[PATCH v5 5/6] beagleplay: Add DFU support
Mattijs Korpershoek
mkorpershoek at baylibre.com
Tue May 7 11:15:00 CEST 2024
Hi Martyn,
Thank you for the patch, and for taking over this series.
On lun., mai 06, 2024 at 15:38, Martyn Welch <martyn.welch at collabora.com> wrote:
> From: Sjoerd Simons <sjoerd at collabora.com>
>
> DFU mode on a beagleplay can be used via the Type-C connector by holding
> the USR switch while powering on.
>
> Configuration is already provided as fragments for both the A53 and R5
> u-boot parts. Include the am62x_a53_usbdfu.config config. The
> am62x_r5_usbdfu.config fragment needs to be added should DFU boot be
> required as this will disable booting from persistent storage due to
> binary size constraints.
>
> Signed-off-by: Sjoerd Simons <sjoerd at collabora.com>
> Signed-off-by: Martyn Welch <martyn.welch at collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
I've tested usb gadget on Beagle Play board using fastboot.
Also tested DFU mode via snagboot.
Tested-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
> ---
> Changes in v5:
> - Use existing config fragment for a53 DFU configuration
> - Force usb0 into peripheral mode
>
> Changes in v4:
> - New patch
>
> arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 9 +++++++++
> board/beagle/beagleplay/beagleplay.env | 1 +
> configs/am62x_beagleplay_a53_defconfig | 2 ++
> 3 files changed, 12 insertions(+)
>
> diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> index fb2032068d..967a2bdcd1 100644
> --- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> +++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> @@ -54,6 +54,15 @@
> >;
> };
>
> +&usbss0 {
> + bootph-all;
> +};
> +
> +&usb0 {
> + dr_mode = "peripheral";
> + bootph-all;
> +};
> +
> #ifdef CONFIG_TARGET_AM625_A53_BEAGLEPLAY
>
> #define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
> diff --git a/board/beagle/beagleplay/beagleplay.env b/board/beagle/beagleplay/beagleplay.env
> index bbf6b925d0..8dbfc2f7d2 100644
> --- a/board/beagle/beagleplay/beagleplay.env
> +++ b/board/beagle/beagleplay/beagleplay.env
> @@ -1,5 +1,6 @@
> #include <env/ti/ti_common.env>
> #include <env/ti/mmc.env>
> +#include <env/ti/k3_dfu.env>
>
> name_kern=Image
> console=ttyS2,115200n8
> diff --git a/configs/am62x_beagleplay_a53_defconfig b/configs/am62x_beagleplay_a53_defconfig
> index 4f1be1df59..ec62670d55 100644
> --- a/configs/am62x_beagleplay_a53_defconfig
> +++ b/configs/am62x_beagleplay_a53_defconfig
> @@ -121,3 +121,5 @@ CONFIG_EXT4_WRITE=y
> CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
> CONFIG_LZO=y
> CONFIG_EFI_SET_TIME=y
> +
> +#include <configs/am62x_a53_usbdfu.config>
> --
> 2.43.0
More information about the U-Boot
mailing list