[PATCH v1 13/22] siemens: configs/capricorn_cxg3_defconfig: updates

[Sverdlin, Alexander]

On Fri, 2024-11-08 at 06:21 +0100, Heiko Schocher wrote:
> make savedefconfig and add SCU_WDT and fix environment
> offsets, as since silicium c0 the boot container takes place
> at offset 0 and so the u-boot-env must be moved outside of
> the boot container area.
> 
> Signed-off-by: Heiko Schocher <hs at denx.de>

Reviewed-by: Alexander Sverdlin <alexander.sverdlin at siemens.com>

> ---
> 
>  configs/capricorn_cxg3_defconfig | 16 +++++++++++-----
>  1 file changed, 11 insertions(+), 5 deletions(-)
> 
> diff --git a/configs/capricorn_cxg3_defconfig b/configs/capricorn_cxg3_defconfig
> index ce820e2c54f..4b92dc1f943 100644
> --- a/configs/capricorn_cxg3_defconfig
> +++ b/configs/capricorn_cxg3_defconfig
> @@ -10,7 +10,7 @@ CONFIG_NR_DRAM_BANKS=3
>  CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>  CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
>  CONFIG_ENV_SIZE=0x2000
> -CONFIG_ENV_OFFSET=0x0
> +CONFIG_ENV_OFFSET=0x200000
>  CONFIG_DM_GPIO=y
>  CONFIG_DEFAULT_DEVICE_TREE="imx8-capricorn-cxg3"
>  CONFIG_SPL_TEXT_BASE=0x100000
> @@ -25,7 +25,7 @@ CONFIG_SPL_BSS_MAX_SIZE=0x1000
>  CONFIG_SYS_BOOTM_LEN=0x800000
>  CONFIG_SYS_LOAD_ADDR=0x80280000
>  CONFIG_SPL=y
> -CONFIG_ENV_OFFSET_REDUND=0x2000
> +CONFIG_ENV_OFFSET_REDUND=0x202000
>  CONFIG_IDENT_STRING=" ##v01.06"
>  CONFIG_REMAKE_ELF=y
>  # CONFIG_EFI_LOADER is not set
> @@ -55,9 +55,10 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
>  CONFIG_SPL_SYS_MALLOC=y
>  CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
>  CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000
> -CONFIG_SPL_SYS_MALLOC_SIZE=0x3000
> +CONFIG_SPL_SYS_MALLOC_SIZE=0x4000
>  CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
> -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
> +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
> +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
>  CONFIG_SPL_POWER_DOMAIN=y
>  CONFIG_SPL_WATCHDOG=y
>  CONFIG_HUSH_PARSER=y
> @@ -112,10 +113,13 @@ CONFIG_PHYLIB=y
>  CONFIG_MV88E61XX_SWITCH=y
>  CONFIG_MV88E61XX_CPU_PORT=5
>  CONFIG_MV88E61XX_PHY_PORTS=0x7
> +CONFIG_DM_ETH_PHY=y
>  CONFIG_FEC_MXC_SHARE_MDIO=y
>  CONFIG_FEC_MXC_MDIO_BASE=0x5B050000
>  CONFIG_FEC_MXC=y
>  CONFIG_MII=y
> +CONFIG_PHY=y
> +CONFIG_NOP_PHY=y
>  CONFIG_PINCTRL=y
>  CONFIG_SPL_PINCTRL=y
>  CONFIG_PINCTRL_IMX8=y
> @@ -129,5 +133,7 @@ CONFIG_DM_SERIAL=y
>  CONFIG_FSL_LPUART=y
>  CONFIG_DM_THERMAL=y
>  CONFIG_IMX_SCU_THERMAL=y
> -# CONFIG_SPL_WDT is not set
> +# CONFIG_WATCHDOG is not set
> +CONFIG_WDT=y
> +CONFIG_WDT_IMX_SCU=y
>  CONFIG_SPL_TINY_MEMSET=y

-- 
Alexander Sverdlin
Siemens AG
www.siemens.com