[PATCH RFC v2 19/23] rockchip: RV1108: Enable display cpuinfo support on all boards

[Anand Moon]

From: Anand Moon <anand at edgeble.ai>

Enable DISPLAY_CPUINFO options to support on all RV1108 boards.
Its used to determine the reset cause of the board.

Cc: Jagan Teki <jagan at edgeble.ai>
Signed-off-by: Anand Moon <anand at edgeble.ai>
Signed-off-by: Anand Moon <linux.amoon at gmail.com>
---
 configs/elgin-rv1108_defconfig | 1 -
 configs/evb-rv1108_defconfig   | 1 -
 2 files changed, 2 deletions(-)

diff --git a/configs/elgin-rv1108_defconfig b/configs/elgin-rv1108_defconfig
index 454ed9e0a6..1fffa99793 100644
--- a/configs/elgin-rv1108_defconfig
+++ b/configs/elgin-rv1108_defconfig
@@ -17,7 +17,6 @@ CONFIG_SYS_LOAD_ADDR=0x62000000
 CONFIG_DEBUG_UART=y
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_DEFAULT_FDT_FILE="rv1108-elgin-r1.dtb"
-# CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_LATE_INIT=y
diff --git a/configs/evb-rv1108_defconfig b/configs/evb-rv1108_defconfig
index 6204cb4b96..8bff3a99e5 100644
--- a/configs/evb-rv1108_defconfig
+++ b/configs/evb-rv1108_defconfig
@@ -14,7 +14,6 @@ CONFIG_SYS_LOAD_ADDR=0x62000000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTCOMMAND="sf probe;sf read 0x62000000 0x140800 0x500000;dcache off;go 0x62000000"
 CONFIG_DEFAULT_FDT_FILE="rv1108-evb.dtb"
-# CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_CMD_USB=y
-- 
2.44.0