[PATCH] arm64: zynqmp: Update rproc node

Tanmay Shah tanmay.shah at amd.com
Fri May 31 00:16:34 CEST 2024



On 5/30/24 5:39 AM, Michal Simek wrote:
> remoteproc node should be updated to be aligned with the latest dt-schema.
> 
> Signed-off-by: Michal Simek <michal.simek at amd.com>
> ---
> 
> Once we push all dts to Linux we can change to OF_UPSTREAM but till that
> time we need to keep DTSes in sync.
> ---
>  arch/arm/dts/zynqmp.dtsi                      | 67 +++++++++++++++++--
>  include/dt-bindings/power/xlnx-zynqmp-power.h | 17 ++---
>  2 files changed, 68 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
> index 53a606c340a4..34f592c1a85f 100644
> --- a/arch/arm/dts/zynqmp.dtsi
> +++ b/arch/arm/dts/zynqmp.dtsi
> @@ -314,19 +314,76 @@
>  		ranges;
>  	};
>  
> -	remoteproc {
> +	rproc_lockstep: remoteproc at ffe00000 {
>  		compatible = "xlnx,zynqmp-r5fss";
>  		xlnx,cluster-mode = <1>;
> +		xlnx,tcm-mode = <1>;
>  
> -		r5f-0 {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +
> +		ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
> +			 <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
> +			 <0x0 0x10000 0x0 0xffe10000 0x0 0x10000>,
> +			 <0x0 0x30000 0x0 0xffe30000 0x0 0x10000>;
> +
> +		r5f at 0 {
> +			compatible = "xlnx,zynqmp-r5f";
> +			reg = <0x0 0x0 0x0 0x10000>,
> +			      <0x0 0x20000 0x0 0x10000>,
> +			      <0x0 0x10000 0x0 0x10000>,
> +			      <0x0 0x30000 0x0 0x10000>;
> +			reg-names = "atcm0", "btcm0", "atcm1", "btcm1";
> +			power-domains = <&zynqmp_firmware PD_RPU_0>,
> +					<&zynqmp_firmware PD_R5_0_ATCM>,
> +					<&zynqmp_firmware PD_R5_0_BTCM>,
> +					<&zynqmp_firmware PD_R5_1_ATCM>,
> +					<&zynqmp_firmware PD_R5_1_BTCM>;
> +			memory-region = <&rproc_0_fw_image>;
> +		};
> +
> +		r5f at 1 {
> +			compatible = "xlnx,zynqmp-r5f";
> +			reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
> +			reg-names = "atcm0", "btcm0";
> +			power-domains = <&zynqmp_firmware PD_RPU_1>,
> +					<&zynqmp_firmware PD_R5_1_ATCM>,
> +					<&zynqmp_firmware PD_R5_1_BTCM>;
> +			memory-region = <&rproc_1_fw_image>;
> +		};
> +	};
> +
> +	rproc_split: remoteproc-split at ffe00000 {
> +		status = "disabled";
> +		compatible = "xlnx,zynqmp-r5fss";
> +		xlnx,cluster-mode = <0>;
> +		xlnx,tcm-mode = <0>;
> +
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +
> +		ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
> +			 <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
> +			 <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
> +			 <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
> +
> +		r5f at 0 {
>  			compatible = "xlnx,zynqmp-r5f";
> -			power-domains = <&zynqmp_firmware PD_RPU_0>;
> +			reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
> +			reg-names = "atcm0", "btcm0";
> +			power-domains = <&zynqmp_firmware PD_RPU_0>,
> +					<&zynqmp_firmware PD_R5_0_ATCM>,
> +					<&zynqmp_firmware PD_R5_0_BTCM>;
>  			memory-region = <&rproc_0_fw_image>;
>  		};
>  
> -		r5f-1 {
> +		r5f at 1 {
>  			compatible = "xlnx,zynqmp-r5f";
> -			power-domains = <&zynqmp_firmware PD_RPU_1>;
> +			reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
> +			reg-names = "atcm0", "btcm0";
> +			power-domains = <&zynqmp_firmware PD_RPU_1>,
> +					<&zynqmp_firmware PD_R5_1_ATCM>,
> +					<&zynqmp_firmware PD_R5_1_BTCM>;
>  			memory-region = <&rproc_1_fw_image>;
>  		};
>  	};
> diff --git a/include/dt-bindings/power/xlnx-zynqmp-power.h b/include/dt-bindings/power/xlnx-zynqmp-power.h
> index e7eb0960480a..618024cbb20d 100644
> --- a/include/dt-bindings/power/xlnx-zynqmp-power.h
> +++ b/include/dt-bindings/power/xlnx-zynqmp-power.h
> @@ -6,16 +6,12 @@
>  #ifndef _DT_BINDINGS_ZYNQMP_POWER_H
>  #define _DT_BINDINGS_ZYNQMP_POWER_H
>  
> -#define		PD_RPU_0	6
> -#define		PD_RPU_1	7
> -#define		PD_OCM_BANK_0	11
> -#define		PD_OCM_BANK_1	12
> -#define		PD_OCM_BANK_2	13
> -#define		PD_OCM_BANK_3	14
> -#define		PD_TCM_BANK_0	15
> -#define		PD_TCM_BANK_1	16
> -#define		PD_TCM_BANK_2	17
> -#define		PD_TCM_BANK_3	18
> +#define		PD_RPU_0	7
> +#define		PD_RPU_1	8
> +#define		PD_R5_0_ATCM	15
> +#define		PD_R5_0_BTCM	16
> +#define		PD_R5_1_ATCM	17
> +#define		PD_R5_1_BTCM	18
>  #define		PD_USB_0	22
>  #define		PD_USB_1	23
>  #define		PD_TTC_0	24
> @@ -45,6 +41,5 @@
>  #define		PD_CAN_1	48
>  #define		PD_GPU		58
>  #define		PD_PCIE		59
> -#define		PD_PL		69

This last change looks unrelated. Other than that looks good to me.

Thanks.

>  
>  #endif



More information about the U-Boot mailing list