[Upstream] [PATCH v2 2/6] phycore-imx8mp_defconfig: add optee load address

[Wadim Egorov]

Am 08.11.24 um 13:55 schrieb Yannic Moog:
> Hi Wadim,
> 
> On Thu, 2024-11-07 at 09:52 +0100, Wadim Egorov wrote:
>> Hi Yannic,
>>
>> Am 07.11.24 um 09:23 schrieb Yannic Moog:
>>> The phyBOARD-Pollux expects 0x56000000 address to load optee.
>>
>> You are already defining a default for IMX8M_OPTEE_LOAD_ADDR in the
>> mach-imx Kconf. You can drop the patches touching the defconfigs.
> 
> I would like to keep these patches as the default value is "only" there to get a functioning build.
> To me it would seem there has been no thought put in to what the actual correct value would be if
> left as default. Does that make sense?

Yes, this makes sense. Up to you, it was just a hint.

Well, it will become de facto standard if you put a default value into 
the Kconfig regardless if there has been no thoughts on the best 
location for it. Other boards will probably just follow and reuse it anyway.


> 
> Yannic
> 
>>
>> Regards,
>> Wadim
>>
>>>
>>> Signed-off-by: Yannic Moog <y.moog at phytec.de>
>>> ---
>>>    configs/phycore-imx8mp_defconfig | 1 +
>>>    1 file changed, 1 insertion(+)
>>>
>>> diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
>>> index 1240c7fcbd0..910109afd80 100644
>>> --- a/configs/phycore-imx8mp_defconfig
>>> +++ b/configs/phycore-imx8mp_defconfig
>>> @@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_LEN=0x2000000
>>>    CONFIG_SPL_GPIO=y
>>>    CONFIG_SPL_LIBCOMMON_SUPPORT=y
>>>    CONFIG_SPL_LIBGENERIC_SUPPORT=y
>>> +CONFIG_IMX8M_OPTEE_LOAD_ADDR=0x56000000
>>>    CONFIG_PHYTEC_SOM_DETECTION=y
>>>    CONFIG_SF_DEFAULT_SPEED=80000000
>>>    CONFIG_ENV_SIZE=0x10000
>>>
>>
>