[PATCH 2/2] arm: imx8mp-phycore: move to OF_UPSTREAM
Yannic Moog
y.moog at phytec.de
Tue May 28 13:25:00 CEST 2024
The PHYCORE_IMX8MP is used by the phyBOARD-Pollux. Migrate board to
OF_UPSTREAM. Linux kernel device tree for the board can be used as is,
corresponding U-Boot device tree files are removed. U-Boot tweaks are
kept unchanged.
Signed-off-by: Yannic Moog <y.moog at phytec.de>
---
arch/arm/dts/Makefile | 1 -
arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts | 361 ----------------------------
arch/arm/dts/imx8mp-phycore-som.dtsi | 323 -------------------------
arch/arm/mach-imx/imx8m/Kconfig | 1 +
board/phytec/phycore_imx8mp/MAINTAINERS | 1 -
configs/phycore-imx8mp_defconfig | 2 +-
6 files changed, 2 insertions(+), 687 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 480f8ff569d..d09d0d84bec 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1033,7 +1033,6 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
imx8mp-dhcom-pdk3-overlay-rev100.dtbo \
imx8mp-icore-mx8mp-edimm2.2.dtb \
imx8mp-msc-sm2s.dtb \
- imx8mp-phyboard-pollux-rdk.dtb \
imx8mq-pico-pi.dtb \
imx8mq-kontron-pitx-imx8m.dtb \
imx8mq-librem5-r4.dtb
diff --git a/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts b/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts
deleted file mode 100644
index c8640cac3ed..00000000000
--- a/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts
+++ /dev/null
@@ -1,361 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2020 PHYTEC Messtechnik GmbH
- * Author: Teresa Remmet <t.remmet at phytec.de>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/leds/leds-pca9532.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "imx8mp-phycore-som.dtsi"
-
-/ {
- model = "PHYTEC phyBOARD-Pollux i.MX8MP";
- compatible = "phytec,imx8mp-phyboard-pollux-rdk",
- "phytec,imx8mp-phycore-som", "fsl,imx8mp";
-
- chosen {
- stdout-path = &uart1;
- };
-
- reg_can1_stby: regulator-can1-stby {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1_reg>;
- gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
- regulator-max-microvolt = <3300000>;
- regulator-min-microvolt = <3300000>;
- regulator-name = "can1-stby";
- };
-
- reg_can2_stby: regulator-can2-stby {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan2_reg>;
- gpio = <&gpio3 21 GPIO_ACTIVE_LOW>;
- regulator-max-microvolt = <3300000>;
- regulator-min-microvolt = <3300000>;
- regulator-name = "can2-stby";
- };
-
- reg_usb1_vbus: regulator-usb1-vbus {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb1_vbus>;
- gpio = <&gpio1 12 GPIO_ACTIVE_LOW>;
- regulator-max-microvolt = <5000000>;
- regulator-min-microvolt = <5000000>;
- regulator-name = "usb1_host_vbus";
- };
-
- reg_usdhc2_vmmc: regulator-usdhc2 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
- regulator-name = "VSD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- startup-delay-us = <100>;
- off-on-delay-us = <12000>;
- };
-};
-
-&eqos {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eqos>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy0>;
- status = "okay";
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy at 1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0x1>;
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
- ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
- enet-phy-lane-no-swap;
- };
- };
-};
-
-/* CAN FD */
-&flexcan1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1>;
- xceiver-supply = <®_can1_stby>;
- status = "okay";
-};
-
-&flexcan2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan2>;
- xceiver-supply = <®_can2_stby>;
- status = "okay";
-};
-
-&i2c2 {
- clock-frequency = <400000>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c2>;
- pinctrl-1 = <&pinctrl_i2c2_gpio>;
- sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- status = "okay";
-
- eeprom at 51 {
- compatible = "atmel,24c02";
- reg = <0x51>;
- pagesize = <16>;
- };
-
- leds at 62 {
- compatible = "nxp,pca9533";
- reg = <0x62>;
-
- led-1 {
- type = <PCA9532_TYPE_LED>;
- };
-
- led-2 {
- type = <PCA9532_TYPE_LED>;
- };
-
- led-3 {
- type = <PCA9532_TYPE_LED>;
- };
- };
-};
-
-&snvs_pwrkey {
- status = "okay";
-};
-
-/* debug console */
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-/* USB1 Host mode Type-A */
-&usb3_phy0 {
- vbus-supply = <®_usb1_vbus>;
- status = "okay";
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-&usb_dwc3_0 {
- dr_mode = "host";
- status = "okay";
-};
-
-/* USB2 4-port USB3.0 HUB */
-&usb3_phy1 {
- status = "okay";
-};
-
-&usb3_1 {
- fsl,permanently-attached;
- fsl,disable-port-power-control;
- status = "okay";
-};
-
-&usb_dwc3_1 {
- dr_mode = "host";
- status = "okay";
-};
-
-/* RS232/RS485 */
-&uart2 {
- assigned-clocks = <&clk IMX8MP_CLK_UART2>;
- assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- uart-has-rtscts;
- status = "okay";
-};
-
-/* SD-Card */
-&usdhc2 {
- assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
- assigned-clock-rates = <200000000>;
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>;
- pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>;
- pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>;
- cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
- vmmc-supply = <®_usdhc2_vmmc>;
- bus-width = <4>;
- status = "okay";
-};
-
-&gpio1 {
- gpio-line-names = "", "", "X_PMIC_WDOG_B", "",
- "PMIC_SD_VSEL", "", "", "", "", "",
- "", "", "USB1_OTG_PWR", "", "", "X_nETHPHY_INT";
-};
-
-&gpio2 {
- gpio-line-names = "", "", "", "",
- "", "", "", "", "", "",
- "", "", "X_SD2_CD_B", "", "", "",
- "", "", "", "SD2_RESET_B";
-};
-
-&gpio3 {
- gpio-line-names = "", "", "", "",
- "", "", "", "", "", "",
- "", "", "", "", "", "",
- "", "", "", "", "nCAN1_EN", "nCAN2_EN";
-};
-
-&gpio4 {
- gpio-line-names = "", "", "", "",
- "", "", "", "", "", "",
- "", "", "", "", "", "",
- "", "", "X_PMIC_IRQ_B", "", "nENET0_INT_PWDN";
-};
-
-&iomuxc {
- pinctrl_eqos: eqosgrp {
- fsl,pins = <
- MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
- MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
- MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
- MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
- MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
- MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
- MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
- MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
- MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
- MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
- MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
- MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
- MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
- MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
- MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10
- >;
- };
-
- pinctrl_flexcan1: flexcan1grp {
- fsl,pins = <
- MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x154
- MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x154
- >;
- };
-
- pinctrl_flexcan2: flexcan2grp {
- fsl,pins = <
- MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154
- MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154
- >;
- };
-
- pinctrl_flexcan1_reg: flexcan1reggrp {
- fsl,pins = <
- MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x154
- >;
- };
-
- pinctrl_flexcan2_reg: flexcan2reggrp {
- fsl,pins = <
- MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x154
- >;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
- MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
- >;
- };
-
- pinctrl_i2c2_gpio: i2c2gpiogrp {
- fsl,pins = <
- MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e2
- MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e2
- >;
- };
-
- pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
- fsl,pins = <
- MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x40
- MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x40
- >;
- };
-
- pinctrl_usb1_vbus: usb1vbusgrp {
- fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x10
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140
- MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140
- MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS 0x140
- MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS 0x140
- >;
- };
-
- pinctrl_usdhc2_pins: usdhc2-gpiogrp {
- fsl,pins = <
- MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
- MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
- MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
- MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
- MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
- MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
- >;
- };
-
- pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
- fsl,pins = <
- MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
- MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
- MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
- MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
- MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
- MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
- >;
- };
-
- pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
- fsl,pins = <
- MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
- MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
- MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
- MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
- MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
- MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
- >;
- };
-};
diff --git a/arch/arm/dts/imx8mp-phycore-som.dtsi b/arch/arm/dts/imx8mp-phycore-som.dtsi
deleted file mode 100644
index 79b290a002c..00000000000
--- a/arch/arm/dts/imx8mp-phycore-som.dtsi
+++ /dev/null
@@ -1,323 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2020 PHYTEC Messtechnik GmbH
- * Author: Teresa Remmet <t.remmet at phytec.de>
- */
-
-#include <dt-bindings/net/ti-dp83867.h>
-#include "imx8mp.dtsi"
-
-/ {
- model = "PHYTEC phyCORE-i.MX8MP";
- compatible = "phytec,imx8mp-phycore-som", "fsl,imx8mp";
-
- aliases {
- rtc0 = &rv3028;
- rtc1 = &snvs_rtc;
- };
-
- memory at 40000000 {
- device_type = "memory";
- reg = <0x0 0x40000000 0 0x80000000>;
- };
-};
-
-&A53_0 {
- cpu-supply = <&buck2>;
-};
-
-&A53_1 {
- cpu-supply = <&buck2>;
-};
-
-&A53_2 {
- cpu-supply = <&buck2>;
-};
-
-&A53_3 {
- cpu-supply = <&buck2>;
-};
-
-/* ethernet 1 */
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy1>;
- fsl,magic-packet;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy1: ethernet-phy at 0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- interrupt-parent = <&gpio1>;
- interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
- ti,min-output-impedance;
- enet-phy-lane-no-swap;
- };
- };
-};
-
-&flexspi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexspi0>;
- status = "okay";
-
- som_flash: flash at 0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <80000000>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <4>;
- };
-};
-
-&i2c1 {
- clock-frequency = <400000>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c1>;
- pinctrl-1 = <&pinctrl_i2c1_gpio>;
- sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- status = "okay";
-
- pmic: pmic at 25 {
- reg = <0x25>;
- compatible = "nxp,pca9450c";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pmic>;
- interrupt-parent = <&gpio4>;
- interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
-
- regulators {
- buck1: BUCK1 {
- regulator-compatible = "BUCK1";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <2187500>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <3125>;
- };
-
- buck2: BUCK2 {
- regulator-compatible = "BUCK2";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <2187500>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <3125>;
- nxp,dvs-run-voltage = <950000>;
- nxp,dvs-standby-voltage = <850000>;
- };
-
- buck4: BUCK4 {
- regulator-compatible = "BUCK4";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck5: BUCK5 {
- regulator-compatible = "BUCK5";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck6: BUCK6 {
- regulator-compatible = "BUCK6";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1: LDO1 {
- regulator-compatible = "LDO1";
- regulator-min-microvolt = <1600000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2: LDO2 {
- regulator-compatible = "LDO2";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1150000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo3: LDO3 {
