[PATCH v3 2/4] ARM: dts: imx: Introduce SPL and FIT labels to i.MX8M DTs binman nodes
Marek Vasut
marex at denx.de
Thu May 16 23:28:40 CEST 2024
Add binman_imx_spl and binman_imx_fit labels to nxp-imx8mimage {} and fit {}
nodes respectively, so they can be referened in board DTs no matter how deep
in the top level binman image description they are. Update current board DTs
to use those labels.
Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: "NXP i.MX U-Boot Team" <uboot-imx at nxp.com>
Cc: Adam Ford <aford173 at gmail.com>
Cc: Alper Nebi Yasak <alpernebiyasak at gmail.com>
Cc: Andrejs Cainikovs <andrejs.cainikovs at toradex.com>
Cc: Angus Ainslie <angus at akkea.ca>
Cc: Emanuele Ghidoli <emanuele.ghidoli at toradex.com>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Francesco Dolcini <francesco.dolcini at toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Cc: Rasmus Villemoes <rasmus.villemoes at prevas.dk>
Cc: Simon Glass <sjg at chromium.org>
Cc: Stefan Eichenberger <stefan.eichenberger at toradex.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Tim Harvey <tharvey at gateworks.com>
Cc: Tom Rini <trini at konsulko.com>
Cc: kernel at puri.sm
Cc: u-boot at dh-electronics.com
Cc: u-boot at lists.denx.de
---
V2: New patch
V3: No change
---
arch/arm/dts/imx8mm-u-boot.dtsi | 4 +-
.../dts/imx8mm-verdin-wifi-dev-u-boot.dtsi | 8 +-
arch/arm/dts/imx8mn-u-boot.dtsi | 4 +-
arch/arm/dts/imx8mp-dhcom-u-boot.dtsi | 124 +++++++++---------
arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi | 26 ++--
arch/arm/dts/imx8mp-u-boot.dtsi | 4 +-
arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi | 10 +-
arch/arm/dts/imx8mq-u-boot.dtsi | 4 +-
8 files changed, 84 insertions(+), 100 deletions(-)
diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi
index 6ab8f66256e..b9b1193823a 100644
--- a/arch/arm/dts/imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-u-boot.dtsi
@@ -54,7 +54,7 @@
};
#endif
- nxp-imx8mimage {
+ binman_imx_spl: nxp-imx8mimage {
filename = "u-boot-spl-mkimage.bin";
nxp,boot-from = "sd";
nxp,rom-version = <1>;
@@ -98,7 +98,7 @@
};
};
- fit {
+ binman_imx_fit: fit {
description = "Configuration to load ATF before U-Boot";
#ifndef CONFIG_IMX_HAB
fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
diff --git a/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi b/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi
index 90183aff8bc..183de46f66a 100644
--- a/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi
@@ -35,12 +35,8 @@
bootph-pre-ram;
};
-&binman {
- section {
- fit {
- offset = <0x5fc00>;
- };
- };
+&binman_imx_fit {
+ offset = <0x5fc00>;
};
&gpio1 {
diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi
index ba9967dbe4a..c9fb33cfb73 100644
--- a/arch/arm/dts/imx8mn-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-u-boot.dtsi
@@ -103,7 +103,7 @@
};
#endif
- nxp-imx8mimage {
+ binman_imx_spl: nxp-imx8mimage {
filename = "u-boot-spl-mkimage.bin";
nxp,boot-from = "sd";
nxp,rom-version = <2>;
@@ -169,7 +169,7 @@
};
};
- fit {
+ binman_imx_fit: fit {
description = "Configuration to load ATF before U-Boot";
#ifndef CONFIG_IMX_HAB
fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
diff --git a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi
index cb37e28f28f..c065fb82994 100644
--- a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi
@@ -135,73 +135,69 @@
bootph-pre-ram;
};
-&binman {
- section {
- fit {
- images {
- fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast {
- description = "imx8mp-dhcom-som-overlay-eth1xfast";
- type = "flat_dt";
- compression = "none";
-
- blob-ext {
- filename = "imx8mp-dhcom-som-overlay-eth1xfast.dtbo";
- };
- };
-
- fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast {
- description = "imx8mp-dhcom-som-overlay-eth2xfast";
- type = "flat_dt";
- compression = "none";
-
- blob-ext {
- filename = "imx8mp-dhcom-som-overlay-eth2xfast.dtbo";
- };
- };
-
- fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast {
- description = "imx8mp-dhcom-pdk-overlay-eth2xfast";
- type = "flat_dt";
- compression = "none";
-
- blob-ext {
- filename = "imx8mp-dhcom-pdk-overlay-eth2xfast.dtbo";
- };
- };
-
- fdt-dto-imx8mp-dhcom-som-overlay-rev100 {
- description = "imx8mp-dhcom-som-overlay-rev100";
- type = "flat_dt";
- compression = "none";
-
- blob-ext {
- filename = "imx8mp-dhcom-som-overlay-rev100.dtbo";
- };
- };
-
- fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100 {
- description = "imx8mp-dhcom-pdk3-overlay-rev100";
- type = "flat_dt";
- compression = "none";
-
