[PATCH] qcom_defconfig: enable msm8916 and msm8996

[Sam Day]

From: Caleb Connolly <caleb.connolly at linaro.org>

Enable the clock/pinctrl drivers for these two SoCs. Previously left out
due to only being used on the db410c and db820c respectively which both
have their own board code. We can still boot these with most features
working without that board code.

Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
I nabbed this commit from one of Caleb's work trees. Along with the
carveout patch I just sent, this gets U-Boot to successfully boot when
chained from lk2nd on msm8916 devices supported by that bootloader.

A similar plea on this patch as with the "mach-snapdragon: do carveouts
for qcs404 only" patch: if we could scrape these changes into the
2024.07 release that would be positively sublime.

Signed-off-by: Sam Day <me at samcday.com>
---
 configs/qcom_defconfig | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig
index 80ad3b32e1..c438aeef8e 100644
--- a/configs/qcom_defconfig
+++ b/configs/qcom_defconfig
@@ -37,6 +37,8 @@ CONFIG_OF_LIVE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BUTTON_QCOM_PMIC=y
 CONFIG_CLK=y
+CONFIG_CLK_QCOM_APQ8016=y
+CONFIG_CLK_QCOM_APQ8096=y
 CONFIG_CLK_QCOM_QCM2290=y
 CONFIG_CLK_QCOM_QCS404=y
 CONFIG_CLK_QCOM_SDM845=y
@@ -73,6 +75,8 @@ CONFIG_PHY_QCOM_QUSB2=y
 CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
 CONFIG_PHY_QCOM_SNPS_EUSB2=y
 CONFIG_PINCTRL=y
+CONFIG_PINCTRL_QCOM_APQ8016=y
+CONFIG_PINCTRL_QCOM_APQ8096=y
 CONFIG_PINCTRL_QCOM_QCM2290=y
 CONFIG_PINCTRL_QCOM_QCS404=y
 CONFIG_PINCTRL_QCOM_SDM845=y

---
base-commit: 1c40dda60f5f7e83a6d6f541cf5a57eb7e8ec43c
change-id: 20240507-qcom-defconfig-msm8916-61c8437a0b2e

Best regards,
-- 
Sam Day <me at samcday.com>