[PATCH] ARM: imx: mx5: Enable BMODE command on MX53 Menlo board

[Peng Fan]

> Subject: [PATCH] ARM: imx: mx5: Enable BMODE command on MX53 Menlo
> board
> 
> The board can do primary/secondary boot switching, enable the bmode
> command.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>

Reviewed-by: Peng Fan <peng.fan at nxp.com>
> ---
> Cc: "NXP i.MX U-Boot Team" <uboot-imx at nxp.com>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: u-boot at lists.denx.de
> ---
>  configs/m53menlo_defconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig
> index b06a614dde0..d6b47240c10 100644
> --- a/configs/m53menlo_defconfig
> +++ b/configs/m53menlo_defconfig
> @@ -22,6 +22,7 @@ CONFIG_SPL=y
>  CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
>  CONFIG_ENV_OFFSET_REDUND=0x180000
>  CONFIG_SYS_LOAD_ADDR=0x70800000
> +CONFIG_CMD_BMODE=y
>  CONFIG_FIT=y
>  CONFIG_BOOTDELAY=-2
>  CONFIG_OF_BOARD_SETUP=y
> --
> 2.43.0