[PATCH RFC v2 04/23] rockchip: RK3399: Enable display cpuinfo support on all boards

[Anand Moon]

From: Anand Moon <anand at edgeble.ai>

Enable DISPLAY_CPUINFO options to support on all RK3399 boards.
Its used to determine the reset cause of the board.

Cc: Jagan Teki <jagan at edgeble.ai>
Signed-off-by: Anand Moon <anand at edgeble.ai>
Signed-off-by: Anand Moon <linux.amoon at gmail.com>
---
 configs/chromebook_bob_defconfig   | 1 -
 configs/chromebook_kevin_defconfig | 1 -
 2 files changed, 2 deletions(-)

diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
index acfe393410..2c1a8141c0 100644
--- a/configs/chromebook_bob_defconfig
+++ b/configs/chromebook_bob_defconfig
@@ -30,7 +30,6 @@ CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_SPL_FIT_SIGNATURE is not set
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
-# CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_BLOBLIST=y
diff --git a/configs/chromebook_kevin_defconfig b/configs/chromebook_kevin_defconfig
index 95fdb418d8..f6649804c7 100644
--- a/configs/chromebook_kevin_defconfig
+++ b/configs/chromebook_kevin_defconfig
@@ -31,7 +31,6 @@ CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_SPL_FIT_SIGNATURE is not set
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-kevin.dtb"
-# CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_BLOBLIST=y
-- 
2.44.0