[PATCH 14/14] doc: board: ti: Add J722S-EVM documentation
Neha Malcom Francis
n-francis at ti.com
Thu May 30 04:51:38 CEST 2024
On 29/05/24 18:54, Jayesh Choudhary wrote:
> Introduce basic documentation for the J722S-EVM.
>
> Signed-off-by: Jayesh Choudhary <j-choudhary at ti.com>
> ---
> doc/board/ti/j722s_evm.rst | 260 +++++++++++++++++++++++++++++++++++++
> doc/board/ti/k3.rst | 1 +
> 2 files changed, 261 insertions(+)
> create mode 100644 doc/board/ti/j722s_evm.rst
>
> diff --git a/doc/board/ti/j722s_evm.rst b/doc/board/ti/j722s_evm.rst
> new file mode 100644
> index 0000000000..10b243908a
> --- /dev/null
> +++ b/doc/board/ti/j722s_evm.rst
> @@ -0,0 +1,260 @@
> +.. SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> +.. sectionauthor:: Jayesh Choudhary <j-choudhary at ti.com>
> +
> +J722S-EVM Platform
> +==================
> +
> +The J722S is a family of application processors built for Automotive and
> +Linux Application development. J722S family of SoCs is a superset of the
> +AM62P SoC family and shares similar memory map, thus the nodes are being
> +reused from AM62P includes instead of duplicating the definitions.
> +
> +Some highlights of J722S SoC (in addition to AM62P SoC features) are:
> +
> +* Two Cortex-R5F for Functional Safety or general-purpose usage and
> + two C7x floating point vector DSP with Matrix Multiply Accelerator
> + for deep learning.
> +
> +* Vision Processing Accelerator (VPAC) with image signal processor
> + and Depth and Motion Processing Accelerator (DMPAC).
> +
> +* 7xUARTs, 3xSPI, 5xI2C, 2xUSB2, 2xCAN-FD, 3xMMC and SD, GPMC for
> + NAND/FPGA connection, OSPI memory controller, 5xMcASP for audio,
> + 4xCSI-RX for Camera, 1 PCIe Gen3 controller, USB3.0 eCAP/eQEP,
> + ePWM, among other peripherals.
> +
> +For those interested, more details about this SoC can be found in the
> +Technical Reference Manual here: https://www.ti.com/lit/zip/sprujb3
> +
> +Boot Flow:
> +----------
> +
> +The bootflow is exactly the same as all SoCs in the am62xxx extended SoC
> +family. Below is the pictorial representation:
> +
> +.. image:: img/boot_diagram_k3_current.svg
> + :alt: Boot flow diagram
> +
> +- Here TIFS acts as master and provides all the critical services. R5/A53
> + requests TIFS to get these services done as shown in the above diagram.
> +
> +Sources:
> +--------
> +
> +.. include:: ../ti/k3.rst
> + :start-after: .. k3_rst_include_start_boot_sources
> + :end-before: .. k3_rst_include_end_boot_sources
> +
> +Build procedure:
> +----------------
> +
> +0. Setup the environment variables:
> +
> +.. include:: ../ti/k3.rst
> + :start-after: .. k3_rst_include_start_common_env_vars_desc
> + :end-before: .. k3_rst_include_end_common_env_vars_desc
> +
> +.. include:: ../ti/k3.rst
> + :start-after: .. k3_rst_include_start_board_env_vars_desc
> + :end-before: .. k3_rst_include_end_board_env_vars_desc
> +
> +Set the variables corresponding to this platform:
> +
> +.. include:: ../ti/k3.rst
> + :start-after: .. k3_rst_include_start_common_env_vars_defn
> + :end-before: .. k3_rst_include_end_common_env_vars_defn
> +
> +.. code-block:: bash
> +
> + $ export UBOOT_CFG_CORTEXR=j722s_evm_r5_defconfig
> + $ export UBOOT_CFG_CORTEXA=j722s_evm_a53_defconfig
> + $ export TFA_BOARD=lite
> + $ export OPTEE_PLATFORM=k3-am62x
> + $ export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y"
> +
> +.. j722s_evm_rst_include_start_build_steps
> +
> +1. Trusted Firmware-A:
> +
> +.. include:: ../ti/k3.rst
> + :start-after: .. k3_rst_include_start_build_steps_tfa
> + :end-before: .. k3_rst_include_end_build_steps_tfa
> +
> +
> +2. OP-TEE:
> +
> +.. include:: ../ti/k3.rst
> + :start-after: .. k3_rst_include_start_build_steps_optee
> + :end-before: .. k3_rst_include_end_build_steps_optee
> +
> +3. U-Boot:
> +
> +* 3.1 R5:
> +
> +.. include:: ../ti/k3.rst
> + :start-after: .. k3_rst_include_start_build_steps_spl_r5
> + :end-before: .. k3_rst_include_end_build_steps_spl_r5
> +
> +* 3.2 A53:
> +
> +.. include:: ../ti/k3.rst
> + :start-after: .. k3_rst_include_start_build_steps_uboot
> + :end-before: .. k3_rst_include_end_build_steps_uboot
> +.. j722s_evm_rst_include_end_build_steps
> +
> +Target Images
> +--------------
> +
> +In order to boot we need tiboot3.bin, tispl.bin and u-boot.img. Each SoC
> +variant (HS-FS, HS-SE) requires a different source for these files.
