[RESEND PATCH 4/4] omap3: igep0x00: Migrate to use upstream DT
Javier Martinez Canillas
javierm at redhat.com
Sat May 18 14:02:32 CEST 2024
Enable OF_UPSTREAM to use upstream DT and add a ti/omap/ prefix to the
DEFAULT_DEVICE_TREE config option.
That way, a DTS from the upstream dts/upstream/src/ directory is used
instead of the arch/$(ARCH)/dts/ directory. These in turn are removed.
Signed-off-by: Javier Martinez Canillas <javierm at redhat.com>
---
arch/arm/dts/Makefile | 3 -
arch/arm/dts/omap3-igep.dtsi | 247 ----------------------
arch/arm/dts/omap3-igep0020-common.dtsi | 261 ------------------------
arch/arm/dts/omap3-igep0020.dts | 47 -----
configs/igep00x0_defconfig | 3 +-
5 files changed, 2 insertions(+), 559 deletions(-)
delete mode 100644 arch/arm/dts/omap3-igep.dtsi
delete mode 100644 arch/arm/dts/omap3-igep0020-common.dtsi
delete mode 100644 arch/arm/dts/omap3-igep0020.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index a5c82ebf7a5f..a9bd4921718e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1030,9 +1030,6 @@ dtb-$(CONFIG_TARGET_OMAP3_BEAGLE) += \
dtb-$(CONFIG_TARGET_DEVKIT8000) += omap3-devkit8000.dtb
-dtb-$(CONFIG_TARGET_OMAP3_IGEP00X0) += \
- omap3-igep0020.dtb
-
dtb-$(CONFIG_TARGET_OMAP4_PANDA) += \
omap4-panda.dtb \
omap4-panda-es.dtb
diff --git a/arch/arm/dts/omap3-igep.dtsi b/arch/arm/dts/omap3-igep.dtsi
deleted file mode 100644
index 219202610463..000000000000
--- a/arch/arm/dts/omap3-igep.dtsi
+++ /dev/null
@@ -1,247 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Common device tree for IGEP boards based on AM/DM37x
- *
- * Copyright (C) 2012 Javier Martinez Canillas <javier at dowhile0.org>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo at gmail.com>
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-
-/ {
- memory at 80000000 {
- device_type = "memory";
- reg = <0x80000000 0x20000000>; /* 512 MB */
- };
-
- chosen {
- stdout-path = &uart3;
- };
-
- sound {
- compatible = "ti,omap-twl4030";
- ti,model = "igep2";
- ti,mcbsp = <&mcbsp2>;
- };
-
- vdd33: regulator-vdd33 {
- compatible = "regulator-fixed";
- regulator-name = "vdd33";
- regulator-always-on;
- };
-
-};
-
-&omap3_pmx_core {
- gpmc_pins: pinmux_gpmc_pins {
- pinctrl-single,pins = <
- /* OneNAND seems to require PIN_INPUT on clock. */
- OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
- >;
- };
-
- uart1_pins: pinmux_uart1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
- OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
- >;
- };
-
- uart3_pins: pinmux_uart3_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
- OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
- >;
- };
-
- mcbsp2_pins: pinmux_mcbsp2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
- OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */
- OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */
- OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */
- >;
- };
-
- mmc1_pins: pinmux_mmc1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
- OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
- >;
- };
-
- mmc2_pins: pinmux_mmc2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
- OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
- OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
- OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
- OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
- OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
- >;
- };
-
- i2c1_pins: pinmux_i2c1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
- OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
- >;
- };
-
- i2c3_pins: pinmux_i2c3_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
- OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
- >;
- };
-};
-
-&gpmc {
- pinctrl-names = "default";
- pinctrl-0 = <&gpmc_pins>;
-
- nand at 0,0 {
- compatible = "ti,omap2-nand";
- reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
- interrupt-parent = <&gpmc>;
- interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
- <1 IRQ_TYPE_NONE>; /* termcount */
- linux,mtd-name = "micron,mt29c4g96maz";
- nand-bus-width = <16>;
- gpmc,device-width = <2>;
- ti,nand-ecc-opt = "bch8";
-
- gpmc,sync-clk-ps = <0>;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <44>;
- gpmc,cs-wr-off-ns = <44>;
- gpmc,adv-on-ns = <6>;
- gpmc,adv-rd-off-ns = <34>;
- gpmc,adv-wr-off-ns = <44>;
- gpmc,we-off-ns = <40>;
- gpmc,oe-off-ns = <54>;
- gpmc,access-ns = <64>;
- gpmc,rd-cycle-ns = <82>;
- gpmc,wr-cycle-ns = <82>;
- gpmc,wr-access-ns = <40>;
- gpmc,wr-data-mux-bus-ns = <0>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- status = "okay";
- };
-
- onenand at 0,0 {
- compatible = "ti,omap2-onenand";
- reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
-
- gpmc,sync-read;
- gpmc,sync-write;
- gpmc,burst-length = <16>;
- gpmc,burst-wrap;
- gpmc,burst-read;
- gpmc,burst-write;
- gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
- gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <96>;
