[PATCH v2 3/5] arm: mach-k3: am625: Call do_board_detect() before DDR probing

Wadim Egorov w.egorov at phytec.de
Wed May 22 09:55:03 CEST 2024


Call do_board_detect() hook before the K3 DDRSS driver gets probed.
It will allow boards to adjust DDR timings in do_board_detect().

Signed-off-by: Wadim Egorov <w.egorov at phytec.de>
Tested-by: John Ma <jma at phytec.com>
---
 arch/arm/mach-k3/am62x/am625_init.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-k3/am62x/am625_init.c b/arch/arm/mach-k3/am62x/am625_init.c
index ed8d24e0433..72a752d38e8 100644
--- a/arch/arm/mach-k3/am62x/am625_init.c
+++ b/arch/arm/mach-k3/am62x/am625_init.c
@@ -213,6 +213,8 @@ void board_init_f(ulong dummy)
 
 	preloader_console_init();
 
+	do_board_detect();
+
 	/*
 	 * Allow establishing an early console as required for example when
 	 * doing a UART-based boot. Note that this console may not "survive"
-- 
2.34.1



More information about the U-Boot mailing list