[PATCH 1/2] xilinx: mbv: Place DTB by default to DDR location

[Begari, Padmarao]

> From: Simek, Michal <michal.simek at amd.com>
> Sent: Friday, November 1, 2024 3:20 PM
> To: u-boot at lists.denx.de; git at xilinx.com
> Cc: Leo Yu-Chi Liang <ycliang at andestech.com>; Begari, Padmarao
> <Padmarao.Begari at amd.com>; Tom Rini <trini at konsulko.com>
> Subject: [PATCH 1/2] xilinx: mbv: Place DTB by default to DDR location
> 
> DTB should be also placed to DDR. It should be the part of commit
> 9d688e6da5c9 ("riscv: mbv: Align DT with QEMU").
> 
> Signed-off-by: Michal Simek <michal.simek at amd.com>

Reviewed-by: Padmarao Begari <padmarao.begari at amd.com>

> ---
> 
>  board/xilinx/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig index
> c7df4ab5781a..0ff8440e6e06 100644
> --- a/board/xilinx/Kconfig
> +++ b/board/xilinx/Kconfig
> @@ -45,7 +45,7 @@ config XILINX_OF_BOARD_DTB_ADDR
>  	default 0x1000 if ARCH_VERSAL || ARCH_VERSAL_NET ||
> ARCH_VERSAL2
>  	default 0x8000 if MICROBLAZE
>  	default 0x100000 if ARCH_ZYNQ || ARCH_ZYNQMP
> -	default 0x23000000 if TARGET_XILINX_MBV
> +	default 0x83000000 if TARGET_XILINX_MBV
>  	depends on OF_BOARD || OF_SEPARATE
>  	help
>  	  Offset in the memory where the board configuration DTB is placed.
> --
> 2.43.0