[PATCH v5 3/6] arm: dts: k3-am625-sk: Enable usb port in u-boot

[Martyn Welch]

From: Sjoerd Simons <sjoerd at collabora.com>

Enable usb0 in all boot phases for use with DFU

Signed-off-by: Sjoerd Simons <sjoerd at collabora.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin at siemens.com>
Signed-off-by: Martyn Welch <martyn.welch at collabora.com>
---
Changes in v5:
- Forcing usb0 into peripheral mode reinstated

Changes in v4:
- Don't force usb0 into peripheral mode

Changes in v3:
- Enable usb nodes in all boot phases

Changes in v2:
- Only enable usb port 0 DFU in SPL

 arch/arm/dts/k3-am625-sk-u-boot.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
index fa778b0ff4..1fc0d407cb 100644
--- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
@@ -46,3 +46,12 @@
 &cpsw_port2 {
 	status = "disabled";
 };
+
+&usbss0 {
+	bootph-all;
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	bootph-all;
+};
-- 
2.43.0