[Binman] Question regarding SPL symbol offsets generation

[Adam Ford]

On Fri, Nov 8, 2024 at 8:16 PM Fabio Estevam <festevam at gmail.com> wrote:
>
> On Fri, Nov 8, 2024 at 11:12 PM Adam Ford <aford173 at gmail.com> wrote:
>
> > I think I have a fix for the Nano.  I want to get my hands on a Mini
> > again to test it.  My solution creates two files, a flash.bin for
> > booting SD/eMMC and a second file which adds the FSPI header at 0x400
> > with the whole standard image starting at 0x1000.  I have been able to
> > boot both the SD and eMMC's with one config option which can allow me
> > to remove the FSPI config file and consolidate both configs into one.
> > Once I can verify it works on Mini, I'll post my proposed fix.
>
> Thanks, Adam. Appreciate your effort!

No problem. I managed to get my hands on a Mini, and I just sent a
patch series which restored FSPI booting on both the im8mn-beacon and
imx8mm-beacon boards.

If/when I get some more time, I might try to port the stuff I did for
Nano to the Plus since I think the boot ROM is similar between them.

adam