[PATCH v2 2/3] board: phytec: imx93: Add eeprom-based hardware introspection
Yannic Moog
Y.Moog at phytec.de
Thu Nov 14 07:30:00 CET 2024
Hi Christoph,
On Wed, 2024-11-13 at 17:00 +0100, Christoph Stoidner wrote:
> The phyCORE-i.MX 93 is available in various variants. Relevant variant
> options for the spl/u-boot are:
> - with or without HS400 support for the eMMC
> - with 1GB ram chip, or 2GB ram chip
>
> The phyCORE's eeprom contains all information about the existing variant
> options. Add evaluation of the eeprom data to the spl/u-boot to
> enable/disable HS400 and to select the appropriate ram configuration at
> startup.
>
> Signed-off-by: Christoph Stoidner <c.stoidner at phytec.de>
> ---
> Cc: Mathieu Othacehe <m.othacehe at gmail.com>
> Cc: Christoph Stoidner <c.stoidner at phytec.de>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: "NXP i.MX U-Boot Team" <uboot-imx at nxp.com>
> Cc: Tom Rini <trini at konsulko.com>
> Cc: Yannic Moog <y.moog at phytec.de>
> Cc: Primoz Fiser <primoz.fiser at norik.com>
> Cc: Andrej Picej <andrej.picej at norik.com>
> Cc: Wadim Egorov <w.egorov at phytec.de>
> ---
> Changes in v2:
> - encapsulate handling of feature flag VOLTAGE into own function
> - move definition of enum phytec_imx93_ddr_eeprom_code into header file
>
> arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi | 19 +++
> arch/arm/mach-imx/imx9/Kconfig | 2 +
> arch/arm/mach-imx/imx9/soc.c | 2 +-
> board/phytec/common/Kconfig | 8 ++
> board/phytec/common/Makefile | 1 +
> board/phytec/common/imx93_som_detection.c | 111 ++++++++++++++++++
> board/phytec/common/imx93_som_detection.h | 51 ++++++++
> board/phytec/phycore_imx93/Kconfig | 28 +++++
> board/phytec/phycore_imx93/MAINTAINERS | 5 +-
> board/phytec/phycore_imx93/phycore-imx93.c | 51 ++++++++
> board/phytec/phycore_imx93/spl.c | 48 ++++++++
> 11 files changed, 324 insertions(+), 2 deletions(-)
> create mode 100644 board/phytec/common/imx93_som_detection.c
> create mode 100644 board/phytec/common/imx93_som_detection.h
>
> diff --git a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi b/arch/arm/dts/imx93-phyboard-segin-u-
> boot.dtsi
> index 6897c91f4d..25c778bb07 100644
> --- a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
> +++ b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
> @@ -305,4 +305,23 @@
> };
> };
> };
> +
> + eeprom at 50 {
> + bootph-pre-ram;
> + bootph-some-ram;
> + compatible = "atmel,24c32";
> + reg = <0x50>;
> + pagesize = <32>;
> + vcc-supply = <&buck4>;
> + };
> +
> + eepromid at 58 {
> + bootph-pre-ram;
> + bootph-some-ram;
> + compatible = "atmel,24c32";
> + pagesize = <32>;
> + reg = <0x58>;
> + size = <32>;
> + vcc-supply = <&buck4>;
> + };
> };
> diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-imx/imx9/Kconfig
> index 5c1054138f..2465e31d73 100644
> --- a/arch/arm/mach-imx/imx9/Kconfig
> +++ b/arch/arm/mach-imx/imx9/Kconfig
> @@ -45,6 +45,8 @@ config TARGET_PHYCORE_IMX93
> bool "phycore_imx93"
> select IMX93
> select IMX9_LPDDR4X
> + select OF_BOARD_FIXUP
> + select OF_BOARD_SETUP
>
> endchoice
>
> diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c
> index 7c28fa39e1..237354f507 100644
> --- a/arch/arm/mach-imx/imx9/soc.c
> +++ b/arch/arm/mach-imx/imx9/soc.c
> @@ -628,7 +628,7 @@ static int low_drive_freq_update(void *blob)
> return 0;
> }
>
> -#ifdef CONFIG_OF_BOARD_FIXUP
> +#if defined(CONFIG_OF_BOARD_FIXUP) && !defined(CONFIG_TARGET_PHYCORE_IMX93)
Why do you do this?
It doesn't look right to me. When you have to modify soc.c to add your own board config, then either
there is a problem with the file and it should be fixed properly here or there is a problem with
your board and it should be fixed in your board code.