- blob-ext {
- filename = "imx8mp-dhcom-pdk3-overlay-rev100.dtbo";
- };
- };
+&binman_imx_fit {
+ images {
+ fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast {
+ description = "imx8mp-dhcom-som-overlay-eth1xfast";
+ type = "flat_dt";
+ compression = "none";
+
+ blob-ext {
+ filename = "imx8mp-dhcom-som-overlay-eth1xfast.dtbo";
};
+ };
+
+ fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast {
+ description = "imx8mp-dhcom-som-overlay-eth2xfast";
+ type = "flat_dt";
+ compression = "none";
+
+ blob-ext {
+ filename = "imx8mp-dhcom-som-overlay-eth2xfast.dtbo";
+ };
+ };
+
+ fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast {
+ description = "imx8mp-dhcom-pdk-overlay-eth2xfast";
+ type = "flat_dt";
+ compression = "none";
+
+ blob-ext {
+ filename = "imx8mp-dhcom-pdk-overlay-eth2xfast.dtbo";
+ };
+ };
- configurations {
- default = "@config-DEFAULT-SEQ";
-
- @config-SEQ {
- fdt = "fdt-1",
- "fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast",
- "fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast",
- "fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast",
- "fdt-dto-imx8mp-dhcom-som-overlay-rev100",
- "fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100";
- };
+ fdt-dto-imx8mp-dhcom-som-overlay-rev100 {
+ description = "imx8mp-dhcom-som-overlay-rev100";
+ type = "flat_dt";
+ compression = "none";
+
+ blob-ext {
+ filename = "imx8mp-dhcom-som-overlay-rev100.dtbo";
+ };
+ };
+
+ fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100 {
+ description = "imx8mp-dhcom-pdk3-overlay-rev100";
+ type = "flat_dt";
+ compression = "none";
+
+ blob-ext {
+ filename = "imx8mp-dhcom-pdk3-overlay-rev100.dtbo";
};
};
};
+
+ configurations {
+ default = "@config-DEFAULT-SEQ";
+
+ @config-SEQ {
+ fdt = "fdt-1",
+ "fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast",
+ "fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast",
+ "fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast",
+ "fdt-dto-imx8mp-dhcom-som-overlay-rev100",
+ "fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100";
+ };
+ };
};
diff --git a/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi b/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi
index aff5dcf615d..21eff6d6ad4 100644
--- a/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi
@@ -135,21 +135,17 @@
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_400M>;
};
-&binman {
- section {
- fit {
- images {
- fip {
- description = "Trusted Firmware FIP";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- load = <0x40310000>;
-
- fip_blob: blob-ext{
- filename = "fip.bin";
- };
- };
+&binman_imx_fit {
+ images {
+ fip {
+ description = "Trusted Firmware FIP";
+ type = "firmware";
+ arch = "arm64";
+ compression = "none";
+ load = <0x40310000>;
+
+ fip_blob: blob-ext{
+ filename = "fip.bin";
};
};
};
diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi
index c4c1a177102..8b5ac3faf1c 100644
--- a/arch/arm/dts/imx8mp-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-u-boot.dtsi
@@ -86,7 +86,7 @@
section {
pad-byte = <0x00>;
- nxp-imx8mimage {
+ binman_imx_spl: nxp-imx8mimage {
filename = "u-boot-spl-mkimage.bin";
nxp,boot-from = "sd";
nxp,rom-version = <2>;
@@ -129,7 +129,7 @@
};
};
- fit {
+ binman_imx_fit: fit {
description = "Configuration to load ATF before U-Boot";
#ifndef CONFIG_IMX_HAB
fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
diff --git a/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi b/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi
index 1a4568dac65..98da015a444 100644
--- a/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi
+++ b/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi
@@ -10,14 +10,10 @@
bootph-pre-ram;
};
-&binman {
+&binman_imx_spl {
section {
- nxp-imx8mimage {
- section {
- signed-hdmi-imx8m {
- filename = "signed_dp_imx8m.bin";
- };
- };
+ signed-hdmi-imx8m {
+ filename = "signed_dp_imx8m.bin";
};
};
};
diff --git a/arch/arm/dts/imx8mq-u-boot.dtsi b/arch/arm/dts/imx8mq-u-boot.dtsi
index 48dbe94f0c4..72da674d245 100644
--- a/arch/arm/dts/imx8mq-u-boot.dtsi
+++ b/arch/arm/dts/imx8mq-u-boot.dtsi
@@ -38,7 +38,7 @@
section {
pad-byte = <0x00>;
- nxp-imx8mimage {
+ binman_imx_spl: nxp-imx8mimage {
filename = "u-boot-spl-mkimage.bin";
nxp,boot-from = "sd";
nxp,rom-version = <1>;
@@ -87,7 +87,7 @@
};
};
- fit {
+ binman_imx_fit: fit {
description = "Configuration to load ATF before U-Boot";
#ifndef CONFIG_IMX_HAB
fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
--
2.43.0
More information about the U-Boot
mailing list