[PATCH 0/2] sunxi: v3s: add network support

[Michael Walle]

Add network support for the V3s which only supports the internal
PHY. Adding support was straight forward. The emac driver just needs
the compatible string and some platform data and the clock driver
needs to know the bits for the clock gating as well as the reset
bits.

This was tested on a custom board.

Michael Walle (2):
  clk: sunxi: add EMAC and EPHY clocks and resets for the V3s SoC
  net: sun8i_emac: add support for the V3s

 drivers/clk/sunxi/clk_v3s.c | 6 ++++++
 drivers/net/sun8i_emac.c    | 7 +++++++
 2 files changed, 13 insertions(+)

-- 
2.39.2