[PATCH v3 1/1] drivers: bootcount: Add ZynqMP specific bootcount support

Vasileios Amoiridis vassilisamir at gmail.com
Tue Nov 5 14:27:44 CET 2024


From: Vasileios Amoiridis <vasileios.amoiridis at cern.ch>

Add native support of the bootcount mechanism in the ZynqMP by
utilising internal PMU registers. The Persistent Global Storage
Registers of the Platform Management Unit can keep their value
during reboot cycles unless there is a POR reset, making them
appropriate for the bootcount mechanism.

Signed-off-by: Vasileios Amoiridis <vasileios.amoiridis at cern.ch>
Reviewed-by: Heiko Schocher <hs at denx.de>
---
 MAINTAINERS                                  |  1 +
 arch/arm/mach-zynqmp/include/mach/hardware.h |  2 +
 drivers/bootcount/Kconfig                    |  7 +++
 drivers/bootcount/Makefile                   |  1 +
 drivers/bootcount/bootcount_zynqmp.c         | 47 ++++++++++++++++++++
 5 files changed, 58 insertions(+)
 create mode 100644 drivers/bootcount/bootcount_zynqmp.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 0399ed1dbf..bc27a514e8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -860,6 +860,7 @@ M:	Michal Simek <michal.simek at amd.com>
 S:	Maintained
 T:	git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
 F:	arch/arm/mach-zynqmp/
+F:	drivers/bootcount/bootcount_zynqmp.c
 F:	drivers/clk/clk_zynqmp.c
 F:	driver/firmware/firmware-zynqmp.c
 F:	drivers/fpga/zynqpl.c
diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h
index 49e449ebd6..3c372bd6dc 100644
--- a/arch/arm/mach-zynqmp/include/mach/hardware.h
+++ b/arch/arm/mach-zynqmp/include/mach/hardware.h
@@ -188,6 +188,8 @@ struct pmu_regs {
 	u32 gen_storage4; /* 0x40 */
 	u32 reserved1[1];
 	u32 gen_storage6; /* 0x48 */
+	u32 reserved2[3];
+	u32 pers_gen_storage2; /* 0x58 */
 };
 
 #define pmu_base ((struct pmu_regs *)ZYNQMP_PMU_BASEADDR)
diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
index fa6d8e7128..0080d2a165 100644
--- a/drivers/bootcount/Kconfig
+++ b/drivers/bootcount/Kconfig
@@ -164,6 +164,13 @@ config DM_BOOTCOUNT_SYSCON
 
 	  Accessing the backend is done using the regmap interface.
 
+config DM_BOOTCOUNT_ZYNQMP
+	bool "Support ZynqMP PMUFW as a backing store for bootcount"
+	depends on ARCH_ZYNQMP
+	help
+	  Enable support for the bootcount API by utilising the Persistent
+	  Global General Storage Register 2 of the PMU.
+
 endmenu
 
 endif
diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile
index 245f879633..0cf79e428d 100644
--- a/drivers/bootcount/Makefile
+++ b/drivers/bootcount/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_DM_BOOTCOUNT_I2C_EEPROM)	+= i2c-eeprom.o
 obj-$(CONFIG_DM_BOOTCOUNT_I2C)	+= bootcount_dm_i2c.o
 obj-$(CONFIG_DM_BOOTCOUNT_SPI_FLASH)	+= spi-flash.o
 obj-$(CONFIG_DM_BOOTCOUNT_SYSCON) += bootcount_syscon.o
+obj-$(CONFIG_DM_BOOTCOUNT_ZYNQMP)	+= bootcount_zynqmp.o
diff --git a/drivers/bootcount/bootcount_zynqmp.c b/drivers/bootcount/bootcount_zynqmp.c
new file mode 100644
index 0000000000..bc0984e2d2
--- /dev/null
+++ b/drivers/bootcount/bootcount_zynqmp.c
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+// SPDX-FileCopyrightText: 2024 CERN (home.cern)
+
+#include <bootcount.h>
+#include <dm.h>
+#include <stdio.h>
+#include <zynqmp_firmware.h>
+#include <asm/arch/hardware.h>
+#include <dm/platdata.h>
+
+static int bootcount_zynqmp_set(struct udevice *dev, const u32 val)
+{
+	int ret;
+
+	ret = zynqmp_mmio_write((ulong)&pmu_base->pers_gen_storage2, 0xFF, val);
+	if (ret)
+		pr_info("%s write fail\n", __func__);
+
+	return ret;
+}
+
+static int bootcount_zynqmp_get(struct udevice *dev, u32 *val)
+{
+	int ret;
+
+	*val = 0;
+	ret = zynqmp_mmio_read((ulong)&pmu_base->pers_gen_storage2, val);
+	if (ret)
+		pr_info("%s read fail\n", __func__);
+
+	return ret;
+}
+
+U_BOOT_DRVINFO(bootcount_zynqmp) = {
+	.name = "bootcount_zynqmp",
+};
+
+static const struct bootcount_ops bootcount_zynqmp_ops = {
+	.get = bootcount_zynqmp_get,
+	.set = bootcount_zynqmp_set,
+};
+
+U_BOOT_DRIVER(bootcount_zynqmp) = {
+	.name = "bootcount_zynqmp",
+	.id = UCLASS_BOOTCOUNT,
+	.ops = &bootcount_zynqmp_ops,
+};
-- 
2.34.1



More information about the U-Boot mailing list