> #ifndef CONFIG_XPL_BUILD
> int board_fix_fdt(void *fdt)
> {
> diff --git a/board/phytec/common/Kconfig b/board/phytec/common/Kconfig
> index f394ace786..bc5511707a 100644
> --- a/board/phytec/common/Kconfig
> +++ b/board/phytec/common/Kconfig
> @@ -19,6 +19,14 @@ config PHYTEC_IMX8M_SOM_DETECTION
> Support of I2C EEPROM based SoM detection. Supported
> for PHYTEC i.MX8MM/i.MX8MP boards
>
> +config PHYTEC_IMX93_SOM_DETECTION
> + bool "Support SoM detection for i.MX93 PHYTEC platforms"
> + depends on ARCH_IMX9 && PHYTEC_SOM_DETECTION
> + default y
> + help
> + Support of I2C EEPROM based SoM detection. Supported
> + for PHYTEC i.MX93 based boards
> +
> config PHYTEC_AM62_SOM_DETECTION
> bool "Support SoM detection for AM62x PHYTEC platforms"
> depends on (TARGET_PHYCORE_AM62X_A53 || TARGET_PHYCORE_AM62X_R5) && \
> diff --git a/board/phytec/common/Makefile b/board/phytec/common/Makefile
> index cd78f7686f..8126f7356e 100644
> --- a/board/phytec/common/Makefile
> +++ b/board/phytec/common/Makefile
> @@ -10,3 +10,4 @@ endif
> obj-y += phytec_som_detection.o phytec_som_detection_blocks.o
> obj-$(CONFIG_ARCH_K3) += am6_som_detection.o k3/
> obj-$(CONFIG_ARCH_IMX8M) += imx8m_som_detection.o
> +obj-$(CONFIG_ARCH_IMX9) += imx93_som_detection.o
> diff --git a/board/phytec/common/imx93_som_detection.c b/board/phytec/common/imx93_som_detection.c
> new file mode 100644
> index 0000000000..a28cdf6b51
> --- /dev/null
> +++ b/board/phytec/common/imx93_som_detection.c
> @@ -0,0 +1,111 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (C) 2024 PHYTEC Messtechnik GmbH
> + * Author: Primoz Fiser <primoz.fiser at norik.com>
> + */
> +
> +#include <asm/arch/sys_proto.h>
> +#include <dm/device.h>
> +#include <dm/uclass.h>
> +#include <i2c.h>
> +#include <u-boot/crc.h>
> +
> +#include "imx93_som_detection.h"
> +
> +extern struct phytec_eeprom_data eeprom_data;
> +
> +#if IS_ENABLED(CONFIG_PHYTEC_IMX93_SOM_DETECTION)
> +
> +/* Check if the SoM is actually one of the following products:
> + * - i.MX93
> + *
> + * Returns 0 in case it's a known SoM. Otherwise, returns 1.
> + */
> +u8 __maybe_unused phytec_imx93_detect(struct phytec_eeprom_data *data)
> +{
> + u8 som;
> +
> + if (!data)
> + data = &eeprom_data;
> +
> + /* Early API revisions are not supported */
> + if (!data->valid || data->payload.api_rev < PHYTEC_API_REV2)
> + return 1;
> +
> + som = data->payload.data.data_api2.som_no;
> + debug("%s: som id: %u\n", __func__, som);
> +
> + if (som == PHYTEC_IMX93_SOM && is_imx93())
> + return 0;
> +
> + pr_err("%s: SoM ID does not match. Wrong EEPROM data?\n", __func__);
> + return 1;
> +}
> +
> +/*
> + * Filter PHYTEC i.MX93 SoM options by option index
> + *
> + * Returns:
> + * - option value
> + * - PHYTEC_EEPROM_INVAL when the data is invalid
> + *
> + */
> +u8 __maybe_unused phytec_imx93_get_opt(struct phytec_eeprom_data *data,
> + enum phytec_imx93_option_index idx)
> +{
> + char *opt;
> + u8 opt_id;
> +
> + if (!data)
> + data = &eeprom_data;
