[PATCH v4] fdt: automatically add /chosen/kaslr-seed if DM_RNG is enabled
Simon Glass
sjg at chromium.org
Wed May 29 18:30:04 CEST 2024
Hi Tim,
On Sat, 25 May 2024 at 14:02, Tim Harvey <tharvey at gateworks.com> wrote:
>
> If RANDOMIZE_BASE is enabled in the Linux kernel instructing it to
> randomize the virtual address at which the kernel image is loaded, it
> expects entropy to be provided by the bootloader by populating
> /chosen/kaslr-seed with a 64-bit value from source of entropy at boot.
>
> If we have DM_RNG enabled populate this value automatically when
> fdt_chosen is called. We skip this if ARMV8_SEC_FIRMWARE_SUPPORT
> is enabled as it's implementation uses a different source of entropy
its
> that is not yet implemented as DM_RNG. We also skip this if
> MEASURED_BOOT is enabled as in that case any modifications to the
> dt will cause measured boot to fail (although there are many other
> places the dt is altered).
>
> As this fdt node is added elsewhere create a library function and
> use it to deduplicate code. We will provide a parameter to specify the
> index of the rng device as well as a boolean to overwrite if present.
>
> For our automatic injection, we will use the first rng device and
> not overwrite if already present with a non-zero value (which may
> have been populated by an earlier boot stage). This way if a board
> specific ft_board_setup() function wants to customize this behavior
> it can call fdt_kaslrseed with a rng device index of its choosing and
> set overwrite true.
I suggest creating a sysinfo driver which can provide the RNG device.
>
> Note that the kalsrseed command (CMD_KASLRSEED) is likely pointless now
> but left in place in case boot scripts exist that rely on this command
> existing and returning success. An informational message is printed to
> alert users of this command that it is likely no longer needed.
>
> Note that the Kernel's EFI STUB only relies on EFI_RNG_PROTOCOL for
> randomization and completely ignores the kaslr-seed for its own
> randomness needs (i.e the randomization of the physical placement of
> the kernel). It gets weeded out from the DTB that gets handed over via
> efi_install_fdt() as it would also mess up the measured boot DTB TPM
> measurements as well.
>
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> Cc: Michal Simek <michal.simek at amd.com>
> Cc: Andy Yan <andy.yan at rock-chips.com>
> Cc: Akash Gajjar <gajjar04akash at gmail.com>
> Cc: Ilias Apalodimas <ilias.apalodimas at linaro.org>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
> Cc: Devarsh Thakkar <devarsht at ti.com>
> Cc: Heinrich Schuchardt <xypron.glpk at gmx.de>
> Cc: Hugo Villeneuve <hvilleneuve at dimonoff.com>
> Cc: Marek Vasut <marex at denx.de>
> Cc: Tom Rini <trini at konsulko.com>
> Cc: Chris Morgan <macromorgan at hotmail.com>
> ---
> v4:
> - add missing /n to notice in kaslrseed cmd
> - combine ints in declaration
> - remove unused vars from board/xilinx/common/board.c ft_board_setup
> v3:
> - skip if CONFIG_MEASURED_BOOT
> - fix skip for CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
> - pass in rng index and bool to specify overwrite
> - remove duplicate error strings printed outside of fdt_kaslrseed
> - added note to commit log about how EFI STUB weeds out kalsr-seed
> v2:
> - fix typo in commit msg
> - use stack for seed to avoid unecessary malloc/free
> - move to a library function and deduplicate code by using it
> elsewhere
> ---
> board/xilinx/common/board.c | 40 ------------------------------
> boot/fdt_support.c | 6 +++++
> boot/pxe_utils.c | 35 ++------------------------
> cmd/kaslrseed.c | 45 +++++-----------------------------
> include/kaslrseed.h | 19 ++++++++++++++
> lib/Makefile | 1 +
> lib/kaslrseed.c | 49 +++++++++++++++++++++++++++++++++++++
> 7 files changed, 83 insertions(+), 112 deletions(-)
> create mode 100644 include/kaslrseed.h
> create mode 100644 lib/kaslrseed.c
Are you able to split this patch into a few patches, one of which
handles the refactoring first?
