[PATCH v2 1/1] drivers: bootcount: Add ZynqMP specific bootcount support

[Michal Simek]

On 11/5/24 08:49, Vasileios Amoiridis wrote:
> From: Vasileios Amoiridis <vasileios.amoiridis at cern.ch>
> 
> Add native support of the bootcount mechanism in the ZynqMP by
> utilising internal PMU registers. The Persistent Global Storage
> Registers of the Platform Management Unit can keep their value
> during reboot cycles unless there is a POR reset, making them
> appropriate for the bootcount mechanism.
> 
> Signed-off-by: Vasileios Amoiridis <vasileios.amoiridis at cern.ch>
> ---
>   MAINTAINERS                                  |  1 +
>   arch/arm/mach-zynqmp/include/mach/hardware.h |  2 +
>   drivers/bootcount/Kconfig                    |  6 +++
>   drivers/bootcount/Makefile                   |  1 +
>   drivers/bootcount/bootcount_zynqmp.c         | 47 ++++++++++++++++++++
>   5 files changed, 57 insertions(+)
>   create mode 100644 drivers/bootcount/bootcount_zynqmp.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0399ed1dbf..bc27a514e8 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -860,6 +860,7 @@ M:	Michal Simek <michal.simek at amd.com>
>   S:	Maintained
>   T:	git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
>   F:	arch/arm/mach-zynqmp/
> +F:	drivers/bootcount/bootcount_zynqmp.c
>   F:	drivers/clk/clk_zynqmp.c
>   F:	driver/firmware/firmware-zynqmp.c
>   F:	drivers/fpga/zynqpl.c
> diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h
> index 49e449ebd6..3c372bd6dc 100644
> --- a/arch/arm/mach-zynqmp/include/mach/hardware.h
> +++ b/arch/arm/mach-zynqmp/include/mach/hardware.h
> @@ -188,6 +188,8 @@ struct pmu_regs {
>   	u32 gen_storage4; /* 0x40 */
>   	u32 reserved1[1];
>   	u32 gen_storage6; /* 0x48 */
> +	u32 reserved2[3];
> +	u32 pers_gen_storage2; /* 0x58 */
>   };
>   
>   #define pmu_base ((struct pmu_regs *)ZYNQMP_PMU_BASEADDR)
> diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
> index fa6d8e7128..f91074d5b4 100644
> --- a/drivers/bootcount/Kconfig
> +++ b/drivers/bootcount/Kconfig
> @@ -164,6 +164,12 @@ config DM_BOOTCOUNT_SYSCON
>   
>   	  Accessing the backend is done using the regmap interface.
>   
> +config DM_BOOTCOUNT_ZYNQMP
> +	bool "Support ZynqMP PMUFW as a backing store for bootcount"

depends on ARCH_ZYNQMP


> +	help
> +	  Enable support for the bootcount API by utilising the Persistent
> +	  Global General Storage Register 2 of the PMU.
> +
>   endmenu
>   
>   endif
> diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile
> index 245f879633..0cf79e428d 100644
> --- a/drivers/bootcount/Makefile
> +++ b/drivers/bootcount/Makefile
> @@ -16,3 +16,4 @@ obj-$(CONFIG_DM_BOOTCOUNT_I2C_EEPROM)	+= i2c-eeprom.o
>   obj-$(CONFIG_DM_BOOTCOUNT_I2C)	+= bootcount_dm_i2c.o
>   obj-$(CONFIG_DM_BOOTCOUNT_SPI_FLASH)	+= spi-flash.o
>   obj-$(CONFIG_DM_BOOTCOUNT_SYSCON) += bootcount_syscon.o
> +obj-$(CONFIG_DM_BOOTCOUNT_ZYNQMP)	+= bootcount_zynqmp.o
> diff --git a/drivers/bootcount/bootcount_zynqmp.c b/drivers/bootcount/bootcount_zynqmp.c
> new file mode 100644
> index 0000000000..060bbdbae9
> --- /dev/null
> +++ b/drivers/bootcount/bootcount_zynqmp.c
> @@ -0,0 +1,47 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// SPDX-FileCopyrightText: 2024 CERN (home.cern)
> +
> +#include <asm/arch/hardware.h>
> +#include <bootcount.h>
> +#include <dm.h>
> +#include <dm/platdata.h>
> +#include <stdio.h>
> +#include <zynqmp_firmware.h>

Please read this.
https://docs.u-boot.org/en/latest/develop/codingstyle.html#include-files

M