- regulator-compatible = "LDO3";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4: LDO4 {
- regulator-compatible = "LDO4";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo5: LDO5 {
- regulator-compatible = "LDO5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-
- eeprom at 51 {
- compatible = "atmel,24c32";
- reg = <0x51>;
- pagesize = <32>;
- };
-
- rv3028: rtc at 52 {
- compatible = "microcrystal,rv3028";
- reg = <0x52>;
- trickle-resistor-ohms = <3000>;
- };
-};
-
-/* eMMC */
-&usdhc3 {
- assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
- assigned-clock-rates = <400000000>;
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc3>;
- pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&wdog1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
- fsl,ext-reset-output;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl_fec: fecgrp {
- fsl,pins = <
- MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
- MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
- MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
- MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
- MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
- MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
- MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
- MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
- MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x12
- MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x12
- MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x14
- MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x14
- MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x14
- MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x14
- MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x11
- >;
- };
-
- pinctrl_flexspi0: flexspi0grp {
- fsl,pins = <
- MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2
- MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82
- MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82
- MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82
- MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82
- MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
- MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
- >;
- };
-
- pinctrl_i2c1_gpio: i2c1gpiogrp {
- fsl,pins = <
- MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x1e3
- MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x1e3
- >;
- };
-
- pinctrl_pmic: pmicirqgrp {
- fsl,pins = <
- MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x141
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
- MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
- MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
- MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
- MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
- MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
- MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
- MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
- MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
- MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
- MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
- >;
- };
-
- pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
- fsl,pins = <
- MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
- MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
- MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
- MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
- MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
- MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
- MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
- MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
- MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
- MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
- MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
- >;
- };
-
- pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
- fsl,pins = <
- MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
- MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
- MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d2
- MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d2
- MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d2
- MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d2
- MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d2
- MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d2
- MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d2
- MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d2
- MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
- >;
- };
-
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xe6
- >;
- };
-};
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index f81be42d5b0..046c78547b2 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -303,6 +303,7 @@ config TARGET_PHYCORE_IMX8MP
select IMX8MP
select SUPPORT_SPL
select IMX8M_LPDDR4
+ imply OF_UPSTREAM
config TARGET_IMX8MM_CL_IOT_GATE
bool "CompuLab iot-gate-imx8"
diff --git a/board/phytec/phycore_imx8mp/MAINTAINERS b/board/phytec/phycore_imx8mp/MAINTAINERS
index d3beb978d3a..645476ae30a 100644
--- a/board/phytec/phycore_imx8mp/MAINTAINERS
+++ b/board/phytec/phycore_imx8mp/MAINTAINERS
@@ -2,7 +2,6 @@ phyCORE-i.MX8M Plus
M: Teresa Remmet <t.remmet at phytec.de>
W: https://www.phytec.eu/product-eu/system-on-modules/phycore-imx-8m-plus/
S: Maintained
-F: arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts
F: arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
F: board/phytec/phycore_imx8mp/
F: configs/phycore-imx8mp_defconfig
diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index e9a287cb441..6a59a27e3d4 100644
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -9,7 +9,7 @@ CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x3C0000
CONFIG_SYS_I2C_MXC_I2C1=y
CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8mp-phyboard-pollux-rdk"
+CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-phyboard-pollux-rdk"
CONFIG_SPL_TEXT_BASE=0x920000
CONFIG_TARGET_PHYCORE_IMX8MP=y
CONFIG_PHYTEC_SOM_DETECTION=y
--
2.34.1
More information about the U-Boot
mailing list