[PATCH v2 0/8] ECC Series

[Santhosh Kumar K]

Hello,

This series is to:

Add support for Inline ECC in DDR for AM64X, AM62X, AM62AX, AM62PX,
J721S2 and J784S4 devices.

(1/8) Enable ECC priming with BIST engine
(2/8) Add a function to store base address and size of RAM's banks
      in a 64-bit device private data
(3/8) Setup the ECC region start and range
(4/8) Enable ECC 1-bit error, 2-bit error and multiple-bit
      error interrupts
(5/8) Add CONFIG_K3_INLINE_ECC
(6/8) Set NR_DRAM_BANKS to 2
(7/8) Pull Redundant DDR functions to a common location and Fixup
      DDR size when ECC is enabled
(8/8) Add ss_cfg reg entry

Changes since v1:
Add support for J7* devices.

v1: https://lore.kernel.org/u-boot/20240131060213.1128024-1-s-k6@ti.com/T/#m19d34d1ebc2802ad80e2412265e7858c98b0510f

Test Results:
https://gist.github.com/santhosh21/53c6f285640c4b6dfb3420d84975d12a

This series contains changes that grab the memory node from the DTS
to set/modify DRAM bank sizes. A kernel patch has been sent [1]
setting the required nodes to be available at bootloader stage. This
patch series can be merged only after the DTS changes have been
reflected in U-Boot either via OF_UPSTREAM (for devices that have
moved to it) or via a sync to U-Boot patch.

[1] https://lore.kernel.org/all/20240506110203.3230255-1-n-francis@ti.com/

Thanks and Regards,
Santhosh.

Georgi Vlaev (1):
  ram: k3-ddrss: Use the DDR controller BIST engine for ECC priming

Neha Malcom Francis (2):
  drivers: ram: Kconfig: Add CONFIG_K3_INLINE_ECC
  configs: j7*_evm_r5_defconfig: Set NR_DRAM_BANKS to 2

Santhosh Kumar K (5):
  ram: k3-ddrss: Add k3_ddrss_ddr_bank_base_size_calc() to solve
    'calculations restricted to 32 bits' issue
  ram: k3-ddrss: Setup ECC region start and range
  ram: k3-ddrss: Enable ECC interrupts
  board: ti: Pull redundant DDR functions to a common location and Fixup
    DDR size when ECC is enabled
  arm: dts: k3-*-ddr: Add ss_cfg reg entry

 arch/arm/dts/k3-am62a-ddr.dtsi  |   7 +-
 arch/arm/dts/k3-j721s2-ddr.dtsi |  12 +-
 arch/arm/dts/k3-j784s4-ddr.dtsi |  24 ++--
 board/ti/am62ax/evm.c           |  17 +--
 board/ti/am62px/evm.c           |  18 +--
 board/ti/am62x/evm.c            |  63 ++--------
 board/ti/am64x/evm.c            |  73 ++---------
 board/ti/am65x/evm.c            |  29 +----
 board/ti/common/Makefile        |   1 +
 board/ti/common/k3-ddr-init.c   |  89 +++++++++++++
 board/ti/common/k3-ddr-init.h   |  15 +++
 board/ti/j721e/evm.c            |  29 +----
 board/ti/j721s2/evm.c           |  35 ++----
 board/ti/j784s4/evm.c           |  17 +--
 configs/j7200_evm_r5_defconfig  |   1 +
 configs/j721e_evm_r5_defconfig  |   1 +
 configs/j721s2_evm_r5_defconfig |   1 +
 configs/j784s4_evm_r5_defconfig |   1 +
 drivers/ram/Kconfig             |  11 ++
 drivers/ram/k3-ddrss/k3-ddrss.c | 214 +++++++++++++++++++++++++++-----
 20 files changed, 391 insertions(+), 267 deletions(-)
 create mode 100644 board/ti/common/k3-ddr-init.c
 create mode 100644 board/ti/common/k3-ddr-init.h

-- 
2.34.1