[PATCH 2/2 V2] board: rockchip: rgxx3: Use sdmmc0 as first device

[Kever Yang]

On 2024/5/21 23:45, Chris Morgan wrote:
> From: Chris Morgan <macromorgan at hotmail.com>
>
> Some of the rgxx3 devices do not have a way to recover from a poor
> flash of a bootloader to eMMC. Set the device to always attempt to boot
> from sdmmc0 first which ensures that we can override the boot from
> emmc if we have a card present with a valid fit signature. The
> expectation is that this will protect from the very unlikely chance
> we have a valid FIT signature on the eMMC but the U-Boot stage fails
> for some other reason.
>
> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi b/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
> index 793ed4ae8a..c7e849816a 100644
> --- a/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
> +++ b/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
> @@ -4,7 +4,7 @@
>   
>   / {
>   	chosen {
> -		u-boot,spl-boot-order = "same-as-spl", &sdmmc1, &sdmmc0;
> +		u-boot,spl-boot-order = &sdmmc0, &sdhci;
>   	};
>   };
>