdd_cpu";
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1150000>;
> - regulator-ramp-delay = <2300>;
> - regulator-always-on;
> - regulator-boot-on;
> - vin-supply = <&vcc5v0_sys>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - rk809: pmic at 20 {
> - compatible = "rockchip,rk809";
> - reg = <0x20>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> - assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
> - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
> - clock-names = "mclk";
> - clocks = <&cru I2S1_MCLKOUT_TX>;
> - clock-output-names = "rk808-clkout1", "rk808-clkout2";
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
> - rockchip,system-power-controller;
> - #sound-dai-cells = <0>;
> - wakeup-source;
> - #clock-cells = <1>;
> -
> - vcc1-supply = <&vcc3v3_sys>;
> - vcc2-supply = <&vcc3v3_sys>;
> - vcc3-supply = <&vcc3v3_sys>;
> - vcc4-supply = <&vcc3v3_sys>;
> - vcc5-supply = <&vcc3v3_sys>;
> - vcc6-supply = <&vcc3v3_sys>;
> - vcc7-supply = <&vcc3v3_sys>;
> - vcc8-supply = <&vcc3v3_sys>;
> - vcc9-supply = <&vcc3v3_sys>;
> -
> - regulators {
> - vdd_log: DCDC_REG1 {
> - regulator-name = "vdd_log";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vdd_gpu: DCDC_REG2 {
> - regulator-name = "vdd_gpu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vcc_ddr: DCDC_REG3 {
> - regulator-name = "vcc_ddr";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - };
> - };
> -
> - vdd_npu: DCDC_REG4 {
> - regulator-name = "vdd_npu";
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-initial-mode = <0x2>;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_1v8: DCDC_REG5 {
> - regulator-name = "vcc_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vdda0v9_image: LDO_REG1 {
> - regulator-name = "vdda0v9_image";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vdda_0v9: LDO_REG2 {
> - regulator-name = "vdda_0v9";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vdda0v9_pmu: LDO_REG3 {
> - regulator-name = "vdda0v9_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vccio_acodec: LDO_REG4 {
> - regulator-name = "vccio_acodec";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> -
> - };
> - };
> -
> - vccio_sd: LDO_REG5 {
> - regulator-name = "vccio_sd";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcc3v3_pmu: LDO_REG6 {
> - regulator-name = "vcc3v3_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcca_1v8: LDO_REG7 {
> - regulator-name = "vcca_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vcca1v8_pmu: LDO_REG8 {
> - regulator-name = "vcca1v8_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vcca1v8_image: LDO_REG9 {
> - regulator-name = "vcca1v8_image";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vcc_3v3: SWITCH_REG1 {
> - regulator-boot-on;
> - regulator-name = "vcc_3v3";
> - };
> -
> - vcc3v3_sd: SWITCH_REG2 {
> - regulator-name = "vcc3v3_sd";
> - };
> - };
> - };
> -};
> -
> -/* i2c2_m1 exposed on csi port, pulled up to vcc_3v3 */
> -&i2c2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c2m1_xfer>;
> - status = "okay";
> -};
> -
> -/* i2c3_m1 exposed on dsi port, pulled up to vcc_3v3 */
> -&i2c3 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c3m1_xfer>;
> - status = "okay";
> -};
> -
> -/*
> - * i2c4_m0 is exposed on PI40, pulled up to vcc_3v3
> - * pin 27 - i2c4_sda_m0
> - * pin 28 - i2c4_scl_m0
> - */
> -&i2c4 {
> - status = "okay";
> -};
> -
> -/*
> - * i2c5_m0 is exposed on PI40
> - * pin 29 - i2c5_scl_m0
> - * pin 31 - i2c5_sda_m0
> - */
> -&i2c5 {
> - status = "disabled";
> -};
> -
> -&i2s0_8ch {
> - status = "okay";
> -};
> -
> -&i2s1_8ch {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2s1m0_sclktx
> - &i2s1m0_lrcktx
> - &i2s1m0_sdi0
> - &i2s1m0_sdo0>;
> - rockchip,trcm-sync-tx-only;
> - status = "okay";
> -};
> -
> -&mdio1 {
> - rgmii_phy1: ethernet-phy at 1 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <0x1>;
> - };
> -};
> -
> -&pcie2x1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie_reset_h>;
> - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_pcie_p>;
> - status = "okay";
> -};
> -
> -&pinctrl {
> - bt {
> - bt_enable_h: bt-enable-h {
> - rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - bt_host_wake_l: bt-host-wake-l {
> - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
> - };
> -
> - bt_wake_l: bt-wake-l {
> - rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - leds {
> - user_led_enable_h: user-led-enable-h {
> - rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pcie {
> - pcie_enable_h: pcie-enable-h {
> - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - pcie_reset_h: pcie-reset-h {
> - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pmic {
> - pmic_int: pmic_int {
> - rockchip,pins =
> - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - sdio-pwrseq {
> - wifi_enable_h: wifi-enable-h {
> - rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - usb {
> - vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h {
> - rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h {
> - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -&pmu_io_domains {
> - status = "okay";
> - pmuio1-supply = <&vcc3v3_pmu>;
> - pmuio2-supply = <&vcca1v8_pmu>;
> - vccio1-supply = <&vccio_acodec>;
> - vccio2-supply = <&vcc_1v8>;
> - vccio3-supply = <&vccio_sd>;
> - vccio4-supply = <&vcca1v8_pmu>;
> - vccio5-supply = <&vcc_3v3>;
> - vccio6-supply = <&vcc_3v3>;
> - vccio7-supply = <&vcc_3v3>;
> -};
> -
> -&saradc {
> - vref-supply = <&vcca_1v8>;
> - status = "okay";
> -};
> -
> -&sdhci {
> - bus-width = <8>;
> - mmc-hs200-1_8v;
> - non-removable;
> - vmmc-supply = <&vcc_3v3>;
> - vqmmc-supply = <&vcc_1v8>;
> - status = "okay";
> -};
> -
> -&sdmmc0 {
> - bus-width = <4>;
> - cap-sd-highspeed;
> - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> - disable-wp;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> - sd-uhs-sdr50;
> - vmmc-supply = <&vcc3v3_sd>;
> - vqmmc-supply = <&vccio_sd>;
> - status = "okay";
> -};
> -
> -&sdmmc1 {
> - bus-width = <4>;
> - cap-sd-highspeed;
> - cap-sdio-irq;
> - keep-power-in-suspend;
> - mmc-pwrseq = <&sdio_pwrseq>;
> - non-removable;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
> - vmmc-supply = <&vcc3v3_sys>;
> - vqmmc-supply = <&vcca1v8_pmu>;
> - status = "okay";
> -};
> -
> -&sfc {
> - pinctrl-0 = <&fspi_pins>;
> - pinctrl-names = "default";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "okay";
> -
> - flash at 0 {
> - compatible = "jedec,spi-nor";
> - reg = <0>;
> - spi-max-frequency = <24000000>;
> - spi-rx-bus-width = <4>;
> - spi-tx-bus-width = <1>;
> - };
> -};
> -
> -&tsadc {
> - status = "okay";
> -};
> -
> -&uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
> - status = "okay";
> - uart-has-rtscts;
> -
> - bluetooth {
> - compatible = "brcm,bcm4345c5";
> - clocks = <&rk809 1>;
> - clock-names = "lpo";
> - device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
> - host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
> - shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
> - vbat-supply = <&vcc3v3_sys>;
> - vddio-supply = <&vcca1v8_pmu>;
> - };
> -};
> -
> -/*
> - * uart2_m0 is exposed on PI40
> - * pin 8 - uart2_tx_m0
> - * pin 10 - uart2_rx_m0
> - */
> -&uart2 {
> - status = "okay";
> -};
> -
> -&usb2phy0_host {
> - phy-supply = <&vcc5v0_usb30_host>;
> - status = "okay";
> -};
> -
> -&usb2phy0_otg {
> - phy-supply = <&vcc5v0_usb_otg>;
> - status = "okay";
> -};
> -
> -&usb2phy1_otg {
> - phy-supply = <&vcc5v0_usb30_host>;
> - status = "okay";
> -};
> -
> -&usb2phy0 {
> - status = "okay";
> -};
> -
> -&usb2phy1 {
> - status = "okay";
> -};
> -
> -&usb_host0_xhci {
> - status = "okay";
> -};
> -
> -&usb_host1_xhci {
> - status = "okay";
> -};
> -
> -&usb_host0_ehci {
> - status = "okay";
> -};
> -
> -&usb_host0_ohci {
> - status = "okay";
> -};
> -
> -&vop {
> - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> - status = "okay";
> -};
> -
> -&vop_mmu {
> - status = "okay";
> -};
> -
> -&vp0 {
> - vp0_out_hdmi: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
> - reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> - remote-endpoint = <&hdmi_in_vp0>;
> - };
> -};
> diff --git a/arch/arm/dts/rk3566-radxa-cm3-io.dts b/arch/arm/dts/rk3566-radxa-cm3-io.dts
> deleted file mode 100644
> index 3ae24e39450a..000000000000
> --- a/arch/arm/dts/rk3566-radxa-cm3-io.dts
> +++ /dev/null
> @@ -1,281 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Copyright (c) 2022 Radxa Limited
> - * Copyright (c) 2022 Amarula Solutions(India)
> - */
> -
> -/dts-v1/;
> -#include <dt-bindings/soc/rockchip,vop2.h>
> -#include "rk3566.dtsi"
> -#include "rk3566-radxa-cm3.dtsi"
> -
> -/ {
> - model = "Radxa Compute Module 3(CM3) IO Board";
> - compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
> -
> - aliases {
> - ethernet0 = &gmac1;
> - mmc1 = &sdmmc0;
> - };
> -
> - chosen: chosen {
> - stdout-path = "serial2:1500000n8";
> - };
> -
> - gmac1_clkin: external-gmac1-clock {
> - compatible = "fixed-clock";
> - clock-frequency = <125000000>;
> - clock-output-names = "gmac1_clkin";
> - #clock-cells = <0>;
> - };
> -
> - hdmi-con {
> - compatible = "hdmi-connector";
> - type = "a";
> -
> - port {
> - hdmi_con_in: endpoint {
> - remote-endpoint = <&hdmi_out_con>;
> - };
> - };
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> -
> - led-1 {
> - gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
> - color = <LED_COLOR_ID_GREEN>;
> - function = LED_FUNCTION_ACTIVITY;
> - linux,default-trigger = "heartbeat";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pi_nled_activity>;
> - };
> - };
> -
> - vcc5v0_usb30: vcc5v0-usb30-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_usb30";
> - enable-active-high;
> - gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb30_en_h>;
> - regulator-always-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc_sys>;
> - };
> -
> - vcca1v8_image: vcca1v8-image-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcca1v8_image";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - vin-supply = <&vcc_1v8_p>;
> - };
> -
> - vdda0v9_image: vdda0v9-image-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcca0v9_image";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - vin-supply = <&vdda_0v9>;
> - };
> -};
> -
> -&combphy1 {
> - status = "okay";
> -};
> -
> -&gmac1 {
> - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
> - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
> - assigned-clock-rates = <0>, <125000000>;
> - clock_in_out = "input";
> - phy-handle = <&rgmii_phy1>;
> - phy-mode = "rgmii";
> - pinctrl-names = "default";
> - pinctrl-0 = <&gmac1m0_miim
> - &gmac1m0_tx_bus2
> - &gmac1m0_rx_bus2
> - &gmac1m0_rgmii_clk
> - &gmac1m0_rgmii_bus
> - &gmac1m0_clkinout>;
> - snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
> - snps,reset-active-low;
> - /* Reset time is 20ms, 100ms for rtl8211f */
> - snps,reset-delays-us = <0 20000 100000>;
> - tx_delay = <0x46>;
> - rx_delay = <0x2e>;
> - status = "okay";
> -};
> -
> -&hdmi {
> - avdd-0v9-supply = <&vdda0v9_image>;
> - avdd-1v8-supply = <&vcca1v8_image>;
> - status = "okay";
> -};
> -
> -&hdmi_in {
> - hdmi_in_vp0: endpoint {
> - remote-endpoint = <&vp0_out_hdmi>;
> - };
> -};
> -
> -&hdmi_out {
> - hdmi_out_con: endpoint {
> - remote-endpoint = <&hdmi_con_in>;
> - };
> -};
> -
> -&hdmi_sound {
> - status = "okay";
> -};
> -
> -&mdio1 {
> - rgmii_phy1: ethernet-phy at 0 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <0x0>;
> - };
> -};
> -
> -&pinctrl {
> - gmac1 {
> - gmac1m0_miim: gmac1m0-miim {
> - rockchip,pins =
> - /* gmac1_mdcm0 */
> - <3 RK_PC4 3 &pcfg_pull_none_drv_level_15>,
> - /* gmac1_mdiom0 */
> - <3 RK_PC5 3 &pcfg_pull_none_drv_level_15>;
> - };
> -
> - gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
> - rockchip,pins =
> - /* gmac1_rxd0m0 */
> - <3 RK_PB1 3 &pcfg_pull_none_drv_level_15>,
> - /* gmac1_rxd1m0 */
> - <3 RK_PB2 3 &pcfg_pull_none_drv_level_15>,
> - /* gmac1_rxdvcrsm0 */
> - <3 RK_PB3 3 &pcfg_pull_none_drv_level_15>;
> - };
> -
> - gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
> - rockchip,pins =
> - /* gmac1_txd0m0 */
> - <3 RK_PB5 3 &pcfg_pull_none_drv_level_15>,
> - /* gmac1_txd1m0 */
> - <3 RK_PB6 3 &pcfg_pull_none_drv_level_15>,
> - /* gmac1_txenm0 */
> - <3 RK_PB7 3 &pcfg_pull_none_drv_level_15>;
> - };
> -
> - gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
> - rockchip,pins =
> - /* gmac1_rxclkm0 */
> - <3 RK_PA7 3 &pcfg_pull_none_drv_level_15>,
> - /* gmac1_txclkm0 */
> - <3 RK_PA6 3 &pcfg_pull_none_drv_level_15>;
> - };
> -
> - gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
> - rockchip,pins =
> - /* gmac1_rxd2m0 */
> - <3 RK_PA4 3 &pcfg_pull_none_drv_level_15>,
> - /* gmac1_rxd3m0 */
> - <3 RK_PA5 3 &pcfg_pull_none_drv_level_15>,
> - /* gmac1_txd2m0 */
> - <3 RK_PA2 3 &pcfg_pull_none_drv_level_15>,
> - /* gmac1_txd3m0 */
> - <3 RK_PA3 3 &pcfg_pull_none_drv_level_15>;
> - };
> -
> - gmac1m0_clkinout: gmac1m0-clkinout {
> - rockchip,pins =
> - /* gmac1_mclkinoutm0 */
> - <3 RK_PC0 3 &pcfg_pull_none_drv_level_15>;
> - };
> - };
> -
> - leds {
> - pi_nled_activity: pi-nled-activity {
> - rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - sdcard {
> - sdmmc_pwren: sdmmc-pwren {
> - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - usb {
> - vcc5v0_usb30_en_h: vcc5v0-host-en-h {
> - rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -&sdmmc0 {
> - bus-width = <4>;
> - cap-mmc-highspeed;
> - cap-sd-highspeed;
> - disable-wp;
> - vqmmc-supply = <&vccio_sd>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>;
> - status = "okay";
> -};
> -
> -&uart2 {
> - status = "okay";
> -};
> -
> -&usb2phy0_host {
> - phy-supply = <&vcc5v0_usb30>;
> - status = "okay";
> -};
> -
> -&usb2phy1_host {
> - status = "okay";
> -};
> -
> -&usb2phy1_otg {
> - status = "okay";
> -};
> -
> -&usb_host0_ehci {
> - status = "okay";
> -};
> -
> -&usb_host1_xhci {
> - status = "okay";
> -};
> -
> -&usb2phy0_otg {
> - status = "okay";
> -};
> -
> -&usb_host0_xhci {
> - status = "okay";
> -};
> -
> -&vop {
> - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> - status = "okay";
> -};
> -
> -&vop_mmu {
> - status = "okay";
> -};
> -
> -&vp0 {
> - vp0_out_hdmi: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
> - reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> - remote-endpoint = <&hdmi_in_vp0>;
> - };
> -};
> diff --git a/arch/arm/dts/rk3566-radxa-cm3.dtsi b/arch/arm/dts/rk3566-radxa-cm3.dtsi
> deleted file mode 100644
> index 45de2630bb50..000000000000
> --- a/arch/arm/dts/rk3566-radxa-cm3.dtsi
> +++ /dev/null
> @@ -1,425 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Copyright (c) 2022 Radxa Limited
> - * Copyright (c) 2022 Amarula Solutions(India)
> - */
> -
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/leds/common.h>
> -
> -/ {
> - compatible = "radxa,cm3", "rockchip,rk3566";
> -
> - aliases {
> - mmc0 = &sdhci;
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> -
> - led-0 {
> - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
> - color = <LED_COLOR_ID_GREEN>;
> - function = LED_FUNCTION_STATUS;
> - linux,default-trigger = "timer";
> - default-state = "on";
> - pinctrl-names = "default";
> - pinctrl-0 = <&user_led2>;
> - };
> - };
> -
> - vcc_sys: vcc-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - };
> -
> - vcc_1v8: vcc-1v8-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - vin-supply = <&vcc_1v8_p>;
> - };
> -
> - vcc_3v3: vcc-3v3-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc_3v3";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc3v3_sys>;
> - };
> -
> - vcca_1v8: vcca-1v8-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcca_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - vin-supply = <&vcc_1v8_p>;
> - };
> -
> - sdio_pwrseq: pwrseq-sdio {
> - compatible = "mmc-pwrseq-simple";
> - clocks = <&rk817 1>;
> - clock-names = "ext_clock";
> - pinctrl-names = "default";
> - pinctrl-0 = <&wifi_reg_on_h>;
> - reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
> - };
> -};
> -
> -&cpu0 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu1 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu2 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu3 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&gpu {
> - mali-supply = <&vdd_gpu_npu>;
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> -
> - vdd_cpu: regulator at 1c {
> - compatible = "tcs,tcs4525";
> - reg = <0x1c>;
> - fcs,suspend-voltage-selector = <1>;
> - regulator-name = "vdd_cpu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <712500>;
> - regulator-max-microvolt = <1390000>;
> - regulator-ramp-delay = <2300>;
> - vin-supply = <&vcc_sys>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - rk817: pmic at 20 {
> - compatible = "rockchip,rk817";
> - reg = <0x20>;
> - #clock-cells = <1>;
> - clock-output-names = "rk817-clkout1", "rk817-clkout2";
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pmic_int_l>;
> - rockchip,system-power-controller;
> - wakeup-source;
> -
> - vcc1-supply = <&vcc_sys>;
> - vcc2-supply = <&vcc_sys>;
> - vcc3-supply = <&vcc_sys>;
> - vcc4-supply = <&vcc_sys>;
> - vcc5-supply = <&vcc_sys>;
> - vcc6-supply = <&vcc_sys>;
> - vcc7-supply = <&vcc_sys>;
> -
> - regulators {
> - vdd_logic: DCDC_REG1 {
> - regulator-name = "vdd_logic";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vdd_gpu_npu: DCDC_REG2 {
> - regulator-name = "vdd_gpu_npu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_ddr: DCDC_REG3 {
> - regulator-name = "vcc_ddr";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - };
> - };
> -
> - vcc3v3_sys: DCDC_REG4 {
> - regulator-name = "vcc3v3_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcca1v8_pmu: LDO_REG1 {
> - regulator-name = "vcca1v8_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vdda_0v9: LDO_REG2 {
> - regulator-name = "vdda_0v9";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_pmu: LDO_REG3 {
> - regulator-name = "vdda0v9_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vccio_acodec: LDO_REG4 {
> - regulator-name = "vccio_acodec";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vccio_sd: LDO_REG5 {
> - regulator-name = "vccio_sd";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_pmu: LDO_REG6 {
> - regulator-name = "vcc3v3_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcc_1v8_p: LDO_REG7 {
> - regulator-name = "vcc_1v8_p";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc1v8_dvp: LDO_REG8 {
> - regulator-name = "vcc1v8_dvp";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc2v8_dvp: LDO_REG9 {
> - regulator-name = "vcc2v8_dvp";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <2800000>;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - };
> - };
> -};
> -
> -&pinctrl {
> - bluetooth {
> - bt_host_wake_h: bt-host-wake-h {
> - rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - bt_reg_on_h: bt-reg-on-h {
> - rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - bt_wake_host_h: bt-wake-host-h {
> - rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pmic {
> - pmic_int_l: pmic-int-l {
> - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - leds {
> - user_led2: user-led2 {
> - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - wifi {
> - wifi_reg_on_h: wifi-reg-on-h {
> - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - wifi_host_wake_h: wifi-host-wake-h {
> - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -&pmu_io_domains {
> - pmuio1-supply = <&vcc3v3_pmu>;
> - pmuio2-supply = <&vcc_3v3>;
> - vccio1-supply = <&vccio_acodec>;
> - vccio2-supply = <&vcc_1v8>;
> - vccio3-supply = <&vccio_sd>;
> - vccio4-supply = <&vcc_1v8>;
> - vccio5-supply = <&vcc_3v3>;
> - vccio6-supply = <&vcc_3v3>;
> - vccio7-supply = <&vcc_3v3>;
> - status = "okay";
> -};
> -
> -&saradc {
> - vref-supply = <&vcca_1v8>;
> - status = "okay";
> -};
> -
> -&sdmmc1 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - bus-width = <4>;
> - disable-wp;
> - cap-sd-highspeed;
> - cap-sdio-irq;
> - keep-power-in-suspend;
> - mmc-pwrseq = <&sdio_pwrseq>;
> - non-removable;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
> - sd-uhs-sdr104;
> - vmmc-supply = <&vcc_3v3>;
> - vqmmc-supply = <&vcc_1v8>;
> - status = "okay";
> -
> - wifi at 1 {
> - compatible = "brcm,bcm43455-fmac";
> - reg = <1>;
> - interrupt-parent = <&gpio2>;
> - interrupts = <RK_PC1 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "host-wake";
> - pinctrl-names = "default";
> - pinctrl-0 = <&wifi_host_wake_h>;
> - };
> -};
> -
> -&sdhci {
> - bus-width = <8>;
> - max-frequency = <200000000>;
> - mmc-hs200-1_8v;
> - non-removable;
> - pinctrl-names = "default";
> - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
> - vmmc-supply = <&vcc_3v3>;
> - vqmmc-supply = <&vcc_1v8>;
> - status = "okay";
> -};
> -
> -&uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
> - status = "okay";
> -
> - bluetooth {
> - compatible = "brcm,bcm4345c5";
> - clocks = <&rk817 1>;
> - clock-names = "lpo";
> - device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
> - host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
> - reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>;
> - vbat-supply = <&vcc_3v3>;
> - vddio-supply = <&vcc_1v8>;
> - };
> -};
> -
> -&usb2phy0 {
> - status = "okay";
> -};
> -
> -&usb2phy1 {
> - status = "okay";
> -};
> -
> -&tsadc {
> - rockchip,hw-tshut-mode = <1>;
> - rockchip,hw-tshut-polarity = <0>;
> - status = "okay";
> -};
> diff --git a/arch/arm/dts/rk3566-soquartz-blade.dts b/arch/arm/dts/rk3566-soquartz-blade.dts
> deleted file mode 100644
> index fdbf1c783242..000000000000
> --- a/arch/arm/dts/rk3566-soquartz-blade.dts
> +++ /dev/null
> @@ -1,198 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -
> -/dts-v1/;
> -
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/input/input.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -
> -#include "rk3566-soquartz.dtsi"
> -
> -/ {
> - model = "PINE64 RK3566 SOQuartz on Blade carrier board";
> - compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
> -
> - aliases {
> - ethernet0 = &gmac1;
> - };
> -
> - /* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */
> - vcc3v0_sd: vcc3v0-sd-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v0_sd";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc3v3_sys>;
> - };
> -
> - /* labeled VCC_SSD in schematic */
> - vcc3v3_pcie_p: vcc3v3-pcie-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_pcie_p";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vbus>;
> - };
> -
> - vcc5v_dcin: vcc5v-dcin-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v_dcin";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - };
> -};
> -
> -&combphy2 {
> - phy-supply = <&vcc3v3_sys>;
> - status = "okay";
> -};
> -
> -&gmac1 {
> - status = "okay";
> -};
> -
> -/*
> - * i2c1 is exposed on CM1 / Module1A
> - * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
> - * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
> - */
> -&i2c1 {
> - status = "okay";
> -
> -};
> -
> -/*
> - * i2c2 is exposed on CM1 / Module1A - to PI40
> - * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
> - * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
> - */
> -&i2c2 {
> - status = "disabled";
> -};
> -
> -/*
> - * i2c3 is exposed on CM1 / Module1A - to PI40
> - * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
> - * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
> - */
> -&i2c3 {
> - status = "disabled";
> -};
> -
> -/*
> - * i2c4 is exposed on CM2 / Module1B - to PI40
> - * pin 45 - GPIO24 - i2c4_scl_m1
> - * pin 47 - GPIO23 - i2c4_sda_m1
> - */
> -&i2c4 {
> - status = "disabled";
> -};
> -
> -/*
> - * i2s1_8ch is exposed on CM1 / Module1A - to PI40
> - * pin 24 - GPIO26 - i2s1_sdi1_m1
> - * pin 25 - GPIO21 - i2s1_sdo0_m1
> - * pin 26 - GPIO19 - i2s1_lrck_tx_m1
> - * pin 27 - GPIO20 - i2s1_sdi0_m1
> - * pin 29 - GPIO16 - i2s1_sdi3_m1
> - * pin 30 - GPIO6 - i2s1_sdi2_m1
> - * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3
> - * pin 41 - GPIO25 - i2s1_sdo2_m1
> - * pin 49 - GPIO18 - i2s1_sclk_tx_m1
> - * pin 50 - GPIO17 - i2s1_mclk_m1
> - * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2
> - */
> -&i2s1_8ch {
> - status = "disabled";
> -};
> -
> -&led_diy {
> - color = <LED_COLOR_ID_RED>;
> - function = LED_FUNCTION_DISK_ACTIVITY;
> - linux,default-trigger = "disk-activity";
> - status = "okay";
> -};
> -
> -&led_work {
> - color = <LED_COLOR_ID_GREEN>;
> - function = LED_FUNCTION_STATUS;
> - linux,default-trigger = "heartbeat";
> - status = "okay";
> -};
> -
> -&pcie2x1 {
> - vpcie3v3-supply = <&vcc3v3_pcie_p>;
> - status = "okay";
> -};
> -
> -&rgmii_phy1 {
> - status = "okay";
> -};
> -
> -/*
> - * saradc is exposed on CM1 / Module1A - to J2
> - * pin 94 - AIN1 - saradc_vin3
> - * pin 96 - AIN0 - saradc_vin2
> - */
> -&saradc {
> - status = "disabled";
> -};
> -
> -&sdmmc0 {
> - vmmc-supply = <&vcc3v0_sd>;
> - status = "okay";
> -};
> -
> -/*
> - * spi3 is exposed on CM1 / Module1A - to PI40
> - * pin 37 - GPIO7 - spi3_cs1_m0
> - * pin 38 - GPIO11 - spi3_clk_m0
> - * pin 39 - GPIO8 - spi3_cs0_m0
> - * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch
> - * pin 44 - GPIO10 - spi3_mosi_m0
> - */
> -&spi3 {
> - status = "disabled";
> -};
> -
> -/*
> - * uart2 is exposed on CM1 / Module1A - to PI40
> - * pin 51 - GPIO15 - uart2_rx_m0
> - * pin 55 - GPIO14 - uart2_tx_m0
> - */
> -&uart2 {
> - status = "okay";
> -};
> -
> -/*
> - * uart7 is exposed on CM1 / Module1A - to PI40
> - * pin 46 - GPIO22 - uart7_tx_m2
> - * pin 47 - GPIO23 - uart7_rx_m2
> - */
> -&uart7 {
> - status = "okay";
> -};
> -
> -&usb2phy0 {
> - status = "okay";
> -};
> -
> -&usb2phy0_otg {
> - phy-supply = <&vbus>;
> - status = "okay";
> -};
> -
> -&usb_host0_xhci {
> - status = "okay";
> -};
> -
> -&vbus {
> - vin-supply = <&vcc5v_dcin>;
> -};
> diff --git a/arch/arm/dts/rk3566-soquartz-cm4.dts b/arch/arm/dts/rk3566-soquartz-cm4.dts
> deleted file mode 100644
> index 6ed3fa4aee34..000000000000
> --- a/arch/arm/dts/rk3566-soquartz-cm4.dts
> +++ /dev/null
> @@ -1,196 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -
> -/dts-v1/;
> -
> -#include "rk3566-soquartz.dtsi"
> -
> -/ {
> - model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
> - compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
> -
> - aliases {
> - ethernet0 = &gmac1;
> - };
> -
> - /* labeled +12v in schematic */
> - vcc12v_dcin: vcc12v-dcin-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc12v_dcin";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - };
> -
> - /* labeled +5v in schematic */
> - vcc_5v: vcc-5v-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc_5v";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc12v_dcin>;
> - };
> -
> - vcc_sd_pwr: vcc-sd-pwr-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc_sd_pwr";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc3v3_sys>;
> - };
> -};
> -
> -/* phy for pcie */
> -&combphy2 {
> - phy-supply = <&vcc3v3_sys>;
> - status = "okay";
> -};
> -
> -&gmac1 {
> - status = "okay";
> -};
> -
> -/*
> - * i2c1 is exposed on CM1 / Module1A
> - * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
> - * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
> - */
> -&i2c1 {
> - status = "okay";
> -
> - /*
> - * the rtc interrupt is tied to PMIC_PWRON,
> - * it will force reset the board if triggered.
> - */
> - pcf85063: rtc at 51 {
> - compatible = "nxp,pcf85063";
> - reg = <0x51>;
> - };
> -};
> -
> -/*
> - * i2c2 is exposed on CM1 / Module1A - to PI40
> - * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
> - * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
> - */
> -&i2c2 {
> - status = "disabled";
> -};
> -
> -/*
> - * i2c3 is exposed on CM1 / Module1A - to PI40
> - * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
> - * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
> - */
> -&i2c3 {
> - status = "disabled";
> -};
> -
> -/*
> - * i2c4 is exposed on CM2 / Module1B - to PI40
> - * pin 45 - GPIO24 - i2c4_scl_m1
> - * pin 47 - GPIO23 - i2c4_sda_m1
> - */
> -&i2c4 {
> - status = "disabled";
> -};
> -
> -/*
> - * i2s1_8ch is exposed on CM1 / Module1A - to PI40
> - * pin 24 - GPIO26 - i2s1_sdi1_m1
> - * pin 25 - GPIO21 - i2s1_sdo0_m1
> - * pin 26 - GPIO19 - i2s1_lrck_tx_m1
> - * pin 27 - GPIO20 - i2s1_sdi0_m1
> - * pin 29 - GPIO16 - i2s1_sdi3_m1
> - * pin 30 - GPIO6 - i2s1_sdi2_m1
> - * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3
> - * pin 41 - GPIO25 - i2s1_sdo2_m1
> - * pin 49 - GPIO18 - i2s1_sclk_tx_m1
> - * pin 50 - GPIO17 - i2s1_mclk_m1
> - * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2
> - */
> -&i2s1_8ch {
> - status = "disabled";
> -};
> -
> -&led_diy {
> - status = "okay";
> -};
> -
> -&led_work {
> - status = "okay";
> -};
> -
> -&pcie2x1 {
> - vpcie3v3-supply = <&vcc_3v3>;
> - status = "okay";
> -};
> -
> -&rgmii_phy1 {
> - status = "okay";
> -};
> -
> -/*
> - * saradc is exposed on CM1 / Module1A - to J2
> - * pin 94 - AIN1 - saradc_vin3
> - * pin 96 - AIN0 - saradc_vin2
> - */
> -&saradc {
> - status = "disabled";
> -};
> -
> -&sdmmc0 {
> - vmmc-supply = <&vcc_sd_pwr>;
> - status = "okay";
> -};
> -
> -/*
> - * spi3 is exposed on CM1 / Module1A - to PI40
> - * pin 37 - GPIO7 - spi3_cs1_m0
> - * pin 38 - GPIO11 - spi3_clk_m0
> - * pin 39 - GPIO8 - spi3_cs0_m0
> - * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch
> - * pin 44 - GPIO10 - spi3_mosi_m0
> - */
> -&spi3 {
> - status = "disabled";
> -};
> -
> -/*
> - * uart2 is exposed on CM1 / Module1A - to PI40
> - * pin 51 - GPIO15 - uart2_rx_m0
> - * pin 55 - GPIO14 - uart2_tx_m0
> - */
> -&uart2 {
> - status = "okay";
> -};
> -
> -/*
> - * uart7 is exposed on CM1 / Module1A - to PI40
> - * pin 46 - GPIO22 - uart7_tx_m2
> - * pin 47 - GPIO23 - uart7_rx_m2
> - */
> -&uart7 {
> - status = "okay";
> -};
> -
> -&usb2phy0 {
> - status = "okay";
> -};
> -
> -&usb2phy0_otg {
> - phy-supply = <&vcc_5v>;
> - status = "okay";
> -};
> -
> -&usb_host0_xhci {
> - status = "okay";
> -};
> -
> -&vbus {
> - vin-supply = <&vcc_5v>;
> -};
> diff --git a/arch/arm/dts/rk3566-soquartz-model-a.dts b/arch/arm/dts/rk3566-soquartz-model-a.dts
> deleted file mode 100644
> index f2095dfa4eaf..000000000000
> --- a/arch/arm/dts/rk3566-soquartz-model-a.dts
> +++ /dev/null
> @@ -1,236 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -
> -/dts-v1/;
> -
> -#include "rk3566-soquartz.dtsi"
> -
> -/ {
> - model = "PINE64 RK3566 SOQuartz on Model A carrier board";
> - compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
> -
> - aliases {
> - ethernet0 = &gmac1;
> - };
> -
> - /* labeled DCIN_12V in schematic */
> - vcc12v_dcin: vcc12v-dcin-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc12v_dcin";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - };
> -
> - vcc5v0_usb: vcc5v0-usb-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_usb";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc12v_dcin>;
> - };
> -
> - /*
> - * Labelled VCC3V0_SD in schematic to not conflict with PMIC
> - * regulator, it's 3.3v in actuality
> - */
> - vcc3v0_sd: vcc3v0-sd-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v0_sd";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc3v3_sys>;
> - };
> -
> - vcc3v3_pcie: vcc3v3-pcie-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_pcie";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc12v_dcin>;
> - };
> -
> - vcc12v_pcie: vcc12v-pcie-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc12v_pcie";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - vin-supply = <&vcc12v_dcin>;
> - };
> -};
> -
> -/* phy for pcie */
> -&combphy2 {
> - phy-supply = <&vcc3v3_sys>;
> - status = "okay";
> -};
> -
> -&gmac1 {
> - status = "okay";
> -};
> -
> -/*
> - * i2c1 is exposed on CM1 / Module1A
> - * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
> - * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
> - */
> -&i2c1 {
> - status = "okay";
> -
> - /*
> - * the rtc interrupt is tied to PMIC_PWRON,
> - * it will force reset the board if triggered.
> - */
> - pcf85063: rtc at 51 {
> - compatible = "nxp,pcf85063";
> - reg = <0x51>;
> - };
> -};
> -
> -/*
> - * i2c2 is exposed on CM1 / Module1A - to PI40
> - * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
> - * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
> - */
> -&i2c2 {
> - status = "disabled";
> -};
> -
> -/*
> - * i2c3 is exposed on CM1 / Module1A - to PI40
> - * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
> - * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
> - */
> -&i2c3 {
> - status = "disabled";
> -};
> -
> -/*
> - * i2c4 is exposed on CM2 / Module1B - to PI40
> - * pin 45 - GPIO24 - i2c4_scl_m1
> - * pin 47 - GPIO23 - i2c4_sda_m1
> - */
> -&i2c4 {
> - status = "disabled";
> -};
> -
> -/*
> - * i2s1_8ch is exposed on CM1 / Module1A - to PI40
> - * pin 24 - GPIO26 - i2s1_sdi1_m1
> - * pin 25 - GPIO21 - i2s1_sdo0_m1
> - * pin 26 - GPIO19 - i2s1_lrck_tx_m1
> - * pin 27 - GPIO20 - i2s1_sdi0_m1
> - * pin 29 - GPIO16 - i2s1_sdi3_m1
> - * pin 30 - GPIO6 - i2s1_sdi2_m1
> - * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3
> - * pin 41 - GPIO25 - i2s1_sdo2_m1
> - * pin 49 - GPIO18 - i2s1_sclk_tx_m1
> - * pin 50 - GPIO17 - i2s1_mclk_m1
> - * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2
> - */
> -&i2s1_8ch {
> - status = "disabled";
> -};
> -
> -&led_diy {
> - status = "okay";
> -};
> -
> -&led_work {
> - status = "okay";
> -};
> -
> -&pcie2x1 {
> - vpcie3v3-supply = <&vcc3v3_pcie>;
> - status = "okay";
> -};
> -
> -&rgmii_phy1 {
> - status = "okay";
> -};
> -
> -&rgmii_phy1 {
> - status = "okay";
> -};
> -
> -/*
> - * saradc is exposed on CM1 / Module1A - to J2
> - * pin 94 - AIN1 - saradc_vin3
> - * pin 96 - AIN0 - saradc_vin2
> - */
> -&saradc {
> - status = "disabled";
> -};
> -
> -/*
> - * vmmc-supply is vcc3v3_sd on v1.0 and vcc3v0_sd on v1.1+
> - * the soquartz SoM has SDMMC_PWR (CM1 pin 75) hardwired to vcc3v3_sys,
> - * so we use vcc3v3_sd here to ensure the regulator is enabled on older boards.
> - */
> -&sdmmc0 {
> - vmmc-supply = <&vcc3v3_sd>;
> - status = "okay";
> -};
> -
> -/*
> - * spi3 is exposed on CM1 / Module1A - to PI40
> - * pin 37 - GPIO7 - spi3_cs1_m0
> - * pin 38 - GPIO11 - spi3_clk_m0
> - * pin 39 - GPIO8 - spi3_cs0_m0
> - * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch
> - * pin 44 - GPIO10 - spi3_mosi_m0
> - */
> -&spi3 {
> - status = "disabled";
> -};
> -
> -/*
> - * uart2 is exposed on CM1 / Module1A - to PI40
> - * pin 51 - GPIO15 - uart2_rx_m0
> - * pin 55 - GPIO14 - uart2_tx_m0
> - */
> -&uart2 {
> - status = "okay";
> -};
> -
> -/*
> - * uart7 is exposed on CM1 / Module1A - to PI40
> - * pin 46 - GPIO22 - uart7_tx_m2
> - * pin 47 - GPIO23 - uart7_rx_m2
> - */
> -&uart7 {
> - status = "okay";
> -};
> -
> -&usb2phy0 {
> - status = "okay";
> -};
> -
> -&usb2phy0_otg {
> - phy-supply = <&vcc5v0_usb>;
> - status = "okay";
> -};
> -
> -&usb_host0_xhci {
> - status = "okay";
> -};
> -
> -&vbus {
> - vin-supply = <&vcc5v0_usb>;
> -};
> -
> -&vcc3v3_sd {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - status = "okay";
> -};
> diff --git a/arch/arm/dts/rk3566-soquartz.dtsi b/arch/arm/dts/rk3566-soquartz.dtsi
> deleted file mode 100644
> index bfb7b952f4c5..000000000000
> --- a/arch/arm/dts/rk3566-soquartz.dtsi
> +++ /dev/null
> @@ -1,684 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -
> -/dts-v1/;
> -
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include <dt-bindings/soc/rockchip,vop2.h>
> -#include "rk3566.dtsi"
> -
> -/ {
> - model = "Pine64 RK3566 SoQuartz SOM";
> - compatible = "pine64,soquartz", "rockchip,rk3566";
> -
> - aliases {
> - mmc0 = &sdmmc0;
> - mmc1 = &sdhci;
> - mmc2 = &sdmmc1;
> - };
> -
> - chosen: chosen {
> - stdout-path = "serial2:1500000n8";
> - };
> -
> - gmac1_clkin: external-gmac1-clock {
> - compatible = "fixed-clock";
> - clock-frequency = <125000000>;
> - clock-output-names = "gmac1_clkin";
> - #clock-cells = <0>;
> - };
> -
> - hdmi-con {
> - compatible = "hdmi-connector";
> - type = "a";
> -
> - port {
> - hdmi_con_in: endpoint {
> - remote-endpoint = <&hdmi_out_con>;
> - };
> - };
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> -
> - led_diy: led-diy {
> - label = "diy-led";
> - default-state = "on";
> - gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>;
> - linux,default-trigger = "heartbeat";
> - pinctrl-names = "default";
> - pinctrl-0 = <&diy_led_enable_h>;
> - retain-state-suspended;
> - status = "disabled";
> - };
> -
> - led_work: led-work {
> - label = "work-led";
> - default-state = "off";
> - gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&work_led_enable_h>;
> - retain-state-suspended;
> - status = "disabled";
> - };
> - };
> -
> - sdio_pwrseq: sdio-pwrseq {
> - status = "okay";
> - compatible = "mmc-pwrseq-simple";
> - clocks = <&rk809 1>;
> - clock-names = "ext_clock";
> - pinctrl-names = "default";
> - pinctrl-0 = <&wifi_enable_h>;
> - reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
> - };
> -
> - vbus: vbus-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vbus";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - };
> -
> - /* sourced from vbus, vbus is provided by the carrier board */
> - vcc5v0_sys: vcc5v0-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vbus>;
> - };
> -
> - vcc3v3_sys: vcc3v3-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -};
> -
> -&cpu0 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu1 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu2 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu3 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&gmac1 {
> - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
> - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
> - clock_in_out = "input";
> - phy-supply = <&vcc_3v3>;
> - phy-mode = "rgmii";
> - pinctrl-names = "default";
> - pinctrl-0 = <&gmac1m0_miim
> - &gmac1m0_tx_bus2
> - &gmac1m0_rx_bus2
> - &gmac1m0_rgmii_clk
> - &gmac1m0_clkinout
> - &gmac1m0_rgmii_bus>;
> - snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
> - snps,reset-active-low;
> - /* Reset time is 20ms, 100ms for rtl8211f, also works well here */
> - snps,reset-delays-us = <0 20000 100000>;
> - tx_delay = <0x30>;
> - rx_delay = <0x10>;
> - phy-handle = <&rgmii_phy1>;
> - status = "disabled";
> -};
> -
> -&gpio0 {
> - nextrst-hog {
> - gpio-hog;
> - /*
> - * GPIO_ACTIVE_LOW + output-low here means that the pin is set
> - * to high, because output-low decides the value pre-inversion.
