[PATCH next v2 5/8] rockchip: px30: make UART pinmux accessible to TPL/SPL DTB
Quentin Schulz
foss+uboot at 0leil.net
Fri May 24 11:23:30 CEST 2024
From: Quentin Schulz <quentin.schulz at cherry.de>
This adds the default pinmux for UART2 and UART5 to the TPL/SPL DTB (if
not removed through the CONFIG_OF_SPL_REMOVE_PROPS symbol) as those two
controllers are always made available to all boards.
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz at cherry.de>
---
arch/arm/dts/px30-u-boot.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/dts/px30-u-boot.dtsi b/arch/arm/dts/px30-u-boot.dtsi
index 046da022ffe..59fa9f43a97 100644
--- a/arch/arm/dts/px30-u-boot.dtsi
+++ b/arch/arm/dts/px30-u-boot.dtsi
@@ -33,11 +33,27 @@
bootph-all;
};
+&uart2m0_xfer {
+ bootph-all;
+};
+
&uart5 {
clock-frequency = <24000000>;
bootph-all;
};
+&uart5_cts {
+ bootph-all;
+};
+
+&uart5_rts {
+ bootph-all;
+};
+
+&uart5_xfer {
+ bootph-all;
+};
+
&sdmmc {
bootph-all;
--
2.45.1
More information about the U-Boot
mailing list