[RESEND PATCH 3/4] omap3: igep0x00: Update for DM SPL support

[Enric Balletbo Serra]

Hi Javier,

Thanks for the patches.

Missatge de Javier Martinez Canillas <javier at dowhile0.org> del dia
ds., 18 de maig 2024 a les 15:06:
>
> From: Javier Martinez Canillas <javierm at redhat.com>
>
> This change is heavily based on commit e0cc7df9fdf2 ("omap3_beagle: Update
> for DM SPL support"), that did the same update for the OMAP3 Beagle board.
>
> Signed-off-by: Javier Martinez Canillas <javierm at redhat.com>

Reviewed-by: Enric Balletbo i Serra <eballetbo at gmail.com>

> ---
>
>  arch/arm/dts/omap3-igep0020-u-boot.dtsi | 14 ++------------
>  board/isee/igep00x0/igep00x0.c          | 12 ------------
>  configs/igep00x0_defconfig              | 17 ++++++++---------
>  3 files changed, 10 insertions(+), 33 deletions(-)
>
> diff --git a/arch/arm/dts/omap3-igep0020-u-boot.dtsi b/arch/arm/dts/omap3-igep0020-u-boot.dtsi
> index 41beaf0900c3..2c03701c896a 100644
> --- a/arch/arm/dts/omap3-igep0020-u-boot.dtsi
> +++ b/arch/arm/dts/omap3-igep0020-u-boot.dtsi
> @@ -5,20 +5,10 @@
>   * (C) Copyright 2017 Derald D. Woods <woods.technical at gmail.com>
>   */
>
> +#include "omap3-u-boot.dtsi"
> +
>  / {
>         chosen {
>                 stdout-path = &uart3;
>         };
>  };
> -
> -&uart1 {
> -       reg-shift = <2>;
> -};
> -
> -&uart2 {
> -       reg-shift = <2>;
> -};
> -
> -&uart3 {
> -       reg-shift = <2>;
> -};
> diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
> index 8a3f290f678f..a35a7cd3b1f7 100644
> --- a/board/isee/igep00x0/igep00x0.c
> +++ b/board/isee/igep00x0/igep00x0.c
> @@ -29,18 +29,6 @@
>  #include <fdt_support.h>
>  #include "igep00x0.h"
>
> -static const struct ns16550_plat igep_serial = {
> -       .base = OMAP34XX_UART3,
> -       .reg_shift = 2,
> -       .clock = V_NS16550_CLK,
> -       .fcr = UART_FCR_DEFVAL,
> -};
> -
> -U_BOOT_DRVINFO(igep_uart) = {
> -       "ns16550_serial",
> -       &igep_serial
> -};
> -
>  /*
>   * Routine: get_board_revision
>   * Description: GPIO_28 and GPIO_129 are used to read board and revision from
> diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig
> index 6df6c33e25ab..c1b873a17efb 100644
> --- a/configs/igep00x0_defconfig
> +++ b/configs/igep00x0_defconfig
> @@ -1,4 +1,6 @@
>  CONFIG_ARM=y
> +# CONFIG_SPL_USE_ARCH_MEMCPY is not set
> +# CONFIG_SPL_USE_ARCH_MEMSET is not set
>  CONFIG_ARCH_OMAP2PLUS=y
>  CONFIG_SYS_MALLOC_F_LEN=0x4000
>  CONFIG_TI_COMMON_CMD_OPTIONS=y
> @@ -40,16 +42,7 @@ CONFIG_SPL_UBI_LEB_START=2048
>  CONFIG_SPL_UBI_INFO_ADDR=0x88080000
>  CONFIG_SPL_UBI_VOL_IDS=8
>  CONFIG_SPL_UBI_LOAD_MONITOR_ID=0
> -CONFIG_SPL_UBI_LOAD_KERNEL_ID=3
> -CONFIG_SPL_UBI_LOAD_ARGS_ID=4
>  CONFIG_SPL_ONENAND_SUPPORT=y
> -CONFIG_SPL_OS_BOOT=y
> -CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000
> -CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
> -CONFIG_SPL_FALCON_BOOT_MMCSD=y
> -CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
> -CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500
> -CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200
>  CONFIG_CMD_SPL=y
>  CONFIG_CMD_NAND=y
>  CONFIG_CMD_ONENAND=y
> @@ -59,7 +52,11 @@ CONFIG_CMD_CACHE=y
>  CONFIG_CMD_MTDPARTS=y
>  CONFIG_CMD_UBI=y
>  # CONFIG_CMD_UBIFS is not set
> +# CONFIG_SPL_EFI_PARTITION is not set
> +CONFIG_SPL_PARTITION_UUIDS=y
>  CONFIG_OF_CONTROL=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent"
>  CONFIG_ENV_OVERWRITE=y
>  CONFIG_ENV_IS_IN_UBI=y
>  CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
> @@ -69,6 +66,7 @@ CONFIG_ENV_UBI_VOLUME_REDUND="config_r"
>  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>  CONFIG_VERSION_VARIABLE=y
>  # CONFIG_NET is not set
> +CONFIG_SPL_DM=y
>  CONFIG_SYS_I2C_LEGACY=y
>  CONFIG_SPL_SYS_I2C_LEGACY=y
>  CONFIG_MMC_OMAP_HS=y
> @@ -81,5 +79,6 @@ CONFIG_SYS_NAND_PAGE_SIZE=0x800
>  CONFIG_SYS_NAND_OOBSIZE=0x40
>  CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
>  CONFIG_MTD_UBI_FASTMAP=y
> +CONFIG_SPECIFY_CONSOLE_INDEX=y
>  CONFIG_CONS_INDEX=3
>  CONFIG_BCH=y
> --
> 2.45.0
>