>
> diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
> index 30a81376ac41..0b43407b9e94 100644
> --- a/board/xilinx/common/board.c
> +++ b/board/xilinx/common/board.c
> @@ -701,11 +701,6 @@ phys_addr_t board_get_usable_ram_top(phys_size_t total_size)
> #define MAX_RAND_SIZE 8
> int ft_board_setup(void *blob, struct bd_info *bd)
> {
> - size_t n = MAX_RAND_SIZE;
> - struct udevice *dev;
> - u8 buf[MAX_RAND_SIZE];
> - int nodeoffset, ret;
> -
> static const struct node_info nodes[] = {
> { "arm,pl353-nand-r2p1", MTD_DEV_TYPE_NAND, },
> };
> @@ -713,41 +708,6 @@ int ft_board_setup(void *blob, struct bd_info *bd)
> if (IS_ENABLED(CONFIG_FDT_FIXUP_PARTITIONS) && IS_ENABLED(CONFIG_NAND_ZYNQ))
> fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
>
> - if (uclass_get_device(UCLASS_RNG, 0, &dev) || !dev) {
> - debug("No RNG device\n");
> - return 0;
> - }
> -
> - if (dm_rng_read(dev, buf, n)) {
> - debug("Reading RNG failed\n");
> - return 0;
> - }
> -
> - if (!blob) {
> - debug("No FDT memory address configured. Please configure\n"
> - "the FDT address via \"fdt addr <address>\" command.\n"
> - "Aborting!\n");
> - return 0;
> - }
> -
> - ret = fdt_check_header(blob);
> - if (ret < 0) {
> - debug("fdt_chosen: %s\n", fdt_strerror(ret));
> - return ret;
> - }
> -
> - nodeoffset = fdt_find_or_add_subnode(blob, 0, "chosen");
> - if (nodeoffset < 0) {
> - debug("Reading chosen node failed\n");
> - return nodeoffset;
> - }
> -
> - ret = fdt_setprop(blob, nodeoffset, "kaslr-seed", buf, sizeof(buf));
> - if (ret < 0) {
> - debug("Unable to set kaslr-seed on chosen node: %s\n", fdt_strerror(ret));
> - return ret;
> - }
> -
> return 0;
> }
> #endif
> diff --git a/boot/fdt_support.c b/boot/fdt_support.c
> index 874ca4d6f5af..b64cdd34825a 100644
> --- a/boot/fdt_support.c
> +++ b/boot/fdt_support.c
> @@ -8,6 +8,7 @@
>
> #include <abuf.h>
> #include <env.h>
> +#include <kaslrseed.h>
> #include <log.h>
> #include <mapmem.h>
> #include <net.h>
> @@ -300,6 +301,11 @@ int fdt_chosen(void *fdt)
> if (nodeoffset < 0)
> return nodeoffset;
>
> + if (IS_ENABLED(CONFIG_DM_RNG) &&
> + !IS_ENABLED(CONFIG_MEASURED_BOOT) &&
> + !IS_ENABLED(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT))
> + fdt_kaslrseed(fdt, 0, false);
> +
This looks like it needs a new Kconfig to enable this behaviour,
rather than inferring it from others.
