[PATCH v2 2/3] rockchip: Use common bss and stack addresses on PX30

[Quentin Schulz]

From: Quentin Schulz <quentin.schulz at cherry.de>

See commit 008ba0d56d00 ("rockchip: Add common default bss and stack
addresses") for memory layout. This migrates PX30 to use the new layout,
except for TPL. Indeed, PX30 is extremely limited in SRAM, so we need to
be extra careful about what goes into the TPL and how much we can
allocate there, so let's keep the current value for
TPL_SYS_MALLOC_F_LEN (already present in the PX30-specific Kconfig, from
an earlier commit).

This will allow us to use the same memory layout on one more Rockchip
SoC, which is always a nice thing. Additionally, this will make it
easier to fix U-Boot proper pre-reloc running out of memory on PX30 in a
subsequent commit.

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Tested-by: Heiko Stuebner <heiko at sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz at cherry.de>
---
 arch/arm/mach-rockchip/px30/Kconfig | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
index e39472604c3..dcf9eb8144b 100644
--- a/arch/arm/mach-rockchip/px30/Kconfig
+++ b/arch/arm/mach-rockchip/px30/Kconfig
@@ -68,8 +68,11 @@ config ROCKCHIP_STIMER_BASE
 config SYS_SOC
 	default "px30"
 
+config ROCKCHIP_COMMON_STACK_ADDR
+	default y
+
 config SYS_MALLOC_F_LEN
-	default 0x400
+	default 0x400 if !SPL_SHARES_INIT_SP_ADDR
 
 config SPL_SERIAL
 	default y

-- 
2.45.1