- gpmc,cs-wr-off-ns = <96>;
- gpmc,adv-on-ns = <0>;
- gpmc,adv-rd-off-ns = <12>;
- gpmc,adv-wr-off-ns = <12>;
- gpmc,oe-on-ns = <18>;
- gpmc,oe-off-ns = <96>;
- gpmc,we-on-ns = <0>;
- gpmc,we-off-ns = <96>;
- gpmc,rd-cycle-ns = <114>;
- gpmc,wr-cycle-ns = <114>;
- gpmc,access-ns = <90>;
- gpmc,page-burst-access-ns = <12>;
- gpmc,bus-turnaround-ns = <0>;
- gpmc,cycle2cycle-delay-ns = <0>;
- gpmc,wait-monitoring-ns = <0>;
- gpmc,clk-activation-ns = <6>;
- gpmc,wr-data-mux-bus-ns = <30>;
- gpmc,wr-access-ns = <90>;
- gpmc,sync-clk-ps = <12000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- status = "disabled";
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- clock-frequency = <2600000>;
-
- twl: twl at 48 {
- reg = <0x48>;
- interrupts = <7>; /* SYS_NIRQ cascaded to intc */
- interrupt-parent = <&intc>;
-
- twl_audio: audio {
- compatible = "ti,twl4030-audio";
- codec {
- };
- };
- };
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c3 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins>;
-};
-
-&mcbsp2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcbsp2_pins>;
- status = "okay";
-};
-
-&mmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
- vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
- bus-width = <4>;
- cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
-};
-
-&mmc3 {
- status = "disabled";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
-};
-
-&twl_gpio {
- ti,use-leds;
-};
-
-&usb_otg_hs {
- interface-type = <0>;
- usb-phy = <&usb2_phy>;
- phys = <&usb2_phy>;
- phy-names = "usb2-phy";
- mode = <3>;
- power = <50>;
-};
diff --git a/arch/arm/dts/omap3-igep0020-common.dtsi b/arch/arm/dts/omap3-igep0020-common.dtsi
deleted file mode 100644
index 73d8f471b9ec..000000000000
--- a/arch/arm/dts/omap3-igep0020-common.dtsi
+++ /dev/null
@@ -1,261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Common Device Tree Source for IGEPv2
- *
- * Copyright (C) 2014 Javier Martinez Canillas <javier at dowhile0.org>
- * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo at gmail.com>
- */
-
-#include "omap3-igep.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-
-/ {
-
- leds {
- pinctrl-names = "default";
- pinctrl-0 = <&leds_pins>;
- compatible = "gpio-leds";
-
- boot {
- label = "omap3:green:boot";
- gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- user0 {
- label = "omap3:red:user0";
- gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- user1 {
- label = "omap3:red:user1";
- gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- user2 {
- label = "omap3:green:user1";
- gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
- };
- };
-
- /* HS USB Port 1 Power */
- hsusb1_power: hsusb1_power_reg {
- compatible = "regulator-fixed";
- regulator-name = "hsusb1_vbus";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */
- startup-delay-us = <70000>;
- };
-
- /* HS USB Host PHY on PORT 1 */
- hsusb1_phy: hsusb1_phy {
- compatible = "usb-nop-xceiv";
- reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
- vcc-supply = <&hsusb1_power>;
- #phy-cells = <0>;
- };
-
- tfp410: encoder {
- compatible = "ti,tfp410";
- powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
-
- tfp410_in: endpoint {
- remote-endpoint = <&dpi_out>;
- };
- };
-
- port at 1 {
- reg = <1>;
-
- tfp410_out: endpoint {
- remote-endpoint = <&dvi_connector_in>;
- };
- };
- };
- };
-
- dvi0: connector {
- compatible = "dvi-connector";
- label = "dvi";
-
- digital;
-
- ddc-i2c-bus = <&i2c3>;
-
- port {
- dvi_connector_in: endpoint {
- remote-endpoint = <&tfp410_out>;
- };
- };
- };
-};
-
-&omap3_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <
- &tfp410_pins
- &dss_dpi_pins
- >;
-
- tfp410_pins: pinmux_tfp410_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
- >;
- };
-
- dss_dpi_pins: pinmux_dss_dpi_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
- OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
- OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
- OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
- OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
- OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
- OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
- OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
- OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
- OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
- OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
- OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
- OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
- OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
- OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
- OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
- OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
- OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
- OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
- OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
- OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
- OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
- OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
- OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
- OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
- OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
- OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
- OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
- >;
- };
-
- uart2_pins: pinmux_uart2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
- OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
- OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
- OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
- >;
- };
-
- smsc9221_pins: pinmux_smsc9221_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
- >;
- };
-};
-
-&omap3_pmx_core2 {
- pinctrl-names = "default";
- pinctrl-0 = <
- &hsusbb1_pins
- >;
-
- hsusbb1_pins: pinmux_hsusbb1_pins {
- pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
- OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
- OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
- OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
- OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
- OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
- OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
- OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
- OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
- OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
- OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
- OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
- >;
- };
-
- leds_pins: pinmux_leds_pins {
- pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
- OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
- OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
- >;
- };
-
- mmc1_wp_pins: pinmux_mmc1_cd_pins {
- pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4) /* etk_d15.gpio_29 */
- >;
- };
-};
-
-&i2c3 {
- clock-frequency = <100000>;
-
- /*
- * Display monitor features are burnt in the EEPROM
- * as EDID data.
- */
- eeprom at 50 {
- compatible = "ti,eeprom";
- reg = <0x50>;
- };
-};
-
-&gpmc {
- ranges = <0 0 0x30000000 0x01000000>, /* CS0: 16MB for NAND */
- <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for ethernet */
-
- ethernet at gpmc {
- pinctrl-names = "default";
- pinctrl-0 = <&smsc9221_pins>;
- reg = <5 0 0xff>;
- interrupt-parent = <&gpio6>;
- interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
-};
-
-&usbhshost {
- port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
- phys = <&hsusb1_phy>;
-};
-
-&vpll2 {
- /* Needed for DSS */
- regulator-name = "vdds_dsi";
-};
-
-&dss {
- status = "okay";
-
- port {
- dpi_out: endpoint {
- remote-endpoint = <&tfp410_in>;
- data-lines = <24>;
- };
- };
-};
-
-&mmc1 {
- pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>;
- wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; /* gpio_29 */
-};
diff --git a/arch/arm/dts/omap3-igep0020.dts b/arch/arm/dts/omap3-igep0020.dts
deleted file mode 100644
index cf3ac847431e..000000000000
--- a/arch/arm/dts/omap3-igep0020.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x)
- *
- * Copyright (C) 2012 Javier Martinez Canillas <javier at dowhile0.org>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo at gmail.com>
- */
-
-#include "omap3-igep0020-common.dtsi"
-
-/ {
- model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
- compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
-
- vmmcsdio_fixed: fixedregulator-mmcsdio {
- compatible = "regulator-fixed";
- regulator-name = "vmmcsdio_fixed";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- mmc2_pwrseq: mmc2_pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>, /* gpio_139 - RESET_N_W */
- <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 - WIFI_PDN */
- };
-};
-
-&omap3_pmx_core {
- lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */
- OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 - WIFI_PDN */
- OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */
- >;
- };
-};
-
-/* On board Wifi module */
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
- vmmc-supply = <&vmmcsdio_fixed>;
- mmc-pwrseq = <&mmc2_pwrseq>;
- bus-width = <4>;
- non-removable;
-};
diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig
index c1b873a17efb..87fd2797eace 100644
--- a/configs/igep00x0_defconfig
+++ b/configs/igep00x0_defconfig
@@ -8,7 +8,7 @@ CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
CONFIG_ENV_SIZE=0x8000
-CONFIG_DEFAULT_DEVICE_TREE="omap3-igep0020"
+CONFIG_DEFAULT_DEVICE_TREE="ti/omap/omap3-igep0020"
CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_OMAP3_IGEP00X0=y
CONFIG_SYS_MONITOR_LEN=262144
@@ -56,6 +56,7 @@ CONFIG_CMD_UBI=y
CONFIG_SPL_PARTITION_UUIDS=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent"
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_UBI=y
--
2.45.0
More information about the U-Boot
mailing list