[PATCH 3/3 v4] venice: show emmc boot hardware partition

[Tim Harvey]

To aid in understanding what emmc hardware partition is being
used to boot on power-up, display the hardware partition name in the
SPL.

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
v4:
 - include previous stand-alone patch in series
 - use emmc hw partition enum and names
---
 board/gateworks/venice/spl.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/board/gateworks/venice/spl.c b/board/gateworks/venice/spl.c
index 6f6dea84feee..ad3af93143d9 100644
--- a/board/gateworks/venice/spl.c
+++ b/board/gateworks/venice/spl.c
@@ -366,16 +366,24 @@ unsigned long board_spl_mmc_get_uboot_raw_sector(struct mmc *mmc, unsigned long
 
 const char *spl_board_loader_name(u32 boot_device)
 {
+	static char name[16];
+	struct mmc *mmc;
+
 	switch (boot_device) {
 	/* SDHC2 */
 	case BOOT_DEVICE_MMC1:
-		return "eMMC";
+		mmc_init_device(0);
+		mmc = find_mmc_device(0);
+		mmc_init(mmc);
+		snprintf(name, sizeof(name), "eMMC %s", emmc_hwpart_names[EXT_CSD_EXTRACT_BOOT_PART(mmc->part_config)]);
+		return name;
 	/* SDHC3 */
 	case BOOT_DEVICE_MMC2:
-		return "SD card";
-	default:
-		return NULL;
+		sprintf(name, "SD card");
+		return name;
 	}
+
+	return NULL;
 }
 
 void spl_board_init(void)
-- 
2.25.1