[PATCH v3 7/8] board: ti: Pull redundant DDR functions to a common location and Fixup DDR size when ECC is enabled
Santhosh Kumar K
s-k6 at ti.com
Thu May 23 07:04:29 CEST 2024
As there are few redundant functions in board/ti/*/evm.c files, pull
them to a common location of access to reuse and include the common file
to access the functions.
Call k3-ddrss driver through fixup_ddr_driver_for_ecc() to fixup the
device tree and resize the available amount of DDR, if ECC is enabled.
Otherwise, fixup the device tree using the regular
fdt_fixup_memory_banks().
Also call dram_init_banksize() after every call to
fixup_ddr_driver_for_ecc() is made so that gd->bd is populated
correctly.
Ensure that fixup_ddr_driver_for_ecc() is agnostic to the number of DDR
controllers present.
Signed-off-by: Santhosh Kumar K <s-k6 at ti.com>
Signed-off-by: Neha Malcom Francis <n-francis at ti.com>
---
board/ti/am62ax/evm.c | 17 ++++---
board/ti/am62px/evm.c | 18 ++++---
board/ti/am62x/evm.c | 63 ++++---------------------
board/ti/am64x/evm.c | 73 +++-------------------------
board/ti/am65x/evm.c | 29 +-----------
board/ti/common/Makefile | 1 +
board/ti/common/k3-ddr-init.c | 89 +++++++++++++++++++++++++++++++++++
board/ti/common/k3-ddr-init.h | 15 ++++++
board/ti/j721e/evm.c | 29 +-----------
board/ti/j721s2/evm.c | 35 ++++----------
board/ti/j784s4/evm.c | 17 ++++---
11 files changed, 163 insertions(+), 223 deletions(-)
create mode 100644 board/ti/common/k3-ddr-init.c
create mode 100644 board/ti/common/k3-ddr-init.h
diff --git a/board/ti/am62ax/evm.c b/board/ti/am62ax/evm.c
index 62d3664936e7..3d7bd369a452 100644
--- a/board/ti/am62ax/evm.c
+++ b/board/ti/am62ax/evm.c
@@ -14,21 +14,24 @@
#include <spl.h>
#include "../common/fdt_ops.h"
+#include "../common/k3-ddr-init.h"
int board_init(void)
{
return 0;
}
-int dram_init(void)
+#if defined(CONFIG_SPL_BUILD)
+void spl_perform_fixups(struct spl_image_info *spl_image)
{
- return fdtdec_setup_mem_size_base();
-}
-
-int dram_init_banksize(void)
-{
- return fdtdec_setup_memory_banksize();
+ if (IS_ENABLED(CONFIG_K3_DDRSS)) {
+ if (IS_ENABLED(CONFIG_K3_INLINE_ECC))
+ fixup_ddr_driver_for_ecc(spl_image);
+ } else {
+ fixup_memory_node(spl_image);
+ }
}
+#endif
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
diff --git a/board/ti/am62px/evm.c b/board/ti/am62px/evm.c
index 97a95ce8cc2d..aa7db61eb411 100644
--- a/board/ti/am62px/evm.c
+++ b/board/ti/am62px/evm.c
@@ -13,17 +13,21 @@
#include <fdt_support.h>
#include <spl.h>
+#include "../common/k3-ddr-init.h"
+
int board_init(void)
{
return 0;
}
-int dram_init(void)
-{
- return fdtdec_setup_mem_size_base();
-}
-
-int dram_init_banksize(void)
+#if defined(CONFIG_SPL_BUILD)
+void spl_perform_fixups(struct spl_image_info *spl_image)
{
- return fdtdec_setup_memory_banksize();
+ if (IS_ENABLED(CONFIG_K3_DDRSS)) {
+ if (IS_ENABLED(CONFIG_K3_INLINE_ECC))
+ fixup_ddr_driver_for_ecc(spl_image);
+ } else {
+ fixup_memory_node(spl_image);
+ }
}
+#endif
diff --git a/board/ti/am62x/evm.c b/board/ti/am62x/evm.c
index b3e8680dfab2..32ba37963212 100644
