[PATCH 4/5] pinctrl: qcom: sm8550: add special pins pins configuration data
Neil Armstrong
neil.armstrong at linaro.org
Tue May 28 10:31:56 CEST 2024
Add the special pins configuration data to allow setup the bias
of the UFS and SDCard pins on the SM8550 SoC.
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
drivers/pinctrl/qcom/pinctrl-sm8550.c | 42 ++++++++++++++++++++++++++++-------
1 file changed, 34 insertions(+), 8 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8550.c b/drivers/pinctrl/qcom/pinctrl-sm8550.c
index 7265cb73404..c65dfe0435e 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8550.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8550.c
@@ -18,6 +18,37 @@ static const struct pinctrl_function msm_pinctrl_functions[] = {
{"gpio", 0},
};
+#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv) \
+ { \
+ .name = pg_name, \
+ .ctl_reg = ctl, \
+ .io_reg = 0, \
+ .pull_bit = pull, \
+ .drv_bit = drv, \
+ .oe_bit = -1, \
+ .in_bit = -1, \
+ .out_bit = -1, \
+ }
+
+#define UFS_RESET(pg_name, ctl, io) \
+ { \
+ .name = pg_name, \
+ .ctl_reg = ctl, \
+ .io_reg = io, \
+ .pull_bit = 3, \
+ .drv_bit = 0, \
+ .oe_bit = -1, \
+ .in_bit = -1, \
+ .out_bit = 0, \
+ }
+
+static const struct msm_special_pin_data msm_special_pins_data[] = {
+ [0] = UFS_RESET("ufs_reset", 0xde000, 0xde004),
+ [1] = SDC_QDSD_PINGROUP("sdc2_clk", 0xd6000, 14, 6),
+ [2] = SDC_QDSD_PINGROUP("sdc2_cmd", 0xd6000, 11, 3),
+ [3] = SDC_QDSD_PINGROUP("sdc2_data", 0xd6000, 9, 0),
+};
+
static const char *sm8550_get_function_name(struct udevice *dev,
unsigned int selector)
{
@@ -27,15 +58,9 @@ static const char *sm8550_get_function_name(struct udevice *dev,
static const char *sm8550_get_pin_name(struct udevice *dev,
unsigned int selector)
{
- static const char *special_pins_names[] = {
- "ufs_reset",
- "sdc2_clk",
- "sdc2_cmd",
- "sdc2_data",
- };
-
if (selector >= 210 && selector <= 213)
- snprintf(pin_name, MAX_PIN_NAME_LEN, special_pins_names[selector - 210]);
+ snprintf(pin_name, MAX_PIN_NAME_LEN,
+ msm_special_pins_data[selector - 210].name);
else
snprintf(pin_name, MAX_PIN_NAME_LEN, "gpio%u", selector);
@@ -52,6 +77,7 @@ static struct msm_pinctrl_data sm8550_data = {
.pin_data = {
.pin_count = 214,
.special_pins_start = 210,
+ .special_pins_data = msm_special_pins_data,
},
.functions_count = ARRAY_SIZE(msm_pinctrl_functions),
.get_function_name = sm8550_get_function_name,
--
2.34.1
More information about the U-Boot
mailing list