[PATCH 0/4] Adding support to load secure firmware for HS devices

[Andy Shevchenko]

On Tue, May 21, 2024 at 04:26:44PM +0530, Udit Kumar wrote:
> Some use case needs rproc firmware to be loaded at u-boot stage,
> using following commands at u-boot shell, firmware could be loaded
> 
> => setenv dorprocboot 1
> => run boot_rprocs
> 
> For Secure devices, secure version of rproc firmware should be loaded,
> which is appended by sec keyword[0].
> but currently non-secure firmware is loaded even for secure devices.
> So adding support for loading secure firmware on Secured devices.

Are you Cc'ing random people with this?
Please don't do it.

-- 
With Best Regards,
Andy Shevchenko