> +
> + - HS-FS
> +
> + * tiboot3-j722s-hs-fs-evm.bin from step 3.1
> + * tispl.bin, u-boot.img from step 3.2
> +
> + - HS-SE
> +
> + * tiboot3-j722s-hs-evm.bin from step 3.1
> + * tispl.bin, u-boot.img from step 3.2
> +
> +Image formats:
> +--------------
> +
> +- tiboot3.bin
> +
> +.. image:: img/multi_cert_tiboot3.bin.svg
> + :alt: tiboot3.bin image format
> +
> +- tispl.bin
> +
> +.. image:: img/dm_tispl.bin.svg
> + :alt: tispl.bin image format
> +
> +A53 SPL DDR Memory Layout
> +-------------------------
> +
> +.. j722s_evm_rst_include_start_ddr_mem_layout
> +
> +This provides an overview memory usage in A53 SPL stage.
> +
> +.. list-table::
> + :widths: 16 16 16
> + :header-rows: 1
> +
> + * - Region
> + - Start Address
> + - End Address
> +
> + * - EMPTY
> + - 0x80000000
> + - 0x80080000
> +
> + * - TEXT BASE
> + - 0x80080000
> + - 0x800d8000
> +
> + * - EMPTY
> + - 0x800d8000
> + - 0x80477660
> +
> + * - STACK
> + - 0x80477660
> + - 0x80477e60
> +
> + * - GD
> + - 0x80477e60
> + - 0x80478000
> +
> + * - MALLOC
> + - 0x80478000
> + - 0x80480000
> +
> + * - EMPTY
> + - 0x80480000
> + - 0x80a00000
> +
> + * - BSS
> + - 0x80a00000
> + - 0x80a80000
> +
> + * - BLOBS
> + - 0x80a80000
> + - 0x80d00400
> +
> + * - EMPTY
> + - 0x80d00400
> + - 0x81000000
> +.. j722s_evm_rst_include_end_ddr_mem_layout
> +
> +Switch Setting for Boot Mode
> +----------------------------
> +
> +Boot Mode pins provide means to select the boot mode and options before the
> +device is powered up. After every POR, they are the main source to populate
> +the Boot Parameter Tables.
> +
> +The following table shows some common boot modes used on J722S-EVM
> +platform. More details can be found in the Technical Reference Manual:
> +https://www.ti.com/lit/zip/sprujb3 under the `Boot Mode Pins` section.
> +
> +.. note::
> +
> + This device is very new. Currently only UART boot is available while
> + we continue to add support for the other bootmodes.
> +
> +.. list-table:: Boot Modes
> + :widths: 16 16 16
> + :header-rows: 1
> +
> + * - Switch Label
> + - SW3: 12345678
> + - SW4: 12345678
> +
> + * - SD
> + - 11000010
> + - 01000000
> +
> + * - OSPI
> + - 11001110
> + - 00000000
> +
> + * - EMMC
> + - 11010010
> + - 00000000
> +
> + * - UART
> + - 11011100
> + - 00000000
> +
> + * - USB DFU
> + - 11001010
> + - 00000000
> +
> +For SW2 and SW1, the switch state in the "ON" position = 1.
> +
> +Debugging U-Boot
> +----------------
> +
> +See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for
> +detailed setup information.
> +
> +.. warning::
> +
> + **OpenOCD support after**: v0.12.0
> +
> + While support for the entire K3 generation including the am62xxx
> + extended family was added before v0.12.0, the tcl scripts for the
> + am62px have been accepted and will be available in the next release of
> + OpenOCD. It may be necessary to build OpenOCD from source depending on
> + the version your distribution has packaged.
> +
> +.. include:: k3.rst
> + :start-after: .. k3_rst_include_start_openocd_connect_XDS110
> + :end-before: .. k3_rst_include_end_openocd_connect_XDS110
> +
> +To start OpenOCD and connect to the board
> +
> +.. code-block:: bash
> +
> + openocd -f board/ti_j722sevm.cfg
> diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst
> index a1c01d1cf0..eba0f0e3e4 100644
> --- a/doc/board/ti/k3.rst
> +++ b/doc/board/ti/k3.rst
> @@ -42,6 +42,7 @@ K3 Based SoCs
> ../beagle/j721e_beagleboneai64
> j721e_evm
> j721s2_evm
> + j722s_evm
> j784s4_evm
>
> Boot Flow Overview
Reviewed-by: Neha Malcom Francis <n-francis at ti.com>
--
Thanking You
Neha Malcom Francis
More information about the U-Boot
mailing list