> if (IS_ENABLED(CONFIG_BOARD_RNG_SEED) && !board_rng_seed(&buf)) {
> err = fdt_setprop(fdt, nodeoffset, "rng-seed",
> abuf_data(&buf), abuf_size(&buf));
> diff --git a/boot/pxe_utils.c b/boot/pxe_utils.c
> index 4b22bb6f525a..35d5b9ed3ecc 100644
> --- a/boot/pxe_utils.c
> +++ b/boot/pxe_utils.c
> @@ -8,6 +8,7 @@
> #include <dm.h>
> #include <env.h>
> #include <image.h>
> +#include <kaslrseed.h>
> #include <log.h>
> #include <malloc.h>
> #include <mapmem.h>
> @@ -323,10 +324,6 @@ static void label_boot_kaslrseed(void)
> #if CONFIG_IS_ENABLED(DM_RNG)
> ulong fdt_addr;
> struct fdt_header *working_fdt;
> - size_t n = 0x8;
> - struct udevice *dev;
> - u64 *buf;
> - int nodeoffset;
> int err;
>
> /* Get the main fdt and map it */
> @@ -342,35 +339,7 @@ static void label_boot_kaslrseed(void)
> if (err <= 0)
> return;
>
> - if (uclass_get_device(UCLASS_RNG, 0, &dev) || !dev) {
> - printf("No RNG device\n");
> - return;
> - }
> -
> - nodeoffset = fdt_find_or_add_subnode(working_fdt, 0, "chosen");
> - if (nodeoffset < 0) {
> - printf("Reading chosen node failed\n");
> - return;
> - }
> -
> - buf = malloc(n);
> - if (!buf) {
> - printf("Out of memory\n");
> - return;
> - }
> -
> - if (dm_rng_read(dev, buf, n)) {
> - printf("Reading RNG failed\n");
> - goto err;
> - }
> -
> - err = fdt_setprop(working_fdt, nodeoffset, "kaslr-seed", buf, sizeof(buf));
> - if (err < 0) {
> - printf("Unable to set kaslr-seed on chosen node: %s\n", fdt_strerror(err));
> - goto err;
> - }
> -err:
> - free(buf);
> + fdt_kaslrseed(working_fdt, 0, true);
> #endif
> return;
> }
> diff --git a/cmd/kaslrseed.c b/cmd/kaslrseed.c
> index e0d3c7fe7489..ebe4058d7ac6 100644
> --- a/cmd/kaslrseed.c
> +++ b/cmd/kaslrseed.c
> @@ -9,33 +9,16 @@
> #include <command.h>
> #include <dm.h>
> #include <hexdump.h>
> +#include <kaslrseed.h>
> #include <malloc.h>
> #include <rng.h>
> #include <fdt_support.h>
>
> static int do_kaslr_seed(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
> {
> - size_t n = 0x8;
> - struct udevice *dev;
> - u64 *buf;
> - int nodeoffset;
> - int ret = CMD_RET_SUCCESS;
> + int err;
>
> - if (uclass_get_device(UCLASS_RNG, 0, &dev) || !dev) {
> - printf("No RNG device\n");
> - return CMD_RET_FAILURE;
> - }
> -
> - buf = malloc(n);
> - if (!buf) {
> - printf("Out of memory\n");
> - return CMD_RET_FAILURE;
> - }
> -
> - if (dm_rng_read(dev, buf, n)) {
> - printf("Reading RNG failed\n");
> - return CMD_RET_FAILURE;
> - }
> + printf("Notice: a /chosen/kaslr-seed is automatically added to the device-tree when booted via booti/bootm/bootz therefore using this command is likely no longer needed\n");
>
> if (!working_fdt) {
> printf("No FDT memory address configured. Please configure\n"
> @@ -44,27 +27,11 @@ static int do_kaslr_seed(struct cmd_tbl *cmdtp, int flag, int argc, char *const
> return CMD_RET_FAILURE;
> }
>
> - ret = fdt_check_header(working_fdt);
> - if (ret < 0) {
> - printf("fdt_chosen: %s\n", fdt_strerror(ret));
> + err = fdt_kaslrseed(working_fdt, 0, true);
> + if (err < 0)
> return CMD_RET_FAILURE;
> - }
> -
> - nodeoffset = fdt_find_or_add_subnode(working_fdt, 0, "chosen");