--- a/board/ti/am62x/evm.c
+++ b/board/ti/am62x/evm.c
@@ -21,6 +21,8 @@
#include "../common/fdt_ops.h"
+#include "../common/k3-ddr-init.h"
+
DECLARE_GLOBAL_DATA_PTR;
#if CONFIG_IS_ENABLED(SPLASH_SCREEN)
@@ -51,11 +53,6 @@ int board_init(void)
return 0;
}
-int dram_init(void)
-{
- return fdtdec_setup_mem_size_base();
-}
-
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
@@ -64,11 +61,6 @@ int board_late_init(void)
}
#endif
-int dram_init_banksize(void)
-{
- return fdtdec_setup_memory_banksize();
-}
-
#if defined(CONFIG_SPL_BUILD)
void spl_board_init(void)
@@ -79,52 +71,13 @@ void spl_board_init(void)
}
-#if defined(CONFIG_K3_AM64_DDRSS)
-static void fixup_ddr_driver_for_ecc(struct spl_image_info *spl_image)
-{
- struct udevice *dev;
- int ret;
-
- dram_init_banksize();
-
- ret = uclass_get_device(UCLASS_RAM, 0, &dev);
- if (ret)
- panic("Cannot get RAM device for ddr size fixup: %d\n", ret);
-
- ret = k3_ddrss_ddr_fdt_fixup(dev, spl_image->fdt_addr, gd->bd);
- if (ret)
- printf("Error fixing up ddr node for ECC use! %d\n", ret);
-}
-#else
-static void fixup_memory_node(struct spl_image_info *spl_image)
-{
- u64 start[CONFIG_NR_DRAM_BANKS];
- u64 size[CONFIG_NR_DRAM_BANKS];
- int bank;
- int ret;
-
- dram_init();
- dram_init_banksize();
-
- for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
- start[bank] = gd->bd->bi_dram[bank].start;
- size[bank] = gd->bd->bi_dram[bank].size;
- }
-
- /* dram_init functions use SPL fdt, and we must fixup u-boot fdt */
- ret = fdt_fixup_memory_banks(spl_image->fdt_addr, start, size,
- CONFIG_NR_DRAM_BANKS);
- if (ret)
- printf("Error fixing up memory node! %d\n", ret);
-}
-#endif
-
void spl_perform_fixups(struct spl_image_info *spl_image)
{
-#if defined(CONFIG_K3_AM64_DDRSS)
- fixup_ddr_driver_for_ecc(spl_image);
-#else
- fixup_memory_node(spl_image);
-#endif
+ if (IS_ENABLED(CONFIG_K3_DDRSS)) {
+ if (IS_ENABLED(CONFIG_K3_INLINE_ECC))
+ fixup_ddr_driver_for_ecc(spl_image);
+ } else {
+ fixup_memory_node(spl_image);
+ }
}
#endif
diff --git a/board/ti/am64x/evm.c b/board/ti/am64x/evm.c
index b8de69da06c5..e63f2d028263 100644
--- a/board/ti/am64x/evm.c
+++ b/board/ti/am64x/evm.c
@@ -17,6 +17,7 @@
#include "../common/board_detect.h"
#include "../common/fdt_ops.h"
+#include "../common/k3-ddr-init.h"
#define board_is_am64x_gpevm() (board_ti_k3_is("AM64-GPEVM") || \
board_ti_k3_is("AM64-EVM") || \
@@ -32,28 +33,6 @@ int board_init(void)
return 0;
}
-int dram_init(void)
-{
- s32 ret;
-
- ret = fdtdec_setup_mem_size_base();
- if (ret)
- printf("Error setting up mem size and base. %d\n", ret);
-
- return ret;
-}
-
-int dram_init_banksize(void)
-{
- s32 ret;
-
- ret = fdtdec_setup_memory_banksize();
- if (ret)
- printf("Error setting up memory banksize. %d\n", ret);
-
- return ret;
-}
-
#if defined(CONFIG_SPL_LOAD_FIT)
int board_fit_config_name_match(const char *name)
{
@@ -98,52 +77,14 @@ static int fixup_usb_boot(const void *fdt_blob)
}
#endif
-#if defined(CONFIG_K3_AM64_DDRSS)
-static void fixup_ddr_driver_for_ecc(struct spl_image_info *spl_image)
