[PATCH v2 0/2] Add eFuse access for ZynqMP

[Michal Simek]

On 5/15/24 14:41, lukas.funke-oss at weidmueller.com wrote:
> From: Lukas Funke <lukas.funke at weidmueller.com>
> 
> 
> This series adds a driver to read and write ZynqMP eFuses [1]. The
> driver can be accessed by the 'fuse read' and 'fuse write' commands
> 
> Example:
> 
> => fuse read 0 0xc 3
> Reading bank 0:
> 
> Word 0x0000000c: 3cb16685 013af244 40000000
> 
> Note: Accessing eFuses requires eFuse access to be enabled in the
> underlying PMU firmware.

Can you please put this note to 2/2 commit msg?

Thanks,
Michal