[PATCH] arm64: zynqmp: Fix r5 mode for cpu release command

[Michal Simek]

On 11/4/24 13:27, Padmarao Begari wrote:
> The cpu release command for r5 mode (lockstep/split) argument
> accepts only string. But the zynqmp tcminit command accepts
> string or number for r5 mode (lockstep/split or 0/1) argument.
> To fix the r5 mode argument, the common argument (lockstep/split
> or 0/1) is used across different u-boot commands. Use the strcmp()
> instead of strncmp() to make uniform the r5 mode (lockstep/split
> or 0/1) for the zynqmp tcminit and cpu release command.
> 
> Signed-off-by: Padmarao Begari <padmarao.begari at amd.com>
> ---
>   arch/arm/mach-zynqmp/mp.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-zynqmp/mp.c b/arch/arm/mach-zynqmp/mp.c
> index 6e6da8008f..448bc53286 100644
> --- a/arch/arm/mach-zynqmp/mp.c
> +++ b/arch/arm/mach-zynqmp/mp.c
> @@ -352,7 +352,7 @@ int cpu_release(u32 nr, int argc, char *const argv[])
>   		 */
>   		flush_dcache_all();
>   
> -		if (!strncmp(argv[1], "lockstep", 8)) {
> +		if (!strcmp(argv[1], "lockstep") || !strcmp(argv[1], "0")) {
>   			if (nr != ZYNQMP_CORE_RPU0) {
>   				printf("Lockstep mode should run on ZYNQMP_CORE_RPU0\n");
>   				return 1;
> @@ -369,7 +369,7 @@ int cpu_release(u32 nr, int argc, char *const argv[])
>   			dcache_enable();
>   			set_r5_halt_mode(nr, RELEASE, LOCK);
>   			mark_r5_used(nr, LOCK);
> -		} else if (!strncmp(argv[1], "split", 5)) {
> +		} else if (!strcmp(argv[1], "split") || !strcmp(argv[1], "1")) {
>   			printf("R5 split mode\n");
>   			set_r5_reset(nr, SPLIT);
>   			set_r5_tcm_mode(SPLIT);

Applied.
M