-{
- struct udevice *dev;
- int ret;
-
- dram_init_banksize();
-
- ret = uclass_get_device(UCLASS_RAM, 0, &dev);
- if (ret)
- panic("Cannot get RAM device for ddr size fixup: %d\n", ret);
-
- ret = k3_ddrss_ddr_fdt_fixup(dev, spl_image->fdt_addr, gd->bd);
- if (ret)
- printf("Error fixing up ddr node for ECC use! %d\n", ret);
-}
-#else
-static void fixup_memory_node(struct spl_image_info *spl_image)
-{
- u64 start[CONFIG_NR_DRAM_BANKS];
- u64 size[CONFIG_NR_DRAM_BANKS];
- int bank;
- int ret;
-
- dram_init();
- dram_init_banksize();
-
- for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
- start[bank] = gd->bd->bi_dram[bank].start;
- size[bank] = gd->bd->bi_dram[bank].size;
- }
-
- /* dram_init functions use SPL fdt, and we must fixup u-boot fdt */
- ret = fdt_fixup_memory_banks(spl_image->fdt_addr, start, size, CONFIG_NR_DRAM_BANKS);
- if (ret)
- printf("Error fixing up memory node! %d\n", ret);
-}
-#endif
-
void spl_perform_fixups(struct spl_image_info *spl_image)
{
-#if defined(CONFIG_K3_AM64_DDRSS)
- fixup_ddr_driver_for_ecc(spl_image);
-#else
- fixup_memory_node(spl_image);
-#endif
+ if (IS_ENABLED(CONFIG_K3_DDRSS)) {
+ if (IS_ENABLED(CONFIG_K3_INLINE_ECC))
+ fixup_ddr_driver_for_ecc(spl_image);
+ } else {
+ fixup_memory_node(spl_image);
+ }
#if CONFIG_IS_ENABLED(USB_STORAGE)
fixup_usb_boot(spl_image->fdt_addr);
diff --git a/board/ti/am65x/evm.c b/board/ti/am65x/evm.c
index 07073a5940b1..ea60752d3719 100644
--- a/board/ti/am65x/evm.c
+++ b/board/ti/am65x/evm.c
@@ -23,6 +23,7 @@
#include "../common/board_detect.h"
#include "../common/fdt_ops.h"
+#include "../common/k3-ddr-init.h"
#define board_is_am65x_base_board() board_ti_is("AM6-COMPROCEVM")
@@ -49,17 +50,6 @@ int board_init(void)
return 0;
}
-int dram_init(void)
-{
-#ifdef CONFIG_PHYS_64BIT
- gd->ram_size = 0x100000000;
-#else
- gd->ram_size = 0x80000000;
-#endif
-
- return 0;
-}
-
phys_addr_t board_get_usable_ram_top(phys_size_t total_size)
{
#ifdef CONFIG_PHYS_64BIT
@@ -71,23 +61,6 @@ phys_addr_t board_get_usable_ram_top(phys_size_t total_size)
return gd->ram_top;
}
-int dram_init_banksize(void)
-{
- /* Bank 0 declares the memory available in the DDR low region */
- gd->bd->bi_dram[0].start = 0x80000000;
- gd->bd->bi_dram[0].size = 0x80000000;
- gd->ram_size = 0x80000000;
-
-#ifdef CONFIG_PHYS_64BIT
- /* Bank 1 declares the memory available in the DDR high region */
- gd->bd->bi_dram[1].start = 0x880000000;
- gd->bd->bi_dram[1].size = 0x80000000;
- gd->ram_size = 0x100000000;
-#endif
-
- return 0;
-}
-
#ifdef CONFIG_SPL_LOAD_FIT
int board_fit_config_name_match(const char *name)
{
diff --git a/board/ti/common/Makefile b/board/ti/common/Makefile
index 5ac361ba7fcf..070dec3aebf5 100644
--- a/board/ti/common/Makefile
+++ b/board/ti/common/Makefile
@@ -4,3 +4,4 @@
obj-${CONFIG_TI_I2C_BOARD_DETECT} += board_detect.o
obj-${CONFIG_CMD_EXTENSION} += cape_detect.o
obj-${CONFIG_OF_LIBFDT} += fdt_ops.o
+obj-${CONFIG_ARCH_K3} += k3-ddr-init.o
diff --git a/board/ti/common/k3-ddr-init.c b/board/ti/common/k3-ddr-init.c
new file mode 100644
