[PATCH v4 2/5] lib/lz4: update LZ4 decompressor module
Jianan Huang
jnhuang95 at gmail.com
Sun May 26 14:18:50 CEST 2024
Hi Jonathan,
Could you please try the following patch ? It replaces all memcpy() calls
in lz4 with __builtin_memcpy().
diff --git a/lib/lz4.c b/lib/lz4.c
index d365dc727c..2afe31c1c3 100644
--- a/lib/lz4.c
+++ b/lib/lz4.c
@@ -34,6 +34,8 @@
#include <asm/unaligned.h>
#include <u-boot/lz4.h>
+#define LZ4_memcpy(dst, src, size) __builtin_memcpy(dst, src, size)
+
#define FORCE_INLINE inline __attribute__((always_inline))
static FORCE_INLINE u16 LZ4_readLE16(const void *src)
@@ -215,7 +217,7 @@ static FORCE_INLINE int LZ4_decompress_generic(
&& likely((endOnInput ? ip < shortiend : 1) &
(op <= shortoend))) {
/* Copy the literals */
- memcpy(op, ip, endOnInput ? 16 : 8);
+ LZ4_memcpy(op, ip, endOnInput ? 16 : 8);
op += length; ip += length;
/*
@@ -234,9 +236,9 @@ static FORCE_INLINE int LZ4_decompress_generic(
(offset >= 8) &&
(dict == withPrefix64k || match >= lowPrefix)) {
/* Copy the match. */
- memcpy(op + 0, match + 0, 8);
- memcpy(op + 8, match + 8, 8);
- memcpy(op + 16, match + 16, 2);
+ LZ4_memcpy(op + 0, match + 0, 8);
+ LZ4_memcpy(op + 8, match + 8, 8);
+ LZ4_memcpy(op + 16, match + 16, 2);
op += length + MINMATCH;
/* Both stages worked, load the next token. */
continue;
@@ -416,7 +418,7 @@ _copy_match:
size_t const copySize = (size_t)(lowPrefix - match);
size_t const restSize = length - copySize;
- memcpy(op, dictEnd - copySize, copySize);
+ LZ4_memcpy(op, dictEnd - copySize, copySize);
op += copySize;
if (restSize > (size_t)(op - lowPrefix)) {
/* overlap copy */
@@ -426,7 +428,7 @@ _copy_match:
while (op < endOfMatch)
*op++ = *copyFrom++;
} else {
- memcpy(op, lowPrefix, restSize);
+ LZ4_memcpy(op, lowPrefix, restSize);
op += restSize;
}
}
@@ -452,7 +454,7 @@ _copy_match:
while (op < copyEnd)
*op++ = *match++;
} else {
- memcpy(op, match, mlen);
+ LZ4_memcpy(op, match, mlen);
}
op = copyEnd;
if (op == oend)
@@ -466,7 +468,7 @@ _copy_match:
op[2] = match[2];
op[3] = match[3];
match += inc32table[offset];
- memcpy(op + 4, match, 4);
+ LZ4_memcpy(op + 4, match, 4);
match -= dec64table[offset];
} else {
LZ4_copy8(op, match);
diff --git a/lib/lz4_wrapper.c b/lib/lz4_wrapper.c
index 4d48e7b0e8..e09c8d7057 100644
--- a/lib/lz4_wrapper.c
+++ b/lib/lz4_wrapper.c
@@ -80,7 +80,7 @@ int ulz4fn(const void *src, size_t srcn, void *dst,
size_t *dstn)
if (block_header & LZ4F_BLOCKUNCOMPRESSED_FLAG) {
size_t size = min((ptrdiff_t)block_size, (ptrdiff_t)(end - out));
- memcpy(out, in, size);
+ LZ4_memcpy(out, in, size);
out += size;
if (size < block_size) {
ret = -ENOBUFS; /* output overrun */
Thanks,
Jianan
On 2024/5/26 16:06, Jonathan Liu wrote:
Hi Gao,
On Sat, 25 May 2024 at 02:52, Gao Xiang <hsiangkao at linux.alibaba.com>
<hsiangkao at linux.alibaba.com> wrote:
Hi,
On 2024/5/24 22:26, Jonathan Liu wrote:
Hi Jianan,
On Sat, 26 Feb 2022 at 18:05, Huang Jianan <jnhuang95 at gmail.com>
<jnhuang95 at gmail.com> wrote:
Update the LZ4 compression module based on LZ4 v1.8.3 in order to
use the newest LZ4_decompress_safe_partial() which can now decode
exactly the nb of bytes requested.
