[PATCH v1 17/22] siemens: capricorn: add HW version information to boot log

[Heiko Schocher]

Add the HW version read directly from EEPROM.

EEPROM chip data structure is now in a .h file common to draco
and capricorn.

Therefore move out the definitions in drace board to siemens
common place.

Signed-off-by: Alessandro Zini <alessandro.zini at siemens.com>
Signed-off-by: Heiko Schocher <hs at denx.de>
---

 board/siemens/capricorn/board.c | 24 ++++++++++++++++++
 board/siemens/common/board.h    | 44 +++++++++++++++++++++++++++++++++
 board/siemens/draco/board.h     | 10 ++------
 3 files changed, 70 insertions(+), 8 deletions(-)
 create mode 100644 board/siemens/common/board.h

diff --git a/board/siemens/capricorn/board.c b/board/siemens/capricorn/board.c
index 99681d68c3f..74856aaf8f6 100644
--- a/board/siemens/capricorn/board.c
+++ b/board/siemens/capricorn/board.c
@@ -26,6 +26,7 @@
 #include <asm/arch-imx8/clock.h>
 #endif
 #include <linux/delay.h>
+#include "../common/board.h"
 #include "../common/eeprom.h"
 #include "../common/factoryset.h"
 
@@ -282,6 +283,29 @@ int checkboard(void)
 
 int board_init(void)
 {
+#ifndef CONFIG_XPL_BUILD
+	struct chip_data eeprom_data = {};
+	int ret;
+
+	ret = siemens_ee_setup();
+	if (ret) {
+		printf("'siemens_ee_setup' failed, ret: %d\n", ret);
+		goto skip;
+	}
+
+	ret = siemens_ee_read_data(SIEMENS_EE_ADDR_CHIP,
+				   (uchar *)&eeprom_data,
+				   sizeof(eeprom_data));
+	if (ret) {
+		printf("'siemens_ee_read_data' failed, ret: %d\n", ret);
+		goto skip;
+	}
+
+	printf("HW Version: %s\n", eeprom_data.shwver);
+
+skip:
+#endif
+
 	setup_fec();
 	return 0;
 }
diff --git a/board/siemens/common/board.h b/board/siemens/common/board.h
new file mode 100644
index 00000000000..db34bc78711
--- /dev/null
+++ b/board/siemens/common/board.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Common board functions for siemens based boards
+ * (C) Copyright 2022 Siemens Schweiz AG
+ */
+
+#ifndef __COMMON_BOARD_H
+#define __COMMON_BOARD_H
+
+/*
+ * Chip data
+ * Offset in EEPROM: 0x120 - 0x14F
+ *
+ * -----------------------------------------------------------------------------------
+ * | Address range |                          Content                                |
+ * -----------------------------------------------------------------------------------
+ * | 0x120 - 0x123 |  Magic Number - 0x43484950 (4 byte)                             |
+ * -----------------------------------------------------------------------------------
+ * | 0x124 - 0x133 |  Device Nomenclature (15 + 1 byte)                              |
+ * -----------------------------------------------------------------------------------
+ * | 0x134 - 0x13A |  HW Version of the form "v00.00" (6 + 1 byte)                 |
+ * |               |   - First 2 digits: Layout revision (starting from 1)           |
+ * |               |   - Last 2 digits: Assembly variant revision (starting from 1)  |
+ * -----------------------------------------------------------------------------------
+ * | 0x13B - 0x13F |  Flash Size in Gibit (4 + 1 byte)                               |
+ * -----------------------------------------------------------------------------------
+ * | 0x140 - 0x144 |  Ram Size in Gibit (4 + 1 byte)                                 |
+ * -----------------------------------------------------------------------------------
+ * | 0x145 - 0x14F |  Sequence number, equals DMC-code (10 + 1 byte) [OBSOLETE]      |
+ * -----------------------------------------------------------------------------------
+ */
+
+#define MAGIC_CHIP		0x50494843
+#define EEPROM_CHIP_OFFSET	0x120
+
+struct chip_data {
+	unsigned int magic;
+	char sdevname[16];
+	char shwver[7];
+	char flash_size[5];
+	char ram_size[5];
+};
+
+#endif /* __COMMON_BOARD_H */
diff --git a/board/siemens/draco/board.h b/board/siemens/draco/board.h
index 935f340a8f2..77f35a6ab7b 100644
--- a/board/siemens/draco/board.h
+++ b/board/siemens/draco/board.h
@@ -11,6 +11,8 @@
 #ifndef _BOARD_DRACO_H_
 #define _BOARD_DRACO_H_
 
+#include "../common/board.h"
+
 #define PARGS(x)	#x , /* Parameter Name */ \
 			settings.ddr3.x, /* EEPROM Value */ \
 			ddr3_default.x, /* Default Value */ \
@@ -18,8 +20,6 @@
 
 #define PRINTARGS(y)	printf("%-20s, %8x, %8x, %4d\n", PARGS(y))
 
-#define MAGIC_CHIP	0x50494843
-
 /* Automatic generated definition */
 /* Wed, 16 Apr 2014 16:50:41 +0200 */
 /* From file: draco/ddr3-data-universal-default at 303MHz-i0-ES3.txt */
@@ -43,12 +43,6 @@ struct ddr3_data {
 	char manu_marking[32];			/* "default \0" */
 };
 
-struct chip_data {
-	unsigned int  magic;
-	char sdevname[16];
-	char shwver[7];
-};
-
 struct draco_baseboard_id {
 	struct ddr3_data ddr3;
 	struct chip_data chip;
-- 
2.20.1