[PATCH v2 03/18] rockchip: rk3399-puma: Use common bss and stack addresses

[Kever Yang]

On 2024/4/30 23:30, Jonas Karlman wrote:
> The rk3399-puma board is currently using SPL stack and bss addr in SRAM,
> the same addr typically used by TPL, this differs from most other RK3399
> boards.
>
> Switch to use the common bss and stack addresses introduced in commit
> 008ba0d56d00 ("rockchip: Add common default bss and stack addresses").
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> v2: New patch
> ---
>   configs/puma-rk3399_defconfig | 10 ----------
>   1 file changed, 10 deletions(-)
>
> diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
> index ec7d52a6e13e..bd4926cf0fce 100644
> --- a/configs/puma-rk3399_defconfig
> +++ b/configs/puma-rk3399_defconfig
> @@ -2,11 +2,8 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> -CONFIG_TEXT_BASE=0x00200000
>   CONFIG_SPL_GPIO=y
>   CONFIG_NR_DRAM_BANKS=1
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
>   CONFIG_SF_DEFAULT_SPEED=20000000
>   CONFIG_ENV_SIZE=0x3000
>   CONFIG_ENV_OFFSET=0x3F8000
> @@ -16,12 +13,6 @@ CONFIG_ROCKCHIP_RK3399=y
>   CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0
>   CONFIG_ROCKCHIP_SPI_IMAGE=y
>   CONFIG_TARGET_PUMA_RK3399=y
> -CONFIG_SPL_STACK=0xff8effff
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0xff8e0000
> -CONFIG_SPL_BSS_MAX_SIZE=0x10000
> -CONFIG_SPL_STACK_R=y
> -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
>   CONFIG_DEBUG_UART_BASE=0xFF180000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SPL_SPI_FLASH_SUPPORT=y
> @@ -33,7 +24,6 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_MAX_SIZE=0x2e000
>   CONFIG_SPL_PAD_TO=0x38000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
>   CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
>   CONFIG_SPL_I2C=y
>   CONFIG_SPL_POWER=y