[PATCH v2 15/18] rockchip: rk3399-puma: Move uart0 bootph to board u-boot.dtsi

[Kever Yang]

On 2024/4/30 23:30, Jonas Karlman wrote:
> rk3399-puma is the only supported board that use uart0 for serial
> console, other RK3399 boards typically use uart2 for serial console
> and may use uart0 for bluetooth.
>
> Move setting bootph prop to board u-boot.dtsi to only include the uart0
> node in TPL/SPL control FDT for the rk3399-puma target.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> v2: New patch split from "Fix loading FIT from SD-card" patch
> ---
>   arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi | 4 ++++
>   arch/arm/dts/rk3399-u-boot.dtsi             | 4 ----
>   2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi b/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi
> index 2b3ea6da88db..390cf24152a6 100644
> --- a/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi
> +++ b/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi
> @@ -110,3 +110,7 @@
>   &sdmmc_cmd {
>   	bootph-all;
>   };
> +
> +&uart0 {
> +	bootph-all;
> +};
> diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
> index 496f25d9fbf6..9815dc53e8ed 100644
> --- a/arch/arm/dts/rk3399-u-boot.dtsi
> +++ b/arch/arm/dts/rk3399-u-boot.dtsi
> @@ -134,10 +134,6 @@
>   	bootph-all;
>   };
>   
> -&uart0 {
> -	bootph-all;
> -};
> -
>   &uart2 {
>   	bootph-all;
>   };