[PATCH v11 7/7] arm64: zynqmp: Update the usb5744 hub node as per binding
Venkatesh Yadav Abbarapu
venkatesh.abbarapu at amd.com
Tue Nov 12 06:07:40 CET 2024
Updating the usb5744 hub node as per the latest upstream DT binding
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
tree/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml?h=v6.8.8
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu at amd.com>
Acked-by: Michal Simek <michal.simek at amd.com>
---
arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 48 ++++++++++++++++++++++++++
arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 48 ++++++++++++++++++++++++++
arch/arm/dts/zynqmp-sck-kv-g-revA.dtso | 18 ++++++++++
arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 25 +++++++++++++-
4 files changed, 138 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
index 6349a0e108..e40840acb8 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
@@ -105,11 +105,19 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+ hub_1: usb-hub at 2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
};
usbhub_i2c1: i2c at 1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+ hub_2: usb-hub at 2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
};
/* Bus 2/3 are not connected */
};
@@ -164,6 +172,26 @@
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub at 1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ i2c-bus = <&hub_1>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub at 2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ i2c-bus = <&hub_1>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
};
&usb1 { /* mio64 - mio75 */
@@ -188,6 +216,26 @@
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub1_2_0: hub at 1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub1_3_0>;
+ i2c-bus = <&hub_2>;
+ reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub1_3_0: hub at 2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub1_2_0>;
+ i2c-bus = <&hub_2>;
+ reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+ };
};
&gem0 { /* mdio mio50/51 */
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
index b0d737d3ca..ce1ad2b765 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
@@ -117,11 +117,19 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+ hub_1: usb-hub at 2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
};
usbhub_i2c1: i2c at 1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+ hub_2: usb-hub at 2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
};
/* Bus 2/3 are not connected */
};
@@ -184,6 +192,26 @@
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub at 1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ i2c-bus = <&hub_1>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub at 2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ i2c-bus = <&hub_1>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
};
&usb1 { /* mio64 - mio75 */
@@ -209,6 +237,26 @@
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub1_2_0: hub at 1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub1_3_0>;
+ i2c-bus = <&hub_2>;
+ reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub1_3_0: hub at 2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub1_2_0>;
+ i2c-bus = <&hub_2>;
+ reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+ };
};
&gem0 { /* mdio mio50/51 */
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
index 561b546e37..0ef0357bd2 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
@@ -142,6 +142,24 @@
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub at 1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub at 2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
};
&sdhci1 { /* on CC with tuned parameters */
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
index 64683e0ccb..92d8851eb8 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
@@ -92,7 +92,10 @@
label = "ina260-u14";
reg = <0x40>;
};
- /* u43 - 0x2d - USB hub */
+ hub: usb-hub at 2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
};
@@ -146,6 +149,26 @@
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub at 1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ i2c-bus = <&hub>;
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub at 2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ i2c-bus = <&hub>;
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
};
&sdhci1 { /* on CC with tuned parameters */
--
2.17.1
More information about the U-Boot
mailing list