> - */
> - gpios = <RK_PA5 GPIO_ACTIVE_LOW>;
> - line-name = "nEXTRST";
> - output-low;
> - };
> -};
> -
> -&gpu {
> - mali-supply = <&vdd_gpu>;
> - status = "okay";
> -};
> -
> -&hdmi {
> - avdd-0v9-supply = <&vdda0v9_image>;
> - avdd-1v8-supply = <&vcca1v8_image>;
> - status = "okay";
> -};
> -
> -&hdmi_in {
> - hdmi_in_vp0: endpoint {
> - remote-endpoint = <&vp0_out_hdmi>;
> - };
> -};
> -
> -&hdmi_out {
> - hdmi_out_con: endpoint {
> - remote-endpoint = <&hdmi_con_in>;
> - };
> -};
> -
> -&hdmi_sound {
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> -
> - vdd_cpu: regulator at 1c {
> - compatible = "tcs,tcs4525";
> - reg = <0x1c>;
> - fcs,suspend-voltage-selector = <1>;
> - regulator-name = "vdd_cpu";
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1150000>;
> - regulator-ramp-delay = <2300>;
> - regulator-always-on;
> - regulator-boot-on;
> - vin-supply = <&vcc5v0_sys>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - rk809: pmic at 20 {
> - compatible = "rockchip,rk809";
> - reg = <0x20>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> - #clock-cells = <1>;
> - clock-output-names = "rk808-clkout1", "rk808-clkout2";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pmic_int_l>;
> - rockchip,system-power-controller;
> - wakeup-source;
> -
> - vcc1-supply = <&vcc3v3_sys>;
> - vcc2-supply = <&vcc3v3_sys>;
> - vcc3-supply = <&vcc3v3_sys>;
> - vcc4-supply = <&vcc3v3_sys>;
> - vcc5-supply = <&vcc3v3_sys>;
> - vcc6-supply = <&vcc3v3_sys>;
> - vcc7-supply = <&vcc3v3_sys>;
> - vcc8-supply = <&vcc3v3_sys>;
> - vcc9-supply = <&vcc3v3_sys>;
> -
> - regulators {
> - vdd_logic: DCDC_REG1 {
> - regulator-name = "vdd_logic";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> - regulator-initial-mode = <0x2>;
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vdd_gpu: DCDC_REG2 {
> - regulator-name = "vdd_gpu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> - regulator-initial-mode = <0x2>;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_ddr: DCDC_REG3 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> - regulator-name = "vcc_ddr";
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - };
> - };
> -
> - vdd_npu: DCDC_REG4 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-initial-mode = <0x2>;
> - regulator-name = "vdd_npu";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_1v8: DCDC_REG5 {
> - regulator-name = "vcc_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vdda0v9_image: LDO_REG1 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - regulator-name = "vdda0v9_image";
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vdda_0v9: LDO_REG2 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - regulator-name = "vdda_0v9";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_pmu: LDO_REG3 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - regulator-name = "vdda0v9_pmu";
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vccio_acodec: LDO_REG4 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "vccio_acodec";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vccio_sd: LDO_REG5 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "vccio_sd";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_pmu: LDO_REG6 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "vcc3v3_pmu";
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcca_1v8: LDO_REG7 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-name = "vcca_1v8";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcca1v8_pmu: LDO_REG8 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-name = "vcca1v8_pmu";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcca1v8_image: LDO_REG9 {
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-name = "vcca1v8_image";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_3v3: SWITCH_REG1 {
> - regulator-name = "vcc_3v3";
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_sd: SWITCH_REG2 {
> - regulator-name = "vcc3v3_sd";
> - status = "disabled";
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - };
> - };
> -
> - };
> - };
> -};
> -
> -/*
> - * i2c1 is exposed on CM1 / Module1A
> - * pin 80 - i2c1_scl_m0, pullup to vcc3v3_pmu
> - * pin 82 - i2c1_sda_m0, pullup to vcc3v3_pmu
> - */
> -&i2c1 {
> - status = "disabled";
> -};
> -
> -/*
> - * i2c2 is exposed on CM1 / Module1A
> - * pin 56 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
> - * pin 58 - i2c2_sda_m1, pullup to vcc_3v3
> - */
> -&i2c2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c2m1_xfer>;
> - status = "disabled";
> -};
> -
> -/*
> - * i2c3 is exposed on CM1 / Module1A
> - * pin 35 - i2c3_scl_m0, pullup to vcc_3v3
> - * pin 36 - i2c3_sda_m0, pullup to vcc_3v3
> - */
> -&i2c3 {
> - status = "disabled";
> -};
> -
> -/*
> - * i2c4 is exposed on CM2 / Module1B
> - * pin 45 - i2c4_scl_m1
> - * pin 47 - i2c4_sda_m1
> - */
> -&i2c4 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c4m1_xfer>;
> - status = "disabled";
> -};
> -
> -&i2s0_8ch {
> - status = "okay";
> -};
> -
> -/*
> - * i2s1_8ch is exposed on CM1 / Module1A
> - * pin 24 - i2s1_sdi1_m1
> - * pin 25 - i2s1_sdo0_m1
> - * pin 26 - i2s1_lrck_tx_m1
> - * pin 27 - i2s1_sdi0_m1
> - * pin 29 - i2s1_sdi3_m1
> - * pin 30 - i2s1_sdi2_m1
> - * pin 40 - i2s1_sdo1_m1, shared with spi3
> - * pin 41 - i2s1_sdo2_m1
> - * pin 49 - i2s1_sclk_tx_m1
> - * pin 50 - i2s1_mclk_m1
> - * pin 56 - i2s1_sdo3_m1, shared with i2c2
> - */
> -&i2s1_8ch {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2s1m1_sclktx &i2s1m1_sclkrx
> - &i2s1m1_lrcktx &i2s1m1_lrckrx
> - &i2s1m1_sdi0 &i2s1m1_sdi1
> - &i2s1m1_sdi2 &i2s1m1_sdi3
> - &i2s1m1_sdo0 &i2s1m1_sdo1
> - &i2s1m1_sdo2 &i2s1m1_sdo3>;
> - status = "disabled";
> -};
> -
> -&mdio1 {
> - rgmii_phy1: ethernet-phy at 0 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <0>;
> - status = "disabled";
> - };
> -};
> -
> -&pcie2x1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie_reset_h>;
> - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
> -};
> -
> -&pinctrl {
> - bt {
> - bt_enable_h: bt-enable-h {
> - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - bt_host_wake_l: bt-host-wake-l {
> - rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
> - };
> -
> - bt_wake_l: bt-wake-l {
> - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - leds {
> - work_led_enable_h: work-led-enable-h {
> - rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - diy_led_enable_h: diy-led-enable-h {
> - rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pcie {
> - pcie_clkreq_h: pcie-clkreq-h {
> - rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - pcie_reset_h: pcie-reset-h {
> - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pmic {
> - pmic_int_l: pmic-int-l {
> - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - sdio-pwrseq {
> - wifi_enable_h: wifi-enable-h {
> - rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -&pmu_io_domains {
> - pmuio1-supply = <&vcc3v3_pmu>;
> - pmuio2-supply = <&vcc3v3_pmu>;
> - vccio1-supply = <&vcc_3v3>;
> - vccio2-supply = <&vcc_1v8>;
> - vccio3-supply = <&vccio_sd>;
> - vccio4-supply = <&vcc_1v8>;
> - vccio5-supply = <&vcc_3v3>;
> - vccio6-supply = <&vcc_3v3>;
> - vccio7-supply = <&vcc_3v3>;
> - status = "okay";
> -};
> -
> -/*
> - * saradc is exposed on CM1 / Module1A
> - * pin 94 - saradc_vin3
> - * pin 96 - saradc_vin2
> - */
> -&saradc {
> - vref-supply = <&vcca_1v8>;
> - status = "disabled";
> -};
> -
> -&sdhci {
> - bus-width = <8>;
> - mmc-hs200-1_8v;
> - non-removable;
> - vmmc-supply = <&vcc_3v3>;
> - vqmmc-supply = <&vcc_1v8>;
> - status = "okay";
> -};
> -
> -&sdmmc0 {
> - broken-cd;
> - bus-width = <4>;
> - cap-sd-highspeed;
> - disable-wp;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> - vqmmc-supply = <&vccio_sd>;
> - status = "disabled";
> -};
> -
> -&sdmmc1 {
> - bus-width = <4>;
> - cap-sd-highspeed;
> - cap-sdio-irq;
> - keep-power-in-suspend;
> - mmc-pwrseq = <&sdio_pwrseq>;
> - non-removable;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
> - sd-uhs-sdr50;
> - vmmc-supply = <&vcc3v3_sys>;
> - vqmmc-supply = <&vcc_1v8>;
> - status = "okay";
> -};
> -
> -/*
> - * spi3 is exposed on CM1 / Module1A
> - * pin 37 - spi3_cs1_m0
> - * pin 38 - spi3_clk_m0
> - * pin 39 - spi3_cs0_m0
> - * pin 40 - spi3_miso_m0, shared with i2s1_8ch
> - * pin 44 - spi3_mosi_m0
> - */
> -&spi3 {
> - status = "disabled";
> -};
> -
> -&tsadc {
> - status = "okay";
> -};
> -
> -&uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
> - uart-has-rtscts;
> - status = "okay";
> -
> - bluetooth {
> - compatible = "brcm,bcm43438-bt";
> - clocks = <&rk809 1>;
> - clock-names = "lpo";
> - device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
> - host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
> - shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
> - vbat-supply = <&vcc3v3_sys>;
> - vddio-supply = <&vcca1v8_pmu>;
> - };
> -};
> -
> -/*
> - * uart2 is exposed on CM1 / Module1A
> - * pin 51 - uart2_rx_m0
> - * pin 55 - uart2_tx_m0
> - */
> -&uart2 {
> - status = "disabled";
> -};
> -
> -/*
> - * uart7 is exposed on CM1 / Module1A
> - * pin 46 - uart7_tx_m2
> - * pin 47 - uart7_rx_m2
> - */
> -&uart7 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart7m2_xfer>;
> - status = "disabled";
> -};
> -
> -/* dwc3_otg is the only usb port available */
> -&usb2phy0 {
> - status = "disabled";
> -};
> -
> -&usb2phy0_otg {
> - status = "disabled";
> -};
> -
> -&usb_host0_xhci {
> - status = "disabled";
> -};
> -
> -&vop {
> - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> - status = "okay";
> -};
> -
> -&vop_mmu {
> - status = "okay";
> -};
> -
> -&vp0 {
> - vp0_out_hdmi: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
> - reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> - remote-endpoint = <&hdmi_in_vp0>;
> - };
> -};
> diff --git a/arch/arm/dts/rk3566.dtsi b/arch/arm/dts/rk3566.dtsi
> deleted file mode 100644
> index 6c4b17d27bdc..000000000000
> --- a/arch/arm/dts/rk3566.dtsi
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -
> -#include "rk356x.dtsi"
> -
> -/ {
> - compatible = "rockchip,rk3566";
> -};
> -
> -&pipegrf {
> - compatible = "rockchip,rk3566-pipe-grf", "syscon";
> -};
> -
> -&power {
> - power-domain at RK3568_PD_PIPE {
> - reg = <RK3568_PD_PIPE>;
> - clocks = <&cru PCLK_PIPE>;
> - pm_qos = <&qos_pcie2x1>,
> - <&qos_sata1>,
> - <&qos_sata2>,
> - <&qos_usb3_0>,
> - <&qos_usb3_1>;
> - #power-domain-cells = <0>;
> - };
> -};
> -
> -&usb_host0_xhci {
> - phys = <&usb2phy0_otg>;
> - phy-names = "usb2-phy";
> - extcon = <&usb2phy0>;
> - maximum-speed = "high-speed";
> -};
> -
> -&vop {
> - compatible = "rockchip,rk3566-vop";
> -};
> diff --git a/arch/arm/dts/rk3568-bpi-r2-pro.dts b/arch/arm/dts/rk3568-bpi-r2-pro.dts
> deleted file mode 100644
> index f9127ddfbb7d..000000000000
> --- a/arch/arm/dts/rk3568-bpi-r2-pro.dts
> +++ /dev/null
> @@ -1,852 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Author: Frank Wunderlich <frank-w at public-files.de>
> - *
> - */
> -
> -/dts-v1/;
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include <dt-bindings/soc/rockchip,vop2.h>
> -#include "rk3568.dtsi"
> -
> -/ {
> - model = "Bananapi-R2 Pro (RK3568) DDR4 Board";
> - compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568";
> -
> - aliases {
> - ethernet0 = &gmac0;
> - ethernet1 = &gmac1;
> - mmc0 = &sdmmc0;
> - mmc1 = &sdhci;
> - };
> -
> - chosen: chosen {
> - stdout-path = "serial2:1500000n8";
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> - pinctrl-names = "default";
> - pinctrl-0 = <&blue_led_pin &green_led_pin>;
> -
> - blue_led: led-0 {
> - color = <LED_COLOR_ID_BLUE>;
> - default-state = "off";
> - function = LED_FUNCTION_STATUS;
> - gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
> - };
> -
> - green_led: led-1 {
> - color = <LED_COLOR_ID_GREEN>;
> - default-state = "on";
> - function = LED_FUNCTION_POWER;
> - gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> - };
> - };
> -
> - dc_12v: dc-12v-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "dc_12v";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - };
> -
> - hdmi-con {
> - compatible = "hdmi-connector";
> - type = "a";
> -
> - port {
> - hdmi_con_in: endpoint {
> - remote-endpoint = <&hdmi_out_con>;
> - };
> - };
> - };
> -
> - ir-receiver {
> - compatible = "gpio-ir-receiver";
> - gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&ir_receiver_pin>;
> - };
> -
> - vcc3v3_sys: vcc3v3-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&dc_12v>;
> - };
> -
> - vcc5v0_sys: vcc5v0-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&dc_12v>;
> - };
> -
> - pcie30_avdd0v9: pcie30-avdd0v9-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "pcie30_avdd0v9";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - vin-supply = <&vcc3v3_sys>;
> - };
> -
> - pcie30_avdd1v8: pcie30-avdd1v8-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "pcie30_avdd1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - vin-supply = <&vcc3v3_sys>;
> - };
> -
> - /* pi6c pcie clock generator feeds both ports */
> - vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_pcie";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - enable-active-high;
> - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
> - startup-delay-us = <200000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -
> - /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
> - vcc3v3_minipcie: vcc3v3-minipcie-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_minipcie";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - enable-active-high;
> - gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&minipcie_enable_h>;
> - startup-delay-us = <50000>;
> - vin-supply = <&vcc3v3_pi6c_05>;
> - };
> -
> - /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
> - vcc3v3_ngff: vcc3v3-ngff-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_ngff";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - enable-active-high;
> - gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&ngffpcie_enable_h>;
> - startup-delay-us = <50000>;
> - vin-supply = <&vcc3v3_pi6c_05>;
> - };
> -
> - vcc5v0_usb: vcc5v0-usb-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_usb";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&dc_12v>;
> - };
> -
> - vcc5v0_usb_host: vcc5v0-usb-host-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb_host_en>;
> - regulator-name = "vcc5v0_usb_host";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_usb>;
> - };
> -
> - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb_otg_en>;
> - regulator-name = "vcc5v0_usb_otg";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_usb>;
> - };
> -};
> -
> -&combphy0 {
> - /* used for USB3 */
> - status = "okay";
> -};
> -
> -&combphy1 {
> - /* used for USB3 */
> - status = "okay";
> -};
> -
> -&combphy2 {
> - /* used for SATA */
> - status = "okay";
> -};
> -
> -&gmac0 {
> - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
> - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
> - clock_in_out = "input";
> - phy-mode = "rgmii";
> - pinctrl-names = "default";
> - pinctrl-0 = <&gmac0_miim
> - &gmac0_tx_bus2
> - &gmac0_rx_bus2
> - &gmac0_rgmii_clk
> - &gmac0_rgmii_bus>;
> - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> - snps,reset-active-low;
> - /* Reset time is 20ms, 100ms for rtl8211f */
> - snps,reset-delays-us = <0 20000 100000>;
> - tx_delay = <0x4f>;
> - rx_delay = <0x0f>;
> - status = "okay";
> -
> - fixed-link {
> - speed = <1000>;
> - full-duplex;
> - pause;
> - };
> -};
> -
> -&gmac1 {
> - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
> - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
> - clock_in_out = "output";
> - phy-handle = <&rgmii_phy1>;
> - phy-mode = "rgmii";
> - pinctrl-names = "default";
> - pinctrl-0 = <&gmac1m1_miim
> - &gmac1m1_tx_bus2
> - &gmac1m1_rx_bus2
> - &gmac1m1_rgmii_clk
> - &gmac1m1_rgmii_bus>;
> -
> - snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
> - snps,reset-active-low;
> - /* Reset time is 20ms, 100ms for rtl8211f */
> - snps,reset-delays-us = <0 20000 100000>;
> -
> - tx_delay = <0x3c>;
> - rx_delay = <0x2f>;
> -
> - status = "okay";
> -};
> -
> -&gpu {
> - mali-supply = <&vdd_gpu>;
> - status = "okay";
> -};
> -
> -&hdmi {
> - avdd-0v9-supply = <&vdda0v9_image>;
> - avdd-1v8-supply = <&vcca1v8_image>;
> - status = "okay";
> -};
> -
> -&hdmi_in {
> - hdmi_in_vp0: endpoint {
> - remote-endpoint = <&vp0_out_hdmi>;
> - };
> -};
> -
> -&hdmi_out {
> - hdmi_out_con: endpoint {
> - remote-endpoint = <&hdmi_con_in>;
> - };
> -};
> -
> -&hdmi_sound {
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> -
> - rk809: pmic at 20 {
> - compatible = "rockchip,rk809";
> - reg = <0x20>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> - #clock-cells = <1>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pmic_int>;
> - rockchip,system-power-controller;
> - vcc1-supply = <&vcc3v3_sys>;
> - vcc2-supply = <&vcc3v3_sys>;
> - vcc3-supply = <&vcc3v3_sys>;
> - vcc4-supply = <&vcc3v3_sys>;
> - vcc5-supply = <&vcc3v3_sys>;
> - vcc6-supply = <&vcc3v3_sys>;
> - vcc7-supply = <&vcc3v3_sys>;
> - vcc8-supply = <&vcc3v3_sys>;
> - vcc9-supply = <&vcc3v3_sys>;
> - wakeup-source;
> -
> - regulators {
> - vdd_logic: DCDC_REG1 {
> - regulator-name = "vdd_logic";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdd_gpu: DCDC_REG2 {
> - regulator-name = "vdd_gpu";
> - regulator-always-on;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_ddr: DCDC_REG3 {
> - regulator-name = "vcc_ddr";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - };
> - };
> -
> - vdd_npu: DCDC_REG4 {
> - regulator-name = "vdd_npu";
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_1v8: DCDC_REG5 {
> - regulator-name = "vcc_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_image: LDO_REG1 {
> - regulator-name = "vdda0v9_image";
> - regulator-always-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda_0v9: LDO_REG2 {
> - regulator-name = "vdda_0v9";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_pmu: LDO_REG3 {
> - regulator-name = "vdda0v9_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vccio_acodec: LDO_REG4 {
> - regulator-name = "vccio_acodec";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vccio_sd: LDO_REG5 {
> - regulator-name = "vccio_sd";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_pmu: LDO_REG6 {
> - regulator-name = "vcc3v3_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcca_1v8: LDO_REG7 {
> - regulator-name = "vcca_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcca1v8_pmu: LDO_REG8 {
> - regulator-name = "vcca1v8_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vcca1v8_image: LDO_REG9 {
> - regulator-name = "vcca1v8_image";
> - regulator-always-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_3v3: SWITCH_REG1 {
> - regulator-name = "vcc_3v3";
> - regulator-always-on;
> - regulator-boot-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_sd: SWITCH_REG2 {
> - regulator-name = "vcc3v3_sd";
> - regulator-always-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> - };
> - };
> -};
> -
> -&i2c3 {
> - status = "okay";
> -
> - hym8563: rtc at 51 {
> - compatible = "haoyu,hym8563";
> - reg = <0x51>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>;
> - #clock-cells = <0>;
> - clock-output-names = "rtcic_32kout";
> - pinctrl-names = "default";
> - pinctrl-0 = <&hym8563_int>;
> - wakeup-source;
> - };
> -};
> -
> -&i2c5 {
> - /* pin 3 (SDA) + 4 (SCL) of header con2 */
> - status = "disabled";
> -};
> -
> -&i2s0_8ch {
> - /* hdmi sound */
> - status = "okay";
> -};
> -
> -&mdio0 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - switch at 0 {
> - compatible = "mediatek,mt7531";
> - reg = <0>;
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port at 1 {
> - reg = <1>;
> - label = "lan0";
> - };
> -
> - port at 2 {
> - reg = <2>;
> - label = "lan1";
> - };
> -
> - port at 3 {
> - reg = <3>;
> - label = "lan2";
> - };
> -
> - port at 4 {
> - reg = <4>;
> - label = "lan3";
> - };
> -
> - port at 5 {
> - reg = <5>;
> - label = "cpu";
> - ethernet = <&gmac0>;
> - phy-mode = "rgmii";
> -
> - fixed-link {
> - speed = <1000>;
> - full-duplex;
> - pause;
> - };
> - };
> - };
> - };
> -};
> -
> -&mdio1 {
> - rgmii_phy1: ethernet-phy at 0 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <0x0>;
> - };
> -};
> -
> -&pcie30phy {
> - data-lanes = <1 2>;
> - phy-supply = <&vcc3v3_pi6c_05>;
> - status = "okay";
> -};
> -
> -&pcie3x1 {
> - /* M.2 slot */
> - num-lanes = <1>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&ngffpcie_reset_h>;
> - reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_ngff>;
> - status = "okay";
> -};
> -
> -&pcie3x2 {
> - /* mPCIe slot */
> - num-lanes = <1>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&minipcie_reset_h>;
> - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_minipcie>;
> - status = "okay";
> -};
> -
> -&pinctrl {
> - leds {
> - blue_led_pin: blue-led-pin {
> - rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - green_led_pin: green-led-pin {
> - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - hym8563 {
> - hym8563_int: hym8563-int {
> - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - ir-receiver {
> - ir_receiver_pin: ir-receiver-pin {
> - rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pcie {
> - minipcie_enable_h: minipcie-enable-h {
> - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>;
> - };
> -
> - ngffpcie_enable_h: ngffpcie-enable-h {
> - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>;
> - };
> -
> - minipcie_reset_h: minipcie-reset-h {
> - rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>;
> - };
> -
> - ngffpcie_reset_h: ngffpcie-reset-h {
> - rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>;
> - };
> - };
> -
> - pmic {
> - pmic_int: pmic_int {
> - rockchip,pins =
> - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - usb {
> - vcc5v0_usb_host_en: vcc5v0_usb_host_en {
> - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
> - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -&pmu_io_domains {
> - pmuio1-supply = <&vcc3v3_pmu>;
> - pmuio2-supply = <&vcc3v3_pmu>;
> - vccio1-supply = <&vccio_acodec>;
> - vccio3-supply = <&vccio_sd>;
> - vccio4-supply = <&vcc_3v3>;
> - vccio5-supply = <&vcc_3v3>;
> - vccio6-supply = <&vcc_1v8>;
> - vccio7-supply = <&vcc_3v3>;
> - status = "okay";
> -};
> -
> -&pwm8 {
> - /* fan 5v - gnd - pwm */
> - status = "okay";
> -};
> -
> -&pwm10 {
> - /* pin 7 of header con2 */
> - status = "disabled";
> -};
> -
> -&pwm11 {
> - /* pin 15 of header con2 */
> - status = "disabled";
> -};
> -
> -&pwm12 {
> - /* pin 21 of header con2 */
> - /* shared with uart9 + spi3 */
> - pinctrl-0 = <&pwm12m1_pins>;
> - status = "disabled";
> -};
> -
> -&pwm13 {
> - /* pin 24 of header con2 */
> - /* shared with uart9 */
> - pinctrl-0 = <&pwm13m1_pins>;
> - status = "disabled";
> -};
> -
> -&pwm14 {
> - /* pin 23 of header con2 */
> - /* shared with spi3 */
> - pinctrl-0 = <&pwm14m1_pins>;
> - status = "disabled";
> -};
> -
> -&pwm15 {
> - /* pin 19 of header con2 */
> - /* shared with spi3 */
> - pinctrl-0 = <&pwm15m1_pins>;
> - status = "disabled";
> -};
> -
> -&saradc {
> - vref-supply = <&vcca_1v8>;
> - status = "okay";
> -};
> -
> -&sata2 {
> - status = "okay";
> -};
> -
> -&sdhci {
> - bus-width = <8>;
> - max-frequency = <200000000>;
> - non-removable;
> - pinctrl-names = "default";
> - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
> - status = "okay";
> -};
> -
> -&sdmmc0 {
> - bus-width = <4>;
> - cap-sd-highspeed;
> - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> - disable-wp;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> - sd-uhs-sdr104;
> - vmmc-supply = <&vcc3v3_sd>;
> - vqmmc-supply = <&vccio_sd>;
> - status = "okay";
> -};
> -
> -&spi3 {
> - /* pin 19 (MO) + 21 (MI) + 23 (CK) of header con2 */
> - /* shared with pwm12/14/15 and uart9 */
> - pinctrl-0 = <&spi3m1_pins>;
> - status = "disabled";
> -};
> -
> -&tsadc {
> - rockchip,hw-tshut-mode = <1>;
> - rockchip,hw-tshut-polarity = <0>;
> - status = "okay";
> -};
> -
> -&uart0 {
> - /* pin 8 (TX) + 10 (RX) (RTS:16, CTS:18) of header con2 */
> - status = "disabled";
> -};
> -
> -&uart2 {
> - /* debug-uart */
> - status = "okay";
> -};
> -
> -&uart7 {
> - /* pin 11 (TX) + 13 (RX) of header con2 */
> - pinctrl-0 = <&uart7m1_xfer>;
> - status = "disabled";
> -};
> -
> -&uart9 {
> - /* pin 21 (TX) + 24 (RX) of header con2 */
> - /* shared with pwm13 and pwm12/spi3 */
> - pinctrl-0 = <&uart9m1_xfer>;
> - status = "disabled";
> -};
> -
> -&usb_host0_ehci {
> - status = "okay";
> -};
> -
> -&usb_host0_ohci {
> - status = "okay";
> -};
> -
> -&usb_host0_xhci {
> - dr_mode = "host";
> - status = "okay";
> -};
> -
> -&usb_host1_ehci {
> - status = "okay";
> -};
> -
> -&usb_host1_ohci {
> - status = "okay";
> -};
> -
> -&usb_host1_xhci {
> - status = "okay";
> -};
> -
> -&usb2phy0 {
> - status = "okay";
> -};
> -
> -&usb2phy0_host {
> - phy-supply = <&vcc5v0_usb_host>;
> - status = "okay";
> -};
> -
> -&usb2phy0_otg {
> - phy-supply = <&vcc5v0_usb_otg>;
> - status = "okay";
> -};
> -
> -&usb2phy1 {
> - /* USB for PCIe/M2 */
> - status = "okay";
> -};
> -
> -&usb2phy1_host {
> - status = "okay";
> -};
> -
> -&usb2phy1_otg {
> - status = "okay";
> -};
> -
> -&vop {
> - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> - status = "okay";
> -};
> -
> -&vop_mmu {
> - status = "okay";
> -};
> -
> -&vp0 {
> - vp0_out_hdmi: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
> - reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> - remote-endpoint = <&hdmi_in_vp0>;
> - };
> -};
> diff --git a/arch/arm/dts/rk3568-evb.dts b/arch/arm/dts/rk3568-evb.dts
> deleted file mode 100644
> index 19f8fc369b13..000000000000
> --- a/arch/arm/dts/rk3568-evb.dts
> +++ /dev/null
> @@ -1,689 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> - *
> - */
> -
> -/dts-v1/;
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include <dt-bindings/soc/rockchip,vop2.h>
> -#include "rk3568.dtsi"
> -
> -/ {
> - model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
> - compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568";
> -
> - aliases {
> - ethernet0 = &gmac0;
> - ethernet1 = &gmac1;
> - mmc0 = &sdmmc0;
> - mmc1 = &sdhci;
> - };
> -
> - chosen: chosen {
> - stdout-path = "serial2:1500000n8";
> - };
> -
> - dc_12v: dc-12v {
> - compatible = "regulator-fixed";
> - regulator-name = "dc_12v";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - };
> -
> - hdmi-con {
> - compatible = "hdmi-connector";
> - type = "a";
> -
> - port {
> - hdmi_con_in: endpoint {
> - remote-endpoint = <&hdmi_out_con>;
> - };
> - };
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> -
> - led_work: led-0 {
> - gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
> - function = LED_FUNCTION_HEARTBEAT;
> - color = <LED_COLOR_ID_BLUE>;
> - linux,default-trigger = "heartbeat";
> - pinctrl-names = "default";
> - pinctrl-0 = <&led_work_en>;
> - };
> - };
> -
> - rk809-sound {
> - compatible = "simple-audio-card";
> - simple-audio-card,format = "i2s";
> - simple-audio-card,name = "Analog RK809";
> - simple-audio-card,mclk-fs = <256>;
> -
> - simple-audio-card,cpu {
> - sound-dai = <&i2s1_8ch>;
> - };
> - simple-audio-card,codec {
> - sound-dai = <&rk809>;
> - };
> - };
> -
> - vcc3v3_sys: vcc3v3-sys {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&dc_12v>;
> - };
> -
> - vcc5v0_sys: vcc5v0-sys {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&dc_12v>;
> - };
> -
> - vcc5v0_usb: vcc5v0-usb {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_usb";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&dc_12v>;
> - };
> -
> - vcc5v0_usb_host: vcc5v0-usb-host {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb_host_en>;
> - regulator-name = "vcc5v0_usb_host";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_usb>;
> - };
> -
> - vcc5v0_usb_otg: vcc5v0-usb-otg {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb_otg_en>;
> - regulator-name = "vcc5v0_usb_otg";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_usb>;
> - };
> -
> - vcc3v3_lcd0_n: vcc3v3-lcd0-n {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_lcd0_n";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - enable-active-high;
> - gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
> - vin-supply = <&vcc3v3_sys>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc3v3_lcd0_n_en>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_lcd1_n: vcc3v3-lcd1-n {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_lcd1_n";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - enable-active-high;
> - gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
> - vin-supply = <&vcc3v3_sys>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc3v3_lcd1_n_en>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -};
> -
> -&combphy0 {
> - status = "okay";
> -};
> -
> -&combphy1 {
> - status = "okay";
> -};
> -
> -&cpu0 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu1 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu2 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu3 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&gmac0 {
> - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
> - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
> - assigned-clock-rates = <0>, <125000000>;
> - clock_in_out = "output";
> - phy-handle = <&rgmii_phy0>;
> - phy-mode = "rgmii-id";
> - pinctrl-names = "default";
> - pinctrl-0 = <&gmac0_miim
> - &gmac0_tx_bus2
> - &gmac0_rx_bus2
> - &gmac0_rgmii_clk
> - &gmac0_rgmii_bus>;
> - status = "okay";
> -};
> -
> -&gmac1 {
> - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
> - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
> - assigned-clock-rates = <0>, <125000000>;
> - clock_in_out = "output";
> - phy-handle = <&rgmii_phy1>;
> - phy-mode = "rgmii-id";
> - pinctrl-names = "default";
> - pinctrl-0 = <&gmac1m1_miim
> - &gmac1m1_tx_bus2
> - &gmac1m1_rx_bus2
> - &gmac1m1_rgmii_clk
> - &gmac1m1_rgmii_bus>;
> - status = "okay";
> -};
> -
> -&gpu {
> - mali-supply = <&vdd_gpu>;
> - status = "okay";
> -};
> -
> -&hdmi {
> - avdd-0v9-supply = <&vdda0v9_image>;
> - avdd-1v8-supply = <&vcca1v8_image>;
> - status = "okay";
> -};
> -
> -&hdmi_in {
> - hdmi_in_vp0: endpoint {
> - remote-endpoint = <&vp0_out_hdmi>;
> - };
> -};
> -
> -&hdmi_out {
> - hdmi_out_con: endpoint {
> - remote-endpoint = <&hdmi_con_in>;
> - };
> -};
> -
> -&hdmi_sound {
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> -
> - vdd_cpu: regulator at 1c {
> - compatible = "tcs,tcs4525";
> - reg = <0x1c>;
> - fcs,suspend-voltage-selector = <1>;
> - regulator-name = "vdd_cpu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1150000>;
> - regulator-ramp-delay = <2300>;
> - vin-supply = <&vcc5v0_sys>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - rk809: pmic at 20 {
> - compatible = "rockchip,rk809";
> - reg = <0x20>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> - assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
> - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
> - #clock-cells = <1>;
> - clock-names = "mclk";
> - clocks = <&cru I2S1_MCLKOUT_TX>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
> - rockchip,system-power-controller;
> - #sound-dai-cells = <0>;
> - vcc1-supply = <&vcc3v3_sys>;
> - vcc2-supply = <&vcc3v3_sys>;
> - vcc3-supply = <&vcc3v3_sys>;
> - vcc4-supply = <&vcc3v3_sys>;
> - vcc5-supply = <&vcc3v3_sys>;
> - vcc6-supply = <&vcc3v3_sys>;
> - vcc7-supply = <&vcc3v3_sys>;
> - vcc8-supply = <&vcc3v3_sys>;
> - vcc9-supply = <&vcc3v3_sys>;
> - wakeup-source;
> -
> - regulators {
> - vdd_logic: DCDC_REG1 {
> - regulator-name = "vdd_logic";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdd_gpu: DCDC_REG2 {
> - regulator-name = "vdd_gpu";
> - regulator-always-on;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_ddr: DCDC_REG3 {
> - regulator-name = "vcc_ddr";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - };
> - };
> -
> - vdd_npu: DCDC_REG4 {
> - regulator-name = "vdd_npu";
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_1v8: DCDC_REG5 {
> - regulator-name = "vcc_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_image: LDO_REG1 {
> - regulator-name = "vdda0v9_image";
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda_0v9: LDO_REG2 {
> - regulator-name = "vdda_0v9";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_pmu: LDO_REG3 {
> - regulator-name = "vdda0v9_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vccio_acodec: LDO_REG4 {
> - regulator-name = "vccio_acodec";
> - regulator-always-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vccio_sd: LDO_REG5 {
> - regulator-name = "vccio_sd";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_pmu: LDO_REG6 {
> - regulator-name = "vcc3v3_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcca_1v8: LDO_REG7 {
> - regulator-name = "vcca_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcca1v8_pmu: LDO_REG8 {
> - regulator-name = "vcca1v8_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vcca1v8_image: LDO_REG9 {
> - regulator-name = "vcca1v8_image";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_3v3: SWITCH_REG1 {
> - regulator-name = "vcc_3v3";
> - regulator-always-on;
> - regulator-boot-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_sd: SWITCH_REG2 {
> - regulator-name = "vcc3v3_sd";
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> - };
> -
> - codec {
> - mic-in-differential;
> - };
> - };
> -};
> -
> -&i2c1 {
> - status = "okay";
> -
> - touchscreen0: goodix at 14 {
> - compatible = "goodix,gt1151";
> - reg = <0x14>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
> - AVDD28-supply = <&vcc3v3_lcd0_n>;
> - irq-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&touch_int &touch_rst>;
> - reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
> - VDDIO-supply = <&vcc3v3_lcd0_n>;
> - };
> -};
> -
> -&i2s0_8ch {
> - status = "okay";
> -};
> -
> -&i2s1_8ch {
> - rockchip,trcm-sync-tx-only;
> - status = "okay";
> -};
> -
> -&mdio0 {
> - rgmii_phy0: ethernet-phy at 0 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <0x0>;
> - reset-assert-us = <20000>;
> - reset-deassert-us = <100000>;
> - reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
> - };
> -};
> -
> -&mdio1 {
> - rgmii_phy1: ethernet-phy at 0 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <0x0>;
> - reset-assert-us = <20000>;
> - reset-deassert-us = <100000>;
> - reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
> - };
> -};
> -
> -&pinctrl {
> - display {
> - vcc3v3_lcd0_n_en: vcc3v3_lcd0_n_en {
> - rockchip,pins = <0 RK_PC7 0 &pcfg_pull_none>;
> - };
> - vcc3v3_lcd1_n_en: vcc3v3_lcd1_n_en {
> - rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>;
> - };
> - };
> -
> - leds {
> - led_work_en: led_work_en {
> - rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pmic {
> - pmic_int: pmic_int {
> - rockchip,pins =
> - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - touchscreen {
> - touch_int: touch_int {
> - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - touch_rst: touch_rst {
> - rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - usb {
> - vcc5v0_usb_host_en: vcc5v0_usb_host_en {
> - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
> - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -&pmu_io_domains {
> - pmuio1-supply = <&vcc3v3_pmu>;
> - pmuio2-supply = <&vcc3v3_pmu>;
> - vccio1-supply = <&vccio_acodec>;
> - vccio2-supply = <&vcc_1v8>;
> - vccio3-supply = <&vccio_sd>;
> - vccio4-supply = <&vcc_1v8>;
> - vccio5-supply = <&vcc_3v3>;
> - vccio6-supply = <&vcc_1v8>;
> - vccio7-supply = <&vcc_3v3>;
> - status = "okay";
> -};
> -
> -&saradc {
> - vref-supply = <&vcca_1v8>;
> - status = "okay";
> -};
> -
> -&sdhci {
> - bus-width = <8>;
> - max-frequency = <200000000>;
> - non-removable;
> - pinctrl-names = "default";
> - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
> - status = "okay";
> -};
> -
> -&sdmmc0 {
> - bus-width = <4>;
> - cap-sd-highspeed;
> - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> - disable-wp;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> - sd-uhs-sdr104;
> - vmmc-supply = <&vcc3v3_sd>;
> - vqmmc-supply = <&vccio_sd>;
> - status = "okay";
> -};
> -
> -&tsadc {
> - rockchip,hw-tshut-mode = <1>;
> - rockchip,hw-tshut-polarity = <0>;
> - status = "okay";
> -};
> -
> -&uart2 {
> - status = "okay";
> -};
> -
> -&usb_host0_ehci {
> - status = "okay";
> -};
> -
> -&usb_host0_ohci {
> - status = "okay";
> -};
> -
> -&usb_host0_xhci {
> - extcon = <&usb2phy0>;
> - status = "okay";
> -};
> -
> -&usb_host1_ehci {
> - status = "okay";
> -};
> -
> -&usb_host1_ohci {
> - status = "okay";
> -};
> -
> -&usb_host1_xhci {
> - status = "okay";
> -};
> -
> -&usb2phy0 {
> - status = "okay";
> -};
> -
> -&usb2phy0_host {
> - phy-supply = <&vcc5v0_usb_host>;
> - status = "okay";
> -};
> -
> -&usb2phy0_otg {
> - phy-supply = <&vcc5v0_usb_otg>;
> - status = "okay";
> -};
> -
> -&usb2phy1 {
> - status = "okay";
> -};
> -
> -&usb2phy1_host {
> - phy-supply = <&vcc5v0_usb_host>;
> - status = "okay";
> -};
> -
> -&usb2phy1_otg {
> - phy-supply = <&vcc5v0_usb_host>;
> - status = "okay";
> -};
> -
> -&vop {
> - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> - status = "okay";
> -};
> -
> -&vop_mmu {
> - status = "okay";
> -};
> -
> -&vp0 {
> - vp0_out_hdmi: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
> - reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> - remote-endpoint = <&hdmi_in_vp0>;
> - };
> -};
> diff --git a/arch/arm/dts/rk3568-lubancat-2.dts b/arch/arm/dts/rk3568-lubancat-2.dts
> deleted file mode 100644
> index a8a4cc190eb3..000000000000
> --- a/arch/arm/dts/rk3568-lubancat-2.dts
> +++ /dev/null
> @@ -1,730 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -
> -/*
> - * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> - * Copyright (c) 2022 EmbedFire <embedfire at embedfire.com>
> - */
> -
> -/dts-v1/;
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include <dt-bindings/soc/rockchip,vop2.h>
> -#include "rk3568.dtsi"
> -
> -/ {
> - model = "EmbedFire LubanCat 2";
> - compatible = "embedfire,lubancat-2", "rockchip,rk3568";
> -
> - aliases {
> - ethernet0 = &gmac0;
> - ethernet1 = &gmac1;
> - mmc0 = &sdmmc0;
> - mmc1 = &sdhci;
> - };
> -
> - chosen: chosen {
> - stdout-path = "serial2:1500000n8";
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> -
> - user_led: user-led {
> - label = "user_led";
> - linux,default-trigger = "heartbeat";
> - default-state = "on";
> - gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&user_led_pin>;
> - };
> - };
> -
> - hdmi-con {
> - compatible = "hdmi-connector";
> - type = "a";
> -
> - port {
> - hdmi_con_in: endpoint {
> - remote-endpoint = <&hdmi_out_con>;
> - };
> - };
> - };
> -
> - dc_5v: dc-5v-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "dc_5v";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - };
> -
> - vcc3v3_sys: vcc3v3-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -
> - vcc5v0_sys: vcc5v0-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&dc_5v>;
> - };
> -
> - vcc3v3_m2_pcie: vcc3v3-m2-pcie-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "m2_pcie_3v3";
> - enable-active-high;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
> - pinctrl-0 = <&vcc3v3_m2_pcie_en>;
> - pinctrl-names = "default";
> - startup-delay-us = <200000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -
> - vcc3v3_mini_pcie: vcc3v3-mini-pcie-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "minipcie_3v3";