> - if (nodeoffset < 0) {
> - printf("Reading chosen node failed\n");
> - return CMD_RET_FAILURE;
> - }
> -
> - ret = fdt_setprop(working_fdt, nodeoffset, "kaslr-seed", buf, sizeof(buf));
> - if (ret < 0) {
> - printf("Unable to set kaslr-seed on chosen node: %s\n", fdt_strerror(ret));
> - return CMD_RET_FAILURE;
> - }
> -
> - free(buf);
>
> - return ret;
> + return CMD_RET_SUCCESS;
> }
>
> U_BOOT_LONGHELP(kaslrseed,
> diff --git a/include/kaslrseed.h b/include/kaslrseed.h
> new file mode 100644
> index 000000000000..7f9911c59fa4
> --- /dev/null
> +++ b/include/kaslrseed.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright 2024 Tim Harvey <tharvey at gateworks.com>
> + */
> +
> +#if !defined _KASLRSEED_H_
> +#define _KASLRSEED_H_
> +
> +/**
> + * fdt_kaslrseed() - create a 'kaslr-seed' node in chosen
> + *
> + * @blob: fdt blob
> + * @index: index of UCLASS_RNG device to use
> + * @overwrite: do not overwrite existing non-zero node unless true
> + * Return: 0 if OK, -ve on error
> + */
> +int fdt_kaslrseed(void *blob, int index, bool overwrite);
> +
> +#endif /* _KASLRSEED_H_ */
> diff --git a/lib/Makefile b/lib/Makefile
> index 2a76acf100d0..20a0242055fa 100644
> --- a/lib/Makefile
> +++ b/lib/Makefile
> @@ -149,6 +149,7 @@ obj-y += date.o
> obj-y += rtc-lib.o
> obj-$(CONFIG_LIB_ELF) += elf.o
>
> +obj-$(CONFIG_DM_RNG) += kaslrseed.o
> obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o
>
> #
> diff --git a/lib/kaslrseed.c b/lib/kaslrseed.c
> new file mode 100644
> index 000000000000..5ba3700e9e06
> --- /dev/null
> +++ b/lib/kaslrseed.c
Shouldn't this go in fdt_support.c ?
> @@ -0,0 +1,49 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2024 Tim Harvey <tharvey at gateworks.com>
> + */
> +#include <dm.h>
> +#include <rng.h>
> +#include <fdt_support.h>
> +#include <dm/device_compat.h>
> +
> +int fdt_kaslrseed(void *fdt, int index, bool overwrite)
> +{
> + int len, err, nodeoffset;
> + struct udevice *dev;
> + const u64 *orig;
> + u64 data = 0;
> +
> + err = fdt_check_header(fdt);
> + if (err < 0)
> + return err;
> +
> + /* find or create "/chosen" node. */
> + nodeoffset = fdt_find_or_add_subnode(fdt, 0, "chosen");
> + if (nodeoffset < 0)
> + return nodeoffset;
> +
> + /* return without error if we are not overwriting and existing non-zero node */
> + orig = fdt_getprop(fdt, nodeoffset, "kaslr-seed", &len);
> + if (orig && len == sizeof(*orig))
> + data = fdt64_to_cpu(*orig);
> + if (data && !overwrite) {
> + debug("not overwriting existing kaslr-seed\n");
> + return 0;
> + }
> + err = uclass_get_device(UCLASS_RNG, index, &dev);
> + if (err) {
> + printf("No RNG device at index %d\n", index);
> + return err;
> + }
> + err = dm_rng_read(dev, &data, sizeof(data));
> + if (err) {
> + dev_err(dev, "dm_rng_read failed: %d\n", err);
> + return err;
> + }
> + err = fdt_setprop(fdt, nodeoffset, "kaslr-seed", &data, sizeof(data));
> + if (err < 0)
> + printf("WARNING: could not set kaslr-seed %s.\n", fdt_strerror(err));
> +
> + return err;
> +}
> --
> 2.25.1
>
Regards,
Simon
More information about the U-Boot
mailing list