[PATCH] ARM: dts: imx8mm: Update iMX8MM Menlo board configuration

[Peng Fan]

> Subject: [PATCH] ARM: dts: imx8mm: Update iMX8MM Menlo board
> configuration
> 
> Synchronize Toradex Verdin iMX8MM based MX8Menlo board configuration
> with Toradex Verdin iMX8MM and enable convenience commands like cat,
> hexdump, xxd.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>

Reviewed-by: Peng Fan <peng.fan at nxp.com>
> ---
> Cc: "NXP i.MX U-Boot Team" <uboot-imx at nxp.com>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Francesco Dolcini <francesco.dolcini at toradex.com>
> Cc: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> Cc: Philippe Schenker <philippe.schenker at toradex.com>
> Cc: Martyn Welch <martyn.welch at collabora.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: u-boot at lists.denx.de
> ---
>  configs/imx8mm-mx8menlo_defconfig | 28 ++++++++++++++++++++++++++--
>  1 file changed, 26 insertions(+), 2 deletions(-)
> 
> diff --git a/configs/imx8mm-mx8menlo_defconfig b/configs/imx8mm-
> mx8menlo_defconfig
> index 1ed7f0a2259..2fbd25491f7 100644
> --- a/configs/imx8mm-mx8menlo_defconfig
> +++ b/configs/imx8mm-mx8menlo_defconfig
> @@ -22,15 +22,19 @@ CONFIG_SPL_STACK=0x920000  CONFIG_SPL=y
> CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
>  CONFIG_ENV_OFFSET_REDUND=0xFFFFDE00
> +CONFIG_IMX_BOOTAUX=y
>  CONFIG_SYS_LOAD_ADDR=0x40480000
>  CONFIG_SYS_MEMTEST_START=0x40000000
>  CONFIG_SYS_MEMTEST_END=0x80000000
>  CONFIG_FIT=y
>  CONFIG_FIT_EXTERNAL_OFFSET=0x3000
> +CONFIG_FIT_VERBOSE=y
>  CONFIG_SPL_LOAD_FIT=y
>  CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_BOOTDELAY=1
>  CONFIG_OF_SYSTEM_SETUP=y
>  CONFIG_BOOTCOMMAND="mmc partconf 0 distro_bootpart && load
> ${devtype} ${devnum}:${distro_bootpart} ${loadaddr} boot/fitImage &&
> source ${loadaddr}:bootscr-boot.cmd ; reset"
> +CONFIG_USE_PREBOOT=y
>  CONFIG_DEFAULT_FDT_FILE="imx8mm-mx8menlo.dtb"
>  CONFIG_SYS_CBSIZE=2048
>  CONFIG_SYS_PBSIZE=2081
> @@ -57,19 +61,26 @@ CONFIG_SYS_PROMPT="Verdin iMX8MM # "
>  # CONFIG_BOOTM_NETBSD is not set
>  CONFIG_CMD_ASKENV=y
>  # CONFIG_CMD_EXPORTENV is not set
> -# CONFIG_CMD_CRC32 is not set
> +CONFIG_CRC32_VERIFY=y
> +CONFIG_CMD_MD5SUM=y
> +CONFIG_MD5SUM_VERIFY=y
>  CONFIG_CMD_MEMTEST=y
>  CONFIG_CMD_CLK=y
>  CONFIG_CMD_FUSE=y
>  CONFIG_CMD_GPIO=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
> +CONFIG_CMD_READ=y
>  CONFIG_CMD_USB=y
>  CONFIG_CMD_USB_SDP=y
>  CONFIG_CMD_USB_MASS_STORAGE=y
> +CONFIG_CMD_CAT=y
> +CONFIG_CMD_XXD=y
>  CONFIG_CMD_BOOTCOUNT=y
>  CONFIG_CMD_CACHE=y
> +CONFIG_CMD_TIME=y
>  CONFIG_CMD_UUID=y
> +CONFIG_CMD_PMIC=y
>  CONFIG_CMD_REGULATOR=y
>  CONFIG_CMD_BTRFS=y
>  CONFIG_CMD_EXT4_WRITE=y
> @@ -84,8 +95,9 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>  CONFIG_SYS_MMC_ENV_PART=1
>  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
>  CONFIG_USE_ETHPRIME=y
> -CONFIG_ETHPRIME="FEC"
> +CONFIG_ETHPRIME="eth0"
>  CONFIG_VERSION_VARIABLE=y
> +CONFIG_NET_RANDOM_ETHADDR=y
>  CONFIG_IP_DEFRAG=y
>  CONFIG_TFTP_BLOCKSIZE=4096
>  CONFIG_SPL_DM=y
> @@ -96,16 +108,26 @@ CONFIG_CLK_COMPOSITE_CCF=y
> CONFIG_SPL_CLK_IMX8MM=y  CONFIG_CLK_IMX8MM=y
> CONFIG_GPIO_HOG=y
> +CONFIG_SPL_GPIO_HOG=y
>  CONFIG_MXC_GPIO=y
>  CONFIG_DM_I2C=y
>  CONFIG_MISC=y
>  CONFIG_I2C_EEPROM=y
>  CONFIG_SUPPORT_EMMC_BOOT=y
> +CONFIG_MMC_IO_VOLTAGE=y
> +CONFIG_SPL_MMC_IO_VOLTAGE=y
> +CONFIG_MMC_UHS_SUPPORT=y
> +CONFIG_SPL_MMC_UHS_SUPPORT=y
> +CONFIG_MMC_HS400_ES_SUPPORT=y
> +CONFIG_MMC_HS400_SUPPORT=y
> +CONFIG_SPL_MMC_HS400_SUPPORT=y
>  CONFIG_FSL_USDHC=y
>  CONFIG_PHYLIB=y
>  CONFIG_PHY_ADDR_ENABLE=y
>  CONFIG_PHY_MICREL=y
>  CONFIG_PHY_MICREL_KSZ90X1=y
> +CONFIG_PHY_FIXED=y
> +CONFIG_DM_MDIO=y
>  CONFIG_FEC_MXC=y
>  CONFIG_MII=y
>  CONFIG_SPL_PHY=y
> @@ -128,6 +150,7 @@ CONFIG_SPL_SYSRESET=y  CONFIG_SYSRESET_PSCI=y
> CONFIG_SYSRESET_WATCHDOG=y  CONFIG_DM_THERMAL=y
> +CONFIG_IMX_TMU=y
>  CONFIG_USB=y
>  CONFIG_SPL_USB_HOST=y
>  CONFIG_USB_EHCI_HCD=y
> @@ -143,3 +166,4 @@ CONFIG_SDP_LOADADDR=0x40400000
> CONFIG_USB_GADGET_DOWNLOAD=y  CONFIG_SPL_USB_SDP_SUPPORT=y
> CONFIG_IMX_WATCHDOG=y
> +CONFIG_HEXDUMP=y
> --
> 2.43.0