> - enable-active-high;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - gpio = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
> - pinctrl-0 = <&vcc3v3_mini_pcie_en>;
> - pinctrl-names = "default";
> - startup-delay-us = <5000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -
> - vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_usb20_host";
> - enable-active-high;
> - gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> - pinctrl-0 = <&vcc5v0_usb20_host_en>;
> - pinctrl-names = "default";
> - };
> -
> - vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_usb30_host";
> - enable-active-high;
> - gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
> - pinctrl-0 = <&vcc5v0_usb30_host_en>;
> - pinctrl-names = "default";
> - };
> -
> - vcc5v0_otg_vbus: vcc5v0-otg-vbus-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_otg_vbus";
> - enable-active-high;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
> - pinctrl-0 = <&vcc5v0_otg_vbus_en>;
> - pinctrl-names = "default";
> - };
> -};
> -
> -&combphy0 {
> - status = "okay";
> -};
> -
> -&combphy1 {
> - status = "okay";
> -};
> -
> -&combphy2 {
> - status = "okay";
> -};
> -
> -&cpu0 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu1 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu2 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu3 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&gpu {
> - mali-supply = <&vdd_gpu>;
> - status = "okay";
> -};
> -
> -&hdmi {
> - avdd-0v9-supply = <&vdda0v9_image>;
> - avdd-1v8-supply = <&vcca1v8_image>;
> - status = "okay";
> -};
> -
> -&hdmi_in {
> - hdmi_in_vp0: endpoint {
> - remote-endpoint = <&vp0_out_hdmi>;
> - };
> -};
> -
> -&hdmi_out {
> - hdmi_out_con: endpoint {
> - remote-endpoint = <&hdmi_con_in>;
> - };
> -};
> -
> -&hdmi_sound {
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> -
> - vdd_cpu: regulator at 1c {
> - compatible = "tcs,tcs4525";
> - reg = <0x1c>;
> - fcs,suspend-voltage-selector = <1>;
> - regulator-name = "vdd_cpu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1150000>;
> - regulator-ramp-delay = <2300>;
> - vin-supply = <&vcc5v0_sys>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - rk809: pmic at 20 {
> - compatible = "rockchip,rk809";
> - reg = <0x20>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> - assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
> - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
> - #clock-cells = <1>;
> - clock-names = "mclk";
> - clocks = <&cru I2S1_MCLKOUT_TX>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pmic_int>;
> - rockchip,system-power-controller;
> - #sound-dai-cells = <0>;
> - vcc1-supply = <&vcc3v3_sys>;
> - vcc2-supply = <&vcc3v3_sys>;
> - vcc3-supply = <&vcc3v3_sys>;
> - vcc4-supply = <&vcc3v3_sys>;
> - vcc5-supply = <&vcc3v3_sys>;
> - vcc6-supply = <&vcc3v3_sys>;
> - vcc7-supply = <&vcc3v3_sys>;
> - vcc8-supply = <&vcc3v3_sys>;
> - vcc9-supply = <&vcc3v3_sys>;
> - wakeup-source;
> -
> - regulators {
> - vdd_logic: DCDC_REG1 {
> - regulator-name = "vdd_logic";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> - regulator-initial-mode = <0x2>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdd_gpu: DCDC_REG2 {
> - regulator-name = "vdd_gpu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> - regulator-initial-mode = <0x2>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_ddr: DCDC_REG3 {
> - regulator-name = "vcc_ddr";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - };
> - };
> -
> - vdd_npu: DCDC_REG4 {
> - regulator-name = "vdd_npu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> - regulator-initial-mode = <0x2>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_1v8: DCDC_REG5 {
> - regulator-name = "vcc_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_image: LDO_REG1 {
> - regulator-name = "vdda0v9_image";
> - regulator-boot-on;
> - regulator-always-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda_0v9: LDO_REG2 {
> - regulator-name = "vdda_0v9";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_pmu: LDO_REG3 {
> - regulator-name = "vdda0v9_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vccio_acodec: LDO_REG4 {
> - regulator-name = "vccio_acodec";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vccio_sd: LDO_REG5 {
> - regulator-name = "vccio_sd";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_pmu: LDO_REG6 {
> - regulator-name = "vcc3v3_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcca_1v8: LDO_REG7 {
> - regulator-name = "vcca_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcca1v8_pmu: LDO_REG8 {
> - regulator-name = "vcca1v8_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vcca1v8_image: LDO_REG9 {
> - regulator-name = "vcca1v8_image";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_3v3: SWITCH_REG1 {
> - regulator-name = "vcc_3v3";
> - regulator-always-on;
> - regulator-boot-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_sd: SWITCH_REG2 {
> - regulator-name = "vcc3v3_sd";
> - regulator-always-on;
> - regulator-boot-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> - };
> - };
> -};
> -
> -&i2s1_8ch {
> - rockchip,trcm-sync-tx-only;
> - status = "okay";
> -};
> -
> -&gmac0 {
> - phy-mode = "rgmii";
> - clock_in_out = "output";
> -
> - snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
> - snps,reset-active-low;
> - /* Reset time is 20ms, 100ms for rtl8211f */
> - snps,reset-delays-us = <0 20000 100000>;
> -
> - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
> - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&gmac0_miim
> - &gmac0_tx_bus2
> - &gmac0_rx_bus2
> - &gmac0_rgmii_clk
> - &gmac0_rgmii_bus>;
> -
> - tx_delay = <0x22>;
> - rx_delay = <0x0e>;
> -
> - phy-handle = <&rgmii_phy0>;
> - status = "okay";
> -};
> -
> -&mdio0 {
> - rgmii_phy0: phy at 0 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <0x0>;
> - };
> -};
> -
> -&gmac1 {
> - phy-mode = "rgmii";
> - clock_in_out = "output";
> -
> - snps,reset-gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
> - snps,reset-active-low;
> - /* Reset time is 20ms, 100ms for rtl8211f */
> - snps,reset-delays-us = <0 20000 100000>;
> -
> - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
> - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&gmac1m1_miim
> - &gmac1m1_tx_bus2
> - &gmac1m1_rx_bus2
> - &gmac1m1_rgmii_clk
> - &gmac1m1_rgmii_bus>;
> -
> - tx_delay = <0x21>;
> - rx_delay = <0x0e>;
> -
> - phy-handle = <&rgmii_phy1>;
> - status = "okay";
> -};
> -
> -&mdio1 {
> - rgmii_phy1: phy at 0 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <0x0>;
> - };
> -};
> -
> -&gic {
> - mbi-ranges = <94 31>, <229 31>, <289 31>;
> -};
> -
> -&pcie30phy {
> - status = "okay";
> -};
> -
> -&pcie3x2 {
> - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_m2_pcie>;
> - status = "okay";
> -};
> -
> -&pcie2x1 {
> - reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
> - disable-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_mini_pcie>;
> - status = "okay";
> -};
> -
> -&pmu_io_domains {
> - pmuio2-supply = <&vcc3v3_pmu>;
> - vccio1-supply = <&vccio_acodec>;
> - vccio3-supply = <&vccio_sd>;
> - vccio4-supply = <&vcc_1v8>;
> - vccio5-supply = <&vcc_3v3>;
> - vccio6-supply = <&vcc_1v8>;
> - vccio7-supply = <&vcc_3v3>;
> - status = "okay";
> -};
> -
> -&pwm8 {
> - status = "okay";
> -};
> -
> -&pwm9 {
> - status = "disabled";
> -};
> -
> -&pwm10 {
> - status = "disabled";
> -};
> -
> -&pwm14 {
> - status = "disabled";
> -};
> -
> -&spi3 {
> - pinctrl-0 = <&spi3m1_pins>;
> - status = "disabled";
> -};
> -
> -&uart2 {
> - status = "okay";
> -};
> -
> -&uart3 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart3m1_xfer>;
> - status = "disabled";
> -};
> -
> -&saradc {
> - vref-supply = <&vcca_1v8>;
> - status = "okay";
> -};
> -
> -&tsadc {
> - rockchip,hw-tshut-mode = <1>;
> - rockchip,hw-tshut-polarity = <0>;
> - status = "okay";
> -};
> -
> -&sdhci {
> - assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>;
> - assigned-clock-rates = <200000000>, <24000000>, <200000000>;
> - bus-width = <8>;
> - max-frequency = <200000000>;
> - mmc-hs200-1_8v;
> - non-removable;
> - pinctrl-names = "default";
> - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
> - supports-emmc;
> - status = "okay";
> -};
> -
> -&sdmmc0 {
> - max-frequency = <150000000>;
> - no-sdio;
> - no-mmc;
> - bus-width = <4>;
> - cap-mmc-highspeed;
> - cap-sd-highspeed;
> - disable-wp;
> - sd-uhs-sdr104;
> - vmmc-supply = <&vcc3v3_sd>;
> - vqmmc-supply = <&vccio_sd>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> - status = "okay";
> -};
> -
> -/* USB OTG/USB Host_1 USB 2.0 Comb */
> -&usb2phy0 {
> - status = "okay";
> -};
> -
> -&usb2phy0_host {
> - phy-supply = <&vcc5v0_usb30_host>;
> - status = "okay";
> -};
> -
> -&usb2phy0_otg {
> - phy-supply = <&vcc5v0_otg_vbus>;
> - status = "okay";
> -};
> -
> -&usb_host0_ehci {
> - status = "okay";
> -};
> -
> -&usb_host0_ohci {
> - status = "okay";
> -};
> -
> -/* USB Host_2/USB Host_3 USB 2.0 Comb */
> -&usb2phy1 {
> - status = "okay";
> -};
> -
> -&usb2phy1_host {
> - status = "okay";
> -};
> -
> -&usb2phy1_otg {
> - phy-supply = <&vcc5v0_usb20_host>;
> - status = "okay";
> -};
> -
> -&usb_host1_ehci {
> - status = "okay";
> -};
> -
> -&usb_host1_ohci {
> - status = "okay";
> -};
> -
> -/* MULTI_PHY0 For SATA0, USB3.0 OTG Only USB2.0 */
> -&usb_host0_xhci {
> - phys = <&usb2phy0_otg>;
> - phy-names = "usb2-phy";
> - extcon = <&usb2phy0>;
> - maximum-speed = "high-speed";
> - dr_mode = "host";
> - status = "okay";
> -};
> -
> -&sata0 {
> - status = "okay";
> -};
> -
> -/* USB3.0 Host */
> -&usb_host1_xhci {
> - status = "okay";
> -};
> -
> -&vop {
> - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> - status = "okay";
> -};
> -
> -&vop_mmu {
> - status = "okay";
> -};
> -
> -&vp0 {
> - vp0_out_hdmi: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
> - reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> - remote-endpoint = <&hdmi_in_vp0>;
> - };
> -};
> -
> -&pinctrl {
> - leds {
> - user_led_pin: user-status-led-pin {
> - rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - usb {
> - vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
> - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
> - rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - vcc5v0_otg_vbus_en: vcc5v0-otg-vbus-en {
> - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pcie {
> - vcc3v3_m2_pcie_en: vcc3v3-m2-pcie-en {
> - rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - vcc3v3_mini_pcie_en: vcc3v3-mini-pcie-en {
> - rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pmic {
> - pmic_int: pmic-int {
> - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -};
> diff --git a/arch/arm/dts/rk3568-nanopi-r5c.dts b/arch/arm/dts/rk3568-nanopi-r5c.dts
> deleted file mode 100644
> index c718b8dbb9c6..000000000000
> --- a/arch/arm/dts/rk3568-nanopi-r5c.dts
> +++ /dev/null
> @@ -1,112 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> -/*
> - * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
> - * (http://www.friendlyelec.com)
> - *
> - * Copyright (c) 2023 Tianling Shen <cnsztl at gmail.com>
> - */
> -
> -/dts-v1/;
> -#include "rk3568-nanopi-r5s.dtsi"
> -
> -/ {
> - model = "FriendlyElec NanoPi R5C";
> - compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568";
> -
> - gpio-keys {
> - compatible = "gpio-keys";
> - pinctrl-names = "default";
> - pinctrl-0 = <&reset_button_pin>;
> -
> - button-reset {
> - debounce-interval = <50>;
> - gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
> - label = "reset";
> - linux,code = <KEY_RESTART>;
> - };
> - };
> -
> - gpio-leds {
> - compatible = "gpio-leds";
> - pinctrl-names = "default";
> - pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>;
> -
> - led-lan {
> - color = <LED_COLOR_ID_GREEN>;
> - function = LED_FUNCTION_LAN;
> - gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
> - };
> -
> - power_led: led-power {
> - color = <LED_COLOR_ID_RED>;
> - function = LED_FUNCTION_POWER;
> - linux,default-trigger = "heartbeat";
> - gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
> - };
> -
> - led-wan {
> - color = <LED_COLOR_ID_GREEN>;
> - function = LED_FUNCTION_WAN;
> - gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
> - };
> -
> - led-wlan {
> - color = <LED_COLOR_ID_GREEN>;
> - function = LED_FUNCTION_WLAN;
> - gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
> - };
> - };
> -};
> -
> -&pcie2x1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie20_reset_pin>;
> - reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
> - status = "okay";
> -};
> -
> -&pcie3x1 {
> - num-lanes = <1>;
> - reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_pcie>;
> - status = "okay";
> -};
> -
> -&pcie3x2 {
> - num-lanes = <1>;
> - reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_pcie>;
> - status = "okay";
> -};
> -
> -&pinctrl {
> - gpio-leds {
> - lan_led_pin: lan-led-pin {
> - rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - power_led_pin: power-led-pin {
> - rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - wan_led_pin: wan-led-pin {
> - rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - wlan_led_pin: wlan-led-pin {
> - rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pcie {
> - pcie20_reset_pin: pcie20-reset-pin {
> - rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - rockchip-key {
> - reset_button_pin: reset-button-pin {
> - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -};
> diff --git a/arch/arm/dts/rk3568-nanopi-r5s.dts b/arch/arm/dts/rk3568-nanopi-r5s.dts
> deleted file mode 100644
> index b6ad8328c7eb..000000000000
> --- a/arch/arm/dts/rk3568-nanopi-r5s.dts
> +++ /dev/null
> @@ -1,136 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> -/*
> - * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
> - * (http://www.friendlyelec.com)
> - *
> - * Copyright (c) 2023 Tianling Shen <cnsztl at gmail.com>
> - */
> -
> -/dts-v1/;
> -#include "rk3568-nanopi-r5s.dtsi"
> -
> -/ {
> - model = "FriendlyElec NanoPi R5S";
> - compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568";
> -
> - aliases {
> - ethernet0 = &gmac0;
> - };
> -
> - gpio-leds {
> - compatible = "gpio-leds";
> - pinctrl-names = "default";
> - pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>;
> -
> - led-lan1 {
> - color = <LED_COLOR_ID_GREEN>;
> - function = LED_FUNCTION_LAN;
> - function-enumerator = <1>;
> - gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
> - };
> -
> - led-lan2 {
> - color = <LED_COLOR_ID_GREEN>;
> - function = LED_FUNCTION_LAN;
> - function-enumerator = <2>;
> - gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
> - };
> -
> - power_led: led-power {
> - color = <LED_COLOR_ID_RED>;
> - function = LED_FUNCTION_POWER;
> - linux,default-trigger = "heartbeat";
> - gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
> - };
> -
> - led-wan {
> - color = <LED_COLOR_ID_GREEN>;
> - function = LED_FUNCTION_WAN;
> - gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
> - };
> - };
> -};
> -
> -&gmac0 {
> - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
> - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
> - assigned-clock-rates = <0>, <125000000>;
> - clock_in_out = "output";
> - phy-handle = <&rgmii_phy0>;
> - phy-mode = "rgmii";
> - pinctrl-names = "default";
> - pinctrl-0 = <&gmac0_miim
> - &gmac0_tx_bus2
> - &gmac0_rx_bus2
> - &gmac0_rgmii_clk
> - &gmac0_rgmii_bus>;
> - snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
> - snps,reset-active-low;
> - /* Reset time is 15ms, 50ms for rtl8211f */
> - snps,reset-delays-us = <0 15000 50000>;
> - tx_delay = <0x3c>;
> - rx_delay = <0x2f>;
> - status = "okay";
> -};
> -
> -&mdio0 {
> - rgmii_phy0: ethernet-phy at 1 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <1>;
> - pinctrl-0 = <ð_phy0_reset_pin>;
> - pinctrl-names = "default";
> - };
> -};
> -
> -&pcie2x1 {
> - num-lanes = <1>;
> - reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
> - status = "okay";
> -};
> -
> -&pcie30phy {
> - data-lanes = <1 2>;
> - status = "okay";
> -};
> -
> -&pcie3x1 {
> - num-lanes = <1>;
> - reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_pcie>;
> - status = "okay";
> -};
> -
> -&pcie3x2 {
> - num-lanes = <1>;
> - num-ib-windows = <8>;
> - num-ob-windows = <8>;
> - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_pcie>;
> - status = "okay";
> -};
> -
> -&pinctrl {
> - gmac0 {
> - eth_phy0_reset_pin: eth-phy0-reset-pin {
> - rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - gpio-leds {
> - lan1_led_pin: lan1-led-pin {
> - rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - lan2_led_pin: lan2-led-pin {
> - rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - power_led_pin: power-led-pin {
> - rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - wan_led_pin: wan-led-pin {
> - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> diff --git a/arch/arm/dts/rk3568-nanopi-r5s.dtsi b/arch/arm/dts/rk3568-nanopi-r5s.dtsi
> deleted file mode 100644
> index 93189f830640..000000000000
> --- a/arch/arm/dts/rk3568-nanopi-r5s.dtsi
> +++ /dev/null
> @@ -1,587 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> -/*
> - * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
> - * (http://www.friendlyelec.com)
> - *
> - * Copyright (c) 2023 Tianling Shen <cnsztl at gmail.com>
> - */
> -
> -/dts-v1/;
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/input/input.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include <dt-bindings/soc/rockchip,vop2.h>
> -#include "rk3568.dtsi"
> -
> -/ {
> - aliases {
> - mmc0 = &sdmmc0;
> - mmc1 = &sdhci;
> - };
> -
> - chosen: chosen {
> - stdout-path = "serial2:1500000n8";
> - };
> -
> - hdmi-con {
> - compatible = "hdmi-connector";
> - type = "a";
> -
> - port {
> - hdmi_con_in: endpoint {
> - remote-endpoint = <&hdmi_out_con>;
> - };
> - };
> - };
> -
> - vdd_usbc: vdd-usbc-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vdd_usbc";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - };
> -
> - vcc3v3_sys: vcc3v3-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vdd_usbc>;
> - };
> -
> - vcc5v0_sys: vcc5v0-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vdd_usbc>;
> - };
> -
> - vcc3v3_pcie: vcc3v3-pcie-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_pcie";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - enable-active-high;
> - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
> - startup-delay-us = <200000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -
> - vcc5v0_usb: vcc5v0-usb-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_usb";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vdd_usbc>;
> - };
> -
> - vcc5v0_usb_host: vcc5v0-usb-host-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb_host_en>;
> - regulator-name = "vcc5v0_usb_host";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_usb>;
> - };
> -
> - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb_otg_en>;
> - regulator-name = "vcc5v0_usb_otg";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_usb>;
> - };
> -
> - pcie30_avdd0v9: pcie30-avdd0v9-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "pcie30_avdd0v9";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - vin-supply = <&vcc3v3_sys>;
> - };
> -
> - pcie30_avdd1v8: pcie30-avdd1v8-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "pcie30_avdd1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - vin-supply = <&vcc3v3_sys>;
> - };
> -};
> -
> -&combphy0 {
> - status = "okay";
> -};
> -
> -&combphy1 {
> - status = "okay";
> -};
> -
> -&combphy2 {
> - status = "okay";
> -};
> -
> -&cpu0 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu1 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu2 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu3 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&gpu {
> - mali-supply = <&vdd_gpu>;
> - status = "okay";
> -};
> -
> -&hdmi {
> - avdd-0v9-supply = <&vdda0v9_image>;
> - avdd-1v8-supply = <&vcca1v8_image>;
> - status = "okay";
> -};
> -
> -&hdmi_in {
> - hdmi_in_vp0: endpoint {
> - remote-endpoint = <&vp0_out_hdmi>;
> - };
> -};
> -
> -&hdmi_out {
> - hdmi_out_con: endpoint {
> - remote-endpoint = <&hdmi_con_in>;
> - };
> -};
> -
> -&hdmi_sound {
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> -
> - vdd_cpu: regulator at 1c {
> - compatible = "tcs,tcs4525";
> - reg = <0x1c>;
> - fcs,suspend-voltage-selector = <1>;
> - regulator-name = "vdd_cpu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1150000>;
> - regulator-ramp-delay = <2300>;
> - vin-supply = <&vcc5v0_sys>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - rk809: pmic at 20 {
> - compatible = "rockchip,rk809";
> - reg = <0x20>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> - #clock-cells = <1>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pmic_int>;
> - rockchip,system-power-controller;
> - vcc1-supply = <&vcc3v3_sys>;
> - vcc2-supply = <&vcc3v3_sys>;
> - vcc3-supply = <&vcc3v3_sys>;
> - vcc4-supply = <&vcc3v3_sys>;
> - vcc5-supply = <&vcc3v3_sys>;
> - vcc6-supply = <&vcc3v3_sys>;
> - vcc7-supply = <&vcc3v3_sys>;
> - vcc8-supply = <&vcc3v3_sys>;
> - vcc9-supply = <&vcc3v3_sys>;
> - wakeup-source;
> -
> - regulators {
> - vdd_logic: DCDC_REG1 {
> - regulator-name = "vdd_logic";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdd_gpu: DCDC_REG2 {
> - regulator-name = "vdd_gpu";
> - regulator-always-on;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_ddr: DCDC_REG3 {
> - regulator-name = "vcc_ddr";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - };
> - };
> -
> - vdd_npu: DCDC_REG4 {
> - regulator-name = "vdd_npu";
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_1v8: DCDC_REG5 {
> - regulator-name = "vcc_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_image: LDO_REG1 {
> - regulator-name = "vdda0v9_image";
> - regulator-min-microvolt = <950000>;
> - regulator-max-microvolt = <950000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda_0v9: LDO_REG2 {
> - regulator-name = "vdda_0v9";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_pmu: LDO_REG3 {
> - regulator-name = "vdda0v9_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vccio_acodec: LDO_REG4 {
> - regulator-name = "vccio_acodec";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vccio_sd: LDO_REG5 {
> - regulator-name = "vccio_sd";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_pmu: LDO_REG6 {
> - regulator-name = "vcc3v3_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcca_1v8: LDO_REG7 {
> - regulator-name = "vcca_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcca1v8_pmu: LDO_REG8 {
> - regulator-name = "vcca1v8_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vcca1v8_image: LDO_REG9 {
> - regulator-name = "vcca1v8_image";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_3v3: SWITCH_REG1 {
> - regulator-name = "vcc_3v3";
> - regulator-always-on;
> - regulator-boot-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_sd: SWITCH_REG2 {
> - regulator-name = "vcc3v3_sd";
> - regulator-always-on;
> - regulator-boot-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> - };
> -
> - };
> -};
> -
> -&i2c5 {
> - status = "okay";
> -
> - hym8563: rtc at 51 {
> - compatible = "haoyu,hym8563";
> - reg = <0x51>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
> - #clock-cells = <0>;
> - clock-output-names = "rtcic_32kout";
> - pinctrl-names = "default";
> - pinctrl-0 = <&hym8563_int>;
> - wakeup-source;
> - };
> -};
> -
> -&i2s0_8ch {
> - status = "okay";
> -};
> -
> -&pcie30phy {
> - data-lanes = <1 2>;
> - status = "okay";
> -};
> -
> -&pinctrl {
> - hym8563 {
> - hym8563_int: hym8563-int {
> - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - pmic {
> - pmic_int: pmic-int {
> - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - usb {
> - vcc5v0_usb_host_en: vcc5v0-usb-host-en {
> - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
> - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -&pmu_io_domains {
> - pmuio1-supply = <&vcc3v3_pmu>;
> - pmuio2-supply = <&vcc3v3_pmu>;
> - vccio1-supply = <&vccio_acodec>;
> - vccio3-supply = <&vccio_sd>;
> - vccio4-supply = <&vcc_1v8>;
> - vccio5-supply = <&vcc_3v3>;
> - vccio6-supply = <&vcc_1v8>;
> - vccio7-supply = <&vcc_3v3>;
> - status = "okay";
> -};
> -
> -&saradc {
> - vref-supply = <&vcca_1v8>;
> - status = "okay";
> -};
> -
> -&sdhci {
> - bus-width = <8>;
> - max-frequency = <200000000>;
> - non-removable;
> - pinctrl-names = "default";
> - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
> - status = "okay";
> -};
> -
> -&sdmmc0 {
> - max-frequency = <150000000>;
> - no-sdio;
> - no-mmc;
> - bus-width = <4>;
> - cap-mmc-highspeed;
> - cap-sd-highspeed;
> - disable-wp;
> - vmmc-supply = <&vcc3v3_sd>;
> - vqmmc-supply = <&vccio_sd>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> - status = "okay";
> -};
> -
> -&tsadc {
> - rockchip,hw-tshut-mode = <1>;
> - rockchip,hw-tshut-polarity = <0>;
> - status = "okay";
> -};
> -
> -&uart2 {
> - status = "okay";
> -};
> -
> -&usb_host0_ehci {
> - status = "okay";
> -};
> -
> -&usb_host0_ohci {
> - status = "okay";
> -};
> -
> -&usb_host0_xhci {
> - extcon = <&usb2phy0>;
> - dr_mode = "host";
> - status = "okay";
> -};
> -
> -&usb_host1_ehci {
> - status = "okay";
> -};
> -
> -&usb_host1_ohci {
> - status = "okay";
> -};
> -
> -&usb_host1_xhci {
> - status = "okay";
> -};
> -
> -&usb2phy0 {
> - status = "okay";
> -};
> -
> -&usb2phy0_host {
> - phy-supply = <&vcc5v0_usb_host>;
> - status = "okay";
> -};
> -
> -&usb2phy0_otg {
> - status = "okay";
> -};
> -
> -&usb2phy1 {
> - status = "okay";
> -};
> -
> -&usb2phy1_host {
> - phy-supply = <&vcc5v0_usb_otg>;
> - status = "okay";
> -};
> -
> -&usb2phy1_otg {
> - status = "okay";
> -};
> -
> -&vop {
> - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> - status = "okay";
> -};
> -
> -&vop_mmu {
> - status = "okay";
> -};
> -
> -&vp0 {
> - vp0_out_hdmi: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
> - reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> - remote-endpoint = <&hdmi_in_vp0>;
> - };
> -};
> diff --git a/arch/arm/dts/rk3568-odroid-m1.dts b/arch/arm/dts/rk3568-odroid-m1.dts
> deleted file mode 100644
> index a337f547caf5..000000000000
> --- a/arch/arm/dts/rk3568-odroid-m1.dts
> +++ /dev/null
> @@ -1,741 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Copyright (c) 2022 Hardkernel Co., Ltd.
> - *
> - */
> -
> -/dts-v1/;
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include <dt-bindings/soc/rockchip,vop2.h>
> -#include "rk3568.dtsi"
> -
> -/ {
> - model = "Hardkernel ODROID-M1";
> - compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
> -
> - aliases {
> - ethernet0 = &gmac0;
> - i2c0 = &i2c3;
> - i2c3 = &i2c0;
> - mmc0 = &sdhci;
> - mmc1 = &sdmmc0;
> - serial0 = &uart1;
> - serial1 = &uart0;
> - };
> -
> - chosen {
> - stdout-path = "serial2:1500000n8";
> - };
> -
> - dc_12v: dc-12v-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "dc_12v";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - };
> -
> - hdmi-con {
> - compatible = "hdmi-connector";
> - type = "a";
> -
> - port {
> - hdmi_con_in: endpoint {
> - remote-endpoint = <&hdmi_out_con>;
> - };
> - };
> - };
> -
> - ir-receiver {
> - compatible = "gpio-ir-receiver";
> - gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&ir_receiver_pin>;
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> -
> - led_power: led-0 {
> - gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
> - function = LED_FUNCTION_POWER;
> - color = <LED_COLOR_ID_RED>;
> - default-state = "keep";
> - linux,default-trigger = "default-on";
> - pinctrl-names = "default";
> - pinctrl-0 = <&led_power_pin>;
> - };
> - led_work: led-1 {
> - gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
> - function = LED_FUNCTION_HEARTBEAT;
> - color = <LED_COLOR_ID_BLUE>;
> - linux,default-trigger = "heartbeat";
> - pinctrl-names = "default";
> - pinctrl-0 = <&led_work_pin>;
> - };
> - };
> -
> - rk809-sound {
> - compatible = "simple-audio-card";
> - pinctrl-names = "default";
> - pinctrl-0 = <&hp_det_pin>;
> - simple-audio-card,name = "Analog RK817";
> - simple-audio-card,format = "i2s";
> - simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
> - simple-audio-card,mclk-fs = <256>;
> - simple-audio-card,widgets =
> - "Headphone", "Headphones",
> - "Speaker", "Speaker";
> - simple-audio-card,routing =
> - "Headphones", "HPOL",
> - "Headphones", "HPOR",
> - "Speaker", "SPKO";
> -
> - simple-audio-card,cpu {
> - sound-dai = <&i2s1_8ch>;
> - };
> -
> - simple-audio-card,codec {
> - sound-dai = <&rk809>;
> - };
> - };
> -
> - vcc3v3_pcie: vcc3v3-pcie-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_pcie";
> - enable-active-high;
> - gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc3v3_pcie_en_pin>;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - startup-delay-us = <5000>;
> - vin-supply = <&vcc3v3_sys>;
> - };
> -
> - vcc3v3_sys: vcc3v3-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&dc_12v>;
> - };
> -
> - vcc5v0_sys: vcc5v0-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&dc_12v>;
> - };
> -
> - vcc5v0_usb_host: vcc5v0-usb-host-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_usb_host";
> - enable-active-high;
> - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -
> - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_usb_otg";
> - enable-active-high;
> - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb_otg_en_pin>;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -};
> -
> -&combphy0 {
> - /* Used for USB3 */
> - phy-supply = <&vcc5v0_usb_host>;
> - status = "okay";
> -};
> -
> -&combphy1 {
> - /* Used for USB3 */
> - phy-supply = <&vcc5v0_usb_otg>;
> - status = "okay";
> -};
> -
> -&combphy2 {
> - /* used for SATA */
> - status = "okay";
> -};
> -
> -&cpu0 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu1 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu2 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu3 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&gmac0 {
> - assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
> - assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
> - assigned-clock-rates = <0>, <125000000>;
> - clock_in_out = "output";
> - phy-handle = <&rgmii_phy0>;
> - phy-mode = "rgmii";
> - phy-supply = <&vcc3v3_sys>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&gmac0_miim
> - &gmac0_tx_bus2
> - &gmac0_rx_bus2
> - &gmac0_rgmii_clk
> - &gmac0_rgmii_bus>;
> - status = "okay";
> -
> - tx_delay = <0x4f>;
> - rx_delay = <0x2d>;
> -};
> -
> -&gpu {
> - mali-supply = <&vdd_gpu>;
> - status = "okay";
> -};
> -
> -&hdmi {
> - avdd-0v9-supply = <&vdda0v9_image>;
> - avdd-1v8-supply = <&vcca1v8_image>;
> - status = "okay";
> -};
> -
> -&hdmi_in {
> - hdmi_in_vp0: endpoint {
> - remote-endpoint = <&vp0_out_hdmi>;
> - };
> -};
> -
> -&hdmi_out {
> - hdmi_out_con: endpoint {
> - remote-endpoint = <&hdmi_con_in>;
> - };
> -};
> -
> -&hdmi_sound {
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> -
> - vdd_cpu: regulator at 1c {
> - compatible = "tcs,tcs4525";
> - reg = <0x1c>;
> - fcs,suspend-voltage-selector = <1>;
> - regulator-name = "vdd_cpu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1150000>;
> - regulator-ramp-delay = <2300>;
> - vin-supply = <&vcc3v3_sys>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - rk809: pmic at 20 {
> - compatible = "rockchip,rk809";
> - reg = <0x20>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> - assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
> - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
> - #clock-cells = <1>;
> - clock-names = "mclk";
> - clocks = <&cru I2S1_MCLKOUT_TX>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
> - rockchip,system-power-controller;
> - #sound-dai-cells = <0>;
> - vcc1-supply = <&vcc3v3_sys>;
> - vcc2-supply = <&vcc3v3_sys>;
> - vcc3-supply = <&vcc3v3_sys>;
> - vcc4-supply = <&vcc3v3_sys>;
> - vcc5-supply = <&vcc3v3_sys>;
> - vcc6-supply = <&vcc3v3_sys>;
> - vcc7-supply = <&vcc3v3_sys>;
> - vcc8-supply = <&vcc3v3_sys>;
> - vcc9-supply = <&vcc3v3_sys>;
> - wakeup-source;
> -
> - regulators {
> - vdd_logic: DCDC_REG1 {
> - regulator-name = "vdd_logic";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdd_gpu: DCDC_REG2 {
> - regulator-name = "vdd_gpu";
> - regulator-always-on;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_ddr: DCDC_REG3 {
> - regulator-name = "vcc_ddr";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - };
> - };
> -
> - vdd_npu: DCDC_REG4 {
> - regulator-name = "vdd_npu";
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_1v8: DCDC_REG5 {
> - regulator-name = "vcc_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_image: LDO_REG1 {
> - regulator-name = "vdda0v9_image";
> - regulator-always-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda_0v9: LDO_REG2 {
> - regulator-name = "vdda_0v9";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_pmu: LDO_REG3 {
> - regulator-name = "vdda0v9_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vccio_acodec: LDO_REG4 {
> - regulator-name = "vccio_acodec";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vccio_sd: LDO_REG5 {
> - regulator-name = "vccio_sd";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_pmu: LDO_REG6 {
> - regulator-name = "vcc3v3_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcca_1v8: LDO_REG7 {
> - regulator-name = "vcca_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcca1v8_pmu: LDO_REG8 {
> - regulator-name = "vcca1v8_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vcca1v8_image: LDO_REG9 {
> - regulator-name = "vcca1v8_image";
> - regulator-always-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_3v3: SWITCH_REG1 {
> - regulator-name = "vcc_3v3";
> - regulator-always-on;
> - regulator-boot-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_sd: SWITCH_REG2 {
> - regulator-name = "vcc3v3_sd";
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> - };
> - };
> -};
> -
> -&i2s0_8ch {
> - status = "okay";
> -};
> -
> -&i2s1_8ch {
> - rockchip,trcm-sync-tx-only;
> - status = "okay";
> -};
> -
> -&mdio0 {
> - rgmii_phy0: ethernet-phy at 0 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <0x0>;
> - reset-assert-us = <20000>;
> - reset-deassert-us = <100000>;
> - reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> - };
> -};
> -
> -&pcie30phy {
> - status = "okay";
> -};
> -
> -&pcie3x2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie_reset_pin>;
> - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_pcie>;
> - status = "okay";
> -};
> -
> -&pinctrl {
> - fspi {
> - fspi_dual_io_pins: fspi-dual-io-pins {
> - rockchip,pins =
> - /* fspi_clk */
> - <1 RK_PD0 1 &pcfg_pull_none>,
> - /* fspi_cs0n */
> - <1 RK_PD3 1 &pcfg_pull_none>,
> - /* fspi_d0 */
> - <1 RK_PD1 1 &pcfg_pull_none>,
> - /* fspi_d1 */
> - <1 RK_PD2 1 &pcfg_pull_none>;
> - };
> - };
> -
> - ir-receiver {
> - ir_receiver_pin: ir-receiver-pin {
> - /* external pullup to VCC3V3_SYS */
> - rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - leds {
> - led_power_pin: led-power-pin {
> - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - led_work_pin: led-work-pin {
> - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pcie {
> - pcie_reset_pin: pcie-reset-pin {
> - rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
> - rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pmic {
> - pmic_int_l: pmic-int-l {
> - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - rk809 {
> - hp_det_pin: hp-det-pin {
> - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - usb {
> - vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
> - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin {
> - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -&pmu_io_domains {
> - pmuio1-supply = <&vcc3v3_pmu>;
> - pmuio2-supply = <&vcc3v3_pmu>;
> - vccio1-supply = <&vccio_acodec>;
> - vccio2-supply = <&vcc_1v8>;
> - vccio3-supply = <&vccio_sd>;
> - vccio4-supply = <&vcc_1v8>;
> - vccio5-supply = <&vcc_3v3>;
> - vccio6-supply = <&vcc_3v3>;
> - vccio7-supply = <&vcc_3v3>;
> - status = "okay";
> -};
> -
> -&saradc {
> - vref-supply = <&vcca_1v8>;
> - status = "okay";
> -};
> -
> -&sata2 {
> - status = "okay";
> -};
> -
> -&sdhci {
> - bus-width = <8>;
> - max-frequency = <200000000>;
> - non-removable;
> - pinctrl-names = "default";
> - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
> - vmmc-supply = <&vcc_3v3>;
> - vqmmc-supply = <&vcc_1v8>;
> - status = "okay";
> -};
> -
> -&sdmmc0 {
> - bus-width = <4>;
> - cap-sd-highspeed;
> - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> - disable-wp;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> - sd-uhs-sdr50;
> - vmmc-supply = <&vcc3v3_sd>;
> - vqmmc-supply = <&vccio_sd>;
> - status = "okay";
> -};
> -
> -&sfc {
> - /* Dual I/O mode as the D2 pin conflicts with the eMMC */
> - pinctrl-0 = <&fspi_dual_io_pins>;
> - pinctrl-names = "default";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "okay";
> -
> - flash at 0 {
> - compatible = "jedec,spi-nor";
> - reg = <0>;
> - spi-max-frequency = <100000000>;
> - spi-rx-bus-width = <2>;
> - spi-tx-bus-width = <1>;
> -
> - partitions {
> - compatible = "fixed-partitions";
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - partition at 0 {
> - label = "SPL";
> - reg = <0x0 0xe0000>;
> - };
> - partition at e0000 {
> - label = "U-Boot Env";
> - reg = <0xe0000 0x20000>;
> - };
> - partition at 100000 {
> - label = "U-Boot";
> - reg = <0x100000 0x200000>;
> - };
> - partition at 300000 {
> - label = "splash";
> - reg = <0x300000 0x100000>;
> - };
> - partition at 400000 {
> - label = "Filesystem";
> - reg = <0x400000 0xc00000>;
> - };
> - };
> - };
> -};
> -
> -&tsadc {
> - rockchip,hw-tshut-mode = <1>;
> - rockchip,hw-tshut-polarity = <0>;
> - status = "okay";
> -};
> -
> -&uart2 {
> - status = "okay";
> -};
> -
> -&usb_host0_ehci {
> - status = "okay";
> -};
> -
> -&usb_host0_ohci {
> - status = "okay";
> -};
> -
> -&usb_host0_xhci {
> - dr_mode = "host";
> - status = "okay";
> -};
> -
> -&usb_host1_ehci {
> - status = "okay";
> -};
> -
> -&usb_host1_ohci {
> - status = "okay";
> -};
> -
> -&usb_host1_xhci {
> - status = "okay";
> -};
> -
> -&usb2phy0 {
> - status = "okay";
> -};
> -
> -&usb2phy0_host {
> - phy-supply = <&vcc5v0_usb_host>;
> - status = "okay";
> -};
> -
> -&usb2phy0_otg {
> - phy-supply = <&vcc5v0_usb_otg>;
> - status = "okay";
> -};
> -
> -&usb2phy1 {
> - status = "okay";
> -};
> -
> -&usb2phy1_host {
> - phy-supply = <&vcc5v0_usb_host>;
> - status = "okay";
> -};
> -
> -&usb2phy1_otg {
> - phy-supply = <&vcc5v0_usb_host>;
> - status = "okay";
> -};
> -
> -&vop {
> - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> - status = "okay";
> -};
> -
> -&vop_mmu {
> - status = "okay";
> -};
> -
> -&vp0 {
> - vp0_out_hdmi: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
> - reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> - remote-endpoint = <&hdmi_in_vp0>;
> - };
> -};
> diff --git a/arch/arm/dts/rk3568-pinctrl.dtsi b/arch/arm/dts/rk3568-pinctrl.dtsi
> deleted file mode 100644
> index 0a979bfb63d9..000000000000
> --- a/arch/arm/dts/rk3568-pinctrl.dtsi
> +++ /dev/null
> @@ -1,3214 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> - */
> -
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include "rockchip-pinconf.dtsi"
> -
> -/*
> - * This file is auto generated by pin2dts tool, please keep these code
> - * by adding changes at end of this file.
