[PATCH 0/6] usb: dwc3: gadget: avoid EP command timeout

[Mattijs Korpershoek]

Hi,

On Fri, 12 Apr 2024 22:26:00 +0200, A. Sverdlin wrote:
> From: Alexander Sverdlin <alexander.sverdlin at siemens.com>
> 
> While there are happy users who successfully have been using DFU on TI
> AM62x [1][2], there are also others who were not so lucky up to now [3].
> 
> I felt into latter category and was wondering why I observe this:
> 
> [...]

Thanks, Applied to https://source.denx.de/u-boot/custodians/u-boot-dfu (u-boot-dfu)

[1/6] usb: dwc3: gadget: combine return points into a single one
      https://source.denx.de/u-boot/custodians/u-boot-dfu/-/commit/13395507ca1f48de25e70f4d27f709b1a4fa0a82
[2/6] usb: dwc3: gadget: clear SUSPHY bit before ep cmds
      https://source.denx.de/u-boot/custodians/u-boot-dfu/-/commit/967b31c3ccdc09284a4447ebc4577bb7ef06d500
[3/6] usb: dwc3: gadget: only resume USB2 PHY in <=HIGHSPEED
      https://source.denx.de/u-boot/custodians/u-boot-dfu/-/commit/d107a5319e20d5e5be3bd8fa298aeca9ef4990a0
[4/6] usb: dwc3: gadget: Check ENBLSLPM before sending ep command
      https://source.denx.de/u-boot/custodians/u-boot-dfu/-/commit/db11351a887e20ff86e3a4c1f466d3d8dd42754a
[5/6] usb: dwc3: gadget: properly check ep cmd
      https://source.denx.de/u-boot/custodians/u-boot-dfu/-/commit/95b4d655a44626f888bf823a0561a175d456d33a
[6/6] usb: dwc3: gadget: Disable GUSB2PHYCFG.SUSPHY for End Transfer
      https://source.denx.de/u-boot/custodians/u-boot-dfu/-/commit/30f39de786ff3a87006461903e41a48c811ee764

--
Mattijs