[PATCH v4 09/10] rockchip: rk3588: Remove USB3 DRD nodes in u-boot.dtsi
Jianfeng Liu
liujianfeng1994 at gmail.com
Tue May 28 19:04:05 CEST 2024
After we sync USB3 DRD nodes from v6.10-rc1, these obsolete nodes
can be removed.
Signed-off-by: Jianfeng Liu <liujianfeng1994 at gmail.com>
---
(no changes since v1)
arch/arm/dts/rk3588-u-boot.dtsi | 74 ---------------------------
arch/arm/dts/rk3588s-u-boot.dtsi | 85 --------------------------------
2 files changed, 159 deletions(-)
diff --git a/arch/arm/dts/rk3588-u-boot.dtsi b/arch/arm/dts/rk3588-u-boot.dtsi
index 4623580c610..bfe6645c30e 100644
--- a/arch/arm/dts/rk3588-u-boot.dtsi
+++ b/arch/arm/dts/rk3588-u-boot.dtsi
@@ -4,77 +4,3 @@
*/
#include "rk3588s-u-boot.dtsi"
-
-/ {
- usb_host1_xhci: usb at fc400000 {
- compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
- reg = <0x0 0xfc400000 0x0 0x400000>;
- interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>,
- <&cru ACLK_USB3OTG1>;
- clock-names = "ref_clk", "suspend_clk", "bus_clk";
- dr_mode = "otg";
- phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>;
- phy-names = "usb2-phy", "usb3-phy";
- phy_type = "utmi_wide";
- power-domains = <&power RK3588_PD_USB>;
- resets = <&cru SRST_A_USB3OTG1>;
- snps,dis_enblslpm_quirk;
- snps,dis-u2-freeclk-exists-quirk;
- snps,dis-del-phy-power-chg-quirk;
- snps,dis-tx-ipgap-linecheck-quirk;
- status = "disabled";
- };
-
- usbdpphy1_grf: syscon at fd5cc000 {
- compatible = "rockchip,rk3588-usbdpphy-grf", "syscon";
- reg = <0x0 0xfd5cc000 0x0 0x4000>;
- };
-
- usb2phy1_grf: syscon at fd5d4000 {
- compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
- reg = <0x0 0xfd5d4000 0x0 0x4000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- u2phy1: usb2phy at 4000 {
- compatible = "rockchip,rk3588-usb2phy";
- reg = <0x4000 0x10>;
- #clock-cells = <0>;
- clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
- clock-names = "phyclk";
- clock-output-names = "usb480m_phy1";
- interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>;
- resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>;
- reset-names = "phy", "apb";
- status = "disabled";
-
- u2phy1_otg: otg-port {
- #phy-cells = <0>;
- status = "disabled";
- };
- };
- };
-
- usbdp_phy1: phy at fed90000 {
- compatible = "rockchip,rk3588-usbdp-phy";
- reg = <0x0 0xfed90000 0x0 0x10000>;
- #phy-cells = <1>;
- clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
- <&cru CLK_USBDP_PHY1_IMMORTAL>,
- <&cru PCLK_USBDPPHY1>,
- <&u2phy1>;
- clock-names = "refclk", "immortal", "pclk", "utmi";
- resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>,
- <&cru SRST_USBDP_COMBO_PHY1_CMN>,
- <&cru SRST_USBDP_COMBO_PHY1_LANE>,
- <&cru SRST_USBDP_COMBO_PHY1_PCS>,
- <&cru SRST_P_USBDPPHY1>;
- reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
- rockchip,u2phy-grf = <&usb2phy1_grf>;
- rockchip,usb-grf = <&usb_grf>;
- rockchip,usbdpphy-grf = <&usbdpphy1_grf>;
- rockchip,vo-grf = <&vo0_grf>;
- status = "disabled";
- };
-};
