[RESEND PATCH v4 3/3] venice: show emmc boot hardware partition
Tim Harvey
tharvey at gateworks.com
Fri May 31 17:36:35 CEST 2024
To aid in understanding what emmc hardware partition is being
used to boot on power-up, display the hardware partition name in the
SPL.
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
v4: new patch for this series
---
board/gateworks/venice/spl.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/board/gateworks/venice/spl.c b/board/gateworks/venice/spl.c
index 6f6dea84feee..ad3af93143d9 100644
--- a/board/gateworks/venice/spl.c
+++ b/board/gateworks/venice/spl.c
@@ -366,16 +366,24 @@ unsigned long board_spl_mmc_get_uboot_raw_sector(struct mmc *mmc, unsigned long
const char *spl_board_loader_name(u32 boot_device)
{
+ static char name[16];
+ struct mmc *mmc;
+
switch (boot_device) {
/* SDHC2 */
case BOOT_DEVICE_MMC1:
- return "eMMC";
+ mmc_init_device(0);
+ mmc = find_mmc_device(0);
+ mmc_init(mmc);
+ snprintf(name, sizeof(name), "eMMC %s", emmc_hwpart_names[EXT_CSD_EXTRACT_BOOT_PART(mmc->part_config)]);
+ return name;
/* SDHC3 */
case BOOT_DEVICE_MMC2:
- return "SD card";
- default:
- return NULL;
+ sprintf(name, "SD card");
+ return name;
}
+
+ return NULL;
}
void spl_board_init(void)
--
2.25.1
More information about the U-Boot
mailing list