> +
> + if (!data->valid || data->payload.api_rev < PHYTEC_API_REV2)
> + return PHYTEC_EEPROM_INVAL;
> +
> + opt = phytec_get_opt(data);
> + if (opt)
> + opt_id = PHYTEC_GET_OPTION(opt[idx]);
> + else
> + opt_id = PHYTEC_EEPROM_INVAL;
> +
> + debug("%s: opt[%d] id: %u\n", __func__, idx, opt_id);
> + return opt_id;
> +}
> +
> +/*
> + * Filter PHYTEC i.MX93 SoM voltage
> + *
> + * Returns:
> + * - PHYTEC_IMX93_VOLTAGE_1V8 or PHYTEC_IMX93_VOLTAGE_3V8
> + * - PHYTEC_EEPROM_INVAL when the data is invalid
> + *
> + */
> +enum phytec_imx93_voltage __maybe_unused phytec_imx93_get_voltage(struct phytec_eeprom_data
> *data)
> +{
> + u8 option = phytec_imx93_get_opt(data, PHYTEC_IMX93_OPT_FEAT);
> +
> + if (option == PHYTEC_EEPROM_INVAL)
> + return PHYTEC_IMX93_VOLTAGE_INVALID;
> + return (option & 0x01) ? PHYTEC_IMX93_VOLTAGE_1V8 : PHYTEC_IMX93_VOLTAGE_3V3;
> +}
> +
> +#else
> +
> +inline u8 __maybe_unused phytec_imx93_detect(struct phytec_eeprom_data *data)
> +{
> + return 1;
> +}
> +
> +inline u8 __maybe_unused phytec_imx93_get_opt(struct phytec_eeprom_data *data,
> + enum phytec_imx93_option_index idx)
> +{
> + return PHYTEC_EEPROM_INVAL;
> +}
> +
> +inline enum phytec_imx93_voltage __maybe_unused phytec_imx93_get_voltage
> + (struct phytec_eeprom_data *data)
> +{
> + return PHYTEC_EEPROM_INVAL;
> +}
> +
> +#endif /* IS_ENABLED(CONFIG_PHYTEC_IMX93_SOM_DETECTION) */
> diff --git a/board/phytec/common/imx93_som_detection.h b/board/phytec/common/imx93_som_detection.h
> new file mode 100644
> index 0000000000..6d3d9283d8
> --- /dev/null
> +++ b/board/phytec/common/imx93_som_detection.h
> @@ -0,0 +1,51 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright (C) 2024 PHYTEC Messtechnik GmbH
> + * Author: Primoz Fiser <primoz.fiser at norik.com>
> + */
> +
> +#ifndef _PHYTEC_IMX93_SOM_DETECTION_H
> +#define _PHYTEC_IMX93_SOM_DETECTION_H
> +
> +#include "phytec_som_detection.h"
> +
> +#define PHYTEC_IMX93_SOM 77
> +
> +enum phytec_imx93_option_index {
> + PHYTEC_IMX93_OPT_DDR = 0,
> + PHYTEC_IMX93_OPT_EMMC,
> + PHYTEC_IMX93_OPT_CPU,
> + PHYTEC_IMX93_OPT_FREQ,
> + PHYTEC_IMX93_OPT_NPU,
> + PHYTEC_IMX93_OPT_DISP,
> + PHYTEC_IMX93_OPT_ETH,
> + PHYTEC_IMX93_OPT_FEAT,
> + PHYTEC_IMX93_OPT_TEMP,
> + PHYTEC_IMX93_OPT_BOOT,
> + PHYTEC_IMX93_OPT_LED,
> + PHYTEC_IMX93_OPT_EEPROM,
> +};
> +
> +enum phytec_imx93_voltage {
> + PHYTEC_IMX93_VOLTAGE_INVALID = PHYTEC_EEPROM_INVAL,
> + PHYTEC_IMX93_VOLTAGE_3V3 = 0,
> + PHYTEC_IMX93_VOLTAGE_1V8,
> +};
> +
> +enum phytec_imx93_ddr_eeprom_code {
> + PHYTEC_IMX93_DDR_INVALID = PHYTEC_EEPROM_INVAL,
> + PHYTEC_IMX93_LPDDR4X_512MB = 0,
> + PHYTEC_IMX93_LPDDR4X_1GB = 1,
> + PHYTEC_IMX93_LPDDR4X_2GB = 2,
> + PHYTEC_IMX93_LPDDR4_512MB = 3,
> + PHYTEC_IMX93_LPDDR4_1GB = 4,
> + PHYTEC_IMX93_LPDDR4_2GB = 5,
> +};
This is inconsistent within enums. For the ddr, you set each value explicitly, but for the others
you don't. Please choose one style.
Yannic
> [...]
>
More information about the U-Boot
mailing list