Signed-off-by: Huang Jianan <jnhuang95 at gmail.com> <jnhuang95 at gmail.com>
I noticed after this commit LZ4 decompression is slower.
ulz4fn function call takes 1.209670 seconds with this commit.
After reverting this commit, the ulz4fn function call takes 0.587032 seconds.
I am decompressing a LZ4 compressed kernel (compressed with lz4 v1.9.4
using -9 option for maximum compression) on RK3399.
Any ideas why it is slower with this commit and how the performance
regression can be fixed?
Just the quick glance, I think the issue may be due to memcpy/memmove
since it seems the main difference between these two codebases
(I'm not sure which LZ4 version the old codebase was based on) and
the new version mainly relies on memcpy/memmove instead of its own
versions.
Would you mind to check the assembly how memcpy/memset is generated
on your platform?
Here is the assembly (-mcpu=cortex-a72.cortex-a53 -march=armv8-a+crc+crypto):
000000000028220c <memset>:
#if !CONFIG_IS_ENABLED(TINY_MEMSET)
unsigned long cl = 0;
int i;
/* do it one word at a time (32 bits or 64 bits) while possible */
if ( ((ulong)s & (sizeof(*sl) - 1)) == 0) {
28220c: f2400803 ands x3, x0, #0x7
282210: 540002c1 b.ne 282268 <memset+0x5c> // b.any
for (i = 0; i < sizeof(*sl); i++) {
cl <<= 8;
cl |= c & 0xff;
282214: 92401c26 and x6, x1, #0xff
unsigned long cl = 0;
282218: d2800004 mov x4, #0x0 // #0
28221c: 52800105 mov w5, #0x8 // #8
cl |= c & 0xff;
282220: aa0420c4 orr x4, x6, x4, lsl #8
for (i = 0; i < sizeof(*sl); i++) {
282224: 710004a5 subs w5, w5, #0x1
282228: 54ffffc1 b.ne 282220 <memset+0x14> // b.any
}
while (count >= sizeof(*sl)) {
28222c: cb030045 sub x5, x2, x3
282230: f1001cbf cmp x5, #0x7
282234: 54000148 b.hi 28225c <memset+0x50> // b.pmore
282238: d343fc43 lsr x3, x2, #3
28223c: 928000e4 mov x4, #0xfffffffffffffff8 // #-8
282240: 9b047c63 mul x3, x3, x4
282244: 8b030042 add x2, x2, x3
282248: cb030003 sub x3, x0, x3
unsigned long *sl = (unsigned long *) s;
28224c: d2800004 mov x4, #0x0 // #0
count -= sizeof(*sl);
}
}
#endif /* fill 8 bits at a time */
s8 = (char *)sl;
while (count--)
282250: eb04005f cmp x2, x4
282254: 540000e1 b.ne 282270 <memset+0x64> // b.any
*s8++ = c;
return s;
}
282258: d65f03c0 ret
*sl++ = cl;
28225c: f8236804 str x4, [x0, x3]
count -= sizeof(*sl);
282260: 91002063 add x3, x3, #0x8
282264: 17fffff2 b 28222c <memset+0x20>
unsigned long *sl = (unsigned long *) s;
282268: aa0003e3 mov x3, x0
28226c: 17fffff8 b 28224c <memset+0x40>
*s8++ = c;
282270: 38246861 strb w1, [x3, x4]
282274: 91000484 add x4, x4, #0x1
282278: 17fffff6 b 282250 <memset+0x44>
000000000028227c <memcpy>:
__used void * memcpy(void *dest, const void *src, size_t count)
{
unsigned long *dl = (unsigned long *)dest, *sl = (unsigned long *)src;
char *d8, *s8;
if (src == dest)