index 000000000000..228b95774b97
--- /dev/null
+++ b/board/ti/common/k3-ddr-init.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2023, Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <fdt_support.h>
+#include <dm/uclass.h>
+#include <k3-ddrss.h>
+#include <spl.h>
+
+#include "k3-ddr-init.h"
+
+int dram_init(void)
+{
+ s32 ret;
+
+ ret = fdtdec_setup_mem_size_base_lowest();
+ if (ret)
+ printf("Error setting up mem size and base. %d\n", ret);
+
+ return ret;
+}
+
+int dram_init_banksize(void)
+{
+ s32 ret;
+
+ ret = fdtdec_setup_memory_banksize();
+ if (ret)
+ printf("Error setting up memory banksize. %d\n", ret);
+
+ return ret;
+}
+
+#if defined(CONFIG_SPL_BUILD)
+
+void fixup_ddr_driver_for_ecc(struct spl_image_info *spl_image)
+{
+ struct udevice *dev;
+ int ret, ctr = 1;
+
+ dram_init_banksize();
+
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret)
+ panic("Cannnot get RAM device for ddr size fixup: %d\n", ret);
+
+ ret = k3_ddrss_ddr_fdt_fixup(dev, spl_image->fdt_addr, gd->bd);
+ if (ret)
+ printf("Error fixing up ddr node for ECC use! %d\n", ret);
+
+ dram_init_banksize();
+
+ ret = uclass_next_device_err(&dev);
+
+ while (!ret) {
+ ret = k3_ddrss_ddr_fdt_fixup(dev, spl_image->fdt_addr, gd->bd);
+ if (ret)
+ printf("Error fixing up ddr node %d for ECC use! %d\n", ctr, ret);
+
+ dram_init_banksize();
+ ret = uclass_next_device_err(&dev);
+ ctr++;
+ }
+}
+
+void fixup_memory_node(struct spl_image_info *spl_image)
+{
+ u64 start[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
+ int bank;
+ int ret;
+
+ dram_init();
+ dram_init_banksize();
+
+ for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+ start[bank] = gd->bd->bi_dram[bank].start;
+ size[bank] = gd->bd->bi_dram[bank].size;
+ }
+
+ ret = fdt_fixup_memory_banks(spl_image->fdt_addr, start, size,
+ CONFIG_NR_DRAM_BANKS);
+
+ if (ret)
+ printf("Error fixing up memory node! %d\n", ret);
+}
+
+#endif
diff --git a/board/ti/common/k3-ddr-init.h b/board/ti/common/k3-ddr-init.h
new file mode 100644
index 000000000000..9d1826815dfd
--- /dev/null
+++ b/board/ti/common/k3-ddr-init.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2023, Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#ifndef __K3_DDR_INIT_H
+#define __K3_DDR_INIT_H
+
+int dram_init(void);
+int dram_init_banksize(void);
+
+void fixup_ddr_driver_for_ecc(struct spl_image_info *spl_image);
+void fixup_memory_node(struct spl_image_info *spl_image);
+
+#endif /* __K3_DDR_INIT_H */
diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c
index 539eaf47186a..e0cd8529bc2b 100644
--- a/board/ti/j721e/evm.c
+++ b/board/ti/j721e/evm.c
@@ -17,6 +17,7 @@
#include "../common/board_detect.h"
#include "../common/fdt_ops.h"
+#include "../common/k3-ddr-init.h"
#define board_is_j721e_som() (board_ti_k3_is("J721EX-PM1-SOM") || \
board_ti_k3_is("J721EX-PM2-SOM"))
@@ -37,17 +38,6 @@ int board_init(void)
return 0;
}
-int dram_init(void)
-{
-#ifdef CONFIG_PHYS_64BIT
- gd->ram_size = 0x100000000;
-#else
- gd->ram_size = 0x80000000;
-#endif
-
- return 0;
-}
-