> - */
> -&pinctrl {
> - acodec {
> - /omit-if-no-ref/
> - acodec_pins: acodec-pins {
> - rockchip,pins =
> - /* acodec_adc_sync */
> - <1 RK_PB1 5 &pcfg_pull_none>,
> - /* acodec_adcclk */
> - <1 RK_PA1 5 &pcfg_pull_none>,
> - /* acodec_adcdata */
> - <1 RK_PA0 5 &pcfg_pull_none>,
> - /* acodec_dac_datal */
> - <1 RK_PA7 5 &pcfg_pull_none>,
> - /* acodec_dac_datar */
> - <1 RK_PB0 5 &pcfg_pull_none>,
> - /* acodec_dacclk */
> - <1 RK_PA3 5 &pcfg_pull_none>,
> - /* acodec_dacsync */
> - <1 RK_PA5 5 &pcfg_pull_none>;
> - };
> - };
> -
> - audiopwm {
> - /omit-if-no-ref/
> - audiopwm_lout: audiopwm-lout {
> - rockchip,pins =
> - /* audiopwm_lout */
> - <1 RK_PA0 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - audiopwm_loutn: audiopwm-loutn {
> - rockchip,pins =
> - /* audiopwm_loutn */
> - <1 RK_PA1 6 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - audiopwm_loutp: audiopwm-loutp {
> - rockchip,pins =
> - /* audiopwm_loutp */
> - <1 RK_PA0 6 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - audiopwm_rout: audiopwm-rout {
> - rockchip,pins =
> - /* audiopwm_rout */
> - <1 RK_PA1 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - audiopwm_routn: audiopwm-routn {
> - rockchip,pins =
> - /* audiopwm_routn */
> - <1 RK_PA7 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - audiopwm_routp: audiopwm-routp {
> - rockchip,pins =
> - /* audiopwm_routp */
> - <1 RK_PA6 4 &pcfg_pull_none>;
> - };
> - };
> -
> - bt656 {
> - /omit-if-no-ref/
> - bt656m0_pins: bt656m0-pins {
> - rockchip,pins =
> - /* bt656_clkm0 */
> - <3 RK_PA0 2 &pcfg_pull_none>,
> - /* bt656_d0m0 */
> - <2 RK_PD0 2 &pcfg_pull_none>,
> - /* bt656_d1m0 */
> - <2 RK_PD1 2 &pcfg_pull_none>,
> - /* bt656_d2m0 */
> - <2 RK_PD2 2 &pcfg_pull_none>,
> - /* bt656_d3m0 */
> - <2 RK_PD3 2 &pcfg_pull_none>,
> - /* bt656_d4m0 */
> - <2 RK_PD4 2 &pcfg_pull_none>,
> - /* bt656_d5m0 */
> - <2 RK_PD5 2 &pcfg_pull_none>,
> - /* bt656_d6m0 */
> - <2 RK_PD6 2 &pcfg_pull_none>,
> - /* bt656_d7m0 */
> - <2 RK_PD7 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - bt656m1_pins: bt656m1-pins {
> - rockchip,pins =
> - /* bt656_clkm1 */
> - <4 RK_PB4 5 &pcfg_pull_none>,
> - /* bt656_d0m1 */
> - <3 RK_PC6 5 &pcfg_pull_none>,
> - /* bt656_d1m1 */
> - <3 RK_PC7 5 &pcfg_pull_none>,
> - /* bt656_d2m1 */
> - <3 RK_PD0 5 &pcfg_pull_none>,
> - /* bt656_d3m1 */
> - <3 RK_PD1 5 &pcfg_pull_none>,
> - /* bt656_d4m1 */
> - <3 RK_PD2 5 &pcfg_pull_none>,
> - /* bt656_d5m1 */
> - <3 RK_PD3 5 &pcfg_pull_none>,
> - /* bt656_d6m1 */
> - <3 RK_PD4 5 &pcfg_pull_none>,
> - /* bt656_d7m1 */
> - <3 RK_PD5 5 &pcfg_pull_none>;
> - };
> - };
> -
> - bt1120 {
> - /omit-if-no-ref/
> - bt1120_pins: bt1120-pins {
> - rockchip,pins =
> - /* bt1120_clk */
> - <3 RK_PA6 2 &pcfg_pull_none>,
> - /* bt1120_d0 */
> - <3 RK_PA1 2 &pcfg_pull_none>,
> - /* bt1120_d1 */
> - <3 RK_PA2 2 &pcfg_pull_none>,
> - /* bt1120_d2 */
> - <3 RK_PA3 2 &pcfg_pull_none>,
> - /* bt1120_d3 */
> - <3 RK_PA4 2 &pcfg_pull_none>,
> - /* bt1120_d4 */
> - <3 RK_PA5 2 &pcfg_pull_none>,
> - /* bt1120_d5 */
> - <3 RK_PA7 2 &pcfg_pull_none>,
> - /* bt1120_d6 */
> - <3 RK_PB0 2 &pcfg_pull_none>,
> - /* bt1120_d7 */
> - <3 RK_PB1 2 &pcfg_pull_none>,
> - /* bt1120_d8 */
> - <3 RK_PB2 2 &pcfg_pull_none>,
> - /* bt1120_d9 */
> - <3 RK_PB3 2 &pcfg_pull_none>,
> - /* bt1120_d10 */
> - <3 RK_PB4 2 &pcfg_pull_none>,
> - /* bt1120_d11 */
> - <3 RK_PB5 2 &pcfg_pull_none>,
> - /* bt1120_d12 */
> - <3 RK_PB6 2 &pcfg_pull_none>,
> - /* bt1120_d13 */
> - <3 RK_PC1 2 &pcfg_pull_none>,
> - /* bt1120_d14 */
> - <3 RK_PC2 2 &pcfg_pull_none>,
> - /* bt1120_d15 */
> - <3 RK_PC3 2 &pcfg_pull_none>;
> - };
> - };
> -
> - cam {
> - /omit-if-no-ref/
> - cam_clkout0: cam-clkout0 {
> - rockchip,pins =
> - /* cam_clkout0 */
> - <4 RK_PA7 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - cam_clkout1: cam-clkout1 {
> - rockchip,pins =
> - /* cam_clkout1 */
> - <4 RK_PB0 1 &pcfg_pull_none>;
> - };
> - };
> -
> - can0 {
> - /omit-if-no-ref/
> - can0m0_pins: can0m0-pins {
> - rockchip,pins =
> - /* can0_rxm0 */
> - <0 RK_PB4 2 &pcfg_pull_none>,
> - /* can0_txm0 */
> - <0 RK_PB3 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - can0m1_pins: can0m1-pins {
> - rockchip,pins =
> - /* can0_rxm1 */
> - <2 RK_PA2 4 &pcfg_pull_none>,
> - /* can0_txm1 */
> - <2 RK_PA1 4 &pcfg_pull_none>;
> - };
> - };
> -
> - can1 {
> - /omit-if-no-ref/
> - can1m0_pins: can1m0-pins {
> - rockchip,pins =
> - /* can1_rxm0 */
> - <1 RK_PA0 3 &pcfg_pull_none>,
> - /* can1_txm0 */
> - <1 RK_PA1 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - can1m1_pins: can1m1-pins {
> - rockchip,pins =
> - /* can1_rxm1 */
> - <4 RK_PC2 3 &pcfg_pull_none>,
> - /* can1_txm1 */
> - <4 RK_PC3 3 &pcfg_pull_none>;
> - };
> - };
> -
> - can2 {
> - /omit-if-no-ref/
> - can2m0_pins: can2m0-pins {
> - rockchip,pins =
> - /* can2_rxm0 */
> - <4 RK_PB4 3 &pcfg_pull_none>,
> - /* can2_txm0 */
> - <4 RK_PB5 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - can2m1_pins: can2m1-pins {
> - rockchip,pins =
> - /* can2_rxm1 */
> - <2 RK_PB1 4 &pcfg_pull_none>,
> - /* can2_txm1 */
> - <2 RK_PB2 4 &pcfg_pull_none>;
> - };
> - };
> -
> - cif {
> - /omit-if-no-ref/
> - cif_clk: cif-clk {
> - rockchip,pins =
> - /* cif_clkout */
> - <4 RK_PC0 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - cif_dvp_clk: cif-dvp-clk {
> - rockchip,pins =
> - /* cif_clkin */
> - <4 RK_PC1 1 &pcfg_pull_none>,
> - /* cif_href */
> - <4 RK_PB6 1 &pcfg_pull_none>,
> - /* cif_vsync */
> - <4 RK_PB7 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - cif_dvp_bus16: cif-dvp-bus16 {
> - rockchip,pins =
> - /* cif_d8 */
> - <3 RK_PD6 1 &pcfg_pull_none>,
> - /* cif_d9 */
> - <3 RK_PD7 1 &pcfg_pull_none>,
> - /* cif_d10 */
> - <4 RK_PA0 1 &pcfg_pull_none>,
> - /* cif_d11 */
> - <4 RK_PA1 1 &pcfg_pull_none>,
> - /* cif_d12 */
> - <4 RK_PA2 1 &pcfg_pull_none>,
> - /* cif_d13 */
> - <4 RK_PA3 1 &pcfg_pull_none>,
> - /* cif_d14 */
> - <4 RK_PA4 1 &pcfg_pull_none>,
> - /* cif_d15 */
> - <4 RK_PA5 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - cif_dvp_bus8: cif-dvp-bus8 {
> - rockchip,pins =
> - /* cif_d0 */
> - <3 RK_PC6 1 &pcfg_pull_none>,
> - /* cif_d1 */
> - <3 RK_PC7 1 &pcfg_pull_none>,
> - /* cif_d2 */
> - <3 RK_PD0 1 &pcfg_pull_none>,
> - /* cif_d3 */
> - <3 RK_PD1 1 &pcfg_pull_none>,
> - /* cif_d4 */
> - <3 RK_PD2 1 &pcfg_pull_none>,
> - /* cif_d5 */
> - <3 RK_PD3 1 &pcfg_pull_none>,
> - /* cif_d6 */
> - <3 RK_PD4 1 &pcfg_pull_none>,
> - /* cif_d7 */
> - <3 RK_PD5 1 &pcfg_pull_none>;
> - };
> - };
> -
> - clk32k {
> - /omit-if-no-ref/
> - clk32k_in: clk32k-in {
> - rockchip,pins =
> - /* clk32k_in */
> - <0 RK_PB0 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - clk32k_out0: clk32k-out0 {
> - rockchip,pins =
> - /* clk32k_out0 */
> - <0 RK_PB0 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - clk32k_out1: clk32k-out1 {
> - rockchip,pins =
> - /* clk32k_out1 */
> - <2 RK_PC6 1 &pcfg_pull_none>;
> - };
> - };
> -
> - cpu {
> - /omit-if-no-ref/
> - cpu_pins: cpu-pins {
> - rockchip,pins =
> - /* cpu_avs */
> - <0 RK_PB7 2 &pcfg_pull_none>;
> - };
> - };
> -
> - ebc {
> - /omit-if-no-ref/
> - ebc_extern: ebc-extern {
> - rockchip,pins =
> - /* ebc_sdce1 */
> - <4 RK_PA7 2 &pcfg_pull_none>,
> - /* ebc_sdce2 */
> - <4 RK_PB0 2 &pcfg_pull_none>,
> - /* ebc_sdce3 */
> - <4 RK_PB1 2 &pcfg_pull_none>,
> - /* ebc_sdshr */
> - <4 RK_PB5 2 &pcfg_pull_none>,
> - /* ebc_vcom */
> - <4 RK_PB2 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - ebc_pins: ebc-pins {
> - rockchip,pins =
> - /* ebc_gdclk */
> - <4 RK_PC0 2 &pcfg_pull_none>,
> - /* ebc_gdoe */
> - <4 RK_PB3 2 &pcfg_pull_none>,
> - /* ebc_gdsp */
> - <4 RK_PB4 2 &pcfg_pull_none>,
> - /* ebc_sdce0 */
> - <4 RK_PA6 2 &pcfg_pull_none>,
> - /* ebc_sdclk */
> - <4 RK_PC1 2 &pcfg_pull_none>,
> - /* ebc_sddo0 */
> - <3 RK_PC6 2 &pcfg_pull_none>,
> - /* ebc_sddo1 */
> - <3 RK_PC7 2 &pcfg_pull_none>,
> - /* ebc_sddo2 */
> - <3 RK_PD0 2 &pcfg_pull_none>,
> - /* ebc_sddo3 */
> - <3 RK_PD1 2 &pcfg_pull_none>,
> - /* ebc_sddo4 */
> - <3 RK_PD2 2 &pcfg_pull_none>,
> - /* ebc_sddo5 */
> - <3 RK_PD3 2 &pcfg_pull_none>,
> - /* ebc_sddo6 */
> - <3 RK_PD4 2 &pcfg_pull_none>,
> - /* ebc_sddo7 */
> - <3 RK_PD5 2 &pcfg_pull_none>,
> - /* ebc_sddo8 */
> - <3 RK_PD6 2 &pcfg_pull_none>,
> - /* ebc_sddo9 */
> - <3 RK_PD7 2 &pcfg_pull_none>,
> - /* ebc_sddo10 */
> - <4 RK_PA0 2 &pcfg_pull_none>,
> - /* ebc_sddo11 */
> - <4 RK_PA1 2 &pcfg_pull_none>,
> - /* ebc_sddo12 */
> - <4 RK_PA2 2 &pcfg_pull_none>,
> - /* ebc_sddo13 */
> - <4 RK_PA3 2 &pcfg_pull_none>,
> - /* ebc_sddo14 */
> - <4 RK_PA4 2 &pcfg_pull_none>,
> - /* ebc_sddo15 */
> - <4 RK_PA5 2 &pcfg_pull_none>,
> - /* ebc_sdle */
> - <4 RK_PB6 2 &pcfg_pull_none>,
> - /* ebc_sdoe */
> - <4 RK_PB7 2 &pcfg_pull_none>;
> - };
> - };
> -
> - edpdp {
> - /omit-if-no-ref/
> - edpdpm0_pins: edpdpm0-pins {
> - rockchip,pins =
> - /* edpdp_hpdinm0 */
> - <4 RK_PC4 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - edpdpm1_pins: edpdpm1-pins {
> - rockchip,pins =
> - /* edpdp_hpdinm1 */
> - <0 RK_PC2 2 &pcfg_pull_none>;
> - };
> - };
> -
> - emmc {
> - /omit-if-no-ref/
> - emmc_rstnout: emmc-rstnout {
> - rockchip,pins =
> - /* emmc_rstn */
> - <1 RK_PC7 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - emmc_bus8: emmc-bus8 {
> - rockchip,pins =
> - /* emmc_d0 */
> - <1 RK_PB4 1 &pcfg_pull_up_drv_level_2>,
> - /* emmc_d1 */
> - <1 RK_PB5 1 &pcfg_pull_up_drv_level_2>,
> - /* emmc_d2 */
> - <1 RK_PB6 1 &pcfg_pull_up_drv_level_2>,
> - /* emmc_d3 */
> - <1 RK_PB7 1 &pcfg_pull_up_drv_level_2>,
> - /* emmc_d4 */
> - <1 RK_PC0 1 &pcfg_pull_up_drv_level_2>,
> - /* emmc_d5 */
> - <1 RK_PC1 1 &pcfg_pull_up_drv_level_2>,
> - /* emmc_d6 */
> - <1 RK_PC2 1 &pcfg_pull_up_drv_level_2>,
> - /* emmc_d7 */
> - <1 RK_PC3 1 &pcfg_pull_up_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - emmc_clk: emmc-clk {
> - rockchip,pins =
> - /* emmc_clkout */
> - <1 RK_PC5 1 &pcfg_pull_up_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - emmc_cmd: emmc-cmd {
> - rockchip,pins =
> - /* emmc_cmd */
> - <1 RK_PC4 1 &pcfg_pull_up_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - emmc_datastrobe: emmc-datastrobe {
> - rockchip,pins =
> - /* emmc_datastrobe */
> - <1 RK_PC6 1 &pcfg_pull_none>;
> - };
> - };
> -
> - eth0 {
> - /omit-if-no-ref/
> - eth0_pins: eth0-pins {
> - rockchip,pins =
> - /* eth0_refclko25m */
> - <2 RK_PC1 2 &pcfg_pull_none>;
> - };
> - };
> -
> - eth1 {
> - /omit-if-no-ref/
> - eth1m0_pins: eth1m0-pins {
> - rockchip,pins =
> - /* eth1_refclko25mm0 */
> - <3 RK_PB0 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - eth1m1_pins: eth1m1-pins {
> - rockchip,pins =
> - /* eth1_refclko25mm1 */
> - <4 RK_PB3 3 &pcfg_pull_none>;
> - };
> - };
> -
> - flash {
> - /omit-if-no-ref/
> - flash_pins: flash-pins {
> - rockchip,pins =
> - /* flash_ale */
> - <1 RK_PD0 2 &pcfg_pull_none>,
> - /* flash_cle */
> - <1 RK_PC6 3 &pcfg_pull_none>,
> - /* flash_cs0n */
> - <1 RK_PD3 2 &pcfg_pull_none>,
> - /* flash_cs1n */
> - <1 RK_PD4 2 &pcfg_pull_none>,
> - /* flash_d0 */
> - <1 RK_PB4 2 &pcfg_pull_none>,
> - /* flash_d1 */
> - <1 RK_PB5 2 &pcfg_pull_none>,
> - /* flash_d2 */
> - <1 RK_PB6 2 &pcfg_pull_none>,
> - /* flash_d3 */
> - <1 RK_PB7 2 &pcfg_pull_none>,
> - /* flash_d4 */
> - <1 RK_PC0 2 &pcfg_pull_none>,
> - /* flash_d5 */
> - <1 RK_PC1 2 &pcfg_pull_none>,
> - /* flash_d6 */
> - <1 RK_PC2 2 &pcfg_pull_none>,
> - /* flash_d7 */
> - <1 RK_PC3 2 &pcfg_pull_none>,
> - /* flash_dqs */
> - <1 RK_PC5 2 &pcfg_pull_none>,
> - /* flash_rdn */
> - <1 RK_PD2 2 &pcfg_pull_none>,
> - /* flash_rdy */
> - <1 RK_PD1 2 &pcfg_pull_none>,
> - /* flash_volsel */
> - <0 RK_PA7 1 &pcfg_pull_none>,
> - /* flash_wpn */
> - <1 RK_PC7 3 &pcfg_pull_none>,
> - /* flash_wrn */
> - <1 RK_PC4 2 &pcfg_pull_none>;
> - };
> - };
> -
> - fspi {
> - /omit-if-no-ref/
> - fspi_pins: fspi-pins {
> - rockchip,pins =
> - /* fspi_clk */
> - <1 RK_PD0 1 &pcfg_pull_none>,
> - /* fspi_cs0n */
> - <1 RK_PD3 1 &pcfg_pull_none>,
> - /* fspi_d0 */
> - <1 RK_PD1 1 &pcfg_pull_none>,
> - /* fspi_d1 */
> - <1 RK_PD2 1 &pcfg_pull_none>,
> - /* fspi_d2 */
> - <1 RK_PC7 2 &pcfg_pull_none>,
> - /* fspi_d3 */
> - <1 RK_PD4 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - fspi_cs1: fspi-cs1 {
> - rockchip,pins =
> - /* fspi_cs1n */
> - <1 RK_PC6 2 &pcfg_pull_up>;
> - };
> - };
> -
> - gmac0 {
> - /omit-if-no-ref/
> - gmac0_miim: gmac0-miim {
> - rockchip,pins =
> - /* gmac0_mdc */
> - <2 RK_PC3 2 &pcfg_pull_none>,
> - /* gmac0_mdio */
> - <2 RK_PC4 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac0_clkinout: gmac0-clkinout {
> - rockchip,pins =
> - /* gmac0_mclkinout */
> - <2 RK_PC2 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac0_rx_er: gmac0-rx-er {
> - rockchip,pins =
> - /* gmac0_rxer */
> - <2 RK_PC5 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac0_rx_bus2: gmac0-rx-bus2 {
> - rockchip,pins =
> - /* gmac0_rxd0 */
> - <2 RK_PB6 1 &pcfg_pull_none>,
> - /* gmac0_rxd1 */
> - <2 RK_PB7 2 &pcfg_pull_none>,
> - /* gmac0_rxdvcrs */
> - <2 RK_PC0 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac0_tx_bus2: gmac0-tx-bus2 {
> - rockchip,pins =
> - /* gmac0_txd0 */
> - <2 RK_PB3 1 &pcfg_pull_none_drv_level_2>,
> - /* gmac0_txd1 */
> - <2 RK_PB4 1 &pcfg_pull_none_drv_level_2>,
> - /* gmac0_txen */
> - <2 RK_PB5 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac0_rgmii_clk: gmac0-rgmii-clk {
> - rockchip,pins =
> - /* gmac0_rxclk */
> - <2 RK_PA5 2 &pcfg_pull_none>,
> - /* gmac0_txclk */
> - <2 RK_PB0 2 &pcfg_pull_none_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - gmac0_rgmii_bus: gmac0-rgmii-bus {
> - rockchip,pins =
> - /* gmac0_rxd2 */
> - <2 RK_PA3 2 &pcfg_pull_none>,
> - /* gmac0_rxd3 */
> - <2 RK_PA4 2 &pcfg_pull_none>,
> - /* gmac0_txd2 */
> - <2 RK_PA6 2 &pcfg_pull_none_drv_level_2>,
> - /* gmac0_txd3 */
> - <2 RK_PA7 2 &pcfg_pull_none_drv_level_2>;
> - };
> - };
> -
> - gmac1 {
> - /omit-if-no-ref/
> - gmac1m0_miim: gmac1m0-miim {
> - rockchip,pins =
> - /* gmac1_mdcm0 */
> - <3 RK_PC4 3 &pcfg_pull_none>,
> - /* gmac1_mdiom0 */
> - <3 RK_PC5 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m0_clkinout: gmac1m0-clkinout {
> - rockchip,pins =
> - /* gmac1_mclkinoutm0 */
> - <3 RK_PC0 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m0_rx_er: gmac1m0-rx-er {
> - rockchip,pins =
> - /* gmac1_rxerm0 */
> - <3 RK_PB4 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
> - rockchip,pins =
> - /* gmac1_rxd0m0 */
> - <3 RK_PB1 3 &pcfg_pull_none>,
> - /* gmac1_rxd1m0 */
> - <3 RK_PB2 3 &pcfg_pull_none>,
> - /* gmac1_rxdvcrsm0 */
> - <3 RK_PB3 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
> - rockchip,pins =
> - /* gmac1_txd0m0 */
> - <3 RK_PB5 3 &pcfg_pull_none_drv_level_2>,
> - /* gmac1_txd1m0 */
> - <3 RK_PB6 3 &pcfg_pull_none_drv_level_2>,
> - /* gmac1_txenm0 */
> - <3 RK_PB7 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
> - rockchip,pins =
> - /* gmac1_rxclkm0 */
> - <3 RK_PA7 3 &pcfg_pull_none>,
> - /* gmac1_txclkm0 */
> - <3 RK_PA6 3 &pcfg_pull_none_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
> - rockchip,pins =
> - /* gmac1_rxd2m0 */
> - <3 RK_PA4 3 &pcfg_pull_none>,
> - /* gmac1_rxd3m0 */
> - <3 RK_PA5 3 &pcfg_pull_none>,
> - /* gmac1_txd2m0 */
> - <3 RK_PA2 3 &pcfg_pull_none_drv_level_2>,
> - /* gmac1_txd3m0 */
> - <3 RK_PA3 3 &pcfg_pull_none_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m1_miim: gmac1m1-miim {
> - rockchip,pins =
> - /* gmac1_mdcm1 */
> - <4 RK_PB6 3 &pcfg_pull_none>,
> - /* gmac1_mdiom1 */
> - <4 RK_PB7 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m1_clkinout: gmac1m1-clkinout {
> - rockchip,pins =
> - /* gmac1_mclkinoutm1 */
> - <4 RK_PC1 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m1_rx_er: gmac1m1-rx-er {
> - rockchip,pins =
> - /* gmac1_rxerm1 */
> - <4 RK_PB2 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m1_rx_bus2: gmac1m1-rx-bus2 {
> - rockchip,pins =
> - /* gmac1_rxd0m1 */
> - <4 RK_PA7 3 &pcfg_pull_none>,
> - /* gmac1_rxd1m1 */
> - <4 RK_PB0 3 &pcfg_pull_none>,
> - /* gmac1_rxdvcrsm1 */
> - <4 RK_PB1 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m1_tx_bus2: gmac1m1-tx-bus2 {
> - rockchip,pins =
> - /* gmac1_txd0m1 */
> - <4 RK_PA4 3 &pcfg_pull_none_drv_level_2>,
> - /* gmac1_txd1m1 */
> - <4 RK_PA5 3 &pcfg_pull_none_drv_level_2>,
> - /* gmac1_txenm1 */
> - <4 RK_PA6 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m1_rgmii_clk: gmac1m1-rgmii-clk {
> - rockchip,pins =
> - /* gmac1_rxclkm1 */
> - <4 RK_PA3 3 &pcfg_pull_none>,
> - /* gmac1_txclkm1 */
> - <4 RK_PA0 3 &pcfg_pull_none_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m1_rgmii_bus: gmac1m1-rgmii-bus {
> - rockchip,pins =
> - /* gmac1_rxd2m1 */
> - <4 RK_PA1 3 &pcfg_pull_none>,
> - /* gmac1_rxd3m1 */
> - <4 RK_PA2 3 &pcfg_pull_none>,
> - /* gmac1_txd2m1 */
> - <3 RK_PD6 3 &pcfg_pull_none_drv_level_2>,
> - /* gmac1_txd3m1 */
> - <3 RK_PD7 3 &pcfg_pull_none_drv_level_2>;
> - };
> - };
> -
> - gpu {
> - /omit-if-no-ref/
> - gpu_pins: gpu-pins {
> - rockchip,pins =
> - /* gpu_avs */
> - <0 RK_PC0 2 &pcfg_pull_none>,
> - /* gpu_pwren */
> - <0 RK_PA6 4 &pcfg_pull_none>;
> - };
> - };
> -
> - hdmitx {
> - /omit-if-no-ref/
> - hdmitxm0_cec: hdmitxm0-cec {
> - rockchip,pins =
> - /* hdmitxm0_cec */
> - <4 RK_PD1 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - hdmitxm1_cec: hdmitxm1-cec {
> - rockchip,pins =
> - /* hdmitxm1_cec */
> - <0 RK_PC7 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - hdmitx_scl: hdmitx-scl {
> - rockchip,pins =
> - /* hdmitx_scl */
> - <4 RK_PC7 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - hdmitx_sda: hdmitx-sda {
> - rockchip,pins =
> - /* hdmitx_sda */
> - <4 RK_PD0 1 &pcfg_pull_none>;
> - };
> - };
> -
> - i2c0 {
> - /omit-if-no-ref/
> - i2c0_xfer: i2c0-xfer {
> - rockchip,pins =
> - /* i2c0_scl */
> - <0 RK_PB1 1 &pcfg_pull_none_smt>,
> - /* i2c0_sda */
> - <0 RK_PB2 1 &pcfg_pull_none_smt>;
> - };
> - };
> -
> - i2c1 {
> - /omit-if-no-ref/
> - i2c1_xfer: i2c1-xfer {
> - rockchip,pins =
> - /* i2c1_scl */
> - <0 RK_PB3 1 &pcfg_pull_none_smt>,
> - /* i2c1_sda */
> - <0 RK_PB4 1 &pcfg_pull_none_smt>;
> - };
> - };
> -
> - i2c2 {
> - /omit-if-no-ref/
> - i2c2m0_xfer: i2c2m0-xfer {
> - rockchip,pins =
> - /* i2c2_sclm0 */
> - <0 RK_PB5 1 &pcfg_pull_none_smt>,
> - /* i2c2_sdam0 */
> - <0 RK_PB6 1 &pcfg_pull_none_smt>;
> - };
> -
> - /omit-if-no-ref/
> - i2c2m1_xfer: i2c2m1-xfer {
> - rockchip,pins =
> - /* i2c2_sclm1 */
> - <4 RK_PB5 1 &pcfg_pull_none_smt>,
> - /* i2c2_sdam1 */
> - <4 RK_PB4 1 &pcfg_pull_none_smt>;
> - };
> - };
> -
> - i2c3 {
> - /omit-if-no-ref/
> - i2c3m0_xfer: i2c3m0-xfer {
> - rockchip,pins =
> - /* i2c3_sclm0 */
> - <1 RK_PA1 1 &pcfg_pull_none_smt>,
> - /* i2c3_sdam0 */
> - <1 RK_PA0 1 &pcfg_pull_none_smt>;
> - };
> -
> - /omit-if-no-ref/
> - i2c3m1_xfer: i2c3m1-xfer {
> - rockchip,pins =
> - /* i2c3_sclm1 */
> - <3 RK_PB5 4 &pcfg_pull_none_smt>,
> - /* i2c3_sdam1 */
> - <3 RK_PB6 4 &pcfg_pull_none_smt>;
> - };
> - };
> -
> - i2c4 {
> - /omit-if-no-ref/
> - i2c4m0_xfer: i2c4m0-xfer {
> - rockchip,pins =
> - /* i2c4_sclm0 */
> - <4 RK_PB3 1 &pcfg_pull_none_smt>,
> - /* i2c4_sdam0 */
> - <4 RK_PB2 1 &pcfg_pull_none_smt>;
> - };
> -
> - /omit-if-no-ref/
> - i2c4m1_xfer: i2c4m1-xfer {
> - rockchip,pins =
> - /* i2c4_sclm1 */
> - <2 RK_PB2 2 &pcfg_pull_none_smt>,
> - /* i2c4_sdam1 */
> - <2 RK_PB1 2 &pcfg_pull_none_smt>;
> - };
> - };
> -
> - i2c5 {
> - /omit-if-no-ref/
> - i2c5m0_xfer: i2c5m0-xfer {
> - rockchip,pins =
> - /* i2c5_sclm0 */
> - <3 RK_PB3 4 &pcfg_pull_none_smt>,
> - /* i2c5_sdam0 */
> - <3 RK_PB4 4 &pcfg_pull_none_smt>;
> - };
> -
> - /omit-if-no-ref/
> - i2c5m1_xfer: i2c5m1-xfer {
> - rockchip,pins =
> - /* i2c5_sclm1 */
> - <4 RK_PC7 2 &pcfg_pull_none_smt>,
> - /* i2c5_sdam1 */
> - <4 RK_PD0 2 &pcfg_pull_none_smt>;
> - };
> - };
> -
> - i2s1 {
> - /omit-if-no-ref/
> - i2s1m0_lrckrx: i2s1m0-lrckrx {
> - rockchip,pins =
> - /* i2s1m0_lrckrx */
> - <1 RK_PA6 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m0_lrcktx: i2s1m0-lrcktx {
> - rockchip,pins =
> - /* i2s1m0_lrcktx */
> - <1 RK_PA5 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m0_mclk: i2s1m0-mclk {
> - rockchip,pins =
> - /* i2s1m0_mclk */
> - <1 RK_PA2 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m0_sclkrx: i2s1m0-sclkrx {
> - rockchip,pins =
> - /* i2s1m0_sclkrx */
> - <1 RK_PA4 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m0_sclktx: i2s1m0-sclktx {
> - rockchip,pins =
> - /* i2s1m0_sclktx */
> - <1 RK_PA3 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m0_sdi0: i2s1m0-sdi0 {
> - rockchip,pins =
> - /* i2s1m0_sdi0 */
> - <1 RK_PB3 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m0_sdi1: i2s1m0-sdi1 {
> - rockchip,pins =
> - /* i2s1m0_sdi1 */
> - <1 RK_PB2 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m0_sdi2: i2s1m0-sdi2 {
> - rockchip,pins =
> - /* i2s1m0_sdi2 */
> - <1 RK_PB1 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m0_sdi3: i2s1m0-sdi3 {
> - rockchip,pins =
> - /* i2s1m0_sdi3 */
> - <1 RK_PB0 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m0_sdo0: i2s1m0-sdo0 {
> - rockchip,pins =
> - /* i2s1m0_sdo0 */
> - <1 RK_PA7 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m0_sdo1: i2s1m0-sdo1 {
> - rockchip,pins =
> - /* i2s1m0_sdo1 */
> - <1 RK_PB0 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m0_sdo2: i2s1m0-sdo2 {
> - rockchip,pins =
> - /* i2s1m0_sdo2 */
> - <1 RK_PB1 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m0_sdo3: i2s1m0-sdo3 {
> - rockchip,pins =
> - /* i2s1m0_sdo3 */
> - <1 RK_PB2 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m1_lrckrx: i2s1m1-lrckrx {
> - rockchip,pins =
> - /* i2s1m1_lrckrx */
> - <4 RK_PA7 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m1_lrcktx: i2s1m1-lrcktx {
> - rockchip,pins =
> - /* i2s1m1_lrcktx */
> - <3 RK_PD0 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m1_mclk: i2s1m1-mclk {
> - rockchip,pins =
> - /* i2s1m1_mclk */
> - <3 RK_PC6 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m1_sclkrx: i2s1m1-sclkrx {
> - rockchip,pins =
> - /* i2s1m1_sclkrx */
> - <4 RK_PA6 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m1_sclktx: i2s1m1-sclktx {
> - rockchip,pins =
> - /* i2s1m1_sclktx */
> - <3 RK_PC7 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m1_sdi0: i2s1m1-sdi0 {
> - rockchip,pins =
> - /* i2s1m1_sdi0 */
> - <3 RK_PD2 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m1_sdi1: i2s1m1-sdi1 {
> - rockchip,pins =
> - /* i2s1m1_sdi1 */
> - <3 RK_PD3 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m1_sdi2: i2s1m1-sdi2 {
> - rockchip,pins =
> - /* i2s1m1_sdi2 */
> - <3 RK_PD4 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m1_sdi3: i2s1m1-sdi3 {
> - rockchip,pins =
> - /* i2s1m1_sdi3 */
> - <3 RK_PD5 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m1_sdo0: i2s1m1-sdo0 {
> - rockchip,pins =
> - /* i2s1m1_sdo0 */
> - <3 RK_PD1 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m1_sdo1: i2s1m1-sdo1 {
> - rockchip,pins =
> - /* i2s1m1_sdo1 */
> - <4 RK_PB0 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m1_sdo2: i2s1m1-sdo2 {
> - rockchip,pins =
> - /* i2s1m1_sdo2 */
> - <4 RK_PB1 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m1_sdo3: i2s1m1-sdo3 {
> - rockchip,pins =
> - /* i2s1m1_sdo3 */
> - <4 RK_PB5 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m2_lrckrx: i2s1m2-lrckrx {
> - rockchip,pins =
> - /* i2s1m2_lrckrx */
> - <3 RK_PC5 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m2_lrcktx: i2s1m2-lrcktx {
> - rockchip,pins =
> - /* i2s1m2_lrcktx */
> - <2 RK_PD2 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m2_mclk: i2s1m2-mclk {
> - rockchip,pins =
> - /* i2s1m2_mclk */
> - <2 RK_PD0 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m2_sclkrx: i2s1m2-sclkrx {
> - rockchip,pins =
> - /* i2s1m2_sclkrx */
> - <3 RK_PC3 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m2_sclktx: i2s1m2-sclktx {
> - rockchip,pins =
> - /* i2s1m2_sclktx */
> - <2 RK_PD1 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m2_sdi0: i2s1m2-sdi0 {
> - rockchip,pins =
> - /* i2s1m2_sdi0 */
> - <2 RK_PD3 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m2_sdi1: i2s1m2-sdi1 {
> - rockchip,pins =
> - /* i2s1m2_sdi1 */
> - <2 RK_PD4 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m2_sdi2: i2s1m2-sdi2 {
> - rockchip,pins =
> - /* i2s1m2_sdi2 */
> - <2 RK_PD5 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m2_sdi3: i2s1m2-sdi3 {
> - rockchip,pins =
> - /* i2s1m2_sdi3 */
> - <2 RK_PD6 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m2_sdo0: i2s1m2-sdo0 {
> - rockchip,pins =
> - /* i2s1m2_sdo0 */
> - <2 RK_PD7 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m2_sdo1: i2s1m2-sdo1 {
> - rockchip,pins =
> - /* i2s1m2_sdo1 */
> - <3 RK_PA0 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m2_sdo2: i2s1m2-sdo2 {
> - rockchip,pins =
> - /* i2s1m2_sdo2 */
> - <3 RK_PC1 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s1m2_sdo3: i2s1m2-sdo3 {
> - rockchip,pins =
> - /* i2s1m2_sdo3 */
> - <3 RK_PC2 5 &pcfg_pull_none>;
> - };
> - };
> -
> - i2s2 {
> - /omit-if-no-ref/
> - i2s2m0_lrckrx: i2s2m0-lrckrx {
> - rockchip,pins =
> - /* i2s2m0_lrckrx */
> - <2 RK_PC0 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s2m0_lrcktx: i2s2m0-lrcktx {
> - rockchip,pins =
> - /* i2s2m0_lrcktx */
> - <2 RK_PC3 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s2m0_mclk: i2s2m0-mclk {
> - rockchip,pins =
> - /* i2s2m0_mclk */
> - <2 RK_PC1 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s2m0_sclkrx: i2s2m0-sclkrx {
> - rockchip,pins =
> - /* i2s2m0_sclkrx */
> - <2 RK_PB7 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s2m0_sclktx: i2s2m0-sclktx {
> - rockchip,pins =
> - /* i2s2m0_sclktx */
> - <2 RK_PC2 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s2m0_sdi: i2s2m0-sdi {
> - rockchip,pins =
> - /* i2s2m0_sdi */
> - <2 RK_PC5 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s2m0_sdo: i2s2m0-sdo {
> - rockchip,pins =
> - /* i2s2m0_sdo */
> - <2 RK_PC4 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s2m1_lrckrx: i2s2m1-lrckrx {
> - rockchip,pins =
> - /* i2s2m1_lrckrx */
> - <4 RK_PA5 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s2m1_lrcktx: i2s2m1-lrcktx {
> - rockchip,pins =
> - /* i2s2m1_lrcktx */
> - <4 RK_PA4 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s2m1_mclk: i2s2m1-mclk {
> - rockchip,pins =
> - /* i2s2m1_mclk */
> - <4 RK_PB6 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s2m1_sclkrx: i2s2m1-sclkrx {
> - rockchip,pins =
> - /* i2s2m1_sclkrx */
> - <4 RK_PC1 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s2m1_sclktx: i2s2m1-sclktx {
> - rockchip,pins =
> - /* i2s2m1_sclktx */
> - <4 RK_PB7 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s2m1_sdi: i2s2m1-sdi {
> - rockchip,pins =
> - /* i2s2m1_sdi */
> - <4 RK_PB2 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s2m1_sdo: i2s2m1-sdo {
> - rockchip,pins =
> - /* i2s2m1_sdo */
> - <4 RK_PB3 5 &pcfg_pull_none>;
> - };
> - };
> -
> - i2s3 {
> - /omit-if-no-ref/
> - i2s3m0_lrck: i2s3m0-lrck {
> - rockchip,pins =
> - /* i2s3m0_lrck */
> - <3 RK_PA4 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s3m0_mclk: i2s3m0-mclk {
> - rockchip,pins =
> - /* i2s3m0_mclk */
> - <3 RK_PA2 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s3m0_sclk: i2s3m0-sclk {
> - rockchip,pins =
> - /* i2s3m0_sclk */
> - <3 RK_PA3 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s3m0_sdi: i2s3m0-sdi {
> - rockchip,pins =
> - /* i2s3m0_sdi */
> - <3 RK_PA6 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s3m0_sdo: i2s3m0-sdo {
> - rockchip,pins =
> - /* i2s3m0_sdo */
> - <3 RK_PA5 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s3m1_lrck: i2s3m1-lrck {
> - rockchip,pins =
> - /* i2s3m1_lrck */
> - <4 RK_PC4 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s3m1_mclk: i2s3m1-mclk {
> - rockchip,pins =
> - /* i2s3m1_mclk */
> - <4 RK_PC2 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s3m1_sclk: i2s3m1-sclk {
> - rockchip,pins =
> - /* i2s3m1_sclk */
> - <4 RK_PC3 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s3m1_sdi: i2s3m1-sdi {
> - rockchip,pins =
> - /* i2s3m1_sdi */
> - <4 RK_PC6 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - i2s3m1_sdo: i2s3m1-sdo {
> - rockchip,pins =
> - /* i2s3m1_sdo */
> - <4 RK_PC5 5 &pcfg_pull_none>;
> - };
> - };
> -
> - isp {
> - /omit-if-no-ref/
> - isp_pins: isp-pins {
> - rockchip,pins =
> - /* isp_flashtrigin */
> - <4 RK_PB4 4 &pcfg_pull_none>,
> - /* isp_flashtrigout */
> - <4 RK_PA6 1 &pcfg_pull_none>,
> - /* isp_prelighttrig */
> - <4 RK_PB1 1 &pcfg_pull_none>;
> - };
> - };
> -
> - jtag {
> - /omit-if-no-ref/
> - jtag_pins: jtag-pins {
> - rockchip,pins =
> - /* jtag_tck */
> - <1 RK_PD7 2 &pcfg_pull_none>,
> - /* jtag_tms */
> - <2 RK_PA0 2 &pcfg_pull_none>;
> - };
> - };
> -
> - lcdc {
> - /omit-if-no-ref/
> - lcdc_ctl: lcdc-ctl {
> - rockchip,pins =
> - /* lcdc_clk */
> - <3 RK_PA0 1 &pcfg_pull_none>,
> - /* lcdc_d0 */
> - <2 RK_PD0 1 &pcfg_pull_none>,
> - /* lcdc_d1 */
> - <2 RK_PD1 1 &pcfg_pull_none>,
> - /* lcdc_d2 */
> - <2 RK_PD2 1 &pcfg_pull_none>,
> - /* lcdc_d3 */
> - <2 RK_PD3 1 &pcfg_pull_none>,
> - /* lcdc_d4 */
> - <2 RK_PD4 1 &pcfg_pull_none>,
> - /* lcdc_d5 */
> - <2 RK_PD5 1 &pcfg_pull_none>,
> - /* lcdc_d6 */
> - <2 RK_PD6 1 &pcfg_pull_none>,
> - /* lcdc_d7 */
> - <2 RK_PD7 1 &pcfg_pull_none>,
> - /* lcdc_d8 */
> - <3 RK_PA1 1 &pcfg_pull_none>,
> - /* lcdc_d9 */
> - <3 RK_PA2 1 &pcfg_pull_none>,
> - /* lcdc_d10 */
> - <3 RK_PA3 1 &pcfg_pull_none>,
> - /* lcdc_d11 */
> - <3 RK_PA4 1 &pcfg_pull_none>,
> - /* lcdc_d12 */
> - <3 RK_PA5 1 &pcfg_pull_none>,
> - /* lcdc_d13 */
> - <3 RK_PA6 1 &pcfg_pull_none>,
> - /* lcdc_d14 */
> - <3 RK_PA7 1 &pcfg_pull_none>,
> - /* lcdc_d15 */
> - <3 RK_PB0 1 &pcfg_pull_none>,
> - /* lcdc_d16 */
> - <3 RK_PB1 1 &pcfg_pull_none>,
> - /* lcdc_d17 */
> - <3 RK_PB2 1 &pcfg_pull_none>,
> - /* lcdc_d18 */
> - <3 RK_PB3 1 &pcfg_pull_none>,
> - /* lcdc_d19 */
> - <3 RK_PB4 1 &pcfg_pull_none>,
> - /* lcdc_d20 */
> - <3 RK_PB5 1 &pcfg_pull_none>,
> - /* lcdc_d21 */
> - <3 RK_PB6 1 &pcfg_pull_none>,
> - /* lcdc_d22 */
> - <3 RK_PB7 1 &pcfg_pull_none>,
> - /* lcdc_d23 */
> - <3 RK_PC0 1 &pcfg_pull_none>,
> - /* lcdc_den */
> - <3 RK_PC3 1 &pcfg_pull_none>,
> - /* lcdc_hsync */
> - <3 RK_PC1 1 &pcfg_pull_none>,
> - /* lcdc_vsync */
> - <3 RK_PC2 1 &pcfg_pull_none>;
> - };
> - };
> -
> - mcu {
> - /omit-if-no-ref/
> - mcu_pins: mcu-pins {
> - rockchip,pins =
> - /* mcu_jtagtck */
> - <0 RK_PB4 4 &pcfg_pull_none>,
> - /* mcu_jtagtdi */
> - <0 RK_PC1 4 &pcfg_pull_none>,
> - /* mcu_jtagtdo */
> - <0 RK_PB3 4 &pcfg_pull_none>,
> - /* mcu_jtagtms */
> - <0 RK_PC2 4 &pcfg_pull_none>,
> - /* mcu_jtagtrstn */
> - <0 RK_PC3 4 &pcfg_pull_none>;
> - };
> - };
> -
> - npu {
> - /omit-if-no-ref/
> - npu_pins: npu-pins {
> - rockchip,pins =
> - /* npu_avs */
> - <0 RK_PC1 2 &pcfg_pull_none>;
> - };
> - };
> -
> - pcie20 {
> - /omit-if-no-ref/
> - pcie20m0_pins: pcie20m0-pins {
> - rockchip,pins =
> - /* pcie20_clkreqnm0 */
> - <0 RK_PA5 3 &pcfg_pull_none>,
> - /* pcie20_perstnm0 */
> - <0 RK_PB6 3 &pcfg_pull_none>,
> - /* pcie20_wakenm0 */
> - <0 RK_PB5 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pcie20m1_pins: pcie20m1-pins {
> - rockchip,pins =
> - /* pcie20_clkreqnm1 */
> - <2 RK_PD0 4 &pcfg_pull_none>,
> - /* pcie20_perstnm1 */
> - <3 RK_PC1 4 &pcfg_pull_none>,
> - /* pcie20_wakenm1 */
> - <2 RK_PD1 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pcie20m2_pins: pcie20m2-pins {
> - rockchip,pins =
> - /* pcie20_clkreqnm2 */
> - <1 RK_PB0 4 &pcfg_pull_none>,
> - /* pcie20_perstnm2 */
> - <1 RK_PB2 4 &pcfg_pull_none>,
> - /* pcie20_wakenm2 */
> - <1 RK_PB1 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pcie20_buttonrstn: pcie20-buttonrstn {
> - rockchip,pins =
> - /* pcie20_buttonrstn */
> - <0 RK_PB4 3 &pcfg_pull_none>;
> - };
> - };
> -
> - pcie30x1 {
> - /omit-if-no-ref/
> - pcie30x1m0_pins: pcie30x1m0-pins {
> - rockchip,pins =
> - /* pcie30x1_clkreqnm0 */
> - <0 RK_PA4 3 &pcfg_pull_none>,
> - /* pcie30x1_perstnm0 */
> - <0 RK_PC3 3 &pcfg_pull_none>,
> - /* pcie30x1_wakenm0 */
> - <0 RK_PC2 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pcie30x1m1_pins: pcie30x1m1-pins {
> - rockchip,pins =
> - /* pcie30x1_clkreqnm1 */
> - <2 RK_PD2 4 &pcfg_pull_none>,
> - /* pcie30x1_perstnm1 */
> - <3 RK_PA1 4 &pcfg_pull_none>,
> - /* pcie30x1_wakenm1 */
> - <2 RK_PD3 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pcie30x1m2_pins: pcie30x1m2-pins {
> - rockchip,pins =
> - /* pcie30x1_clkreqnm2 */
> - <1 RK_PA5 4 &pcfg_pull_none>,
> - /* pcie30x1_perstnm2 */
> - <1 RK_PA2 4 &pcfg_pull_none>,
> - /* pcie30x1_wakenm2 */
> - <1 RK_PA3 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pcie30x1_buttonrstn: pcie30x1-buttonrstn {
> - rockchip,pins =
> - /* pcie30x1_buttonrstn */
> - <0 RK_PB3 3 &pcfg_pull_none>;
> - };
> - };
> -
> - pcie30x2 {
> - /omit-if-no-ref/
> - pcie30x2m0_pins: pcie30x2m0-pins {
> - rockchip,pins =
> - /* pcie30x2_clkreqnm0 */
> - <0 RK_PA6 2 &pcfg_pull_none>,
> - /* pcie30x2_perstnm0 */
> - <0 RK_PC6 3 &pcfg_pull_none>,
> - /* pcie30x2_wakenm0 */
> - <0 RK_PC5 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pcie30x2m1_pins: pcie30x2m1-pins {
> - rockchip,pins =
> - /* pcie30x2_clkreqnm1 */
> - <2 RK_PD4 4 &pcfg_pull_none>,
> - /* pcie30x2_perstnm1 */
> - <2 RK_PD6 4 &pcfg_pull_none>,
> - /* pcie30x2_wakenm1 */
> - <2 RK_PD5 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pcie30x2m2_pins: pcie30x2m2-pins {
> - rockchip,pins =
> - /* pcie30x2_clkreqnm2 */
> - <4 RK_PC2 4 &pcfg_pull_none>,
> - /* pcie30x2_perstnm2 */
> - <4 RK_PC4 4 &pcfg_pull_none>,
> - /* pcie30x2_wakenm2 */
> - <4 RK_PC3 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pcie30x2_buttonrstn: pcie30x2-buttonrstn {
> - rockchip,pins =
> - /* pcie30x2_buttonrstn */
> - <0 RK_PB0 3 &pcfg_pull_none>;
> - };
> - };
> -
> - pdm {
> - /omit-if-no-ref/
> - pdmm0_clk: pdmm0-clk {
> - rockchip,pins =
> - /* pdm_clk0m0 */
> - <1 RK_PA6 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm0_clk1: pdmm0-clk1 {
> - rockchip,pins =
> - /* pdmm0_clk1 */
> - <1 RK_PA4 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm0_sdi0: pdmm0-sdi0 {
> - rockchip,pins =
> - /* pdmm0_sdi0 */
> - <1 RK_PB3 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm0_sdi1: pdmm0-sdi1 {
> - rockchip,pins =
> - /* pdmm0_sdi1 */
> - <1 RK_PB2 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm0_sdi2: pdmm0-sdi2 {
> - rockchip,pins =
> - /* pdmm0_sdi2 */
> - <1 RK_PB1 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm0_sdi3: pdmm0-sdi3 {
> - rockchip,pins =
> - /* pdmm0_sdi3 */
> - <1 RK_PB0 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm1_clk: pdmm1-clk {
> - rockchip,pins =
> - /* pdm_clk0m1 */
> - <3 RK_PD6 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm1_clk1: pdmm1-clk1 {
> - rockchip,pins =
> - /* pdmm1_clk1 */
> - <4 RK_PA0 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm1_sdi0: pdmm1-sdi0 {
> - rockchip,pins =
> - /* pdmm1_sdi0 */
> - <3 RK_PD7 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm1_sdi1: pdmm1-sdi1 {
> - rockchip,pins =
> - /* pdmm1_sdi1 */
> - <4 RK_PA1 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm1_sdi2: pdmm1-sdi2 {
> - rockchip,pins =
> - /* pdmm1_sdi2 */
> - <4 RK_PA2 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm1_sdi3: pdmm1-sdi3 {
> - rockchip,pins =
> - /* pdmm1_sdi3 */
> - <4 RK_PA3 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm2_clk1: pdmm2-clk1 {
> - rockchip,pins =
> - /* pdmm2_clk1 */
> - <3 RK_PC4 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm2_sdi0: pdmm2-sdi0 {
> - rockchip,pins =
> - /* pdmm2_sdi0 */
> - <3 RK_PB3 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm2_sdi1: pdmm2-sdi1 {
> - rockchip,pins =
> - /* pdmm2_sdi1 */
> - <3 RK_PB4 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm2_sdi2: pdmm2-sdi2 {
> - rockchip,pins =
> - /* pdmm2_sdi2 */
> - <3 RK_PB7 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pdmm2_sdi3: pdmm2-sdi3 {
> - rockchip,pins =
> - /* pdmm2_sdi3 */
> - <3 RK_PC0 5 &pcfg_pull_none>;
> - };
> - };
> -
> - pmic {
> - /omit-if-no-ref/
> - pmic_pins: pmic-pins {
> - rockchip,pins =
> - /* pmic_sleep */
> - <0 RK_PA2 1 &pcfg_pull_none>;
> - };
> - };
> -
> - pmu {
> - /omit-if-no-ref/
> - pmu_pins: pmu-pins {
> - rockchip,pins =
> - /* pmu_debug0 */
> - <0 RK_PA5 4 &pcfg_pull_none>,
> - /* pmu_debug1 */
> - <0 RK_PA6 3 &pcfg_pull_none>,
> - /* pmu_debug2 */
> - <0 RK_PC4 4 &pcfg_pull_none>,
> - /* pmu_debug3 */
> - <0 RK_PC5 4 &pcfg_pull_none>,
> - /* pmu_debug4 */
> - <0 RK_PC6 4 &pcfg_pull_none>,
> - /* pmu_debug5 */
> - <0 RK_PC7 4 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm0 {
> - /omit-if-no-ref/
> - pwm0m0_pins: pwm0m0-pins {
> - rockchip,pins =
> - /* pwm0_m0 */
> - <0 RK_PB7 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pwm0m1_pins: pwm0m1-pins {
> - rockchip,pins =
> - /* pwm0_m1 */
> - <0 RK_PC7 2 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm1 {
> - /omit-if-no-ref/
> - pwm1m0_pins: pwm1m0-pins {
> - rockchip,pins =
> - /* pwm1_m0 */
> - <0 RK_PC0 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pwm1m1_pins: pwm1m1-pins {
> - rockchip,pins =
> - /* pwm1_m1 */
> - <0 RK_PB5 4 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm2 {
> - /omit-if-no-ref/
> - pwm2m0_pins: pwm2m0-pins {
> - rockchip,pins =
> - /* pwm2_m0 */
> - <0 RK_PC1 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pwm2m1_pins: pwm2m1-pins {
> - rockchip,pins =
> - /* pwm2_m1 */
> - <0 RK_PB6 4 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm3 {
> - /omit-if-no-ref/
> - pwm3_pins: pwm3-pins {
