[PATCH 04/14] clk: ti: clk-k3: use IS_ENABLED macro and fix the clock-data order

Jayesh Choudhary j-choudhary at ti.com
Wed May 29 15:24:38 CEST 2024


Use IS_ENABLED macro for the platform clock-data list and add them
in alphabetical order.

Reviewed-by: Bryan Brattlof <bb at ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary at ti.com>
---
 drivers/clk/ti/clk-k3.c | 41 +++++++++++++++++++++--------------------
 1 file changed, 21 insertions(+), 20 deletions(-)

diff --git a/drivers/clk/ti/clk-k3.c b/drivers/clk/ti/clk-k3.c
index 41e5022ea0..9e17755c24 100644
--- a/drivers/clk/ti/clk-k3.c
+++ b/drivers/clk/ti/clk-k3.c
@@ -59,6 +59,24 @@ static void clk_add_map(struct ti_clk_data *data, struct clk *clk,
 }
 
 static const struct soc_attr ti_k3_soc_clk_data[] = {
+#if IS_ENABLED(CONFIG_SOC_K3_AM625)
+	{
+		.family = "AM62X",
+		.data = &am62x_clk_platdata,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SOC_K3_AM62A7)
+	{
+		.family = "AM62AX",
+		.data = &am62ax_clk_platdata,
+	},
+#endif
+#if IS_ENABLED(CONFIG_SOC_K3_AM62P5)
+	{
+		.family = "AM62PX",
+		.data = &am62px_clk_platdata,
+	},
+#endif
 #if IS_ENABLED(CONFIG_SOC_K3_J721E)
 	{
 		.family = "J721E",
@@ -68,35 +86,18 @@ static const struct soc_attr ti_k3_soc_clk_data[] = {
 		.family = "J7200",
 		.data = &j7200_clk_platdata,
 	},
-#elif CONFIG_SOC_K3_J721S2
+#endif
+#if IS_ENABLED(CONFIG_SOC_K3_J721S2)
 	{
 		.family = "J721S2",
 		.data = &j721s2_clk_platdata,
 	},
 #endif
-#ifdef CONFIG_SOC_K3_AM625
-	{
-		.family = "AM62X",
-		.data = &am62x_clk_platdata,
-	},
-#endif
-#ifdef CONFIG_SOC_K3_AM62A7
-	{
-		.family = "AM62AX",
-		.data = &am62ax_clk_platdata,
-	},
-#endif
-#ifdef CONFIG_SOC_K3_J784S4
+#if IS_ENABLED(CONFIG_SOC_K3_J784S4)
 	{
 		.family = "J784S4",
 		.data = &j784s4_clk_platdata,
 	},
-#endif
-#ifdef CONFIG_SOC_K3_AM62P5
-	{
-		.family = "AM62PX",
-		.data = &am62px_clk_platdata,
-	},
 #endif
 	{ /* sentinel */ }
 };
-- 
2.25.1



More information about the U-Boot mailing list