phys_addr_t board_get_usable_ram_top(phys_size_t total_size)
{
#ifdef CONFIG_PHYS_64BIT
@@ -59,23 +49,6 @@ phys_addr_t board_get_usable_ram_top(phys_size_t total_size)
return gd->ram_top;
}
-int dram_init_banksize(void)
-{
- /* Bank 0 declares the memory available in the DDR low region */
- gd->bd->bi_dram[0].start = 0x80000000;
- gd->bd->bi_dram[0].size = 0x80000000;
- gd->ram_size = 0x80000000;
-
-#ifdef CONFIG_PHYS_64BIT
- /* Bank 1 declares the memory available in the DDR high region */
- gd->bd->bi_dram[1].start = 0x880000000;
- gd->bd->bi_dram[1].size = 0x80000000;
- gd->ram_size = 0x100000000;
-#endif
-
- return 0;
-}
-
#ifdef CONFIG_SPL_LOAD_FIT
int board_fit_config_name_match(const char *name)
{
diff --git a/board/ti/j721s2/evm.c b/board/ti/j721s2/evm.c
index 5a0281d6b483..fca30107cddb 100644
--- a/board/ti/j721s2/evm.c
+++ b/board/ti/j721s2/evm.c
@@ -24,6 +24,7 @@
#include "../common/board_detect.h"
#include "../common/fdt_ops.h"
+#include "../common/k3-ddr-init.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -32,17 +33,6 @@ int board_init(void)
return 0;
}
-int dram_init(void)
-{
-#ifdef CONFIG_PHYS_64BIT
- gd->ram_size = 0x100000000;
-#else
- gd->ram_size = 0x80000000;
-#endif
-
- return 0;
-}
-
phys_addr_t board_get_usable_ram_top(phys_size_t total_size)
{
#ifdef CONFIG_PHYS_64BIT
@@ -54,22 +44,17 @@ phys_addr_t board_get_usable_ram_top(phys_size_t total_size)
return gd->ram_top;
}
-int dram_init_banksize(void)
+#if defined(CONFIG_SPL_BUILD)
+void spl_perform_fixups(struct spl_image_info *spl_image)
{
- /* Bank 0 declares the memory available in the DDR low region */
- gd->bd->bi_dram[0].start = 0x80000000;
- gd->bd->bi_dram[0].size = 0x7fffffff;
- gd->ram_size = 0x80000000;
-
-#ifdef CONFIG_PHYS_64BIT
- /* Bank 1 declares the memory available in the DDR high region */
- gd->bd->bi_dram[1].start = 0x880000000;
- gd->bd->bi_dram[1].size = 0x37fffffff;
- gd->ram_size = 0x400000000;
-#endif
-
- return 0;
+ if (IS_ENABLED(CONFIG_K3_DDRSS)) {
+ if (IS_ENABLED(CONFIG_K3_INLINE_ECC))
+ fixup_ddr_driver_for_ecc(spl_image);
+ } else {
+ fixup_memory_node(spl_image);
+ }
}
+#endif
#ifdef CONFIG_TI_I2C_BOARD_DETECT
/*
diff --git a/board/ti/j784s4/evm.c b/board/ti/j784s4/evm.c
index aed0ea5b9495..73056a16dd5f 100644
--- a/board/ti/j784s4/evm.c
+++ b/board/ti/j784s4/evm.c
@@ -10,6 +10,7 @@
#include <init.h>
#include <spl.h>
#include "../common/fdt_ops.h"
+#include "../common/k3-ddr-init.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -18,15 +19,17 @@ int board_init(void)
return 0;
}
-int dram_init(void)
+#if defined(CONFIG_SPL_BUILD)
+void spl_perform_fixups(struct spl_image_info *spl_image)
{
- return fdtdec_setup_mem_size_base();
-}
-
-int dram_init_banksize(void)
-{
- return fdtdec_setup_memory_banksize();
+ if (IS_ENABLED(CONFIG_K3_DDRSS)) {
+ if (IS_ENABLED(CONFIG_K3_INLINE_ECC))
+ fixup_ddr_driver_for_ecc(spl_image);
+ } else {
+ fixup_memory_node(spl_image);
+ }
}
+#endif
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
--
2.34.1
More information about the U-Boot
mailing list