> - rockchip,pins =
> - /* pwm3_ir */
> - <0 RK_PC2 1 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm4 {
> - /omit-if-no-ref/
> - pwm4_pins: pwm4-pins {
> - rockchip,pins =
> - /* pwm4 */
> - <0 RK_PC3 1 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm5 {
> - /omit-if-no-ref/
> - pwm5_pins: pwm5-pins {
> - rockchip,pins =
> - /* pwm5 */
> - <0 RK_PC4 1 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm6 {
> - /omit-if-no-ref/
> - pwm6_pins: pwm6-pins {
> - rockchip,pins =
> - /* pwm6 */
> - <0 RK_PC5 1 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm7 {
> - /omit-if-no-ref/
> - pwm7_pins: pwm7-pins {
> - rockchip,pins =
> - /* pwm7_ir */
> - <0 RK_PC6 1 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm8 {
> - /omit-if-no-ref/
> - pwm8m0_pins: pwm8m0-pins {
> - rockchip,pins =
> - /* pwm8_m0 */
> - <3 RK_PB1 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pwm8m1_pins: pwm8m1-pins {
> - rockchip,pins =
> - /* pwm8_m1 */
> - <1 RK_PD5 4 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm9 {
> - /omit-if-no-ref/
> - pwm9m0_pins: pwm9m0-pins {
> - rockchip,pins =
> - /* pwm9_m0 */
> - <3 RK_PB2 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pwm9m1_pins: pwm9m1-pins {
> - rockchip,pins =
> - /* pwm9_m1 */
> - <1 RK_PD6 4 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm10 {
> - /omit-if-no-ref/
> - pwm10m0_pins: pwm10m0-pins {
> - rockchip,pins =
> - /* pwm10_m0 */
> - <3 RK_PB5 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pwm10m1_pins: pwm10m1-pins {
> - rockchip,pins =
> - /* pwm10_m1 */
> - <2 RK_PA1 2 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm11 {
> - /omit-if-no-ref/
> - pwm11m0_pins: pwm11m0-pins {
> - rockchip,pins =
> - /* pwm11_irm0 */
> - <3 RK_PB6 5 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pwm11m1_pins: pwm11m1-pins {
> - rockchip,pins =
> - /* pwm11_irm1 */
> - <4 RK_PC0 3 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm12 {
> - /omit-if-no-ref/
> - pwm12m0_pins: pwm12m0-pins {
> - rockchip,pins =
> - /* pwm12_m0 */
> - <3 RK_PB7 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pwm12m1_pins: pwm12m1-pins {
> - rockchip,pins =
> - /* pwm12_m1 */
> - <4 RK_PC5 1 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm13 {
> - /omit-if-no-ref/
> - pwm13m0_pins: pwm13m0-pins {
> - rockchip,pins =
> - /* pwm13_m0 */
> - <3 RK_PC0 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pwm13m1_pins: pwm13m1-pins {
> - rockchip,pins =
> - /* pwm13_m1 */
> - <4 RK_PC6 1 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm14 {
> - /omit-if-no-ref/
> - pwm14m0_pins: pwm14m0-pins {
> - rockchip,pins =
> - /* pwm14_m0 */
> - <3 RK_PC4 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pwm14m1_pins: pwm14m1-pins {
> - rockchip,pins =
> - /* pwm14_m1 */
> - <4 RK_PC2 1 &pcfg_pull_none>;
> - };
> - };
> -
> - pwm15 {
> - /omit-if-no-ref/
> - pwm15m0_pins: pwm15m0-pins {
> - rockchip,pins =
> - /* pwm15_irm0 */
> - <3 RK_PC5 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - pwm15m1_pins: pwm15m1-pins {
> - rockchip,pins =
> - /* pwm15_irm1 */
> - <4 RK_PC3 1 &pcfg_pull_none>;
> - };
> - };
> -
> - refclk {
> - /omit-if-no-ref/
> - refclk_pins: refclk-pins {
> - rockchip,pins =
> - /* refclk_ou */
> - <0 RK_PA0 1 &pcfg_pull_none>;
> - };
> - };
> -
> - sata {
> - /omit-if-no-ref/
> - sata_pins: sata-pins {
> - rockchip,pins =
> - /* sata_cpdet */
> - <0 RK_PA4 2 &pcfg_pull_none>,
> - /* sata_cppod */
> - <0 RK_PA6 1 &pcfg_pull_none>,
> - /* sata_mpswitch */
> - <0 RK_PA5 2 &pcfg_pull_none>;
> - };
> - };
> -
> - sata0 {
> - /omit-if-no-ref/
> - sata0_pins: sata0-pins {
> - rockchip,pins =
> - /* sata0_actled */
> - <4 RK_PC6 3 &pcfg_pull_none>;
> - };
> - };
> -
> - sata1 {
> - /omit-if-no-ref/
> - sata1_pins: sata1-pins {
> - rockchip,pins =
> - /* sata1_actled */
> - <4 RK_PC5 3 &pcfg_pull_none>;
> - };
> - };
> -
> - sata2 {
> - /omit-if-no-ref/
> - sata2_pins: sata2-pins {
> - rockchip,pins =
> - /* sata2_actled */
> - <4 RK_PC4 3 &pcfg_pull_none>;
> - };
> - };
> -
> - scr {
> - /omit-if-no-ref/
> - scr_pins: scr-pins {
> - rockchip,pins =
> - /* scr_clk */
> - <1 RK_PA2 3 &pcfg_pull_none>,
> - /* scr_det */
> - <1 RK_PA7 3 &pcfg_pull_up>,
> - /* scr_io */
> - <1 RK_PA3 3 &pcfg_pull_up>,
> - /* scr_rst */
> - <1 RK_PA5 3 &pcfg_pull_none>;
> - };
> - };
> -
> - sdmmc0 {
> - /omit-if-no-ref/
> - sdmmc0_bus4: sdmmc0-bus4 {
> - rockchip,pins =
> - /* sdmmc0_d0 */
> - <1 RK_PD5 1 &pcfg_pull_up_drv_level_2>,
> - /* sdmmc0_d1 */
> - <1 RK_PD6 1 &pcfg_pull_up_drv_level_2>,
> - /* sdmmc0_d2 */
> - <1 RK_PD7 1 &pcfg_pull_up_drv_level_2>,
> - /* sdmmc0_d3 */
> - <2 RK_PA0 1 &pcfg_pull_up_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc0_clk: sdmmc0-clk {
> - rockchip,pins =
> - /* sdmmc0_clk */
> - <2 RK_PA2 1 &pcfg_pull_up_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc0_cmd: sdmmc0-cmd {
> - rockchip,pins =
> - /* sdmmc0_cmd */
> - <2 RK_PA1 1 &pcfg_pull_up_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc0_det: sdmmc0-det {
> - rockchip,pins =
> - /* sdmmc0_det */
> - <0 RK_PA4 1 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc0_pwren: sdmmc0-pwren {
> - rockchip,pins =
> - /* sdmmc0_pwren */
> - <0 RK_PA5 1 &pcfg_pull_none>;
> - };
> - };
> -
> - sdmmc1 {
> - /omit-if-no-ref/
> - sdmmc1_bus4: sdmmc1-bus4 {
> - rockchip,pins =
> - /* sdmmc1_d0 */
> - <2 RK_PA3 1 &pcfg_pull_up_drv_level_2>,
> - /* sdmmc1_d1 */
> - <2 RK_PA4 1 &pcfg_pull_up_drv_level_2>,
> - /* sdmmc1_d2 */
> - <2 RK_PA5 1 &pcfg_pull_up_drv_level_2>,
> - /* sdmmc1_d3 */
> - <2 RK_PA6 1 &pcfg_pull_up_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc1_clk: sdmmc1-clk {
> - rockchip,pins =
> - /* sdmmc1_clk */
> - <2 RK_PB0 1 &pcfg_pull_up_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc1_cmd: sdmmc1-cmd {
> - rockchip,pins =
> - /* sdmmc1_cmd */
> - <2 RK_PA7 1 &pcfg_pull_up_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc1_det: sdmmc1-det {
> - rockchip,pins =
> - /* sdmmc1_det */
> - <2 RK_PB2 1 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc1_pwren: sdmmc1-pwren {
> - rockchip,pins =
> - /* sdmmc1_pwren */
> - <2 RK_PB1 1 &pcfg_pull_none>;
> - };
> - };
> -
> - sdmmc2 {
> - /omit-if-no-ref/
> - sdmmc2m0_bus4: sdmmc2m0-bus4 {
> - rockchip,pins =
> - /* sdmmc2_d0m0 */
> - <3 RK_PC6 3 &pcfg_pull_up_drv_level_2>,
> - /* sdmmc2_d1m0 */
> - <3 RK_PC7 3 &pcfg_pull_up_drv_level_2>,
> - /* sdmmc2_d2m0 */
> - <3 RK_PD0 3 &pcfg_pull_up_drv_level_2>,
> - /* sdmmc2_d3m0 */
> - <3 RK_PD1 3 &pcfg_pull_up_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc2m0_clk: sdmmc2m0-clk {
> - rockchip,pins =
> - /* sdmmc2_clkm0 */
> - <3 RK_PD3 3 &pcfg_pull_up_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc2m0_cmd: sdmmc2m0-cmd {
> - rockchip,pins =
> - /* sdmmc2_cmdm0 */
> - <3 RK_PD2 3 &pcfg_pull_up_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc2m0_det: sdmmc2m0-det {
> - rockchip,pins =
> - /* sdmmc2_detm0 */
> - <3 RK_PD4 3 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc2m0_pwren: sdmmc2m0-pwren {
> - rockchip,pins =
> - /* sdmmc2m0_pwren */
> - <3 RK_PD5 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc2m1_bus4: sdmmc2m1-bus4 {
> - rockchip,pins =
> - /* sdmmc2_d0m1 */
> - <3 RK_PA1 5 &pcfg_pull_up_drv_level_2>,
> - /* sdmmc2_d1m1 */
> - <3 RK_PA2 5 &pcfg_pull_up_drv_level_2>,
> - /* sdmmc2_d2m1 */
> - <3 RK_PA3 5 &pcfg_pull_up_drv_level_2>,
> - /* sdmmc2_d3m1 */
> - <3 RK_PA4 5 &pcfg_pull_up_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc2m1_clk: sdmmc2m1-clk {
> - rockchip,pins =
> - /* sdmmc2_clkm1 */
> - <3 RK_PA6 5 &pcfg_pull_up_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc2m1_cmd: sdmmc2m1-cmd {
> - rockchip,pins =
> - /* sdmmc2_cmdm1 */
> - <3 RK_PA5 5 &pcfg_pull_up_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc2m1_det: sdmmc2m1-det {
> - rockchip,pins =
> - /* sdmmc2_detm1 */
> - <3 RK_PA7 4 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - sdmmc2m1_pwren: sdmmc2m1-pwren {
> - rockchip,pins =
> - /* sdmmc2m1_pwren */
> - <3 RK_PB0 4 &pcfg_pull_none>;
> - };
> - };
> -
> - spdif {
> - /omit-if-no-ref/
> - spdifm0_tx: spdifm0-tx {
> - rockchip,pins =
> - /* spdifm0_tx */
> - <1 RK_PA4 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spdifm1_tx: spdifm1-tx {
> - rockchip,pins =
> - /* spdifm1_tx */
> - <3 RK_PC5 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spdifm2_tx: spdifm2-tx {
> - rockchip,pins =
> - /* spdifm2_tx */
> - <4 RK_PC4 2 &pcfg_pull_none>;
> - };
> - };
> -
> - spi0 {
> - /omit-if-no-ref/
> - spi0m0_pins: spi0m0-pins {
> - rockchip,pins =
> - /* spi0_clkm0 */
> - <0 RK_PB5 2 &pcfg_pull_none>,
> - /* spi0_misom0 */
> - <0 RK_PC5 2 &pcfg_pull_none>,
> - /* spi0_mosim0 */
> - <0 RK_PB6 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi0m0_cs0: spi0m0-cs0 {
> - rockchip,pins =
> - /* spi0_cs0m0 */
> - <0 RK_PC6 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi0m0_cs1: spi0m0-cs1 {
> - rockchip,pins =
> - /* spi0_cs1m0 */
> - <0 RK_PC4 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi0m1_pins: spi0m1-pins {
> - rockchip,pins =
> - /* spi0_clkm1 */
> - <2 RK_PD3 3 &pcfg_pull_none>,
> - /* spi0_misom1 */
> - <2 RK_PD0 3 &pcfg_pull_none>,
> - /* spi0_mosim1 */
> - <2 RK_PD1 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi0m1_cs0: spi0m1-cs0 {
> - rockchip,pins =
> - /* spi0_cs0m1 */
> - <2 RK_PD2 3 &pcfg_pull_none>;
> - };
> - };
> -
> - spi1 {
> - /omit-if-no-ref/
> - spi1m0_pins: spi1m0-pins {
> - rockchip,pins =
> - /* spi1_clkm0 */
> - <2 RK_PB5 3 &pcfg_pull_none>,
> - /* spi1_misom0 */
> - <2 RK_PB6 3 &pcfg_pull_none>,
> - /* spi1_mosim0 */
> - <2 RK_PB7 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi1m0_cs0: spi1m0-cs0 {
> - rockchip,pins =
> - /* spi1_cs0m0 */
> - <2 RK_PC0 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi1m0_cs1: spi1m0-cs1 {
> - rockchip,pins =
> - /* spi1_cs1m0 */
> - <2 RK_PC6 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi1m1_pins: spi1m1-pins {
> - rockchip,pins =
> - /* spi1_clkm1 */
> - <3 RK_PC3 3 &pcfg_pull_none>,
> - /* spi1_misom1 */
> - <3 RK_PC2 3 &pcfg_pull_none>,
> - /* spi1_mosim1 */
> - <3 RK_PC1 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi1m1_cs0: spi1m1-cs0 {
> - rockchip,pins =
> - /* spi1_cs0m1 */
> - <3 RK_PA1 3 &pcfg_pull_none>;
> - };
> - };
> -
> - spi2 {
> - /omit-if-no-ref/
> - spi2m0_pins: spi2m0-pins {
> - rockchip,pins =
> - /* spi2_clkm0 */
> - <2 RK_PC1 4 &pcfg_pull_none>,
> - /* spi2_misom0 */
> - <2 RK_PC2 4 &pcfg_pull_none>,
> - /* spi2_mosim0 */
> - <2 RK_PC3 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi2m0_cs0: spi2m0-cs0 {
> - rockchip,pins =
> - /* spi2_cs0m0 */
> - <2 RK_PC4 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi2m0_cs1: spi2m0-cs1 {
> - rockchip,pins =
> - /* spi2_cs1m0 */
> - <2 RK_PC5 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi2m1_pins: spi2m1-pins {
> - rockchip,pins =
> - /* spi2_clkm1 */
> - <3 RK_PA0 3 &pcfg_pull_none>,
> - /* spi2_misom1 */
> - <2 RK_PD7 3 &pcfg_pull_none>,
> - /* spi2_mosim1 */
> - <2 RK_PD6 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi2m1_cs0: spi2m1-cs0 {
> - rockchip,pins =
> - /* spi2_cs0m1 */
> - <2 RK_PD5 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi2m1_cs1: spi2m1-cs1 {
> - rockchip,pins =
> - /* spi2_cs1m1 */
> - <2 RK_PD4 3 &pcfg_pull_none>;
> - };
> - };
> -
> - spi3 {
> - /omit-if-no-ref/
> - spi3m0_pins: spi3m0-pins {
> - rockchip,pins =
> - /* spi3_clkm0 */
> - <4 RK_PB3 4 &pcfg_pull_none>,
> - /* spi3_misom0 */
> - <4 RK_PB0 4 &pcfg_pull_none>,
> - /* spi3_mosim0 */
> - <4 RK_PB2 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi3m0_cs0: spi3m0-cs0 {
> - rockchip,pins =
> - /* spi3_cs0m0 */
> - <4 RK_PA6 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi3m0_cs1: spi3m0-cs1 {
> - rockchip,pins =
> - /* spi3_cs1m0 */
> - <4 RK_PA7 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi3m1_pins: spi3m1-pins {
> - rockchip,pins =
> - /* spi3_clkm1 */
> - <4 RK_PC2 2 &pcfg_pull_none>,
> - /* spi3_misom1 */
> - <4 RK_PC5 2 &pcfg_pull_none>,
> - /* spi3_mosim1 */
> - <4 RK_PC3 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi3m1_cs0: spi3m1-cs0 {
> - rockchip,pins =
> - /* spi3_cs0m1 */
> - <4 RK_PC6 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - spi3m1_cs1: spi3m1-cs1 {
> - rockchip,pins =
> - /* spi3_cs1m1 */
> - <4 RK_PD1 2 &pcfg_pull_none>;
> - };
> - };
> -
> - tsadc {
> - /omit-if-no-ref/
> - tsadcm0_shut: tsadcm0-shut {
> - rockchip,pins =
> - /* tsadcm0_shut */
> - <0 RK_PA1 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - tsadcm1_shut: tsadcm1-shut {
> - rockchip,pins =
> - /* tsadcm1_shut */
> - <0 RK_PA2 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - tsadc_shutorg: tsadc-shutorg {
> - rockchip,pins =
> - /* tsadc_shutorg */
> - <0 RK_PA1 2 &pcfg_pull_none>;
> - };
> - };
> -
> - uart0 {
> - /omit-if-no-ref/
> - uart0_xfer: uart0-xfer {
> - rockchip,pins =
> - /* uart0_rx */
> - <0 RK_PC0 3 &pcfg_pull_up>,
> - /* uart0_tx */
> - <0 RK_PC1 3 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - uart0_ctsn: uart0-ctsn {
> - rockchip,pins =
> - /* uart0_ctsn */
> - <0 RK_PC7 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart0_rtsn: uart0-rtsn {
> - rockchip,pins =
> - /* uart0_rtsn */
> - <0 RK_PC4 3 &pcfg_pull_none>;
> - };
> - };
> -
> - uart1 {
> - /omit-if-no-ref/
> - uart1m0_xfer: uart1m0-xfer {
> - rockchip,pins =
> - /* uart1_rxm0 */
> - <2 RK_PB3 2 &pcfg_pull_up>,
> - /* uart1_txm0 */
> - <2 RK_PB4 2 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - uart1m0_ctsn: uart1m0-ctsn {
> - rockchip,pins =
> - /* uart1m0_ctsn */
> - <2 RK_PB6 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart1m0_rtsn: uart1m0-rtsn {
> - rockchip,pins =
> - /* uart1m0_rtsn */
> - <2 RK_PB5 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart1m1_xfer: uart1m1-xfer {
> - rockchip,pins =
> - /* uart1_rxm1 */
> - <3 RK_PD7 4 &pcfg_pull_up>,
> - /* uart1_txm1 */
> - <3 RK_PD6 4 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - uart1m1_ctsn: uart1m1-ctsn {
> - rockchip,pins =
> - /* uart1m1_ctsn */
> - <4 RK_PC1 4 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart1m1_rtsn: uart1m1-rtsn {
> - rockchip,pins =
> - /* uart1m1_rtsn */
> - <4 RK_PB6 4 &pcfg_pull_none>;
> - };
> - };
> -
> - uart2 {
> - /omit-if-no-ref/
> - uart2m0_xfer: uart2m0-xfer {
> - rockchip,pins =
> - /* uart2_rxm0 */
> - <0 RK_PD0 1 &pcfg_pull_up>,
> - /* uart2_txm0 */
> - <0 RK_PD1 1 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - uart2m1_xfer: uart2m1-xfer {
> - rockchip,pins =
> - /* uart2_rxm1 */
> - <1 RK_PD6 2 &pcfg_pull_up>,
> - /* uart2_txm1 */
> - <1 RK_PD5 2 &pcfg_pull_up>;
> - };
> - };
> -
> - uart3 {
> - /omit-if-no-ref/
> - uart3m0_xfer: uart3m0-xfer {
> - rockchip,pins =
> - /* uart3_rxm0 */
> - <1 RK_PA0 2 &pcfg_pull_up>,
> - /* uart3_txm0 */
> - <1 RK_PA1 2 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - uart3m0_ctsn: uart3m0-ctsn {
> - rockchip,pins =
> - /* uart3m0_ctsn */
> - <1 RK_PA3 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart3m0_rtsn: uart3m0-rtsn {
> - rockchip,pins =
> - /* uart3m0_rtsn */
> - <1 RK_PA2 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart3m1_xfer: uart3m1-xfer {
> - rockchip,pins =
> - /* uart3_rxm1 */
> - <3 RK_PC0 4 &pcfg_pull_up>,
> - /* uart3_txm1 */
> - <3 RK_PB7 4 &pcfg_pull_up>;
> - };
> - };
> -
> - uart4 {
> - /omit-if-no-ref/
> - uart4m0_xfer: uart4m0-xfer {
> - rockchip,pins =
> - /* uart4_rxm0 */
> - <1 RK_PA4 2 &pcfg_pull_up>,
> - /* uart4_txm0 */
> - <1 RK_PA6 2 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - uart4m0_ctsn: uart4m0-ctsn {
> - rockchip,pins =
> - /* uart4m0_ctsn */
> - <1 RK_PA7 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart4m0_rtsn: uart4m0-rtsn {
> - rockchip,pins =
> - /* uart4m0_rtsn */
> - <1 RK_PA5 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart4m1_xfer: uart4m1-xfer {
> - rockchip,pins =
> - /* uart4_rxm1 */
> - <3 RK_PB1 4 &pcfg_pull_up>,
> - /* uart4_txm1 */
> - <3 RK_PB2 4 &pcfg_pull_up>;
> - };
> - };
> -
> - uart5 {
> - /omit-if-no-ref/
> - uart5m0_xfer: uart5m0-xfer {
> - rockchip,pins =
> - /* uart5_rxm0 */
> - <2 RK_PA1 3 &pcfg_pull_up>,
> - /* uart5_txm0 */
> - <2 RK_PA2 3 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - uart5m0_ctsn: uart5m0-ctsn {
> - rockchip,pins =
> - /* uart5m0_ctsn */
> - <1 RK_PD7 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart5m0_rtsn: uart5m0-rtsn {
> - rockchip,pins =
> - /* uart5m0_rtsn */
> - <2 RK_PA0 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart5m1_xfer: uart5m1-xfer {
> - rockchip,pins =
> - /* uart5_rxm1 */
> - <3 RK_PC3 4 &pcfg_pull_up>,
> - /* uart5_txm1 */
> - <3 RK_PC2 4 &pcfg_pull_up>;
> - };
> - };
> -
> - uart6 {
> - /omit-if-no-ref/
> - uart6m0_xfer: uart6m0-xfer {
> - rockchip,pins =
> - /* uart6_rxm0 */
> - <2 RK_PA3 3 &pcfg_pull_up>,
> - /* uart6_txm0 */
> - <2 RK_PA4 3 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - uart6m0_ctsn: uart6m0-ctsn {
> - rockchip,pins =
> - /* uart6m0_ctsn */
> - <2 RK_PC0 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart6m0_rtsn: uart6m0-rtsn {
> - rockchip,pins =
> - /* uart6m0_rtsn */
> - <2 RK_PB7 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart6m1_xfer: uart6m1-xfer {
> - rockchip,pins =
> - /* uart6_rxm1 */
> - <1 RK_PD6 3 &pcfg_pull_up>,
> - /* uart6_txm1 */
> - <1 RK_PD5 3 &pcfg_pull_up>;
> - };
> - };
> -
> - uart7 {
> - /omit-if-no-ref/
> - uart7m0_xfer: uart7m0-xfer {
> - rockchip,pins =
> - /* uart7_rxm0 */
> - <2 RK_PA5 3 &pcfg_pull_up>,
> - /* uart7_txm0 */
> - <2 RK_PA6 3 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - uart7m0_ctsn: uart7m0-ctsn {
> - rockchip,pins =
> - /* uart7m0_ctsn */
> - <2 RK_PC2 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart7m0_rtsn: uart7m0-rtsn {
> - rockchip,pins =
> - /* uart7m0_rtsn */
> - <2 RK_PC1 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart7m1_xfer: uart7m1-xfer {
> - rockchip,pins =
> - /* uart7_rxm1 */
> - <3 RK_PC5 4 &pcfg_pull_up>,
> - /* uart7_txm1 */
> - <3 RK_PC4 4 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - uart7m2_xfer: uart7m2-xfer {
> - rockchip,pins =
> - /* uart7_rxm2 */
> - <4 RK_PA3 4 &pcfg_pull_up>,
> - /* uart7_txm2 */
> - <4 RK_PA2 4 &pcfg_pull_up>;
> - };
> - };
> -
> - uart8 {
> - /omit-if-no-ref/
> - uart8m0_xfer: uart8m0-xfer {
> - rockchip,pins =
> - /* uart8_rxm0 */
> - <2 RK_PC6 2 &pcfg_pull_up>,
> - /* uart8_txm0 */
> - <2 RK_PC5 3 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - uart8m0_ctsn: uart8m0-ctsn {
> - rockchip,pins =
> - /* uart8m0_ctsn */
> - <2 RK_PB2 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart8m0_rtsn: uart8m0-rtsn {
> - rockchip,pins =
> - /* uart8m0_rtsn */
> - <2 RK_PB1 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart8m1_xfer: uart8m1-xfer {
> - rockchip,pins =
> - /* uart8_rxm1 */
> - <3 RK_PA0 4 &pcfg_pull_up>,
> - /* uart8_txm1 */
> - <2 RK_PD7 4 &pcfg_pull_up>;
> - };
> - };
> -
> - uart9 {
> - /omit-if-no-ref/
> - uart9m0_xfer: uart9m0-xfer {
> - rockchip,pins =
> - /* uart9_rxm0 */
> - <2 RK_PA7 3 &pcfg_pull_up>,
> - /* uart9_txm0 */
> - <2 RK_PB0 3 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - uart9m0_ctsn: uart9m0-ctsn {
> - rockchip,pins =
> - /* uart9m0_ctsn */
> - <2 RK_PC4 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart9m0_rtsn: uart9m0-rtsn {
> - rockchip,pins =
> - /* uart9m0_rtsn */
> - <2 RK_PC3 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - uart9m1_xfer: uart9m1-xfer {
> - rockchip,pins =
> - /* uart9_rxm1 */
> - <4 RK_PC6 4 &pcfg_pull_up>,
> - /* uart9_txm1 */
> - <4 RK_PC5 4 &pcfg_pull_up>;
> - };
> -
> - /omit-if-no-ref/
> - uart9m2_xfer: uart9m2-xfer {
> - rockchip,pins =
> - /* uart9_rxm2 */
> - <4 RK_PA5 4 &pcfg_pull_up>,
> - /* uart9_txm2 */
> - <4 RK_PA4 4 &pcfg_pull_up>;
> - };
> - };
> -
> - vop {
> - /omit-if-no-ref/
> - vopm0_pins: vopm0-pins {
> - rockchip,pins =
> - /* vop_pwmm0 */
> - <0 RK_PC3 2 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - vopm1_pins: vopm1-pins {
> - rockchip,pins =
> - /* vop_pwmm1 */
> - <3 RK_PC4 2 &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -/*
> - * This part is edited handly.
> - */
> -&pinctrl {
> - spi0-hs {
> - /omit-if-no-ref/
> - spi0m0_pins_hs: spi0m0-pins {
> - rockchip,pins =
> - /* spi0_clkm0 */
> - <0 RK_PB5 2 &pcfg_pull_up_drv_level_1>,
> - /* spi0_misom0 */
> - <0 RK_PC5 2 &pcfg_pull_up_drv_level_1>,
> - /* spi0_mosim0 */
> - <0 RK_PB6 2 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi0m0_cs0_hs: spi0m0-cs0 {
> - rockchip,pins =
> - /* spi0_cs0m0 */
> - <0 RK_PC6 2 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi0m0_cs1_hs: spi0m0-cs1 {
> - rockchip,pins =
> - /* spi0_cs1m0 */
> - <0 RK_PC4 2 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi0m1_pins_hs: spi0m1-pins {
> - rockchip,pins =
> - /* spi0_clkm1 */
> - <2 RK_PD3 3 &pcfg_pull_up_drv_level_1>,
> - /* spi0_misom1 */
> - <2 RK_PD0 3 &pcfg_pull_up_drv_level_1>,
> - /* spi0_mosim1 */
> - <2 RK_PD1 3 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi0m1_cs0_hs: spi0m1-cs0 {
> - rockchip,pins =
> - /* spi0_cs0m1 */
> - <2 RK_PD2 3 &pcfg_pull_up_drv_level_1>;
> - };
> - };
> -
> - spi1-hs {
> - /omit-if-no-ref/
> - spi1m0_pins_hs: spi1m0-pins {
> - rockchip,pins =
> - /* spi1_clkm0 */
> - <2 RK_PB5 3 &pcfg_pull_up_drv_level_1>,
> - /* spi1_misom0 */
> - <2 RK_PB6 3 &pcfg_pull_up_drv_level_1>,
> - /* spi1_mosim0 */
> - <2 RK_PB7 4 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi1m0_cs0_hs: spi1m0-cs0 {
> - rockchip,pins =
> - /* spi1_cs0m0 */
> - <2 RK_PC0 4 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi1m0_cs1_hs: spi1m0-cs1 {
> - rockchip,pins =
> - /* spi1_cs1m0 */
> - <2 RK_PC6 3 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi1m1_pins_hs: spi1m1-pins {
> - rockchip,pins =
> - /* spi1_clkm1 */
> - <3 RK_PC3 3 &pcfg_pull_up_drv_level_1>,
> - /* spi1_misom1 */
> - <3 RK_PC2 3 &pcfg_pull_up_drv_level_1>,
> - /* spi1_mosim1 */
> - <3 RK_PC1 3 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi1m1_cs0_hs: spi1m1-cs0 {
> - rockchip,pins =
> - /* spi1_cs0m1 */
> - <3 RK_PA1 3 &pcfg_pull_up_drv_level_1>;
> - };
> - };
> -
> - spi2-hs {
> - /omit-if-no-ref/
> - spi2m0_pins_hs: spi2m0-pins {
> - rockchip,pins =
> - /* spi2_clkm0 */
> - <2 RK_PC1 4 &pcfg_pull_up_drv_level_1>,
> - /* spi2_misom0 */
> - <2 RK_PC2 4 &pcfg_pull_up_drv_level_1>,
> - /* spi2_mosim0 */
> - <2 RK_PC3 4 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi2m0_cs0_hs: spi2m0-cs0 {
> - rockchip,pins =
> - /* spi2_cs0m0 */
> - <2 RK_PC4 4 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi2m0_cs1_hs: spi2m0-cs1 {
> - rockchip,pins =
> - /* spi2_cs1m0 */
> - <2 RK_PC5 4 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi2m1_pins_hs: spi2m1-pins {
> - rockchip,pins =
> - /* spi2_clkm1 */
> - <3 RK_PA0 3 &pcfg_pull_up_drv_level_1>,
> - /* spi2_misom1 */
> - <2 RK_PD7 3 &pcfg_pull_up_drv_level_1>,
> - /* spi2_mosim1 */
> - <2 RK_PD6 3 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi2m1_cs0_hs: spi2m1-cs0 {
> - rockchip,pins =
> - /* spi2_cs0m1 */
> - <2 RK_PD5 3 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi2m1_cs1_hs: spi2m1-cs1 {
> - rockchip,pins =
> - /* spi2_cs1m1 */
> - <2 RK_PD4 3 &pcfg_pull_up_drv_level_1>;
> - };
> - };
> -
> - spi3-hs {
> - /omit-if-no-ref/
> - spi3m0_pins_hs: spi3m0-pins {
> - rockchip,pins =
> - /* spi3_clkm0 */
> - <4 RK_PB3 4 &pcfg_pull_up_drv_level_1>,
> - /* spi3_misom0 */
> - <4 RK_PB0 4 &pcfg_pull_up_drv_level_1>,
> - /* spi3_mosim0 */
> - <4 RK_PB2 4 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi3m0_cs0_hs: spi3m0-cs0 {
> - rockchip,pins =
> - /* spi3_cs0m0 */
> - <4 RK_PA6 4 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi3m0_cs1_hs: spi3m0-cs1 {
> - rockchip,pins =
> - /* spi3_cs1m0 */
> - <4 RK_PA7 4 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi3m1_pins_hs: spi3m1-pins {
> - rockchip,pins =
> - /* spi3_clkm1 */
> - <4 RK_PC2 2 &pcfg_pull_up_drv_level_1>,
> - /* spi3_misom1 */
> - <4 RK_PC5 2 &pcfg_pull_up_drv_level_1>,
> - /* spi3_mosim1 */
> - <4 RK_PC3 2 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi3m1_cs0_hs: spi3m1-cs0 {
> - rockchip,pins =
> - /* spi3_cs0m1 */
> - <4 RK_PC6 2 &pcfg_pull_up_drv_level_1>;
> - };
> -
> - /omit-if-no-ref/
> - spi3m1_cs1_hs: spi3m1-cs1 {
> - rockchip,pins =
> - /* spi3_cs1m1 */
> - <4 RK_PD1 2 &pcfg_pull_up_drv_level_1>;
> - };
> - };
> -
> - gmac-txd-level3 {
> - /omit-if-no-ref/
> - gmac0_tx_bus2_level3: gmac0-tx-bus2-level3 {
> - rockchip,pins =
> - /* gmac0_txd0 */
> - <2 RK_PB3 1 &pcfg_pull_none_drv_level_3>,
> - /* gmac0_txd1 */
> - <2 RK_PB4 1 &pcfg_pull_none_drv_level_3>,
> - /* gmac0_txen */
> - <2 RK_PB5 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac0_rgmii_bus_level3: gmac0-rgmii-bus-level3 {
> - rockchip,pins =
> - /* gmac0_rxd2 */
> - <2 RK_PA3 2 &pcfg_pull_none>,
> - /* gmac0_rxd3 */
> - <2 RK_PA4 2 &pcfg_pull_none>,
> - /* gmac0_txd2 */
> - <2 RK_PA6 2 &pcfg_pull_none_drv_level_3>,
> - /* gmac0_txd3 */
> - <2 RK_PA7 2 &pcfg_pull_none_drv_level_3>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m0_tx_bus2_level3: gmac1m0-tx-bus2-level3 {
> - rockchip,pins =
> - /* gmac1_txd0m0 */
> - <3 RK_PB5 3 &pcfg_pull_none_drv_level_3>,
> - /* gmac1_txd1m0 */
> - <3 RK_PB6 3 &pcfg_pull_none_drv_level_3>,
> - /* gmac1_txenm0 */
> - <3 RK_PB7 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m0_rgmii_bus_level3: gmac1m0-rgmii-bus-level3 {
> - rockchip,pins =
> - /* gmac1_rxd2m0 */
> - <3 RK_PA4 3 &pcfg_pull_none>,
> - /* gmac1_rxd3m0 */
> - <3 RK_PA5 3 &pcfg_pull_none>,
> - /* gmac1_txd2m0 */
> - <3 RK_PA2 3 &pcfg_pull_none_drv_level_3>,
> - /* gmac1_txd3m0 */
> - <3 RK_PA3 3 &pcfg_pull_none_drv_level_3>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m1_tx_bus2_level3: gmac1m1-tx-bus2-level3 {
> - rockchip,pins =
> - /* gmac1_txd0m1 */
> - <4 RK_PA4 3 &pcfg_pull_none_drv_level_3>,
> - /* gmac1_txd1m1 */
> - <4 RK_PA5 3 &pcfg_pull_none_drv_level_3>,
> - /* gmac1_txenm1 */
> - <4 RK_PA6 3 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m1_rgmii_bus_level3: gmac1m1-rgmii-bus-level3 {
> - rockchip,pins =
> - /* gmac1_rxd2m1 */
> - <4 RK_PA1 3 &pcfg_pull_none>,
> - /* gmac1_rxd3m1 */
> - <4 RK_PA2 3 &pcfg_pull_none>,
> - /* gmac1_txd2m1 */
> - <3 RK_PD6 3 &pcfg_pull_none_drv_level_3>,
> - /* gmac1_txd3m1 */
> - <3 RK_PD7 3 &pcfg_pull_none_drv_level_3>;
> - };
> - };
> -
> - gmac-txc-level2 {
> - /omit-if-no-ref/
> - gmac0_rgmii_clk_level2: gmac0-rgmii-clk-level2 {
> - rockchip,pins =
> - /* gmac0_rxclk */
> - <2 RK_PA5 2 &pcfg_pull_none>,
> - /* gmac0_txclk */
> - <2 RK_PB0 2 &pcfg_pull_none_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m0_rgmii_clk_level2: gmac1m0-rgmii-clk-level2 {
> - rockchip,pins =
> - /* gmac1_rxclkm0 */
> - <3 RK_PA7 3 &pcfg_pull_none>,
> - /* gmac1_txclkm0 */
> - <3 RK_PA6 3 &pcfg_pull_none_drv_level_2>;
> - };
> -
> - /omit-if-no-ref/
> - gmac1m1_rgmii_clk_level2: gmac1m1-rgmii-clk-level2 {
> - rockchip,pins =
> - /* gmac1_rxclkm1 */
> - <4 RK_PA3 3 &pcfg_pull_none>,
> - /* gmac1_txclkm1 */
> - <4 RK_PA0 3 &pcfg_pull_none_drv_level_2>;
> - };
> - };
> -
> - tsadc {
> - /omit-if-no-ref/
> - tsadc_pin: tsadc-pin {
> - rockchip,pins =
> - /* tsadc_pin */
> - <0 RK_PA1 0 &pcfg_pull_none>;
> - };
> - };
> -
> - lcdc {
> - /omit-if-no-ref/
> - lcdc_clock: lcdc-clock {
> - rockchip,pins =
> - /* lcdc_clk */
> - <3 RK_PA0 1 &pcfg_pull_none>,
> - /* lcdc_den */
> - <3 RK_PC3 1 &pcfg_pull_none>,
> - /* lcdc_hsync */
> - <3 RK_PC1 1 &pcfg_pull_none>,
> - /* lcdc_vsync */
> - <3 RK_PC2 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - lcdc_data16: lcdc-data16 {
> - rockchip,pins =
> - /* lcdc_d3 */
> - <2 RK_PD3 1 &pcfg_pull_none>,
> - /* lcdc_d4 */
> - <2 RK_PD4 1 &pcfg_pull_none>,
> - /* lcdc_d5 */
> - <2 RK_PD5 1 &pcfg_pull_none>,
> - /* lcdc_d6 */
> - <2 RK_PD6 1 &pcfg_pull_none>,
> - /* lcdc_d7 */
> - <2 RK_PD7 1 &pcfg_pull_none>,
> - /* lcdc_d10 */
> - <3 RK_PA3 1 &pcfg_pull_none>,
> - /* lcdc_d11 */
> - <3 RK_PA4 1 &pcfg_pull_none>,
> - /* lcdc_d12 */
> - <3 RK_PA5 1 &pcfg_pull_none>,
> - /* lcdc_d13 */
> - <3 RK_PA6 1 &pcfg_pull_none>,
> - /* lcdc_d14 */
> - <3 RK_PA7 1 &pcfg_pull_none>,
> - /* lcdc_d15 */
> - <3 RK_PB0 1 &pcfg_pull_none>,
> - /* lcdc_d19 */
> - <3 RK_PB4 1 &pcfg_pull_none>,
> - /* lcdc_d20 */
> - <3 RK_PB5 1 &pcfg_pull_none>,
> - /* lcdc_d21 */
> - <3 RK_PB6 1 &pcfg_pull_none>,
> - /* lcdc_d22 */
> - <3 RK_PB7 1 &pcfg_pull_none>,
> - /* lcdc_d23 */
> - <3 RK_PC0 1 &pcfg_pull_none>;
> - };
> -
> - /omit-if-no-ref/
> - lcdc_data18: lcdc-data18 {
> - rockchip,pins =
> - /* lcdc_d2 */
> - <2 RK_PD2 1 &pcfg_pull_none>,
> - /* lcdc_d3 */
> - <2 RK_PD3 1 &pcfg_pull_none>,
> - /* lcdc_d4 */
> - <2 RK_PD4 1 &pcfg_pull_none>,
> - /* lcdc_d5 */
> - <2 RK_PD5 1 &pcfg_pull_none>,
> - /* lcdc_d6 */
> - <2 RK_PD6 1 &pcfg_pull_none>,
> - /* lcdc_d7 */
> - <2 RK_PD7 1 &pcfg_pull_none>,
> - /* lcdc_d10 */
> - <3 RK_PA3 1 &pcfg_pull_none>,
> - /* lcdc_d11 */
> - <3 RK_PA4 1 &pcfg_pull_none>,
> - /* lcdc_d12 */
> - <3 RK_PA5 1 &pcfg_pull_none>,
> - /* lcdc_d13 */
> - <3 RK_PA6 1 &pcfg_pull_none>,
> - /* lcdc_d14 */
> - <3 RK_PA7 1 &pcfg_pull_none>,
> - /* lcdc_d15 */
> - <3 RK_PB0 1 &pcfg_pull_none>,
> - /* lcdc_d18 */
> - <3 RK_PB3 1 &pcfg_pull_none>,
> - /* lcdc_d19 */
> - <3 RK_PB4 1 &pcfg_pull_none>,
> - /* lcdc_d20 */
> - <3 RK_PB5 1 &pcfg_pull_none>,
> - /* lcdc_d21 */
> - <3 RK_PB6 1 &pcfg_pull_none>,
> - /* lcdc_d22 */
> - <3 RK_PB7 1 &pcfg_pull_none>,
> - /* lcdc_d23 */
> - <3 RK_PC0 1 &pcfg_pull_none>;
> - };
> - };
> -
> -};
> diff --git a/arch/arm/dts/rk3568-radxa-cm3i.dtsi b/arch/arm/dts/rk3568-radxa-cm3i.dtsi
> deleted file mode 100644
> index 45b03dcbbad4..000000000000
> --- a/arch/arm/dts/rk3568-radxa-cm3i.dtsi
> +++ /dev/null
> @@ -1,412 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include "rk3568.dtsi"
> -
> -/ {
> - compatible = "radxa,cm3i", "rockchip,rk3568";
> -
> - aliases {
> - mmc0 = &sdhci;
> - };
> -
> - chosen {
> - stdout-path = "serial2:115200n8";
> - };
> -
> - gpio-leds {
> - compatible = "gpio-leds";
> -
> - led_user: led-0 {
> - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
> - function = LED_FUNCTION_HEARTBEAT;
> - color = <LED_COLOR_ID_GREEN>;
> - linux,default-trigger = "heartbeat";
> - pinctrl-names = "default";
> - pinctrl-0 = <&led_user_en>;
> - };
> - };
> -
> - pcie30_avdd0v9: pcie30-avdd0v9-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "pcie30_avdd0v9";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - vin-supply = <&vcc3v3_sys>;
> - };
> -
> - pcie30_avdd1v8: pcie30-avdd1v8-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "pcie30_avdd1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - vin-supply = <&vcc3v3_sys>;
> - };
> -
> - vcc3v3_sys: vcc3v3-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc5v_input>;
> - };
> -
> - vcc5v0_sys: vcc5v0-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v_input>;
> - };
> -
> - /* labeled +5v_input in schematic */
> - vcc5v_input: vcc5v-input-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v_input";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - };
> -};
> -
> -&combphy0 {
> - status = "okay";
> -};
> -
> -&combphy1 {
> - status = "okay";
> -};
> -
> -&combphy2 {
> - status = "okay";
> -};
> -
> -&cpu0 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu1 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu2 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu3 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&display_subsystem {
> - status = "disabled";
> -};
> -
> -&gpu {
> - mali-supply = <&vdd_gpu>;
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> -
> - vdd_cpu: regulator at 1c {
> - compatible = "tcs,tcs4525";
> - reg = <0x1c>;
> - fcs,suspend-voltage-selector = <1>;
> - regulator-name = "vdd_cpu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1150000>;
> - regulator-ramp-delay = <2300>;
> - vin-supply = <&vcc5v_input>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - rk809: pmic at 20 {
> - compatible = "rockchip,rk809";
> - reg = <0x20>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> - #clock-cells = <1>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pmic_int>;
> - rockchip,system-power-controller;
> - wakeup-source;
> -
> - vcc1-supply = <&vcc3v3_sys>;
> - vcc2-supply = <&vcc3v3_sys>;
> - vcc3-supply = <&vcc3v3_sys>;
> - vcc4-supply = <&vcc3v3_sys>;
> - vcc5-supply = <&vcc3v3_sys>;
> - vcc6-supply = <&vcc3v3_sys>;
> - vcc7-supply = <&vcc3v3_sys>;
> - vcc8-supply = <&vcc3v3_sys>;
> - vcc9-supply = <&vcc3v3_sys>;
> -
> - regulators {
> - vdd_logic: DCDC_REG1 {
> - regulator-name = "vdd_logic";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdd_gpu: DCDC_REG2 {
> - regulator-name = "vdd_gpu";
> - regulator-always-on;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_ddr: DCDC_REG3 {
> - regulator-name = "vcc_ddr";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - };
> - };
> -
> - vdd_npu: DCDC_REG4 {
> - regulator-name = "vdd_npu";
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_1v8: DCDC_REG5 {
> - regulator-name = "vcc_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_image: LDO_REG1 {
> - regulator-name = "vdda0v9_image";
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda_0v9: LDO_REG2 {
> - regulator-name = "vdda_0v9";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_pmu: LDO_REG3 {
> - regulator-name = "vdda0v9_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vccio_acodec: LDO_REG4 {
> - regulator-name = "vccio_acodec";
> - regulator-always-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vccio_sd: LDO_REG5 {
> - regulator-name = "vccio_sd";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_pmu: LDO_REG6 {
> - regulator-name = "vcc3v3_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcca_1v8: LDO_REG7 {
> - regulator-name = "vcca_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcca1v8_pmu: LDO_REG8 {
> - regulator-name = "vcca1v8_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vcca1v8_image: LDO_REG9 {
> - regulator-name = "vcca1v8_image";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_3v3: SWITCH_REG1 {
> - regulator-name = "vcc_3v3";
> - regulator-always-on;
> - regulator-boot-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_sd: SWITCH_REG2 {
> - regulator-name = "vcc3v3_sd";
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> - };
> - };
> -};
> -
> -&pinctrl {
> - leds {
> - led_user_en: led_user_en {
> - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pmic {
> - pmic_int: pmic_int {
> - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -};
> -
> -&pmu_io_domains {
> - pmuio1-supply = <&vcc3v3_pmu>;
> - pmuio2-supply = <&vcc3v3_pmu>;
> - vccio1-supply = <&vccio_acodec>;
> - vccio2-supply = <&vcc_1v8>;
> - vccio3-supply = <&vccio_sd>;
> - vccio4-supply = <&vcc_1v8>;
> - vccio5-supply = <&vcc_3v3>;
> - vccio6-supply = <&vcc_1v8>;
> - vccio7-supply = <&vcc_3v3>;
> - status = "okay";
> -};
> -
> -&saradc {
> - vref-supply = <&vcca_1v8>;
> - status = "okay";
> -};
> -
> -&sdhci {
> - bus-width = <8>;
> - max-frequency = <200000000>;
> - non-removable;
> - pinctrl-names = "default";
> - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
> - vmmc-supply = <&vcc_3v3>;
> - vqmmc-supply = <&vcc_1v8>;
> - status = "okay";
> -};
> -
> -&tsadc {
> - rockchip,hw-tshut-mode = <1>;
> - rockchip,hw-tshut-polarity = <0>;
> - status = "okay";
> -};
> -
> -&uart2 {
> - status = "okay";
> -};
> -
> -&usb2phy0 {
> - status = "okay";
> -};
> -
> -&usb2phy1 {
> - status = "okay";
> -};
> -
> -&usb_host0_xhci {
> - extcon = <&usb2phy0>;
> -};
> diff --git a/arch/arm/dts/rk3568-radxa-e25.dts b/arch/arm/dts/rk3568-radxa-e25.dts
> deleted file mode 100644
> index 72ad74c38a2b..000000000000
> --- a/arch/arm/dts/rk3568-radxa-e25.dts
> +++ /dev/null
> @@ -1,236 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -
> -/dts-v1/;
> -#include "rk3568-radxa-cm3i.dtsi"
> -
> -/ {
> - model = "Radxa E25 Carrier Board";
> - compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568";
> -
> - aliases {
> - mmc1 = &sdmmc0;
> - };
> -
> - pwm-leds {
> - compatible = "pwm-leds-multicolor";
> -
> - multi-led {
> - color = <LED_COLOR_ID_RGB>;
> - max-brightness = <255>;
> -
> - led-red {
> - color = <LED_COLOR_ID_RED>;
> - pwms = <&pwm1 0 1000000 0>;
> - };
> -
> - led-green {
> - color = <LED_COLOR_ID_GREEN>;
> - pwms = <&pwm2 0 1000000 0>;
> - };
> -
> - led-blue {
> - color = <LED_COLOR_ID_BLUE>;
> - pwms = <&pwm12 0 1000000 0>;
> - };
> - };
> - };
> -
> - vbus_typec: vbus-typec-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vbus_typec_en>;
> - regulator-name = "vbus_typec";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -
> - /* actually fed by vcc5v0_sys, dependent
> - * on pi6c clock generator
> - */
> - vcc3v3_minipcie: vcc3v3-minipcie-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&minipcie_enable_h>;
> - regulator-name = "vcc3v3_minipcie";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc3v3_pi6c_05>;
> - };
> -
> - vcc3v3_ngff: vcc3v3-ngff-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&ngffpcie_enable_h>;
> - regulator-name = "vcc3v3_ngff";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -
> - vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie30x1_enable_h>;
> - regulator-name = "vcc3v3_pcie30x1";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -
> - vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie_enable_h>;
> - regulator-name = "vcc3v3_pcie";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -};
> -
> -&combphy1 {
> - phy-supply = <&vcc3v3_pcie30x1>;
> -};
> -
> -&pcie2x1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie20_reset_h>;
> - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_pi6c_05>;
> - status = "okay";
> -};
> -
> -&pcie30phy {
> - data-lanes = <1 2>;
> - status = "okay";
> -};
> -
> -&pcie3x1 {
> - num-lanes = <1>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie30x1m0_pins>;
> - reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_minipcie>;
> - status = "okay";
> -};
> -
> -&pcie3x2 {
> - num-lanes = <1>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie30x2_reset_h>;
> - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_pi6c_05>;
> - status = "okay";
> -};
> -
> -&pinctrl {
> - pcie {
> - pcie20_reset_h: pcie20-reset-h {
> - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - pcie30x1_enable_h: pcie30x1-enable-h {
> - rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - pcie30x2_reset_h: pcie30x2-reset-h {
> - rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - pcie_enable_h: pcie-enable-h {
> - rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - usb {
> - minipcie_enable_h: minipcie-enable-h {
> - rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - ngffpcie_enable_h: ngffpcie-enable-h {
> - rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - vbus_typec_en: vbus_typec_en {
> - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -&pwm1 {
> - status = "okay";
> -};
> -
> -&pwm2 {
> - status = "okay";
> -};
> -
> -&pwm12 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pwm12m1_pins>;
> - status = "okay";
> -};
> -
> -&sata1 {
> - status = "okay";
> -};
> -
> -&sdmmc0 {
> - bus-width = <4>;
> - cap-sd-highspeed;
> - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> - /* Also used in pcie30x1_clkreqnm0 */
> - disable-wp;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>;
> - sd-uhs-sdr104;
> - vmmc-supply = <&vcc3v3_sd>;
> - vqmmc-supply = <&vccio_sd>;
> - status = "okay";
> -};
> -
> -&usb_host0_ehci {
> - status = "okay";
> -};
> -
> -&usb_host0_ohci {
> - status = "okay";
> -};
> -
> -&usb_host0_xhci {
> - status = "okay";
> -};
> -
> -&usb_host1_ehci {
> - status = "okay";
> -};
> -
> -&usb_host1_ohci {
> - status = "okay";
> -};
> -
> -&usb2phy0_otg {
> - phy-supply = <&vbus_typec>;
> - status = "okay";
> -};
> -
> -&usb2phy1_host {
> - phy-supply = <&vcc3v3_minipcie>;
> - status = "okay";
> -};
> -
> -&usb2phy1_otg {
> - phy-supply = <&vcc3v3_ngff>;
> - status = "okay";
> -};
> diff --git a/arch/arm/dts/rk3568-rock-3a.dts b/arch/arm/dts/rk3568-rock-3a.dts
> deleted file mode 100644
> index a5e974ea659e..000000000000
> --- a/arch/arm/dts/rk3568-rock-3a.dts
> +++ /dev/null
> @@ -1,859 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -
> -/dts-v1/;
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include <dt-bindings/soc/rockchip,vop2.h>
> -#include "rk3568.dtsi"
> -
> -/ {
> - model = "Radxa ROCK3 Model A";
> - compatible = "radxa,rock3a", "rockchip,rk3568";
> -
> - aliases {
> - ethernet0 = &gmac1;
> - mmc0 = &sdhci;
> - mmc1 = &sdmmc0;
> - mmc2 = &sdmmc2;
> - };
> -
> - chosen: chosen {
> - stdout-path = "serial2:1500000n8";
> - };
> -
> - hdmi-con {
> - compatible = "hdmi-connector";
> - type = "a";
> -
> - port {
> - hdmi_con_in: endpoint {
> - remote-endpoint = <&hdmi_out_con>;
> - };
> - };
> - };
> -
> - gmac1_clkin: external-gmac1-clock {
> - compatible = "fixed-clock";
> - clock-frequency = <125000000>;
> - clock-output-names = "gmac1_clkin";
> - #clock-cells = <0>;
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> -
> - led_user: led-0 {
> - gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
> - function = LED_FUNCTION_HEARTBEAT;
> - color = <LED_COLOR_ID_BLUE>;
> - linux,default-trigger = "heartbeat";
> - pinctrl-names = "default";
> - pinctrl-0 = <&led_user_en>;
> - };
> - };
> -
> - rk809-sound {
> - compatible = "simple-audio-card";
> - simple-audio-card,format = "i2s";
> - simple-audio-card,name = "Analog RK809";
> - simple-audio-card,mclk-fs = <256>;
> -
> - simple-audio-card,cpu {
> - sound-dai = <&i2s1_8ch>;
> - };
> -
> - simple-audio-card,codec {
> - sound-dai = <&rk809>;
> - };
> - };
> -
> - sdio_pwrseq: sdio-pwrseq {
> - compatible = "mmc-pwrseq-simple";
> - clocks = <&rk809 1>;
> - clock-names = "ext_clock";
> - pinctrl-names = "default";
> - pinctrl-0 = <&wifi_enable>;
> - post-power-on-delay-ms = <100>;
> - power-off-delay-us = <5000000>;
> - reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
> - };
> -
> - vcc12v_dcin: vcc12v-dcin-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc12v_dcin";
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - pcie30_avdd0v9: pcie30-avdd0v9-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "pcie30_avdd0v9";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - vin-supply = <&vcc3v3_sys>;
> - };
> -
> - pcie30_avdd1v8: pcie30-avdd1v8-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "pcie30_avdd1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - vin-supply = <&vcc3v3_sys>;
> - };
> -
> - /* pi6c pcie clock generator */
> - vcc3v3_pi6c_03: vcc3v3-pi6c-03-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_pi6c_03";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -
> - vcc3v3_pcie: vcc3v3-pcie-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie_enable_h>;
> - regulator-name = "vcc3v3_pcie";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc5v0_sys>;
> - };
> -
> - vcc3v3_sys: vcc3v3-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc12v_dcin>;
> - };
> -
> - vcc5v0_sys: vcc5v0-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc12v_dcin>;
> - };
> -
> - vcc5v0_usb: vcc5v0-usb-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_usb";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc12v_dcin>;
> - };
> -
> - vcc5v0_usb_host: vcc5v0-usb-host-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb_host_en>;
> - regulator-name = "vcc5v0_usb_host";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_usb>;
> - };
> -
> - vcc5v0_usb_hub: vcc5v0-usb-hub-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb_hub_en>;
> - regulator-name = "vcc5v0_usb_hub";
> - regulator-always-on;
> - vin-supply = <&vcc5v0_usb>;
> - };
> -
> - vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc5v0_usb_otg_en>;
> - regulator-name = "vcc5v0_usb_otg";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc5v0_usb>;
> - };
> -
> - vcc_cam: vcc-cam-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc_cam_en>;
> - regulator-name = "vcc_cam";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc3v3_sys>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_mipi: vcc-mipi-regulator {
> - compatible = "regulator-fixed";
> - enable-active-high;
> - gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vcc_mipi_en>;
> - regulator-name = "vcc_mipi";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vcc3v3_sys>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -};
> -
> -&combphy0 {
> - status = "okay";
> -};
> -
> -&combphy1 {
> - status = "okay";
> -};
> -
> -&combphy2 {
> - status = "okay";
> -};
> -
> -&cpu0 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu1 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu2 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&cpu3 {
> - cpu-supply = <&vdd_cpu>;
> -};
> -
> -&gmac1 {
> - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
> - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
> - clock_in_out = "input";
> - phy-handle = <&rgmii_phy1>;
> - phy-mode = "rgmii-id";
> - phy-supply = <&vcc_3v3>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&gmac1m1_miim
> - &gmac1m1_tx_bus2
> - &gmac1m1_rx_bus2
> - &gmac1m1_rgmii_clk
> - &gmac1m1_clkinout
> - &gmac1m1_rgmii_bus>;
> - status = "okay";
> -};
> -
> -&gpu {
> - mali-supply = <&vdd_gpu>;
> - status = "okay";
> -};
> -
> -&hdmi {
> - avdd-0v9-supply = <&vdda0v9_image>;
> - avdd-1v8-supply = <&vcca1v8_image>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm1_cec>;
> - status = "okay";
> -};
> -
> -&hdmi_in {
> - hdmi_in_vp0: endpoint {
> - remote-endpoint = <&vp0_out_hdmi>;
> - };
> -};
> -
> -&hdmi_out {
> - hdmi_out_con: endpoint {
> - remote-endpoint = <&hdmi_con_in>;
> - };
> -};
> -
> -&hdmi_sound {
> - status = "okay";
> -};
> -
> -&i2c0 {
> - status = "okay";
> -
> - vdd_cpu: regulator at 1c {
> - compatible = "tcs,tcs4525";
> - reg = <0x1c>;
> - fcs,suspend-voltage-selector = <1>;
> - regulator-name = "vdd_cpu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1150000>;
> - regulator-ramp-delay = <2300>;
> - vin-supply = <&vcc5v0_sys>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - rk809: pmic at 20 {
> - compatible = "rockchip,rk809";
> - reg = <0x20>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> - assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
> - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
> - #clock-cells = <1>;
> - clock-names = "mclk";
> - clocks = <&cru I2S1_MCLKOUT_TX>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
> - rockchip,system-power-controller;
> - #sound-dai-cells = <0>;
> - vcc1-supply = <&vcc3v3_sys>;
> - vcc2-supply = <&vcc3v3_sys>;
> - vcc3-supply = <&vcc3v3_sys>;
> - vcc4-supply = <&vcc3v3_sys>;
> - vcc5-supply = <&vcc3v3_sys>;
> - vcc6-supply = <&vcc3v3_sys>;
> - vcc7-supply = <&vcc3v3_sys>;
> - vcc8-supply = <&vcc3v3_sys>;
> - vcc9-supply = <&vcc3v3_sys>;
> - wakeup-source;
> -
> - regulators {
> - vdd_logic: DCDC_REG1 {
> - regulator-name = "vdd_logic";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdd_gpu: DCDC_REG2 {
> - regulator-name = "vdd_gpu";
> - regulator-always-on;
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_ddr: DCDC_REG3 {
> - regulator-name = "vcc_ddr";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-initial-mode = <0x2>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - };
> - };
> -
> - vdd_npu: DCDC_REG4 {
> - regulator-name = "vdd_npu";
> - regulator-initial-mode = <0x2>;
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-ramp-delay = <6001>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_1v8: DCDC_REG5 {
> - regulator-name = "vcc_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_image: LDO_REG1 {
> - regulator-name = "vdda0v9_image";
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda_0v9: LDO_REG2 {
> - regulator-name = "vdda_0v9";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vdda0v9_pmu: LDO_REG3 {
> - regulator-name = "vdda0v9_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <900000>;
> - };
> - };
> -
> - vccio_acodec: LDO_REG4 {
> - regulator-name = "vccio_acodec";
> - regulator-always-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vccio_sd: LDO_REG5 {
> - regulator-name = "vccio_sd";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_pmu: LDO_REG6 {
> - regulator-name = "vcc3v3_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcca_1v8: LDO_REG7 {
> - regulator-name = "vcca_1v8";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcca1v8_pmu: LDO_REG8 {
> - regulator-name = "vcca1v8_pmu";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vcca1v8_image: LDO_REG9 {
> - regulator-name = "vcca1v8_image";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc_3v3: SWITCH_REG1 {
> - regulator-name = "vcc_3v3";
> - regulator-always-on;
> - regulator-boot-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_sd: SWITCH_REG2 {
> - regulator-name = "vcc3v3_sd";
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> - };
> -
> - codec {
> - mic-in-differential;
> - };
> - };
> -};
> -
> -&i2c3 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c3m1_xfer>;
> - status = "disabled";
> -};
> -
> -&i2c4 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c4m1_xfer>;
> - status = "disabled";
> -};
> -
> -&i2c5 {
> - status = "okay";
> -
> - hym8563: rtc at 51 {
> - compatible = "haoyu,hym8563";
> - reg = <0x51>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
> - #clock-cells = <0>;
> - clock-output-names = "rtcic_32kout";
> - pinctrl-names = "default";
> - pinctrl-0 = <&hym8563_int>;
> - wakeup-source;
> - };
> -};
> -
> -&i2s0_8ch {
> - status = "okay";
> -};
> -
> -&i2s1_8ch {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
> - rockchip,trcm-sync-tx-only;
> - status = "okay";
> -};
> -
> -&i2s2_2ch {
> - rockchip,trcm-sync-tx-only;
> - status = "okay";
> -};
> -
> -&mdio1 {
> - rgmii_phy1: ethernet-phy at 0 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <0x0>;
> - pinctrl-names = "default";
> - pinctrl-0 = <ð_phy_rst>;
> - reset-assert-us = <20000>;
> - reset-deassert-us = <100000>;
> - reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
> - };
> -};
> -
> -&pcie2x1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie_reset_h>;
> - reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_pcie>;
> - status = "okay";
> -};
> -
> -&pcie30phy {
> - phy-supply = <&vcc3v3_pi6c_03>;
> - status = "okay";
> -};
> -
> -&pcie3x2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie30x2m1_pins>;
> - reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
> - vpcie3v3-supply = <&vcc3v3_pcie>;
> - status = "okay";
> -};
> -
> -&pinctrl {
> - cam {
> - vcc_cam_en: vcc_cam_en {
> - rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - display {
> - vcc_mipi_en: vcc_mipi_en {
> - rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - ethernet {
> - eth_phy_rst: eth_phy_rst {
> - rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - hym8563 {
> - hym8563_int: hym8563-int {
> - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - leds {
> - led_user_en: led_user_en {
> - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pcie {
> - pcie_enable_h: pcie-enable-h {
> - rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - pcie_reset_h: pcie-reset-h {
> - rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pmic {
> - pmic_int: pmic_int {
> - rockchip,pins =
> - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - usb {
> - vcc5v0_usb_host_en: vcc5v0_usb_host_en {
> - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - vcc5v0_usb_hub_en: vcc5v0_usb_hub_en {
> - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
> - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - bt {
> - bt_enable: bt-enable {
> - rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> -
> - bt_host_wake: bt-host-wake {
> - rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
> - };
> -
> - bt_wake: bt-wake {
> - rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - sdio-pwrseq {
> - wifi_enable: wifi-enable {
> - rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -&pmu_io_domains {
> - pmuio1-supply = <&vcc3v3_pmu>;
> - pmuio2-supply = <&vcc3v3_pmu>;
> - vccio1-supply = <&vccio_acodec>;
> - vccio2-supply = <&vcc_1v8>;
> - vccio3-supply = <&vccio_sd>;
> - vccio4-supply = <&vcc_1v8>;
> - vccio5-supply = <&vcc_3v3>;
> - vccio6-supply = <&vcc_1v8>;
> - vccio7-supply = <&vcc_3v3>;
> - status = "okay";
> -};
> -
> -&saradc {
> - vref-supply = <&vcca_1v8>;
> - status = "okay";
> -};
> -
> -&sdhci {
> - bus-width = <8>;
> - max-frequency = <200000000>;
> - non-removable;
> - pinctrl-names = "default";
> - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
> - vmmc-supply = <&vcc_3v3>;
> - vqmmc-supply = <&vcc_1v8>;
> - status = "okay";
> -};
> -
> -&sdmmc0 {
> - bus-width = <4>;
> - cap-sd-highspeed;
> - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> - disable-wp;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> - sd-uhs-sdr50;
> - vmmc-supply = <&vcc3v3_sd>;
> - vqmmc-supply = <&vccio_sd>;
> - status = "okay";
> -};
> -
> -&sdmmc2 {
> - bus-width = <4>;
> - disable-wp;
> - cap-sd-highspeed;
> - cap-sdio-irq;
> - keep-power-in-suspend;
> - mmc-pwrseq = <&sdio_pwrseq>;
> - non-removable;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
> - sd-uhs-sdr12;
> - sd-uhs-sdr25;
> - sd-uhs-sdr50;
> - sd-uhs-sdr104;
> - vmmc-supply = <&vcc3v3_sys>;
> - vqmmc-supply = <&vcc_1v8>;
> - status = "okay";
> -};
> -
> -&tsadc {
> - rockchip,hw-tshut-mode = <1>;
> - rockchip,hw-tshut-polarity = <0>;
> - status = "okay";
> -};
> -
> -&uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
> - uart-has-rtscts;
> - status = "okay";
> -
> - bluetooth {
> - compatible = "brcm,bcm43438-bt";
> - clocks = <&rk809 1>;
> - clock-names = "lpo";
> - device-wakeup-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
> - host-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
> - shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>;
> - vbat-supply = <&vcc3v3_sys>;
> - vddio-supply = <&vcc_1v8>;
> - /* vddio comes from regulator on module, use IO bank voltage instead */
> - };
> -};
> -
> -&uart2 {
> - status = "okay";
> -};
> -
> -&usb_host0_ehci {
> - status = "okay";
> -};
> -
> -&usb_host0_ohci {
> - status = "okay";
> -};
> -
> -&usb_host0_xhci {
> - extcon = <&usb2phy0>;
> - status = "okay";
> -};
> -
> -&usb_host1_ehci {
> - status = "okay";
> -};
> -
> -&usb_host1_ohci {
> - status = "okay";
> -};
> -
> -&usb_host1_xhci {
> - status = "okay";
> -};
> -
> -&usb2phy0 {
> - status = "okay";
> -};
> -
> -&usb2phy0_host {
> - phy-supply = <&vcc5v0_usb_host>;
> - status = "okay";
> -};
> -
> -&usb2phy0_otg {
> - phy-supply = <&vcc5v0_usb_otg>;
> - status = "okay";
> -};
> -
> -&usb2phy1 {
> - status = "okay";
> -};
> -
> -&usb2phy1_host {
> - phy-supply = <&vcc5v0_usb_host>;
> - status = "okay";
> -};
> -
> -&usb2phy1_otg {
> - phy-supply = <&vcc5v0_usb_host>;
> - status = "okay";
> -};
> -
> -&vop {
> - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> - status = "okay";
> -};
> -
> -&vop_mmu {
> - status = "okay";
> -};
> -
> -&vp0 {
> - vp0_out_hdmi: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
> - reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> - remote-endpoint = <&hdmi_in_vp0>;
> - };
> -};
> diff --git a/arch/arm/dts/rk3568.dtsi b/arch/arm/dts/rk3568.dtsi
> deleted file mode 100644
> index f1be76a54ceb..000000000000
> --- a/arch/arm/dts/rk3568.dtsi
> +++ /dev/null
> @@ -1,267 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> - */
> -
> -#include "rk356x.dtsi"
> -
> -/ {
> - compatible = "rockchip,rk3568";
> -
> - sata0: sata at fc000000 {
> - compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
> - reg = <0 0xfc000000 0 0x1000>;
> - clocks = <&cru ACLK_SATA0>, <&cru CLK_SATA0_PMALIVE>,
> - <&cru CLK_SATA0_RXOOB>;
> - clock-names = "sata", "pmalive", "rxoob";
> - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> - phys = <&combphy0 PHY_TYPE_SATA>;
> - phy-names = "sata-phy";
> - ports-implemented = <0x1>;
> - power-domains = <&power RK3568_PD_PIPE>;
> - status = "disabled";
> - };
> -
> - pipe_phy_grf0: syscon at fdc70000 {
> - compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
> - reg = <0x0 0xfdc70000 0x0 0x1000>;
> - };
> -
> - qos_pcie3x1: qos at fe190080 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe190080 0x0 0x20>;
> - };
> -
> - qos_pcie3x2: qos at fe190100 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe190100 0x0 0x20>;
> - };
> -
> - qos_sata0: qos at fe190200 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe190200 0x0 0x20>;
> - };
> -
> - pcie30_phy_grf: syscon at fdcb8000 {
> - compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon";
> - reg = <0x0 0xfdcb8000 0x0 0x10000>;
> - };
> -
> - pcie30phy: phy at fe8c0000 {
> - compatible = "rockchip,rk3568-pcie3-phy";
> - reg = <0x0 0xfe8c0000 0x0 0x20000>;
> - #phy-cells = <0>;
> - clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>,
> - <&cru PCLK_PCIE30PHY>;
> - clock-names = "refclk_m", "refclk_n", "pclk";
> - resets = <&cru SRST_PCIE30PHY>;
> - reset-names = "phy";
> - rockchip,phy-grf = <&pcie30_phy_grf>;
> - status = "disabled";
> - };
> -
> - pcie3x1: pcie at fe270000 {
> - compatible = "rockchip,rk3568-pcie";
> - #address-cells = <3>;
> - #size-cells = <2>;
> - bus-range = <0x0 0xf>;
> - clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>,
> - <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>,
> - <&cru CLK_PCIE30X1_AUX_NDFT>;
> - clock-names = "aclk_mst", "aclk_slv",
> - "aclk_dbi", "pclk", "aux";
> - device_type = "pci";
> - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "sys", "pmc", "msg", "legacy", "err";
> - #interrupt-cells = <1>;
> - interrupt-map-mask = <0 0 0 7>;
> - interrupt-map = <0 0 0 1 &pcie3x1_intc 0>,
> - <0 0 0 2 &pcie3x1_intc 1>,
> - <0 0 0 3 &pcie3x1_intc 2>,
> - <0 0 0 4 &pcie3x1_intc 3>;
> - linux,pci-domain = <1>;
> - num-ib-windows = <6>;
> - num-ob-windows = <2>;
> - max-link-speed = <3>;
> - msi-map = <0x0 &gic 0x1000 0x1000>;
> - num-lanes = <1>;
> - phys = <&pcie30phy>;
> - phy-names = "pcie-phy";
> - power-domains = <&power RK3568_PD_PIPE>;
> - reg = <0x3 0xc0400000 0x0 0x00400000>,
> - <0x0 0xfe270000 0x0 0x00010000>,
> - <0x0 0xf2000000 0x0 0x00100000>;
> - ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
> - <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x01e00000>,
> - <0x03000000 0x0 0x40000000 0x3 0x40000000 0x0 0x40000000>;
> - reg-names = "dbi", "apb", "config";
> - resets = <&cru SRST_PCIE30X1_POWERUP>;
> - reset-names = "pipe";
> - /* bifurcation; lane1 when using 1+1 */
> - status = "disabled";
> -
> - pcie3x1_intc: legacy-interrupt-controller {
> - interrupt-controller;
> - #address-cells = <0>;
> - #interrupt-cells = <1>;
> - interrupt-parent = <&gic>;
> - interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
> - };
> - };
> -
> - pcie3x2: pcie at fe280000 {
> - compatible = "rockchip,rk3568-pcie";
> - #address-cells = <3>;
> - #size-cells = <2>;
> - bus-range = <0x0 0xf>;
> - clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>,
> - <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>,
> - <&cru CLK_PCIE30X2_AUX_NDFT>;
> - clock-names = "aclk_mst", "aclk_slv",
> - "aclk_dbi", "pclk", "aux";
> - device_type = "pci";
> - interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "sys", "pmc", "msg", "legacy", "err";
> - #interrupt-cells = <1>;
> - interrupt-map-mask = <0 0 0 7>;
> - interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
> - <0 0 0 2 &pcie3x2_intc 1>,
> - <0 0 0 3 &pcie3x2_intc 2>,
> - <0 0 0 4 &pcie3x2_intc 3>;
> - linux,pci-domain = <2>;
> - num-ib-windows = <6>;
> - num-ob-windows = <2>;
> - max-link-speed = <3>;
> - msi-map = <0x0 &gic 0x2000 0x1000>;
> - num-lanes = <2>;
> - phys = <&pcie30phy>;
> - phy-names = "pcie-phy";
> - power-domains = <&power RK3568_PD_PIPE>;
> - reg = <0x3 0xc0800000 0x0 0x00400000>,
> - <0x0 0xfe280000 0x0 0x00010000>,
> - <0x0 0xf0000000 0x0 0x00100000>;
> - ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
> - <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x01e00000>,
> - <0x03000000 0x0 0x40000000 0x3 0x80000000 0x0 0x40000000>;
> - reg-names = "dbi", "apb", "config";
> - resets = <&cru SRST_PCIE30X2_POWERUP>;
> - reset-names = "pipe";
> - /* bifurcation; lane0 when using 1+1 */
> - status = "disabled";
> -
> - pcie3x2_intc: legacy-interrupt-controller {
> - interrupt-controller;
> - #address-cells = <0>;
> - #interrupt-cells = <1>;
> - interrupt-parent = <&gic>;
> - interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
> - };
> - };
> -
> - gmac0: ethernet at fe2a0000 {
> - compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
> - reg = <0x0 0xfe2a0000 0x0 0x10000>;
> - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "macirq", "eth_wake_irq";
> - clocks = <&cru SCLK_GMAC0>, <&cru SCLK_GMAC0_RX_TX>,
> - <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_MAC0_REFOUT>,
> - <&cru ACLK_GMAC0>, <&cru PCLK_GMAC0>,
> - <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_GMAC0_PTP_REF>;
> - clock-names = "stmmaceth", "mac_clk_rx",
> - "mac_clk_tx", "clk_mac_refout",
> - "aclk_mac", "pclk_mac",
> - "clk_mac_speed", "ptp_ref";
> - resets = <&cru SRST_A_GMAC0>;
> - reset-names = "stmmaceth";
> - rockchip,grf = <&grf>;
> - snps,axi-config = <&gmac0_stmmac_axi_setup>;
> - snps,mixed-burst;
> - snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
> - snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
> - snps,tso;
> - status = "disabled";
> -
> - mdio0: mdio {
> - compatible = "snps,dwmac-mdio";
> - #address-cells = <0x1>;
> - #size-cells = <0x0>;
> - };
> -
> - gmac0_stmmac_axi_setup: stmmac-axi-config {
> - snps,blen = <0 0 0 0 16 8 4>;
> - snps,rd_osr_lmt = <8>;
> - snps,wr_osr_lmt = <4>;
> - };
> -
> - gmac0_mtl_rx_setup: rx-queues-config {
> - snps,rx-queues-to-use = <1>;
> - queue0 {};
> - };
> -
> - gmac0_mtl_tx_setup: tx-queues-config {
> - snps,tx-queues-to-use = <1>;
> - queue0 {};
> - };
> - };
> -
> - combphy0: phy at fe820000 {
> - compatible = "rockchip,rk3568-naneng-combphy";
> - reg = <0x0 0xfe820000 0x0 0x100>;
> - clocks = <&pmucru CLK_PCIEPHY0_REF>,
> - <&cru PCLK_PIPEPHY0>,
> - <&cru PCLK_PIPE>;
> - clock-names = "ref", "apb", "pipe";
> - assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
> - assigned-clock-rates = <100000000>;
> - resets = <&cru SRST_PIPEPHY0>;
> - rockchip,pipe-grf = <&pipegrf>;
> - rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
> - #phy-cells = <1>;
> - status = "disabled";
> - };
> -};
> -
> -&cpu0_opp_table {
> - opp-1992000000 {
> - opp-hz = /bits/ 64 <1992000000>;
> - opp-microvolt = <1150000 1150000 1150000>;
> - };
> -};
> -
> -&pipegrf {
> - compatible = "rockchip,rk3568-pipe-grf", "syscon";
> -};
> -
> -&power {
> - power-domain at RK3568_PD_PIPE {
> - reg = <RK3568_PD_PIPE>;
> - clocks = <&cru PCLK_PIPE>;
> - pm_qos = <&qos_pcie2x1>,
> - <&qos_pcie3x1>,
> - <&qos_pcie3x2>,
> - <&qos_sata0>,
> - <&qos_sata1>,
> - <&qos_sata2>,
> - <&qos_usb3_0>,
> - <&qos_usb3_1>;
> - #power-domain-cells = <0>;
> - };
> -};
> -
> -&usb_host0_xhci {
> - phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>;
> - phy-names = "usb2-phy", "usb3-phy";
> -};
> -
> -&vop {
> - compatible = "rockchip,rk3568-vop";
> -};
> diff --git a/arch/arm/dts/rk356x.dtsi b/arch/arm/dts/rk356x.dtsi
> deleted file mode 100644
> index c19c0f1b3778..000000000000
> --- a/arch/arm/dts/rk356x.dtsi
> +++ /dev/null
> @@ -1,1886 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> - */
> -
> -#include <dt-bindings/clock/rk3568-cru.h>
> -#include <dt-bindings/interrupt-controller/arm-gic.h>
> -#include <dt-bindings/interrupt-controller/irq.h>
> -#include <dt-bindings/phy/phy.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include <dt-bindings/power/rk3568-power.h>
> -#include <dt-bindings/soc/rockchip,boot-mode.h>
> -#include <dt-bindings/thermal/thermal.h>
> -
> -/ {
> - interrupt-parent = <&gic>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> -
> - aliases {
> - gpio0 = &gpio0;
> - gpio1 = &gpio1;
> - gpio2 = &gpio2;
> - gpio3 = &gpio3;
> - gpio4 = &gpio4;
> - i2c0 = &i2c0;
> - i2c1 = &i2c1;
> - i2c2 = &i2c2;
> - i2c3 = &i2c3;
> - i2c4 = &i2c4;
> - i2c5 = &i2c5;
> - serial0 = &uart0;
> - serial1 = &uart1;
> - serial2 = &uart2;
> - serial3 = &uart3;
> - serial4 = &uart4;
> - serial5 = &uart5;
> - serial6 = &uart6;
> - serial7 = &uart7;
> - serial8 = &uart8;
> - serial9 = &uart9;
> - spi0 = &spi0;
> - spi1 = &spi1;
> - spi2 = &spi2;
> - spi3 = &spi3;
> - };
> -
> - cpus {
> - #address-cells = <2>;
> - #size-cells = <0>;
> -
> - cpu0: cpu at 0 {
> - device_type = "cpu";
> - compatible = "arm,cortex-a55";
> - reg = <0x0 0x0>;
> - clocks = <&scmi_clk 0>;
> - #cooling-cells = <2>;
> - enable-method = "psci";
> - operating-points-v2 = <&cpu0_opp_table>;
> - };
> -
> - cpu1: cpu at 100 {
> - device_type = "cpu";
> - compatible = "arm,cortex-a55";
> - reg = <0x0 0x100>;
> - #cooling-cells = <2>;
> - enable-method = "psci";
> - operating-points-v2 = <&cpu0_opp_table>;
> - };
> -
> - cpu2: cpu at 200 {
> - device_type = "cpu";
> - compatible = "arm,cortex-a55";
> - reg = <0x0 0x200>;
> - #cooling-cells = <2>;
> - enable-method = "psci";
> - operating-points-v2 = <&cpu0_opp_table>;
> - };
> -
> - cpu3: cpu at 300 {
> - device_type = "cpu";
> - compatible = "arm,cortex-a55";
> - reg = <0x0 0x300>;
> - #cooling-cells = <2>;
> - enable-method = "psci";
> - operating-points-v2 = <&cpu0_opp_table>;
> - };
> - };
> -
> - cpu0_opp_table: opp-table-0 {
> - compatible = "operating-points-v2";
> - opp-shared;
> -
> - opp-408000000 {
> - opp-hz = /bits/ 64 <408000000>;
> - opp-microvolt = <900000 900000 1150000>;
> - clock-latency-ns = <40000>;
> - };
> -
> - opp-600000000 {
> - opp-hz = /bits/ 64 <600000000>;
> - opp-microvolt = <900000 900000 1150000>;
> - };
> -
> - opp-816000000 {
> - opp-hz = /bits/ 64 <816000000>;
> - opp-microvolt = <900000 900000 1150000>;
> - opp-suspend;
> - };
> -
> - opp-1104000000 {
> - opp-hz = /bits/ 64 <1104000000>;
> - opp-microvolt = <900000 900000 1150000>;
> - };
> -
> - opp-1416000000 {
> - opp-hz = /bits/ 64 <1416000000>;
> - opp-microvolt = <900000 900000 1150000>;
> - };
> -
> - opp-1608000000 {
> - opp-hz = /bits/ 64 <1608000000>;
> - opp-microvolt = <975000 975000 1150000>;
> - };
> -
> - opp-1800000000 {
> - opp-hz = /bits/ 64 <1800000000>;
> - opp-microvolt = <1050000 1050000 1150000>;
> - };
> - };
> -
> - display_subsystem: display-subsystem {
> - compatible = "rockchip,display-subsystem";
> - ports = <&vop_out>;
> - };
> -
> - firmware {
> - scmi: scmi {
> - compatible = "arm,scmi-smc";
> - arm,smc-id = <0x82000010>;
> - shmem = <&scmi_shmem>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - scmi_clk: protocol at 14 {
> - reg = <0x14>;
> - #clock-cells = <1>;
> - };
> - };
> - };
> -
> - gpu_opp_table: opp-table-1 {
> - compatible = "operating-points-v2";
> -
> - opp-200000000 {
> - opp-hz = /bits/ 64 <200000000>;
> - opp-microvolt = <825000>;
> - };
> -
> - opp-300000000 {
> - opp-hz = /bits/ 64 <300000000>;
> - opp-microvolt = <825000>;
> - };
> -
> - opp-400000000 {
> - opp-hz = /bits/ 64 <400000000>;
> - opp-microvolt = <825000>;
> - };
> -
> - opp-600000000 {
> - opp-hz = /bits/ 64 <600000000>;
> - opp-microvolt = <825000>;
> - };
> -
> - opp-700000000 {
> - opp-hz = /bits/ 64 <700000000>;
> - opp-microvolt = <900000>;
> - };
> -
> - opp-800000000 {
> - opp-hz = /bits/ 64 <800000000>;
> - opp-microvolt = <1000000>;
> - };
> - };
> -
> - hdmi_sound: hdmi-sound {
> - compatible = "simple-audio-card";
> - simple-audio-card,name = "HDMI";
> - simple-audio-card,format = "i2s";
> - simple-audio-card,mclk-fs = <256>;
> - status = "disabled";
> -
> - simple-audio-card,codec {
> - sound-dai = <&hdmi>;
> - };
> -
> - simple-audio-card,cpu {
> - sound-dai = <&i2s0_8ch>;
> - };
> - };
> -
> - pmu {
> - compatible = "arm,cortex-a55-pmu";
> - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> - };
> -
> - psci {
> - compatible = "arm,psci-1.0";
> - method = "smc";
> - };
> -
> - timer {
> - compatible = "arm,armv8-timer";
> - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
> - arm,no-tick-in-suspend;
> - };
> -
> - xin24m: xin24m {
> - compatible = "fixed-clock";
> - clock-frequency = <24000000>;
> - clock-output-names = "xin24m";
> - #clock-cells = <0>;
> - };
> -
> - xin32k: xin32k {
> - compatible = "fixed-clock";
> - clock-frequency = <32768>;
> - clock-output-names = "xin32k";
> - pinctrl-0 = <&clk32k_out0>;
> - pinctrl-names = "default";
> - #clock-cells = <0>;
> - };
> -
> - sram at 10f000 {
> - compatible = "mmio-sram";
> - reg = <0x0 0x0010f000 0x0 0x100>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x0 0x0010f000 0x100>;
> -
> - scmi_shmem: sram at 0 {
> - compatible = "arm,scmi-shmem";
> - reg = <0x0 0x100>;
> - };
> - };
> -
> - sata1: sata at fc400000 {
> - compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
> - reg = <0 0xfc400000 0 0x1000>;
> - clocks = <&cru ACLK_SATA1>, <&cru CLK_SATA1_PMALIVE>,
> - <&cru CLK_SATA1_RXOOB>;
> - clock-names = "sata", "pmalive", "rxoob";
> - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> - phys = <&combphy1 PHY_TYPE_SATA>;
> - phy-names = "sata-phy";
> - ports-implemented = <0x1>;
> - power-domains = <&power RK3568_PD_PIPE>;
> - status = "disabled";
> - };
> -
> - sata2: sata at fc800000 {
> - compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
> - reg = <0 0xfc800000 0 0x1000>;
> - clocks = <&cru ACLK_SATA2>, <&cru CLK_SATA2_PMALIVE>,
> - <&cru CLK_SATA2_RXOOB>;
> - clock-names = "sata", "pmalive", "rxoob";
> - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> - phys = <&combphy2 PHY_TYPE_SATA>;
> - phy-names = "sata-phy";
> - ports-implemented = <0x1>;
> - power-domains = <&power RK3568_PD_PIPE>;
> - status = "disabled";
> - };
> -
> - usb_host0_xhci: usb at fcc00000 {
> - compatible = "rockchip,rk3568-dwc3", "snps,dwc3";
> - reg = <0x0 0xfcc00000 0x0 0x400000>;
> - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru CLK_USB3OTG0_REF>, <&cru CLK_USB3OTG0_SUSPEND>,
> - <&cru ACLK_USB3OTG0>;
> - clock-names = "ref_clk", "suspend_clk",
> - "bus_clk";
> - dr_mode = "otg";
> - phy_type = "utmi_wide";
> - power-domains = <&power RK3568_PD_PIPE>;
> - resets = <&cru SRST_USB3OTG0>;
> - snps,dis_u2_susphy_quirk;
> - status = "disabled";
> - };
> -
> - usb_host1_xhci: usb at fd000000 {
> - compatible = "rockchip,rk3568-dwc3", "snps,dwc3";
> - reg = <0x0 0xfd000000 0x0 0x400000>;
> - interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru CLK_USB3OTG1_REF>, <&cru CLK_USB3OTG1_SUSPEND>,
> - <&cru ACLK_USB3OTG1>;
> - clock-names = "ref_clk", "suspend_clk",
> - "bus_clk";
> - dr_mode = "host";
> - phys = <&usb2phy0_host>, <&combphy1 PHY_TYPE_USB3>;
> - phy-names = "usb2-phy", "usb3-phy";
> - phy_type = "utmi_wide";
> - power-domains = <&power RK3568_PD_PIPE>;
> - resets = <&cru SRST_USB3OTG1>;
> - snps,dis_u2_susphy_quirk;
> - status = "disabled";
> - };
> -
> - gic: interrupt-controller at fd400000 {
> - compatible = "arm,gic-v3";
> - reg = <0x0 0xfd400000 0 0x10000>, /* GICD */
> - <0x0 0xfd460000 0 0x80000>; /* GICR */
> - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-controller;
> - #interrupt-cells = <3>;
> - mbi-alias = <0x0 0xfd410000>;
> - mbi-ranges = <296 24>;
> - msi-controller;
> - };
> -
> - usb_host0_ehci: usb at fd800000 {
> - compatible = "generic-ehci";
> - reg = <0x0 0xfd800000 0x0 0x40000>;
> - interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
> - <&cru PCLK_USB>;
> - phys = <&usb2phy1_otg>;
> - phy-names = "usb";
> - status = "disabled";
> - };
> -
> - usb_host0_ohci: usb at fd840000 {
> - compatible = "generic-ohci";
> - reg = <0x0 0xfd840000 0x0 0x40000>;
> - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
> - <&cru PCLK_USB>;
> - phys = <&usb2phy1_otg>;
> - phy-names = "usb";
> - status = "disabled";
> - };
> -
> - usb_host1_ehci: usb at fd880000 {
> - compatible = "generic-ehci";
> - reg = <0x0 0xfd880000 0x0 0x40000>;
> - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
> - <&cru PCLK_USB>;
> - phys = <&usb2phy1_host>;
> - phy-names = "usb";
> - status = "disabled";
> - };
> -
> - usb_host1_ohci: usb at fd8c0000 {
> - compatible = "generic-ohci";
> - reg = <0x0 0xfd8c0000 0x0 0x40000>;
> - interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
> - <&cru PCLK_USB>;
> - phys = <&usb2phy1_host>;
> - phy-names = "usb";
> - status = "disabled";
> - };
> -
> - pmugrf: syscon at fdc20000 {
> - compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd";
> - reg = <0x0 0xfdc20000 0x0 0x10000>;
> -
> - pmu_io_domains: io-domains {
> - compatible = "rockchip,rk3568-pmu-io-voltage-domain";
> - status = "disabled";
> - };
> - };
> -
> - pipegrf: syscon at fdc50000 {
> - reg = <0x0 0xfdc50000 0x0 0x1000>;
> - };
> -
> - grf: syscon at fdc60000 {
> - compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
> - reg = <0x0 0xfdc60000 0x0 0x10000>;
> - };
> -
> - pipe_phy_grf1: syscon at fdc80000 {
> - compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
> - reg = <0x0 0xfdc80000 0x0 0x1000>;
> - };
> -
> - pipe_phy_grf2: syscon at fdc90000 {
> - compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
> - reg = <0x0 0xfdc90000 0x0 0x1000>;
> - };
> -
> - usb2phy0_grf: syscon at fdca0000 {
> - compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
> - reg = <0x0 0xfdca0000 0x0 0x8000>;
> - };
> -
> - usb2phy1_grf: syscon at fdca8000 {
> - compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
> - reg = <0x0 0xfdca8000 0x0 0x8000>;
> - };
> -
> - pmucru: clock-controller at fdd00000 {
> - compatible = "rockchip,rk3568-pmucru";
> - reg = <0x0 0xfdd00000 0x0 0x1000>;
> - #clock-cells = <1>;
> - #reset-cells = <1>;
> - };
> -
> - cru: clock-controller at fdd20000 {
> - compatible = "rockchip,rk3568-cru";
> - reg = <0x0 0xfdd20000 0x0 0x1000>;
> - clocks = <&xin24m>;
> - clock-names = "xin24m";
> - #clock-cells = <1>;
> - #reset-cells = <1>;
> - assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, <&pmucru PLL_PPLL>;
> - assigned-clock-rates = <32768>, <1200000000>, <200000000>;
> - assigned-clock-parents = <&pmucru CLK_RTC32K_FRAC>;
> - rockchip,grf = <&grf>;
> - };
> -
> - i2c0: i2c at fdd40000 {
> - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
> - reg = <0x0 0xfdd40000 0x0 0x1000>;
> - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>;
> - clock-names = "i2c", "pclk";
> - pinctrl-0 = <&i2c0_xfer>;
> - pinctrl-names = "default";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> -
> - uart0: serial at fdd50000 {
> - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> - reg = <0x0 0xfdd50000 0x0 0x100>;
> - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>;
> - clock-names = "baudclk", "apb_pclk";
> - dmas = <&dmac0 0>, <&dmac0 1>;
> - pinctrl-0 = <&uart0_xfer>;
> - pinctrl-names = "default";
> - reg-io-width = <4>;
> - reg-shift = <2>;
> - status = "disabled";
> - };
> -
> - pwm0: pwm at fdd70000 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfdd70000 0x0 0x10>;
> - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm0m0_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - pwm1: pwm at fdd70010 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfdd70010 0x0 0x10>;
> - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm1m0_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - pwm2: pwm at fdd70020 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfdd70020 0x0 0x10>;
> - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm2m0_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - pwm3: pwm at fdd70030 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfdd70030 0x0 0x10>;
> - clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm3_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - pmu: power-management at fdd90000 {
> - compatible = "rockchip,rk3568-pmu", "syscon", "simple-mfd";
> - reg = <0x0 0xfdd90000 0x0 0x1000>;
> -
> - power: power-controller {
> - compatible = "rockchip,rk3568-power-controller";
> - #power-domain-cells = <1>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - /* These power domains are grouped by VD_GPU */
> - power-domain at RK3568_PD_GPU {
> - reg = <RK3568_PD_GPU>;
> - clocks = <&cru ACLK_GPU_PRE>,
> - <&cru PCLK_GPU_PRE>;
> - pm_qos = <&qos_gpu>;
> - #power-domain-cells = <0>;
> - };
> -
> - /* These power domains are grouped by VD_LOGIC */
> - power-domain at RK3568_PD_VI {
> - reg = <RK3568_PD_VI>;
> - clocks = <&cru HCLK_VI>,
> - <&cru PCLK_VI>;
> - pm_qos = <&qos_isp>,
> - <&qos_vicap0>,
> - <&qos_vicap1>;
> - #power-domain-cells = <0>;
> - };
> -
> - power-domain at RK3568_PD_VO {
> - reg = <RK3568_PD_VO>;
> - clocks = <&cru HCLK_VO>,
> - <&cru PCLK_VO>,
> - <&cru ACLK_VOP_PRE>;
> - pm_qos = <&qos_hdcp>,
> - <&qos_vop_m0>,
> - <&qos_vop_m1>;
> - #power-domain-cells = <0>;
> - };
> -
> - power-domain at RK3568_PD_RGA {
> - reg = <RK3568_PD_RGA>;
> - clocks = <&cru HCLK_RGA_PRE>,
> - <&cru PCLK_RGA_PRE>;
> - pm_qos = <&qos_ebc>,
> - <&qos_iep>,
> - <&qos_jpeg_dec>,
> - <&qos_jpeg_enc>,
> - <&qos_rga_rd>,
> - <&qos_rga_wr>;
> - #power-domain-cells = <0>;
> - };
> -
> - power-domain at RK3568_PD_VPU {
> - reg = <RK3568_PD_VPU>;
> - clocks = <&cru HCLK_VPU_PRE>;
> - pm_qos = <&qos_vpu>;
> - #power-domain-cells = <0>;
> - };
> -
> - power-domain at RK3568_PD_RKVDEC {
> - clocks = <&cru HCLK_RKVDEC_PRE>;
> - reg = <RK3568_PD_RKVDEC>;
> - pm_qos = <&qos_rkvdec>;
> - #power-domain-cells = <0>;
> - };
> -
> - power-domain at RK3568_PD_RKVENC {
> - reg = <RK3568_PD_RKVENC>;
> - clocks = <&cru HCLK_RKVENC_PRE>;
> - pm_qos = <&qos_rkvenc_rd_m0>,
> - <&qos_rkvenc_rd_m1>,
> - <&qos_rkvenc_wr_m0>;
> - #power-domain-cells = <0>;
> - };
> - };
> - };
> -
> - gpu: gpu at fde60000 {
> - compatible = "rockchip,rk3568-mali", "arm,mali-bifrost";
> - reg = <0x0 0xfde60000 0x0 0x4000>;
> - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "job", "mmu", "gpu";
> - clocks = <&scmi_clk 1>, <&cru CLK_GPU>;
> - clock-names = "gpu", "bus";
> - #cooling-cells = <2>;
> - operating-points-v2 = <&gpu_opp_table>;
> - power-domains = <&power RK3568_PD_GPU>;
> - status = "disabled";
> - };
> -
> - vpu: video-codec at fdea0400 {
> - compatible = "rockchip,rk3568-vpu";
> - reg = <0x0 0xfdea0000 0x0 0x800>;
> - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
> - clock-names = "aclk", "hclk";
> - iommus = <&vdpu_mmu>;
> - power-domains = <&power RK3568_PD_VPU>;
> - };
> -
> - vdpu_mmu: iommu at fdea0800 {
> - compatible = "rockchip,rk3568-iommu";
> - reg = <0x0 0xfdea0800 0x0 0x40>;
> - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> - clock-names = "aclk", "iface";
> - clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
> - power-domains = <&power RK3568_PD_VPU>;
> - #iommu-cells = <0>;
> - };
> -
> - rga: rga at fdeb0000 {
> - compatible = "rockchip,rk3568-rga", "rockchip,rk3288-rga";
> - reg = <0x0 0xfdeb0000 0x0 0x180>;
> - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru CLK_RGA_CORE>;
> - clock-names = "aclk", "hclk", "sclk";
> - resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
> - reset-names = "core", "axi", "ahb";
> - power-domains = <&power RK3568_PD_RGA>;
> - };
> -
> - vepu: video-codec at fdee0000 {
> - compatible = "rockchip,rk3568-vepu";
> - reg = <0x0 0xfdee0000 0x0 0x800>;
> - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>;
> - clock-names = "aclk", "hclk";
> - iommus = <&vepu_mmu>;
> - power-domains = <&power RK3568_PD_RGA>;
> - };
> -
> - vepu_mmu: iommu at fdee0800 {
> - compatible = "rockchip,rk3568-iommu";
> - reg = <0x0 0xfdee0800 0x0 0x40>;
> - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>;
> - clock-names = "aclk", "iface";
> - power-domains = <&power RK3568_PD_RGA>;
> - #iommu-cells = <0>;
> - };
> -
> - sdmmc2: mmc at fe000000 {
> - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
> - reg = <0x0 0xfe000000 0x0 0x4000>;
> - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>,
> - <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>;
> - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> - fifo-depth = <0x100>;
> - max-frequency = <150000000>;
> - resets = <&cru SRST_SDMMC2>;
> - reset-names = "reset";
> - status = "disabled";
> - };
> -
> - gmac1: ethernet at fe010000 {
> - compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
> - reg = <0x0 0xfe010000 0x0 0x10000>;
> - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "macirq", "eth_wake_irq";
> - clocks = <&cru SCLK_GMAC1>, <&cru SCLK_GMAC1_RX_TX>,
> - <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_MAC1_REFOUT>,
> - <&cru ACLK_GMAC1>, <&cru PCLK_GMAC1>,
> - <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_GMAC1_PTP_REF>;
> - clock-names = "stmmaceth", "mac_clk_rx",
> - "mac_clk_tx", "clk_mac_refout",
> - "aclk_mac", "pclk_mac",
> - "clk_mac_speed", "ptp_ref";
> - resets = <&cru SRST_A_GMAC1>;
> - reset-names = "stmmaceth";
> - rockchip,grf = <&grf>;
> - snps,axi-config = <&gmac1_stmmac_axi_setup>;
> - snps,mixed-burst;
> - snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
> - snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
> - snps,tso;
> - status = "disabled";
> -
> - mdio1: mdio {
> - compatible = "snps,dwmac-mdio";
> - #address-cells = <0x1>;
> - #size-cells = <0x0>;
> - };
> -
> - gmac1_stmmac_axi_setup: stmmac-axi-config {
> - snps,blen = <0 0 0 0 16 8 4>;
> - snps,rd_osr_lmt = <8>;
> - snps,wr_osr_lmt = <4>;
> - };
> -
> - gmac1_mtl_rx_setup: rx-queues-config {
> - snps,rx-queues-to-use = <1>;
> - queue0 {};
> - };
> -
> - gmac1_mtl_tx_setup: tx-queues-config {
> - snps,tx-queues-to-use = <1>;
> - queue0 {};
> - };
> - };
> -
> - vop: vop at fe040000 {
> - reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
> - reg-names = "vop", "gamma-lut";
> - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>,
> - <&cru DCLK_VOP1>, <&cru DCLK_VOP2>;
> - clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2";
> - iommus = <&vop_mmu>;
> - power-domains = <&power RK3568_PD_VO>;
> - rockchip,grf = <&grf>;
> - status = "disabled";
> -
> - vop_out: ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - vp0: port at 0 {
> - reg = <0>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - vp1: port at 1 {
> - reg = <1>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - vp2: port at 2 {
> - reg = <2>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> - };
> - };
> -
> - vop_mmu: iommu at fe043e00 {
> - compatible = "rockchip,rk3568-iommu";
> - reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>;
> - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
> - clock-names = "aclk", "iface";
> - #iommu-cells = <0>;
> - status = "disabled";
> - };
> -
> - dsi0: dsi at fe060000 {
> - compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi";
> - reg = <0x00 0xfe060000 0x00 0x10000>;
> - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
> - clock-names = "pclk";
> - clocks = <&cru PCLK_DSITX_0>;
> - phy-names = "dphy";
> - phys = <&dsi_dphy0>;
> - power-domains = <&power RK3568_PD_VO>;
> - reset-names = "apb";
> - resets = <&cru SRST_P_DSITX_0>;
> - rockchip,grf = <&grf>;
> - status = "disabled";
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - dsi0_in: port at 0 {
> - reg = <0>;
> - };
> -
> - dsi0_out: port at 1 {
> - reg = <1>;
> - };
> - };
> - };
> -
> - dsi1: dsi at fe070000 {
> - compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi";
> - reg = <0x0 0xfe070000 0x0 0x10000>;
> - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> - clock-names = "pclk";
> - clocks = <&cru PCLK_DSITX_1>;
> - phy-names = "dphy";
> - phys = <&dsi_dphy1>;
> - power-domains = <&power RK3568_PD_VO>;
> - reset-names = "apb";
> - resets = <&cru SRST_P_DSITX_1>;
> - rockchip,grf = <&grf>;
> - status = "disabled";
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - dsi1_in: port at 0 {
> - reg = <0>;
> - };
> -
> - dsi1_out: port at 1 {
> - reg = <1>;
> - };
> - };
> - };
> -
> - hdmi: hdmi at fe0a0000 {
> - compatible = "rockchip,rk3568-dw-hdmi";
> - reg = <0x0 0xfe0a0000 0x0 0x20000>;
> - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru PCLK_HDMI_HOST>,
> - <&cru CLK_HDMI_SFR>,
> - <&cru CLK_HDMI_CEC>,
> - <&pmucru CLK_HDMI_REF>,
> - <&cru HCLK_VO>;
> - clock-names = "iahb", "isfr", "cec", "ref";
> - pinctrl-names = "default";
> - pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> - power-domains = <&power RK3568_PD_VO>;
> - reg-io-width = <4>;
> - rockchip,grf = <&grf>;
> - #sound-dai-cells = <0>;
> - status = "disabled";
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - hdmi_in: port at 0 {
> - reg = <0>;
> - };
> -
> - hdmi_out: port at 1 {
> - reg = <1>;
> - };
> - };
> - };
> -
> - qos_gpu: qos at fe128000 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe128000 0x0 0x20>;
> - };
> -
> - qos_rkvenc_rd_m0: qos at fe138080 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe138080 0x0 0x20>;
> - };
> -
> - qos_rkvenc_rd_m1: qos at fe138100 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe138100 0x0 0x20>;
> - };
> -
> - qos_rkvenc_wr_m0: qos at fe138180 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe138180 0x0 0x20>;
> - };
> -
> - qos_isp: qos at fe148000 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe148000 0x0 0x20>;
> - };
> -
> - qos_vicap0: qos at fe148080 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe148080 0x0 0x20>;
> - };
> -
> - qos_vicap1: qos at fe148100 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe148100 0x0 0x20>;
> - };
> -
> - qos_vpu: qos at fe150000 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe150000 0x0 0x20>;
> - };
> -
> - qos_ebc: qos at fe158000 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe158000 0x0 0x20>;
> - };
> -
> - qos_iep: qos at fe158100 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe158100 0x0 0x20>;
> - };
> -
> - qos_jpeg_dec: qos at fe158180 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe158180 0x0 0x20>;
> - };
> -
> - qos_jpeg_enc: qos at fe158200 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe158200 0x0 0x20>;
> - };
> -
> - qos_rga_rd: qos at fe158280 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe158280 0x0 0x20>;
> - };
> -
> - qos_rga_wr: qos at fe158300 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe158300 0x0 0x20>;
> - };
> -
> - qos_npu: qos at fe180000 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe180000 0x0 0x20>;
> - };
> -
> - qos_pcie2x1: qos at fe190000 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe190000 0x0 0x20>;
> - };
> -
> - qos_sata1: qos at fe190280 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe190280 0x0 0x20>;
> - };
> -
> - qos_sata2: qos at fe190300 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe190300 0x0 0x20>;
> - };
> -
> - qos_usb3_0: qos at fe190380 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe190380 0x0 0x20>;
> - };
> -
> - qos_usb3_1: qos at fe190400 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe190400 0x0 0x20>;
> - };
> -
> - qos_rkvdec: qos at fe198000 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe198000 0x0 0x20>;
> - };
> -
> - qos_hdcp: qos at fe1a8000 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe1a8000 0x0 0x20>;
> - };
> -
> - qos_vop_m0: qos at fe1a8080 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe1a8080 0x0 0x20>;
> - };
> -
> - qos_vop_m1: qos at fe1a8100 {
> - compatible = "rockchip,rk3568-qos", "syscon";
> - reg = <0x0 0xfe1a8100 0x0 0x20>;
> - };
> -
> - dfi: dfi at fe230000 {
> - compatible = "rockchip,rk3568-dfi";
> - reg = <0x00 0xfe230000 0x00 0x400>;
> - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> - rockchip,pmu = <&pmugrf>;
> - };
> -
> - pcie2x1: pcie at fe260000 {
> - compatible = "rockchip,rk3568-pcie";
> - reg = <0x3 0xc0000000 0x0 0x00400000>,
> - <0x0 0xfe260000 0x0 0x00010000>,
> - <0x0 0xf4000000 0x0 0x00100000>;
> - reg-names = "dbi", "apb", "config";
> - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "sys", "pmc", "msg", "legacy", "err";
> - bus-range = <0x0 0xf>;
> - clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
> - <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
> - <&cru CLK_PCIE20_AUX_NDFT>;
> - clock-names = "aclk_mst", "aclk_slv",
> - "aclk_dbi", "pclk", "aux";
> - device_type = "pci";
> - #interrupt-cells = <1>;
> - interrupt-map-mask = <0 0 0 7>;
> - interrupt-map = <0 0 0 1 &pcie_intc 0>,
> - <0 0 0 2 &pcie_intc 1>,
> - <0 0 0 3 &pcie_intc 2>,
> - <0 0 0 4 &pcie_intc 3>;
> - linux,pci-domain = <0>;
> - num-ib-windows = <6>;
> - num-ob-windows = <2>;
> - max-link-speed = <2>;
> - msi-map = <0x0 &gic 0x0 0x1000>;
> - num-lanes = <1>;
> - phys = <&combphy2 PHY_TYPE_PCIE>;
> - phy-names = "pcie-phy";
> - power-domains = <&power RK3568_PD_PIPE>;
> - ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>,
> - <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x01e00000>,
> - <0x03000000 0x0 0x40000000 0x3 0x00000000 0x0 0x40000000>;
> - resets = <&cru SRST_PCIE20_POWERUP>;
> - reset-names = "pipe";
> - #address-cells = <3>;
> - #size-cells = <2>;
> - status = "disabled";
> -
> - pcie_intc: legacy-interrupt-controller {
> - #address-cells = <0>;
> - #interrupt-cells = <1>;
> - interrupt-controller;
> - interrupt-parent = <&gic>;
> - interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
> - };
> - };
> -
> - sdmmc0: mmc at fe2b0000 {
> - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
> - reg = <0x0 0xfe2b0000 0x0 0x4000>;
> - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>,
> - <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>;
> - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> - fifo-depth = <0x100>;
> - max-frequency = <150000000>;
> - resets = <&cru SRST_SDMMC0>;
> - reset-names = "reset";
> - status = "disabled";
> - };
> -
> - sdmmc1: mmc at fe2c0000 {
> - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
> - reg = <0x0 0xfe2c0000 0x0 0x4000>;
> - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>,
> - <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>;
> - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> - fifo-depth = <0x100>;
> - max-frequency = <150000000>;
> - resets = <&cru SRST_SDMMC1>;
> - reset-names = "reset";
> - status = "disabled";
> - };
> -
> - sfc: spi at fe300000 {
> - compatible = "rockchip,sfc";
> - reg = <0x0 0xfe300000 0x0 0x4000>;
> - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
> - clock-names = "clk_sfc", "hclk_sfc";
> - pinctrl-0 = <&fspi_pins>;
> - pinctrl-names = "default";
> - status = "disabled";
> - };
> -
> - sdhci: mmc at fe310000 {
> - compatible = "rockchip,rk3568-dwcmshc";
> - reg = <0x0 0xfe310000 0x0 0x10000>;
> - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> - assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>;
> - assigned-clock-rates = <200000000>, <24000000>;
> - clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
> - <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
> - <&cru TCLK_EMMC>;
> - clock-names = "core", "bus", "axi", "block", "timer";
> - status = "disabled";
> - };
> -
> - i2s0_8ch: i2s at fe400000 {
> - compatible = "rockchip,rk3568-i2s-tdm";
> - reg = <0x0 0xfe400000 0x0 0x1000>;
> - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
> - assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>;
> - assigned-clock-rates = <1188000000>, <1188000000>;
> - clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>;
> - clock-names = "mclk_tx", "mclk_rx", "hclk";
> - dmas = <&dmac1 0>;
> - dma-names = "tx";
> - resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>;
> - reset-names = "tx-m", "rx-m";
> - rockchip,grf = <&grf>;
> - #sound-dai-cells = <0>;
> - status = "disabled";
> - };
> -
> - i2s1_8ch: i2s at fe410000 {
> - compatible = "rockchip,rk3568-i2s-tdm";
> - reg = <0x0 0xfe410000 0x0 0x1000>;
> - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
> - assigned-clocks = <&cru CLK_I2S1_8CH_TX_SRC>, <&cru CLK_I2S1_8CH_RX_SRC>;
> - assigned-clock-rates = <1188000000>, <1188000000>;
> - clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>,
> - <&cru HCLK_I2S1_8CH>;
> - clock-names = "mclk_tx", "mclk_rx", "hclk";
> - dmas = <&dmac1 3>, <&dmac1 2>;
> - dma-names = "rx", "tx";
> - resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>;
> - reset-names = "tx-m", "rx-m";
> - rockchip,grf = <&grf>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx
> - &i2s1m0_lrcktx &i2s1m0_lrckrx
> - &i2s1m0_sdi0 &i2s1m0_sdi1
> - &i2s1m0_sdi2 &i2s1m0_sdi3
> - &i2s1m0_sdo0 &i2s1m0_sdo1
> - &i2s1m0_sdo2 &i2s1m0_sdo3>;
> - #sound-dai-cells = <0>;
> - status = "disabled";
> - };
> -
> - i2s2_2ch: i2s at fe420000 {
> - compatible = "rockchip,rk3568-i2s-tdm";
> - reg = <0x0 0xfe420000 0x0 0x1000>;
> - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> - assigned-clocks = <&cru CLK_I2S2_2CH_SRC>;
> - assigned-clock-rates = <1188000000>;
> - clocks = <&cru MCLK_I2S2_2CH>, <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>;
> - clock-names = "mclk_tx", "mclk_rx", "hclk";
> - dmas = <&dmac1 4>, <&dmac1 5>;
> - dma-names = "tx", "rx";
> - resets = <&cru SRST_M_I2S2_2CH>;
> - reset-names = "m";
> - rockchip,grf = <&grf>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2s2m0_sclktx
> - &i2s2m0_lrcktx
> - &i2s2m0_sdi
> - &i2s2m0_sdo>;
> - #sound-dai-cells = <0>;
> - status = "disabled";
> - };
> -
> - i2s3_2ch: i2s at fe430000 {
> - compatible = "rockchip,rk3568-i2s-tdm";
> - reg = <0x0 0xfe430000 0x0 0x1000>;
> - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru MCLK_I2S3_2CH_TX>, <&cru MCLK_I2S3_2CH_RX>,
> - <&cru HCLK_I2S3_2CH>;
> - clock-names = "mclk_tx", "mclk_rx", "hclk";
> - dmas = <&dmac1 6>, <&dmac1 7>;
> - dma-names = "tx", "rx";
> - resets = <&cru SRST_M_I2S3_2CH_TX>, <&cru SRST_M_I2S3_2CH_RX>;
> - reset-names = "tx-m", "rx-m";
> - rockchip,grf = <&grf>;
> - #sound-dai-cells = <0>;
> - status = "disabled";
> - };
> -
> - pdm: pdm at fe440000 {
> - compatible = "rockchip,rk3568-pdm";
> - reg = <0x0 0xfe440000 0x0 0x1000>;
> - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru MCLK_PDM>, <&cru HCLK_PDM>;
> - clock-names = "pdm_clk", "pdm_hclk";
> - dmas = <&dmac1 9>;
> - dma-names = "rx";
> - pinctrl-0 = <&pdmm0_clk
> - &pdmm0_clk1
> - &pdmm0_sdi0
> - &pdmm0_sdi1
> - &pdmm0_sdi2
> - &pdmm0_sdi3>;
> - pinctrl-names = "default";
> - resets = <&cru SRST_M_PDM>;
> - reset-names = "pdm-m";
> - #sound-dai-cells = <0>;
> - status = "disabled";
> - };
> -
> - spdif: spdif at fe460000 {
> - compatible = "rockchip,rk3568-spdif";
> - reg = <0x0 0xfe460000 0x0 0x1000>;
> - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> - clock-names = "mclk", "hclk";
> - clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>;
> - dmas = <&dmac1 1>;
> - dma-names = "tx";
> - pinctrl-names = "default";
> - pinctrl-0 = <&spdifm0_tx>;
> - #sound-dai-cells = <0>;
> - status = "disabled";
> - };
> -
> - dmac0: dma-controller at fe530000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x0 0xfe530000 0x0 0x4000>;
> - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> - arm,pl330-periph-burst;
> - clocks = <&cru ACLK_BUS>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - };
> -
> - dmac1: dma-controller at fe550000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x0 0xfe550000 0x0 0x4000>;
> - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> - arm,pl330-periph-burst;
> - clocks = <&cru ACLK_BUS>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - };
> -
> - i2c1: i2c at fe5a0000 {
> - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
> - reg = <0x0 0xfe5a0000 0x0 0x1000>;
> - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
> - clock-names = "i2c", "pclk";
> - pinctrl-0 = <&i2c1_xfer>;
> - pinctrl-names = "default";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> -
> - i2c2: i2c at fe5b0000 {
> - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
> - reg = <0x0 0xfe5b0000 0x0 0x1000>;
> - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
> - clock-names = "i2c", "pclk";
> - pinctrl-0 = <&i2c2m0_xfer>;
> - pinctrl-names = "default";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> -
> - i2c3: i2c at fe5c0000 {
> - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
> - reg = <0x0 0xfe5c0000 0x0 0x1000>;
> - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
> - clock-names = "i2c", "pclk";
> - pinctrl-0 = <&i2c3m0_xfer>;
> - pinctrl-names = "default";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> -
> - i2c4: i2c at fe5d0000 {
> - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
> - reg = <0x0 0xfe5d0000 0x0 0x1000>;
> - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
> - clock-names = "i2c", "pclk";
> - pinctrl-0 = <&i2c4m0_xfer>;
> - pinctrl-names = "default";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> -
> - i2c5: i2c at fe5e0000 {
> - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
> - reg = <0x0 0xfe5e0000 0x0 0x1000>;
> - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
> - clock-names = "i2c", "pclk";
> - pinctrl-0 = <&i2c5m0_xfer>;
> - pinctrl-names = "default";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> -
> - wdt: watchdog at fe600000 {
> - compatible = "rockchip,rk3568-wdt", "snps,dw-wdt";
> - reg = <0x0 0xfe600000 0x0 0x100>;
> - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru TCLK_WDT_NS>, <&cru PCLK_WDT_NS>;
> - clock-names = "tclk", "pclk";
> - };
> -
> - spi0: spi at fe610000 {
> - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
> - reg = <0x0 0xfe610000 0x0 0x1000>;
> - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>;
> - clock-names = "spiclk", "apb_pclk";
> - dmas = <&dmac0 20>, <&dmac0 21>;
> - dma-names = "tx", "rx";
> - pinctrl-names = "default";
> - pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> -
> - spi1: spi at fe620000 {
> - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
> - reg = <0x0 0xfe620000 0x0 0x1000>;
> - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>;
> - clock-names = "spiclk", "apb_pclk";
> - dmas = <&dmac0 22>, <&dmac0 23>;
> - dma-names = "tx", "rx";
> - pinctrl-names = "default";
> - pinctrl-0 = <&spi1m0_cs0 &spi1m0_cs1 &spi1m0_pins>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> -
> - spi2: spi at fe630000 {
> - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
> - reg = <0x0 0xfe630000 0x0 0x1000>;
> - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>;
> - clock-names = "spiclk", "apb_pclk";
> - dmas = <&dmac0 24>, <&dmac0 25>;
> - dma-names = "tx", "rx";
> - pinctrl-names = "default";
> - pinctrl-0 = <&spi2m0_cs0 &spi2m0_cs1 &spi2m0_pins>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> -
> - spi3: spi at fe640000 {
> - compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
> - reg = <0x0 0xfe640000 0x0 0x1000>;
> - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>;
> - clock-names = "spiclk", "apb_pclk";
> - dmas = <&dmac0 26>, <&dmac0 27>;
> - dma-names = "tx", "rx";
> - pinctrl-names = "default";
> - pinctrl-0 = <&spi3m0_cs0 &spi3m0_cs1 &spi3m0_pins>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> -
> - uart1: serial at fe650000 {
> - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> - reg = <0x0 0xfe650000 0x0 0x100>;
> - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
> - clock-names = "baudclk", "apb_pclk";
> - dmas = <&dmac0 2>, <&dmac0 3>;
> - pinctrl-0 = <&uart1m0_xfer>;
> - pinctrl-names = "default";
> - reg-io-width = <4>;
> - reg-shift = <2>;
> - status = "disabled";
> - };
> -
> - uart2: serial at fe660000 {
> - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> - reg = <0x0 0xfe660000 0x0 0x100>;
> - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
> - clock-names = "baudclk", "apb_pclk";
> - dmas = <&dmac0 4>, <&dmac0 5>;
> - pinctrl-0 = <&uart2m0_xfer>;
> - pinctrl-names = "default";
> - reg-io-width = <4>;
> - reg-shift = <2>;
> - status = "disabled";
> - };
> -
> - uart3: serial at fe670000 {
> - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> - reg = <0x0 0xfe670000 0x0 0x100>;
> - interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
> - clock-names = "baudclk", "apb_pclk";
> - dmas = <&dmac0 6>, <&dmac0 7>;
> - pinctrl-0 = <&uart3m0_xfer>;
> - pinctrl-names = "default";
> - reg-io-width = <4>;
> - reg-shift = <2>;
> - status = "disabled";
> - };
> -
> - uart4: serial at fe680000 {
> - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> - reg = <0x0 0xfe680000 0x0 0x100>;
> - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
> - clock-names = "baudclk", "apb_pclk";
> - dmas = <&dmac0 8>, <&dmac0 9>;
> - pinctrl-0 = <&uart4m0_xfer>;
> - pinctrl-names = "default";
> - reg-io-width = <4>;
> - reg-shift = <2>;
> - status = "disabled";
> - };
> -
> - uart5: serial at fe690000 {
> - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> - reg = <0x0 0xfe690000 0x0 0x100>;
> - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
> - clock-names = "baudclk", "apb_pclk";
> - dmas = <&dmac0 10>, <&dmac0 11>;
> - pinctrl-0 = <&uart5m0_xfer>;
> - pinctrl-names = "default";
> - reg-io-width = <4>;
> - reg-shift = <2>;
> - status = "disabled";
> - };
> -
> - uart6: serial at fe6a0000 {
> - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> - reg = <0x0 0xfe6a0000 0x0 0x100>;
> - interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
> - clock-names = "baudclk", "apb_pclk";
> - dmas = <&dmac0 12>, <&dmac0 13>;
> - pinctrl-0 = <&uart6m0_xfer>;
> - pinctrl-names = "default";
> - reg-io-width = <4>;
> - reg-shift = <2>;
> - status = "disabled";
> - };
> -
> - uart7: serial at fe6b0000 {
> - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> - reg = <0x0 0xfe6b0000 0x0 0x100>;
> - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
> - clock-names = "baudclk", "apb_pclk";
> - dmas = <&dmac0 14>, <&dmac0 15>;
> - pinctrl-0 = <&uart7m0_xfer>;
> - pinctrl-names = "default";
> - reg-io-width = <4>;
> - reg-shift = <2>;
> - status = "disabled";
> - };
> -
> - uart8: serial at fe6c0000 {
> - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> - reg = <0x0 0xfe6c0000 0x0 0x100>;
> - interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
> - clock-names = "baudclk", "apb_pclk";
> - dmas = <&dmac0 16>, <&dmac0 17>;
> - pinctrl-0 = <&uart8m0_xfer>;
> - pinctrl-names = "default";
> - reg-io-width = <4>;
> - reg-shift = <2>;
> - status = "disabled";
> - };
> -
> - uart9: serial at fe6d0000 {
> - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> - reg = <0x0 0xfe6d0000 0x0 0x100>;
> - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
> - clock-names = "baudclk", "apb_pclk";
> - dmas = <&dmac0 18>, <&dmac0 19>;
> - pinctrl-0 = <&uart9m0_xfer>;
> - pinctrl-names = "default";
> - reg-io-width = <4>;
> - reg-shift = <2>;
> - status = "disabled";
> - };
> -
> - thermal_zones: thermal-zones {
> - cpu_thermal: cpu-thermal {
> - polling-delay-passive = <100>;
> - polling-delay = <1000>;
> -
> - thermal-sensors = <&tsadc 0>;
> -
> - trips {
> - cpu_alert0: cpu_alert0 {
> - temperature = <70000>;
> - hysteresis = <2000>;
> - type = "passive";
> - };
> - cpu_alert1: cpu_alert1 {
> - temperature = <75000>;
> - hysteresis = <2000>;
> - type = "passive";
> - };
> - cpu_crit: cpu_crit {
> - temperature = <95000>;
> - hysteresis = <2000>;
> - type = "critical";
> - };
> - };
> -
> - cooling-maps {
> - map0 {
> - trip = <&cpu_alert0>;
> - cooling-device =
> - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - };
> - };
> -
> - gpu_thermal: gpu-thermal {
> - polling-delay-passive = <20>; /* milliseconds */
> - polling-delay = <1000>; /* milliseconds */
> -
> - thermal-sensors = <&tsadc 1>;
> -
> - trips {
> - gpu_threshold: gpu-threshold {
> - temperature = <70000>;
> - hysteresis = <2000>;
> - type = "passive";
> - };
> - gpu_target: gpu-target {
> - temperature = <75000>;
> - hysteresis = <2000>;
> - type = "passive";
> - };
> - gpu_crit: gpu-crit {
> - temperature = <95000>;
> - hysteresis = <2000>;
> - type = "critical";
> - };
> - };
> -
> - cooling-maps {
> - map0 {
> - trip = <&gpu_target>;
> - cooling-device =
> - <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - };
> - };
> - };
> -
> - tsadc: tsadc at fe710000 {
> - compatible = "rockchip,rk3568-tsadc";
> - reg = <0x0 0xfe710000 0x0 0x100>;
> - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> - assigned-clocks = <&cru CLK_TSADC_TSEN>, <&cru CLK_TSADC>;
> - assigned-clock-rates = <17000000>, <700000>;
> - clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
> - clock-names = "tsadc", "apb_pclk";
> - resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>,
> - <&cru SRST_TSADCPHY>;
> - rockchip,grf = <&grf>;
> - rockchip,hw-tshut-temp = <95000>;
> - pinctrl-names = "init", "default", "sleep";
> - pinctrl-0 = <&tsadc_pin>;
> - pinctrl-1 = <&tsadc_shutorg>;
> - pinctrl-2 = <&tsadc_pin>;
> - #thermal-sensor-cells = <1>;
> - status = "disabled";
> - };
> -
> - saradc: saradc at fe720000 {
> - compatible = "rockchip,rk3568-saradc", "rockchip,rk3399-saradc";
> - reg = <0x0 0xfe720000 0x0 0x100>;
> - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
> - clock-names = "saradc", "apb_pclk";
> - resets = <&cru SRST_P_SARADC>;
> - reset-names = "saradc-apb";
> - #io-channel-cells = <1>;
> - status = "disabled";
> - };
> -
> - pwm4: pwm at fe6e0000 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfe6e0000 0x0 0x10>;
> - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm4_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - pwm5: pwm at fe6e0010 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfe6e0010 0x0 0x10>;
> - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm5_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - pwm6: pwm at fe6e0020 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfe6e0020 0x0 0x10>;
> - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm6_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - pwm7: pwm at fe6e0030 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfe6e0030 0x0 0x10>;
> - clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm7_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - pwm8: pwm at fe6f0000 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfe6f0000 0x0 0x10>;
> - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm8m0_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - pwm9: pwm at fe6f0010 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfe6f0010 0x0 0x10>;
> - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm9m0_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - pwm10: pwm at fe6f0020 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfe6f0020 0x0 0x10>;
> - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm10m0_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - pwm11: pwm at fe6f0030 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfe6f0030 0x0 0x10>;
> - clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm11m0_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - pwm12: pwm at fe700000 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfe700000 0x0 0x10>;
> - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm12m0_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - pwm13: pwm at fe700010 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfe700010 0x0 0x10>;
> - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm13m0_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - pwm14: pwm at fe700020 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfe700020 0x0 0x10>;
> - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm14m0_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - pwm15: pwm at fe700030 {
> - compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> - reg = <0x0 0xfe700030 0x0 0x10>;
> - clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> - clock-names = "pwm", "pclk";
> - pinctrl-0 = <&pwm15m0_pins>;
> - pinctrl-names = "default";
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> - combphy1: phy at fe830000 {
> - compatible = "rockchip,rk3568-naneng-combphy";
> - reg = <0x0 0xfe830000 0x0 0x100>;
> - clocks = <&pmucru CLK_PCIEPHY1_REF>,
> - <&cru PCLK_PIPEPHY1>,
> - <&cru PCLK_PIPE>;
> - clock-names = "ref", "apb", "pipe";
> - assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
> - assigned-clock-rates = <100000000>;
> - resets = <&cru SRST_PIPEPHY1>;
> - rockchip,pipe-grf = <&pipegrf>;
> - rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
> - #phy-cells = <1>;
> - status = "disabled";
> - };
> -
> - combphy2: phy at fe840000 {
> - compatible = "rockchip,rk3568-naneng-combphy";
> - reg = <0x0 0xfe840000 0x0 0x100>;
> - clocks = <&pmucru CLK_PCIEPHY2_REF>,
> - <&cru PCLK_PIPEPHY2>,
> - <&cru PCLK_PIPE>;
> - clock-names = "ref", "apb", "pipe";
> - assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
> - assigned-clock-rates = <100000000>;
> - resets = <&cru SRST_PIPEPHY2>;
> - rockchip,pipe-grf = <&pipegrf>;
> - rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
> - #phy-cells = <1>;
> - status = "disabled";
> - };
> -
> - csi_dphy: phy at fe870000 {
> - compatible = "rockchip,rk3568-csi-dphy";
> - reg = <0x0 0xfe870000 0x0 0x10000>;
> - clocks = <&cru PCLK_MIPICSIPHY>;
> - clock-names = "pclk";
> - #phy-cells = <0>;
> - resets = <&cru SRST_P_MIPICSIPHY>;
> - reset-names = "apb";
> - rockchip,grf = <&grf>;
> - status = "disabled";
> - };
> -
> - dsi_dphy0: mipi-dphy at fe850000 {
> - compatible = "rockchip,rk3568-dsi-dphy";
> - reg = <0x0 0xfe850000 0x0 0x10000>;
> - clock-names = "ref", "pclk";
> - clocks = <&pmucru CLK_MIPIDSIPHY0_REF>, <&cru PCLK_MIPIDSIPHY0>;
> - #phy-cells = <0>;
> - power-domains = <&power RK3568_PD_VO>;
> - reset-names = "apb";
> - resets = <&cru SRST_P_MIPIDSIPHY0>;
> - status = "disabled";
> - };
> -
> - dsi_dphy1: mipi-dphy at fe860000 {
> - compatible = "rockchip,rk3568-dsi-dphy";
> - reg = <0x0 0xfe860000 0x0 0x10000>;
> - clock-names = "ref", "pclk";
> - clocks = <&pmucru CLK_MIPIDSIPHY1_REF>, <&cru PCLK_MIPIDSIPHY1>;
> - #phy-cells = <0>;
> - power-domains = <&power RK3568_PD_VO>;
> - reset-names = "apb";
> - resets = <&cru SRST_P_MIPIDSIPHY1>;
> - status = "disabled";
> - };
> -
> - usb2phy0: usb2phy at fe8a0000 {
> - compatible = "rockchip,rk3568-usb2phy";
> - reg = <0x0 0xfe8a0000 0x0 0x10000>;
> - clocks = <&pmucru CLK_USBPHY0_REF>;
> - clock-names = "phyclk";
> - clock-output-names = "clk_usbphy0_480m";
> - interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
> - rockchip,usbgrf = <&usb2phy0_grf>;
> - #clock-cells = <0>;
> - status = "disabled";
> -
> - usb2phy0_host: host-port {
> - #phy-cells = <0>;
> - status = "disabled";
> - };
> -
> - usb2phy0_otg: otg-port {
> - #phy-cells = <0>;
> - status = "disabled";
> - };
> - };
> -
> - usb2phy1: usb2phy at fe8b0000 {
> - compatible = "rockchip,rk3568-usb2phy";
> - reg = <0x0 0xfe8b0000 0x0 0x10000>;
> - clocks = <&pmucru CLK_USBPHY1_REF>;
> - clock-names = "phyclk";
> - clock-output-names = "clk_usbphy1_480m";
> - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
> - rockchip,usbgrf = <&usb2phy1_grf>;
> - #clock-cells = <0>;
> - status = "disabled";
> -
> - usb2phy1_host: host-port {
> - #phy-cells = <0>;
> - status = "disabled";
> - };
> -
> - usb2phy1_otg: otg-port {
> - #phy-cells = <0>;
> - status = "disabled";
> - };
> - };
> -
> - pinctrl: pinctrl {
> - compatible = "rockchip,rk3568-pinctrl";
> - rockchip,grf = <&grf>;
> - rockchip,pmu = <&pmugrf>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> -
> - gpio0: gpio at fdd60000 {
> - compatible = "rockchip,gpio-bank";
> - reg = <0x0 0xfdd60000 0x0 0x100>;
> - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
> - gpio-controller;
> - gpio-ranges = <&pinctrl 0 0 32>;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio1: gpio at fe740000 {
> - compatible = "rockchip,gpio-bank";
> - reg = <0x0 0xfe740000 0x0 0x100>;
> - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
> - gpio-controller;
> - gpio-ranges = <&pinctrl 0 32 32>;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio2: gpio at fe750000 {
> - compatible = "rockchip,gpio-bank";
> - reg = <0x0 0xfe750000 0x0 0x100>;
> - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
> - gpio-controller;
> - gpio-ranges = <&pinctrl 0 64 32>;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio3: gpio at fe760000 {
> - compatible = "rockchip,gpio-bank";
> - reg = <0x0 0xfe760000 0x0 0x100>;
> - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
> - gpio-controller;
> - gpio-ranges = <&pinctrl 0 96 32>;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio4: gpio at fe770000 {
> - compatible = "rockchip,gpio-bank";
> - reg = <0x0 0xfe770000 0x0 0x100>;
> - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
> - gpio-controller;
> - gpio-ranges = <&pinctrl 0 128 32>;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> - };
> -};
> -
> -#include "rk3568-pinctrl.dtsi"
> diff --git a/include/dt-bindings/clock/rk3568-cru.h b/include/dt-bindings/clock/rk3568-cru.h
> deleted file mode 100644
> index d29890865150..000000000000
> --- a/include/dt-bindings/clock/rk3568-cru.h
> +++ /dev/null
> @@ -1,926 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -/*
> - * Copyright (c) 2021 Rockchip Electronics Co. Ltd.