diff --git a/arch/arm/dts/rk3588s-u-boot.dtsi b/arch/arm/dts/rk3588s-u-boot.dtsi
index e9d38d5c83b..09d8b311cec 100644
--- a/arch/arm/dts/rk3588s-u-boot.dtsi
+++ b/arch/arm/dts/rk3588s-u-boot.dtsi
@@ -19,95 +19,10 @@
bootph-all;
};
- usb_host0_xhci: usb at fc000000 {
- compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
- reg = <0x0 0xfc000000 0x0 0x400000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru REF_CLK_USB3OTG0>, <&cru SUSPEND_CLK_USB3OTG0>,
- <&cru ACLK_USB3OTG0>;
- clock-names = "ref_clk", "suspend_clk", "bus_clk";
- dr_mode = "otg";
- phys = <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3>;
- phy-names = "usb2-phy", "usb3-phy";
- phy_type = "utmi_wide";
- power-domains = <&power RK3588_PD_USB>;
- resets = <&cru SRST_A_USB3OTG0>;
- snps,dis_enblslpm_quirk;
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
- snps,dis-u2-freeclk-exists-quirk;
- snps,dis-del-phy-power-chg-quirk;
- snps,dis-tx-ipgap-linecheck-quirk;
- status = "disabled";
- };
-
- vo0_grf: syscon at fd5a6000 {
- compatible = "rockchip,rk3588-vo-grf", "syscon";
- reg = <0x0 0xfd5a6000 0x0 0x2000>;
- clocks = <&cru PCLK_VO0GRF>;
- };
-
- usb_grf: syscon at fd5ac000 {
- compatible = "rockchip,rk3588-usb-grf", "syscon";
- reg = <0x0 0xfd5ac000 0x0 0x4000>;
- };
-
- usbdpphy0_grf: syscon at fd5c8000 {
- compatible = "rockchip,rk3588-usbdpphy-grf", "syscon";
- reg = <0x0 0xfd5c8000 0x0 0x4000>;
- };
-
- usb2phy0_grf: syscon at fd5d0000 {
- compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
- reg = <0x0 0xfd5d0000 0x0 0x4000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- u2phy0: usb2phy at 0 {
- compatible = "rockchip,rk3588-usb2phy";
- reg = <0x0 0x10>;
- #clock-cells = <0>;
- clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
- clock-names = "phyclk";
- clock-output-names = "usb480m_phy0";
- interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>;
- resets = <&cru SRST_OTGPHY_U3_0>, <&cru SRST_P_USB2PHY_U3_0_GRF0>;
- reset-names = "phy", "apb";
- status = "disabled";
-
- u2phy0_otg: otg-port {
- #phy-cells = <0>;
- status = "disabled";
- };
- };
- };
-
rng: rng at fe378000 {
compatible = "rockchip,trngv1";
reg = <0x0 0xfe378000 0x0 0x200>;
};
-
- usbdp_phy0: phy at fed80000 {
- compatible = "rockchip,rk3588-usbdp-phy";
- reg = <0x0 0xfed80000 0x0 0x10000>;
- #phy-cells = <1>;
- clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
- <&cru CLK_USBDP_PHY0_IMMORTAL>,
- <&cru PCLK_USBDPPHY0>,
- <&u2phy0>;
- clock-names = "refclk", "immortal", "pclk", "utmi";
- resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>,
- <&cru SRST_USBDP_COMBO_PHY0_CMN>,
- <&cru SRST_USBDP_COMBO_PHY0_LANE>,
- <&cru SRST_USBDP_COMBO_PHY0_PCS>,
- <&cru SRST_P_USBDPPHY0>;
- reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
- rockchip,u2phy-grf = <&usb2phy0_grf>;
- rockchip,usb-grf = <&usb_grf>;
- rockchip,usbdpphy-grf = <&usbdpphy0_grf>;
- rockchip,vo-grf = <&vo0_grf>;
- status = "disabled";
- };
};
#ifdef CONFIG_ROCKCHIP_SPI_IMAGE
--
2.34.1
More information about the U-Boot
mailing list