28227c: eb01001f cmp x0, x1
282280: 54000100 b.eq 2822a0 <memcpy+0x24> // b.none
return dest;
/* while all data is aligned (common case), copy a word at a time */
if ( (((ulong)dest | (ulong)src) & (sizeof(*dl) - 1)) == 0) {
282284: aa010003 orr x3, x0, x1
282288: f2400863 ands x3, x3, #0x7
28228c: 54000120 b.eq 2822b0 <memcpy+0x34> // b.none
282290: aa0003e4 mov x4, x0
282294: d2800003 mov x3, #0x0 // #0
}
}
/* copy the reset one byte at a time */
d8 = (char *)dl;
s8 = (char *)sl;
while (count--)
282298: eb03005f cmp x2, x3
28229c: 540001e1 b.ne 2822d8 <memcpy+0x5c> // b.any
*d8++ = *s8++;
return dest;
}
2822a0: d65f03c0 ret
*dl++ = *sl++;
2822a4: f8636824 ldr x4, [x1, x3]
2822a8: f8236804 str x4, [x0, x3]
count -= sizeof(*dl);
2822ac: 91002063 add x3, x3, #0x8
while (count >= sizeof(*dl)) {
2822b0: cb030044 sub x4, x2, x3
2822b4: f1001c9f cmp x4, #0x7
2822b8: 54ffff68 b.hi 2822a4 <memcpy+0x28> // b.pmore
2822bc: d343fc43 lsr x3, x2, #3
2822c0: 928000e4 mov x4, #0xfffffffffffffff8 // #-8
2822c4: 9b047c63 mul x3, x3, x4
2822c8: 8b030042 add x2, x2, x3
2822cc: cb030004 sub x4, x0, x3
2822d0: cb030021 sub x1, x1, x3
2822d4: 17fffff0 b 282294 <memcpy+0x18>
*d8++ = *s8++;
2822d8: 38636825 ldrb w5, [x1, x3]
2822dc: 38236885 strb w5, [x4, x3]
2822e0: 91000463 add x3, x3, #0x1
2822e4: 17ffffed b 282298 <memcpy+0x1c>
I tried enabling CONFIG_USE_ARCH_MEMCPY=y, CONFIG_USE_ARCH_MEMSET=y in
the .config (but leaving it disabled in SPL/TPL) and it results in
Synchronous Abort:
U-Boot SPL 2024.04 (Apr 02 2024 - 10:58:58 +0000)
Trying to boot from MMC1
NOTICE: BL31: v1.3(release):8f40012ab
NOTICE: BL31: Built : 14:20:53, Feb 16 2023
NOTICE: BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1203): pd status 3e
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without
OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
"Synchronous Abort" handler, esr 0x96000021, far 0x2957e1
elr: 000000000020233c lr : 000000000026a388
x0 : 00000000002fbf38 x1 : 00000000002957e1
x2 : 0000000000000008 x3 : 0000000000000065
x4 : 00000000002957e9 x5 : 00000000002fbf40
x6 : 0000000000000065 x7 : 0000000000000003
x8 : 00000000002c7960 x9 : 000000000000ffd0
x10: 00000000002fbc5c x11: 00000000000132e8
x12: 00000000002fbce8 x13: 00000000002c7960
x14: 00000000002c7960 x15: 0000000000000000
x16: 0000000000000000 x17: 0000000000000000
x18: 00000000002fbe30 x19: 0000000000000007
x20: 00000000002957d8 x21: 0000000000000009
x22: 000000000029d189 x23: 0000000000000020
x24: 00000000002fbf38 x25: 00000000002957e7
x26: 00000000002957b2 x27: 0000000000007fff
x28: 0000000000000000 x29: 00000000002fbcc0
Code: a9001c06 a93f34ac d65f03c0 361800c2 (f9400026)
Resetting CPU ...
resetting ...
Thanks,
Gao Xiang
Regards,
Jonathan
More information about the U-Boot
mailing list