> - * Author: Elaine Zhang <zhangqing at rock-chips.com>
> - */
> -
> -#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3568_H
> -#define _DT_BINDINGS_CLK_ROCKCHIP_RK3568_H
> -
> -/* pmucru-clocks indices */
> -
> -/* pmucru plls */
> -#define PLL_PPLL 1
> -#define PLL_HPLL 2
> -
> -/* pmucru clocks */
> -#define XIN_OSC0_DIV 4
> -#define CLK_RTC_32K 5
> -#define CLK_PMU 6
> -#define CLK_I2C0 7
> -#define CLK_RTC32K_FRAC 8
> -#define CLK_UART0_DIV 9
> -#define CLK_UART0_FRAC 10
> -#define SCLK_UART0 11
> -#define DBCLK_GPIO0 12
> -#define CLK_PWM0 13
> -#define CLK_CAPTURE_PWM0_NDFT 14
> -#define CLK_PMUPVTM 15
> -#define CLK_CORE_PMUPVTM 16
> -#define CLK_REF24M 17
> -#define XIN_OSC0_USBPHY0_G 18
> -#define CLK_USBPHY0_REF 19
> -#define XIN_OSC0_USBPHY1_G 20
> -#define CLK_USBPHY1_REF 21
> -#define XIN_OSC0_MIPIDSIPHY0_G 22
> -#define CLK_MIPIDSIPHY0_REF 23
> -#define XIN_OSC0_MIPIDSIPHY1_G 24
> -#define CLK_MIPIDSIPHY1_REF 25
> -#define CLK_WIFI_DIV 26
> -#define CLK_WIFI_OSC0 27
> -#define CLK_WIFI 28
> -#define CLK_PCIEPHY0_DIV 29
> -#define CLK_PCIEPHY0_OSC0 30
> -#define CLK_PCIEPHY0_REF 31
> -#define CLK_PCIEPHY1_DIV 32
> -#define CLK_PCIEPHY1_OSC0 33
> -#define CLK_PCIEPHY1_REF 34
> -#define CLK_PCIEPHY2_DIV 35
> -#define CLK_PCIEPHY2_OSC0 36
> -#define CLK_PCIEPHY2_REF 37
> -#define CLK_PCIE30PHY_REF_M 38
> -#define CLK_PCIE30PHY_REF_N 39
> -#define CLK_HDMI_REF 40
> -#define XIN_OSC0_EDPPHY_G 41
> -#define PCLK_PDPMU 42
> -#define PCLK_PMU 43
> -#define PCLK_UART0 44
> -#define PCLK_I2C0 45
> -#define PCLK_GPIO0 46
> -#define PCLK_PMUPVTM 47
> -#define PCLK_PWM0 48
> -#define CLK_PDPMU 49
> -#define SCLK_32K_IOE 50
> -
> -#define CLKPMU_NR_CLKS (SCLK_32K_IOE + 1)
> -
> -/* cru-clocks indices */
> -
> -/* cru plls */
> -#define PLL_APLL 1
> -#define PLL_DPLL 2
> -#define PLL_CPLL 3
> -#define PLL_GPLL 4
> -#define PLL_VPLL 5
> -#define PLL_NPLL 6
> -
> -/* cru clocks */
> -#define CPLL_333M 9
> -#define ARMCLK 10
> -#define USB480M 11
> -#define ACLK_CORE_NIU2BUS 18
> -#define CLK_CORE_PVTM 19
> -#define CLK_CORE_PVTM_CORE 20
> -#define CLK_CORE_PVTPLL 21
> -#define CLK_GPU_SRC 22
> -#define CLK_GPU_PRE_NDFT 23
> -#define CLK_GPU_PRE_MUX 24
> -#define ACLK_GPU_PRE 25
> -#define PCLK_GPU_PRE 26
> -#define CLK_GPU 27
> -#define CLK_GPU_NP5 28
> -#define PCLK_GPU_PVTM 29
> -#define CLK_GPU_PVTM 30
> -#define CLK_GPU_PVTM_CORE 31
> -#define CLK_GPU_PVTPLL 32
> -#define CLK_NPU_SRC 33
> -#define CLK_NPU_PRE_NDFT 34
> -#define CLK_NPU 35
> -#define CLK_NPU_NP5 36
> -#define HCLK_NPU_PRE 37
> -#define PCLK_NPU_PRE 38
> -#define ACLK_NPU_PRE 39
> -#define ACLK_NPU 40
> -#define HCLK_NPU 41
> -#define PCLK_NPU_PVTM 42
> -#define CLK_NPU_PVTM 43
> -#define CLK_NPU_PVTM_CORE 44
> -#define CLK_NPU_PVTPLL 45
> -#define CLK_DDRPHY1X_SRC 46
> -#define CLK_DDRPHY1X_HWFFC_SRC 47
> -#define CLK_DDR1X 48
> -#define CLK_MSCH 49
> -#define CLK24_DDRMON 50
> -#define ACLK_GIC_AUDIO 51
> -#define HCLK_GIC_AUDIO 52
> -#define HCLK_SDMMC_BUFFER 53
> -#define DCLK_SDMMC_BUFFER 54
> -#define ACLK_GIC600 55
> -#define ACLK_SPINLOCK 56
> -#define HCLK_I2S0_8CH 57
> -#define HCLK_I2S1_8CH 58
> -#define HCLK_I2S2_2CH 59
> -#define HCLK_I2S3_2CH 60
> -#define CLK_I2S0_8CH_TX_SRC 61
> -#define CLK_I2S0_8CH_TX_FRAC 62
> -#define MCLK_I2S0_8CH_TX 63
> -#define I2S0_MCLKOUT_TX 64
> -#define CLK_I2S0_8CH_RX_SRC 65
> -#define CLK_I2S0_8CH_RX_FRAC 66
> -#define MCLK_I2S0_8CH_RX 67
> -#define I2S0_MCLKOUT_RX 68
> -#define CLK_I2S1_8CH_TX_SRC 69
> -#define CLK_I2S1_8CH_TX_FRAC 70
> -#define MCLK_I2S1_8CH_TX 71
> -#define I2S1_MCLKOUT_TX 72
> -#define CLK_I2S1_8CH_RX_SRC 73
> -#define CLK_I2S1_8CH_RX_FRAC 74
> -#define MCLK_I2S1_8CH_RX 75
> -#define I2S1_MCLKOUT_RX 76
> -#define CLK_I2S2_2CH_SRC 77
> -#define CLK_I2S2_2CH_FRAC 78
> -#define MCLK_I2S2_2CH 79
> -#define I2S2_MCLKOUT 80
> -#define CLK_I2S3_2CH_TX_SRC 81
> -#define CLK_I2S3_2CH_TX_FRAC 82
> -#define MCLK_I2S3_2CH_TX 83
> -#define I2S3_MCLKOUT_TX 84
> -#define CLK_I2S3_2CH_RX_SRC 85
> -#define CLK_I2S3_2CH_RX_FRAC 86
> -#define MCLK_I2S3_2CH_RX 87
> -#define I2S3_MCLKOUT_RX 88
> -#define HCLK_PDM 89
> -#define MCLK_PDM 90
> -#define HCLK_VAD 91
> -#define HCLK_SPDIF_8CH 92
> -#define MCLK_SPDIF_8CH_SRC 93
> -#define MCLK_SPDIF_8CH_FRAC 94
> -#define MCLK_SPDIF_8CH 95
> -#define HCLK_AUDPWM 96
> -#define SCLK_AUDPWM_SRC 97
> -#define SCLK_AUDPWM_FRAC 98
> -#define SCLK_AUDPWM 99
> -#define HCLK_ACDCDIG 100
> -#define CLK_ACDCDIG_I2C 101
> -#define CLK_ACDCDIG_DAC 102
> -#define CLK_ACDCDIG_ADC 103
> -#define ACLK_SECURE_FLASH 104
> -#define HCLK_SECURE_FLASH 105
> -#define ACLK_CRYPTO_NS 106
> -#define HCLK_CRYPTO_NS 107
> -#define CLK_CRYPTO_NS_CORE 108
> -#define CLK_CRYPTO_NS_PKA 109
> -#define CLK_CRYPTO_NS_RNG 110
> -#define HCLK_TRNG_NS 111
> -#define CLK_TRNG_NS 112
> -#define PCLK_OTPC_NS 113
> -#define CLK_OTPC_NS_SBPI 114
> -#define CLK_OTPC_NS_USR 115
> -#define HCLK_NANDC 116
> -#define NCLK_NANDC 117
> -#define HCLK_SFC 118
> -#define HCLK_SFC_XIP 119
> -#define SCLK_SFC 120
> -#define ACLK_EMMC 121
> -#define HCLK_EMMC 122
> -#define BCLK_EMMC 123
> -#define CCLK_EMMC 124
> -#define TCLK_EMMC 125
> -#define ACLK_PIPE 126
> -#define PCLK_PIPE 127
> -#define PCLK_PIPE_GRF 128
> -#define ACLK_PCIE20_MST 129
> -#define ACLK_PCIE20_SLV 130
> -#define ACLK_PCIE20_DBI 131
> -#define PCLK_PCIE20 132
> -#define CLK_PCIE20_AUX_NDFT 133
> -#define CLK_PCIE20_AUX_DFT 134
> -#define CLK_PCIE20_PIPE_DFT 135
> -#define ACLK_PCIE30X1_MST 136
> -#define ACLK_PCIE30X1_SLV 137
> -#define ACLK_PCIE30X1_DBI 138
> -#define PCLK_PCIE30X1 139
> -#define CLK_PCIE30X1_AUX_NDFT 140
> -#define CLK_PCIE30X1_AUX_DFT 141
> -#define CLK_PCIE30X1_PIPE_DFT 142
> -#define ACLK_PCIE30X2_MST 143
> -#define ACLK_PCIE30X2_SLV 144
> -#define ACLK_PCIE30X2_DBI 145
> -#define PCLK_PCIE30X2 146
> -#define CLK_PCIE30X2_AUX_NDFT 147
> -#define CLK_PCIE30X2_AUX_DFT 148
> -#define CLK_PCIE30X2_PIPE_DFT 149
> -#define ACLK_SATA0 150
> -#define CLK_SATA0_PMALIVE 151
> -#define CLK_SATA0_RXOOB 152
> -#define CLK_SATA0_PIPE_NDFT 153
> -#define CLK_SATA0_PIPE_DFT 154
> -#define ACLK_SATA1 155
> -#define CLK_SATA1_PMALIVE 156
> -#define CLK_SATA1_RXOOB 157
> -#define CLK_SATA1_PIPE_NDFT 158
> -#define CLK_SATA1_PIPE_DFT 159
> -#define ACLK_SATA2 160
> -#define CLK_SATA2_PMALIVE 161
> -#define CLK_SATA2_RXOOB 162
> -#define CLK_SATA2_PIPE_NDFT 163
> -#define CLK_SATA2_PIPE_DFT 164
> -#define ACLK_USB3OTG0 165
> -#define CLK_USB3OTG0_REF 166
> -#define CLK_USB3OTG0_SUSPEND 167
> -#define ACLK_USB3OTG1 168
> -#define CLK_USB3OTG1_REF 169
> -#define CLK_USB3OTG1_SUSPEND 170
> -#define CLK_XPCS_EEE 171
> -#define PCLK_XPCS 172
> -#define ACLK_PHP 173
> -#define HCLK_PHP 174
> -#define PCLK_PHP 175
> -#define HCLK_SDMMC0 176
> -#define CLK_SDMMC0 177
> -#define HCLK_SDMMC1 178
> -#define CLK_SDMMC1 179
> -#define ACLK_GMAC0 180
> -#define PCLK_GMAC0 181
> -#define CLK_MAC0_2TOP 182
> -#define CLK_MAC0_OUT 183
> -#define CLK_MAC0_REFOUT 184
> -#define CLK_GMAC0_PTP_REF 185
> -#define ACLK_USB 186
> -#define HCLK_USB 187
> -#define PCLK_USB 188
> -#define HCLK_USB2HOST0 189
> -#define HCLK_USB2HOST0_ARB 190
> -#define HCLK_USB2HOST1 191
> -#define HCLK_USB2HOST1_ARB 192
> -#define HCLK_SDMMC2 193
> -#define CLK_SDMMC2 194
> -#define ACLK_GMAC1 195
> -#define PCLK_GMAC1 196
> -#define CLK_MAC1_2TOP 197
> -#define CLK_MAC1_OUT 198
> -#define CLK_MAC1_REFOUT 199
> -#define CLK_GMAC1_PTP_REF 200
> -#define ACLK_PERIMID 201
> -#define HCLK_PERIMID 202
> -#define ACLK_VI 203
> -#define HCLK_VI 204
> -#define PCLK_VI 205
> -#define ACLK_VICAP 206
> -#define HCLK_VICAP 207
> -#define DCLK_VICAP 208
> -#define ICLK_VICAP_G 209
> -#define ACLK_ISP 210
> -#define HCLK_ISP 211
> -#define CLK_ISP 212
> -#define PCLK_CSI2HOST1 213
> -#define CLK_CIF_OUT 214
> -#define CLK_CAM0_OUT 215
> -#define CLK_CAM1_OUT 216
> -#define ACLK_VO 217
> -#define HCLK_VO 218
> -#define PCLK_VO 219
> -#define ACLK_VOP_PRE 220
> -#define ACLK_VOP 221
> -#define HCLK_VOP 222
> -#define DCLK_VOP0 223
> -#define DCLK_VOP1 224
> -#define DCLK_VOP2 225
> -#define CLK_VOP_PWM 226
> -#define ACLK_HDCP 227
> -#define HCLK_HDCP 228
> -#define PCLK_HDCP 229
> -#define PCLK_HDMI_HOST 230
> -#define CLK_HDMI_SFR 231
> -#define PCLK_DSITX_0 232
> -#define PCLK_DSITX_1 233
> -#define PCLK_EDP_CTRL 234
> -#define CLK_EDP_200M 235
> -#define ACLK_VPU_PRE 236
> -#define HCLK_VPU_PRE 237
> -#define ACLK_VPU 238
> -#define HCLK_VPU 239
> -#define ACLK_RGA_PRE 240
> -#define HCLK_RGA_PRE 241
> -#define PCLK_RGA_PRE 242
> -#define ACLK_RGA 243
> -#define HCLK_RGA 244
> -#define CLK_RGA_CORE 245
> -#define ACLK_IEP 246
> -#define HCLK_IEP 247
> -#define CLK_IEP_CORE 248
> -#define HCLK_EBC 249
> -#define DCLK_EBC 250
> -#define ACLK_JDEC 251
> -#define HCLK_JDEC 252
> -#define ACLK_JENC 253
> -#define HCLK_JENC 254
> -#define PCLK_EINK 255
> -#define HCLK_EINK 256
> -#define ACLK_RKVENC_PRE 257
> -#define HCLK_RKVENC_PRE 258
> -#define ACLK_RKVENC 259
> -#define HCLK_RKVENC 260
> -#define CLK_RKVENC_CORE 261
> -#define ACLK_RKVDEC_PRE 262
> -#define HCLK_RKVDEC_PRE 263
> -#define ACLK_RKVDEC 264
> -#define HCLK_RKVDEC 265
> -#define CLK_RKVDEC_CA 266
> -#define CLK_RKVDEC_CORE 267
> -#define CLK_RKVDEC_HEVC_CA 268
> -#define ACLK_BUS 269
> -#define PCLK_BUS 270
> -#define PCLK_TSADC 271
> -#define CLK_TSADC_TSEN 272
> -#define CLK_TSADC 273
> -#define PCLK_SARADC 274
> -#define CLK_SARADC 275
> -#define PCLK_SCR 276
> -#define PCLK_WDT_NS 277
> -#define TCLK_WDT_NS 278
> -#define ACLK_DMAC0 279
> -#define ACLK_DMAC1 280
> -#define ACLK_MCU 281
> -#define PCLK_INTMUX 282
> -#define PCLK_MAILBOX 283
> -#define PCLK_UART1 284
> -#define CLK_UART1_SRC 285
> -#define CLK_UART1_FRAC 286
> -#define SCLK_UART1 287
> -#define PCLK_UART2 288
> -#define CLK_UART2_SRC 289
> -#define CLK_UART2_FRAC 290
> -#define SCLK_UART2 291
> -#define PCLK_UART3 292
> -#define CLK_UART3_SRC 293
> -#define CLK_UART3_FRAC 294
> -#define SCLK_UART3 295
> -#define PCLK_UART4 296
> -#define CLK_UART4_SRC 297
> -#define CLK_UART4_FRAC 298
> -#define SCLK_UART4 299
> -#define PCLK_UART5 300
> -#define CLK_UART5_SRC 301
> -#define CLK_UART5_FRAC 302
> -#define SCLK_UART5 303
> -#define PCLK_UART6 304
> -#define CLK_UART6_SRC 305
> -#define CLK_UART6_FRAC 306
> -#define SCLK_UART6 307
> -#define PCLK_UART7 308
> -#define CLK_UART7_SRC 309
> -#define CLK_UART7_FRAC 310
> -#define SCLK_UART7 311
> -#define PCLK_UART8 312
> -#define CLK_UART8_SRC 313
> -#define CLK_UART8_FRAC 314
> -#define SCLK_UART8 315
> -#define PCLK_UART9 316
> -#define CLK_UART9_SRC 317
> -#define CLK_UART9_FRAC 318
> -#define SCLK_UART9 319
> -#define PCLK_CAN0 320
> -#define CLK_CAN0 321
> -#define PCLK_CAN1 322
> -#define CLK_CAN1 323
> -#define PCLK_CAN2 324
> -#define CLK_CAN2 325
> -#define CLK_I2C 326
> -#define PCLK_I2C1 327
> -#define CLK_I2C1 328
> -#define PCLK_I2C2 329
> -#define CLK_I2C2 330
> -#define PCLK_I2C3 331
> -#define CLK_I2C3 332
> -#define PCLK_I2C4 333
> -#define CLK_I2C4 334
> -#define PCLK_I2C5 335
> -#define CLK_I2C5 336
> -#define PCLK_SPI0 337
> -#define CLK_SPI0 338
> -#define PCLK_SPI1 339
> -#define CLK_SPI1 340
> -#define PCLK_SPI2 341
> -#define CLK_SPI2 342
> -#define PCLK_SPI3 343
> -#define CLK_SPI3 344
> -#define PCLK_PWM1 345
> -#define CLK_PWM1 346
> -#define CLK_PWM1_CAPTURE 347
> -#define PCLK_PWM2 348
> -#define CLK_PWM2 349
> -#define CLK_PWM2_CAPTURE 350
> -#define PCLK_PWM3 351
> -#define CLK_PWM3 352
> -#define CLK_PWM3_CAPTURE 353
> -#define DBCLK_GPIO 354
> -#define PCLK_GPIO1 355
> -#define DBCLK_GPIO1 356
> -#define PCLK_GPIO2 357
> -#define DBCLK_GPIO2 358
> -#define PCLK_GPIO3 359
> -#define DBCLK_GPIO3 360
> -#define PCLK_GPIO4 361
> -#define DBCLK_GPIO4 362
> -#define OCC_SCAN_CLK_GPIO 363
> -#define PCLK_TIMER 364
> -#define CLK_TIMER0 365
> -#define CLK_TIMER1 366
> -#define CLK_TIMER2 367
> -#define CLK_TIMER3 368
> -#define CLK_TIMER4 369
> -#define CLK_TIMER5 370
> -#define ACLK_TOP_HIGH 371
> -#define ACLK_TOP_LOW 372
> -#define HCLK_TOP 373
> -#define PCLK_TOP 374
> -#define PCLK_PCIE30PHY 375
> -#define CLK_OPTC_ARB 376
> -#define PCLK_MIPICSIPHY 377
> -#define PCLK_MIPIDSIPHY0 378
> -#define PCLK_MIPIDSIPHY1 379
> -#define PCLK_PIPEPHY0 380
> -#define PCLK_PIPEPHY1 381
> -#define PCLK_PIPEPHY2 382
> -#define PCLK_CPU_BOOST 383
> -#define CLK_CPU_BOOST 384
> -#define PCLK_OTPPHY 385
> -#define SCLK_GMAC0 386
> -#define SCLK_GMAC0_RGMII_SPEED 387
> -#define SCLK_GMAC0_RMII_SPEED 388
> -#define SCLK_GMAC0_RX_TX 389
> -#define SCLK_GMAC1 390
> -#define SCLK_GMAC1_RGMII_SPEED 391
> -#define SCLK_GMAC1_RMII_SPEED 392
> -#define SCLK_GMAC1_RX_TX 393
> -#define SCLK_SDMMC0_DRV 394
> -#define SCLK_SDMMC0_SAMPLE 395
> -#define SCLK_SDMMC1_DRV 396
> -#define SCLK_SDMMC1_SAMPLE 397
> -#define SCLK_SDMMC2_DRV 398
> -#define SCLK_SDMMC2_SAMPLE 399
> -#define SCLK_EMMC_DRV 400
> -#define SCLK_EMMC_SAMPLE 401
> -#define PCLK_EDPPHY_GRF 402
> -#define CLK_HDMI_CEC 403
> -#define CLK_I2S0_8CH_TX 404
> -#define CLK_I2S0_8CH_RX 405
> -#define CLK_I2S1_8CH_TX 406
> -#define CLK_I2S1_8CH_RX 407
> -#define CLK_I2S2_2CH 408
> -#define CLK_I2S3_2CH_TX 409
> -#define CLK_I2S3_2CH_RX 410
> -#define CPLL_500M 411
> -#define CPLL_250M 412
> -#define CPLL_125M 413
> -#define CPLL_62P5M 414
> -#define CPLL_50M 415
> -#define CPLL_25M 416
> -#define CPLL_100M 417
> -#define SCLK_DDRCLK 418
> -
> -#define PCLK_CORE_PVTM 450
> -
> -#define CLK_NR_CLKS (PCLK_CORE_PVTM + 1)
> -
> -/* pmu soft-reset indices */
> -/* pmucru_softrst_con0 */
> -#define SRST_P_PDPMU_NIU 0
> -#define SRST_P_PMUCRU 1
> -#define SRST_P_PMUGRF 2
> -#define SRST_P_I2C0 3
> -#define SRST_I2C0 4
> -#define SRST_P_UART0 5
> -#define SRST_S_UART0 6
> -#define SRST_P_PWM0 7
> -#define SRST_PWM0 8
> -#define SRST_P_GPIO0 9
> -#define SRST_GPIO0 10
> -#define SRST_P_PMUPVTM 11
> -#define SRST_PMUPVTM 12
> -
> -/* soft-reset indices */
> -
> -/* cru_softrst_con0 */
> -#define SRST_NCORERESET0 0
> -#define SRST_NCORERESET1 1
> -#define SRST_NCORERESET2 2
> -#define SRST_NCORERESET3 3
> -#define SRST_NCPUPORESET0 4
> -#define SRST_NCPUPORESET1 5
> -#define SRST_NCPUPORESET2 6
> -#define SRST_NCPUPORESET3 7
> -#define SRST_NSRESET 8
> -#define SRST_NSPORESET 9
> -#define SRST_NATRESET 10
> -#define SRST_NGICRESET 11
> -#define SRST_NPRESET 12
> -#define SRST_NPERIPHRESET 13
> -
> -/* cru_softrst_con1 */
> -#define SRST_A_CORE_NIU2DDR 16
> -#define SRST_A_CORE_NIU2BUS 17
> -#define SRST_P_DBG_NIU 18
> -#define SRST_P_DBG 19
> -#define SRST_P_DBG_DAPLITE 20
> -#define SRST_DAP 21
> -#define SRST_A_ADB400_CORE2GIC 22
> -#define SRST_A_ADB400_GIC2CORE 23
> -#define SRST_P_CORE_GRF 24
> -#define SRST_P_CORE_PVTM 25
> -#define SRST_CORE_PVTM 26
> -#define SRST_CORE_PVTPLL 27
> -
> -/* cru_softrst_con2 */
> -#define SRST_GPU 32
> -#define SRST_A_GPU_NIU 33
> -#define SRST_P_GPU_NIU 34
> -#define SRST_P_GPU_PVTM 35
> -#define SRST_GPU_PVTM 36
> -#define SRST_GPU_PVTPLL 37
> -#define SRST_A_NPU_NIU 40
> -#define SRST_H_NPU_NIU 41
> -#define SRST_P_NPU_NIU 42
> -#define SRST_A_NPU 43
> -#define SRST_H_NPU 44
> -#define SRST_P_NPU_PVTM 45
> -#define SRST_NPU_PVTM 46
> -#define SRST_NPU_PVTPLL 47
> -
> -/* cru_softrst_con3 */
> -#define SRST_A_MSCH 51
> -#define SRST_HWFFC_CTRL 52
> -#define SRST_DDR_ALWAYSON 53
> -#define SRST_A_DDRSPLIT 54
> -#define SRST_DDRDFI_CTL 55
> -#define SRST_A_DMA2DDR 57
> -
> -/* cru_softrst_con4 */
> -#define SRST_A_PERIMID_NIU 64
> -#define SRST_H_PERIMID_NIU 65
> -#define SRST_A_GIC_AUDIO_NIU 66
> -#define SRST_H_GIC_AUDIO_NIU 67
> -#define SRST_A_GIC600 68
> -#define SRST_A_GIC600_DEBUG 69
> -#define SRST_A_GICADB_CORE2GIC 70
> -#define SRST_A_GICADB_GIC2CORE 71
> -#define SRST_A_SPINLOCK 72
> -#define SRST_H_SDMMC_BUFFER 73
> -#define SRST_D_SDMMC_BUFFER 74
> -#define SRST_H_I2S0_8CH 75
> -#define SRST_H_I2S1_8CH 76
> -#define SRST_H_I2S2_2CH 77
> -#define SRST_H_I2S3_2CH 78
> -
> -/* cru_softrst_con5 */
> -#define SRST_M_I2S0_8CH_TX 80
> -#define SRST_M_I2S0_8CH_RX 81
> -#define SRST_M_I2S1_8CH_TX 82
> -#define SRST_M_I2S1_8CH_RX 83
> -#define SRST_M_I2S2_2CH 84
> -#define SRST_M_I2S3_2CH_TX 85
> -#define SRST_M_I2S3_2CH_RX 86
> -#define SRST_H_PDM 87
> -#define SRST_M_PDM 88
> -#define SRST_H_VAD 89
> -#define SRST_H_SPDIF_8CH 90
> -#define SRST_M_SPDIF_8CH 91
> -#define SRST_H_AUDPWM 92
> -#define SRST_S_AUDPWM 93
> -#define SRST_H_ACDCDIG 94
> -#define SRST_ACDCDIG 95
> -
> -/* cru_softrst_con6 */
> -#define SRST_A_SECURE_FLASH_NIU 96
> -#define SRST_H_SECURE_FLASH_NIU 97
> -#define SRST_A_CRYPTO_NS 103
> -#define SRST_H_CRYPTO_NS 104
> -#define SRST_CRYPTO_NS_CORE 105
> -#define SRST_CRYPTO_NS_PKA 106
> -#define SRST_CRYPTO_NS_RNG 107
> -#define SRST_H_TRNG_NS 108
> -#define SRST_TRNG_NS 109
> -
> -/* cru_softrst_con7 */
> -#define SRST_H_NANDC 112
> -#define SRST_N_NANDC 113
> -#define SRST_H_SFC 114
> -#define SRST_H_SFC_XIP 115
> -#define SRST_S_SFC 116
> -#define SRST_A_EMMC 117
> -#define SRST_H_EMMC 118
> -#define SRST_B_EMMC 119
> -#define SRST_C_EMMC 120
> -#define SRST_T_EMMC 121
> -
> -/* cru_softrst_con8 */
> -#define SRST_A_PIPE_NIU 128
> -#define SRST_P_PIPE_NIU 130
> -#define SRST_P_PIPE_GRF 133
> -#define SRST_A_SATA0 134
> -#define SRST_SATA0_PIPE 135
> -#define SRST_SATA0_PMALIVE 136
> -#define SRST_SATA0_RXOOB 137
> -#define SRST_A_SATA1 138
> -#define SRST_SATA1_PIPE 139
> -#define SRST_SATA1_PMALIVE 140
> -#define SRST_SATA1_RXOOB 141
> -
> -/* cru_softrst_con9 */
> -#define SRST_A_SATA2 144
> -#define SRST_SATA2_PIPE 145
> -#define SRST_SATA2_PMALIVE 146
> -#define SRST_SATA2_RXOOB 147
> -#define SRST_USB3OTG0 148
> -#define SRST_USB3OTG1 149
> -#define SRST_XPCS 150
> -#define SRST_XPCS_TX_DIV10 151
> -#define SRST_XPCS_RX_DIV10 152
> -#define SRST_XPCS_XGXS_RX 153
> -
> -/* cru_softrst_con10 */
> -#define SRST_P_PCIE20 160
> -#define SRST_PCIE20_POWERUP 161
> -#define SRST_MSTR_ARESET_PCIE20 162
> -#define SRST_SLV_ARESET_PCIE20 163
> -#define SRST_DBI_ARESET_PCIE20 164
> -#define SRST_BRESET_PCIE20 165
> -#define SRST_PERST_PCIE20 166
> -#define SRST_CORE_RST_PCIE20 167
> -#define SRST_NSTICKY_RST_PCIE20 168
> -#define SRST_STICKY_RST_PCIE20 169
> -#define SRST_PWR_RST_PCIE20 170
> -
> -/* cru_softrst_con11 */
> -#define SRST_P_PCIE30X1 176
> -#define SRST_PCIE30X1_POWERUP 177
> -#define SRST_M_ARESET_PCIE30X1 178
> -#define SRST_S_ARESET_PCIE30X1 179
> -#define SRST_D_ARESET_PCIE30X1 180
> -#define SRST_BRESET_PCIE30X1 181
> -#define SRST_PERST_PCIE30X1 182
> -#define SRST_CORE_RST_PCIE30X1 183
> -#define SRST_NSTC_RST_PCIE30X1 184
> -#define SRST_STC_RST_PCIE30X1 185
> -#define SRST_PWR_RST_PCIE30X1 186
> -
> -/* cru_softrst_con12 */
> -#define SRST_P_PCIE30X2 192
> -#define SRST_PCIE30X2_POWERUP 193
> -#define SRST_M_ARESET_PCIE30X2 194
> -#define SRST_S_ARESET_PCIE30X2 195
> -#define SRST_D_ARESET_PCIE30X2 196
> -#define SRST_BRESET_PCIE30X2 197
> -#define SRST_PERST_PCIE30X2 198
> -#define SRST_CORE_RST_PCIE30X2 199
> -#define SRST_NSTC_RST_PCIE30X2 200
> -#define SRST_STC_RST_PCIE30X2 201
> -#define SRST_PWR_RST_PCIE30X2 202
> -
> -/* cru_softrst_con13 */
> -#define SRST_A_PHP_NIU 208
> -#define SRST_H_PHP_NIU 209
> -#define SRST_P_PHP_NIU 210
> -#define SRST_H_SDMMC0 211
> -#define SRST_SDMMC0 212
> -#define SRST_H_SDMMC1 213
> -#define SRST_SDMMC1 214
> -#define SRST_A_GMAC0 215
> -#define SRST_GMAC0_TIMESTAMP 216
> -
> -/* cru_softrst_con14 */
> -#define SRST_A_USB_NIU 224
> -#define SRST_H_USB_NIU 225
> -#define SRST_P_USB_NIU 226
> -#define SRST_P_USB_GRF 227
> -#define SRST_H_USB2HOST0 228
> -#define SRST_H_USB2HOST0_ARB 229
> -#define SRST_USB2HOST0_UTMI 230
> -#define SRST_H_USB2HOST1 231
> -#define SRST_H_USB2HOST1_ARB 232
> -#define SRST_USB2HOST1_UTMI 233
> -#define SRST_H_SDMMC2 234
> -#define SRST_SDMMC2 235
> -#define SRST_A_GMAC1 236
> -#define SRST_GMAC1_TIMESTAMP 237
> -
> -/* cru_softrst_con15 */
> -#define SRST_A_VI_NIU 240
> -#define SRST_H_VI_NIU 241
> -#define SRST_P_VI_NIU 242
> -#define SRST_A_VICAP 247
> -#define SRST_H_VICAP 248
> -#define SRST_D_VICAP 249
> -#define SRST_I_VICAP 250
> -#define SRST_P_VICAP 251
> -#define SRST_H_ISP 252
> -#define SRST_ISP 253
> -#define SRST_P_CSI2HOST1 255
> -
> -/* cru_softrst_con16 */
> -#define SRST_A_VO_NIU 256
> -#define SRST_H_VO_NIU 257
> -#define SRST_P_VO_NIU 258
> -#define SRST_A_VOP_NIU 259
> -#define SRST_A_VOP 260
> -#define SRST_H_VOP 261
> -#define SRST_VOP0 262
> -#define SRST_VOP1 263
> -#define SRST_VOP2 264
> -#define SRST_VOP_PWM 265
> -#define SRST_A_HDCP 266
> -#define SRST_H_HDCP 267
> -#define SRST_P_HDCP 268
> -#define SRST_P_HDMI_HOST 270
> -#define SRST_HDMI_HOST 271
> -
> -/* cru_softrst_con17 */
> -#define SRST_P_DSITX_0 272
> -#define SRST_P_DSITX_1 273
> -#define SRST_P_EDP_CTRL 274
> -#define SRST_EDP_24M 275
> -#define SRST_A_VPU_NIU 280
> -#define SRST_H_VPU_NIU 281
> -#define SRST_A_VPU 282
> -#define SRST_H_VPU 283
> -#define SRST_H_EINK 286
> -#define SRST_P_EINK 287
> -
> -/* cru_softrst_con18 */
> -#define SRST_A_RGA_NIU 288
> -#define SRST_H_RGA_NIU 289
> -#define SRST_P_RGA_NIU 290
> -#define SRST_A_RGA 292
> -#define SRST_H_RGA 293
> -#define SRST_RGA_CORE 294
> -#define SRST_A_IEP 295
> -#define SRST_H_IEP 296
> -#define SRST_IEP_CORE 297
> -#define SRST_H_EBC 298
> -#define SRST_D_EBC 299
> -#define SRST_A_JDEC 300
> -#define SRST_H_JDEC 301
> -#define SRST_A_JENC 302
> -#define SRST_H_JENC 303
> -
> -/* cru_softrst_con19 */
> -#define SRST_A_VENC_NIU 304
> -#define SRST_H_VENC_NIU 305
> -#define SRST_A_RKVENC 307
> -#define SRST_H_RKVENC 308
> -#define SRST_RKVENC_CORE 309
> -
> -/* cru_softrst_con20 */
> -#define SRST_A_RKVDEC_NIU 320
> -#define SRST_H_RKVDEC_NIU 321
> -#define SRST_A_RKVDEC 322
> -#define SRST_H_RKVDEC 323
> -#define SRST_RKVDEC_CA 324
> -#define SRST_RKVDEC_CORE 325
> -#define SRST_RKVDEC_HEVC_CA 326
> -
> -/* cru_softrst_con21 */
> -#define SRST_A_BUS_NIU 336
> -#define SRST_P_BUS_NIU 338
> -#define SRST_P_CAN0 340
> -#define SRST_CAN0 341
> -#define SRST_P_CAN1 342
> -#define SRST_CAN1 343
> -#define SRST_P_CAN2 344
> -#define SRST_CAN2 345
> -#define SRST_P_GPIO1 346
> -#define SRST_GPIO1 347
> -#define SRST_P_GPIO2 348
> -#define SRST_GPIO2 349
> -#define SRST_P_GPIO3 350
> -#define SRST_GPIO3 351
> -
> -/* cru_softrst_con22 */
> -#define SRST_P_GPIO4 352
> -#define SRST_GPIO4 353
> -#define SRST_P_I2C1 354
> -#define SRST_I2C1 355
> -#define SRST_P_I2C2 356
> -#define SRST_I2C2 357
> -#define SRST_P_I2C3 358
> -#define SRST_I2C3 359
> -#define SRST_P_I2C4 360
> -#define SRST_I2C4 361
> -#define SRST_P_I2C5 362
> -#define SRST_I2C5 363
> -#define SRST_P_OTPC_NS 364
> -#define SRST_OTPC_NS_SBPI 365
> -#define SRST_OTPC_NS_USR 366
> -
> -/* cru_softrst_con23 */
> -#define SRST_P_PWM1 368
> -#define SRST_PWM1 369
> -#define SRST_P_PWM2 370
> -#define SRST_PWM2 371
> -#define SRST_P_PWM3 372
> -#define SRST_PWM3 373
> -#define SRST_P_SPI0 374
> -#define SRST_SPI0 375
> -#define SRST_P_SPI1 376
> -#define SRST_SPI1 377
> -#define SRST_P_SPI2 378
> -#define SRST_SPI2 379
> -#define SRST_P_SPI3 380
> -#define SRST_SPI3 381
> -
> -/* cru_softrst_con24 */
> -#define SRST_P_SARADC 384
> -#define SRST_P_TSADC 385
> -#define SRST_TSADC 386
> -#define SRST_P_TIMER 387
> -#define SRST_TIMER0 388
> -#define SRST_TIMER1 389
> -#define SRST_TIMER2 390
> -#define SRST_TIMER3 391
> -#define SRST_TIMER4 392
> -#define SRST_TIMER5 393
> -#define SRST_P_UART1 394
> -#define SRST_S_UART1 395
> -
> -/* cru_softrst_con25 */
> -#define SRST_P_UART2 400
> -#define SRST_S_UART2 401
> -#define SRST_P_UART3 402
> -#define SRST_S_UART3 403
> -#define SRST_P_UART4 404
> -#define SRST_S_UART4 405
> -#define SRST_P_UART5 406
> -#define SRST_S_UART5 407
> -#define SRST_P_UART6 408
> -#define SRST_S_UART6 409
> -#define SRST_P_UART7 410
> -#define SRST_S_UART7 411
> -#define SRST_P_UART8 412
> -#define SRST_S_UART8 413
> -#define SRST_P_UART9 414
> -#define SRST_S_UART9 415
> -
> -/* cru_softrst_con26 */
> -#define SRST_P_GRF 416
> -#define SRST_P_GRF_VCCIO12 417
> -#define SRST_P_GRF_VCCIO34 418
> -#define SRST_P_GRF_VCCIO567 419
> -#define SRST_P_SCR 420
> -#define SRST_P_WDT_NS 421
> -#define SRST_T_WDT_NS 422
> -#define SRST_P_DFT2APB 423
> -#define SRST_A_MCU 426
> -#define SRST_P_INTMUX 427
> -#define SRST_P_MAILBOX 428
> -
> -/* cru_softrst_con27 */
> -#define SRST_A_TOP_HIGH_NIU 432
> -#define SRST_A_TOP_LOW_NIU 433
> -#define SRST_H_TOP_NIU 434
> -#define SRST_P_TOP_NIU 435
> -#define SRST_P_TOP_CRU 438
> -#define SRST_P_DDRPHY 439
> -#define SRST_DDRPHY 440
> -#define SRST_P_MIPICSIPHY 442
> -#define SRST_P_MIPIDSIPHY0 443
> -#define SRST_P_MIPIDSIPHY1 444
> -#define SRST_P_PCIE30PHY 445
> -#define SRST_PCIE30PHY 446
> -#define SRST_P_PCIE30PHY_GRF 447
> -
> -/* cru_softrst_con28 */
> -#define SRST_P_APB2ASB_LEFT 448
> -#define SRST_P_APB2ASB_BOTTOM 449
> -#define SRST_P_ASB2APB_LEFT 450
> -#define SRST_P_ASB2APB_BOTTOM 451
> -#define SRST_P_PIPEPHY0 452
> -#define SRST_PIPEPHY0 453
> -#define SRST_P_PIPEPHY1 454
> -#define SRST_PIPEPHY1 455
> -#define SRST_P_PIPEPHY2 456
> -#define SRST_PIPEPHY2 457
> -#define SRST_P_USB2PHY0_GRF 458
> -#define SRST_P_USB2PHY1_GRF 459
> -#define SRST_P_CPU_BOOST 460
> -#define SRST_CPU_BOOST 461
> -#define SRST_P_OTPPHY 462
> -#define SRST_OTPPHY 463
> -
> -/* cru_softrst_con29 */
> -#define SRST_USB2PHY0_POR 464
> -#define SRST_USB2PHY0_USB3OTG0 465
> -#define SRST_USB2PHY0_USB3OTG1 466
> -#define SRST_USB2PHY1_POR 467
> -#define SRST_USB2PHY1_USB2HOST0 468
> -#define SRST_USB2PHY1_USB2HOST1 469
> -#define SRST_P_EDPPHY_GRF 470
> -#define SRST_TSADCPHY 471
> -#define SRST_GMAC0_DELAYLINE 472
> -#define SRST_GMAC1_DELAYLINE 473
> -#define SRST_OTPC_ARB 474
> -#define SRST_P_PIPEPHY0_GRF 475
> -#define SRST_P_PIPEPHY1_GRF 476
> -#define SRST_P_PIPEPHY2_GRF 477
> -
> -#endif
> diff --git a/include/dt-bindings/power/rk3568-power.h b/include/dt-bindings/power/rk3568-power.h
> deleted file mode 100644
> index 6cc1af1a9d26..000000000000
> --- a/include/dt-bindings/power/rk3568-power.h
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -#ifndef __DT_BINDINGS_POWER_RK3568_POWER_H__
> -#define __DT_BINDINGS_POWER_RK3568_POWER_H__
> -
> -/* VD_CORE */
> -#define RK3568_PD_CPU_0 0
> -#define RK3568_PD_CPU_1 1
> -#define RK3568_PD_CPU_2 2
> -#define RK3568_PD_CPU_3 3
> -#define RK3568_PD_CORE_ALIVE 4
> -
> -/* VD_PMU */
> -#define RK3568_PD_PMU 5
> -
> -/* VD_NPU */
> -#define RK3568_PD_NPU 6
> -
> -/* VD_GPU */
> -#define RK3568_PD_GPU 7
> -
> -/* VD_LOGIC */
> -#define RK3568_PD_VI 8
> -#define RK3568_PD_VO 9
> -#define RK3568_PD_RGA 10
> -#define RK3568_PD_VPU 11
> -#define RK3568_PD_CENTER 12
> -#define RK3568_PD_RKVDEC 13
> -#define RK3568_PD_RKVENC 14
> -#define RK3568_PD_PIPE 15
> -#define RK3568_PD_LOGIC_ALIVE 16
> -
> -#endif
> --
> 2.43.2
>
More information about the U-Boot
mailing list