[PATCH v2 3/3] board: phytec: imx93: Add phyCORE-i.MX 93 support for all SOM variants

[Primoz Fiser]

Hi Christoph,

this patch doesn't apply anymore on latest master.

Can you please rebase for v3?

Then I can test it on the board.

Thanks,
BR,
Primoz

On 13. 11. 24 17:00, Christoph Stoidner wrote:
> The phyCORE-i.MX 93 is available in various variants (e.g. different ram
> sizes, eMMC HS400 yes/no). Enable hardware introspection for the
> imx93-phyboard-segin_defconfig, so that during startup the SOM module
> variant can be detected, and the hardware can be configured accordingly.
> The resulting SPL and u-boot binary shall able to boot each
> phyCORE-i.MX 93 module variant on each carrier board. Finally rename
> imx93-phyboard-segin_defconfig to imx93-phycore_defconfig, to highlight
> its SOM scope.
> 
> Signed-off-by: Christoph Stoidner <c.stoidner at phytec.de>
> ---
> Cc: Mathieu Othacehe <m.othacehe at gmail.com>
> Cc: Christoph Stoidner <c.stoidner at phytec.de>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: "NXP i.MX U-Boot Team" <uboot-imx at nxp.com>
> Cc: Tom Rini <trini at konsulko.com>
> Cc: Yannic Moog <y.moog at phytec.de>
> Cc: Primoz Fiser <primoz.fiser at norik.com>
> Cc: Andrej Picej <andrej.picej at norik.com>
> Cc: Wadim Egorov <w.egorov at phytec.de>
> ---
> Changes in v2:
> - just rename imx93-phyboard-segin_defconfig and add needed CONFIGs,
>   instead of creating an entirely new second defconfig
> - remove wrong comment from imx93-phyboard-segin-u-boot.dtsi
> - improve commit message
> 
>  arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi               | 6 ++++--
>  board/phytec/phycore_imx93/MAINTAINERS                      | 2 +-
>  ...x93-phyboard-segin_defconfig => imx93-phycore_defconfig} | 4 +++-
>  3 files changed, 8 insertions(+), 4 deletions(-)
>  rename configs/{imx93-phyboard-segin_defconfig => imx93-phycore_defconfig} (98%)
> 
> diff --git a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
> index 25c778bb07..2245461032 100644
> --- a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
> +++ b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
> @@ -2,15 +2,17 @@
>  /*
>   * Copyright (C) 2023 PHYTEC Messtechnik GmbH
>   * Christoph Stoidner <c.stoidner at phytec.de>
> + * Copyright (C) 2024 PHYTEC Messtechnik GmbH
>   *
>   * Product homepage:
> - * phyBOARD-Segin carrier board is reused for the i.MX93 design.
> - * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/
> +   https://www.phytec.de/produkte/system-on-modules/phycore-imx-91-93/
>   */
>  
>  #include "imx93-u-boot.dtsi"
>  
>  / {
> +	model = "PHYTEC phyCORE-i.MX93";
> +
>  	wdt-reboot {
>  		compatible = "wdt-reboot";
>  		wdt = <&wdog3>;
> diff --git a/board/phytec/phycore_imx93/MAINTAINERS b/board/phytec/phycore_imx93/MAINTAINERS
> index cea817ffdc..718f89a084 100644
> --- a/board/phytec/phycore_imx93/MAINTAINERS
> +++ b/board/phytec/phycore_imx93/MAINTAINERS
> @@ -9,5 +9,5 @@ F:      arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
>  F:      board/phytec/phycore_imx93/
>  F:      board/phytec/common/imx93_som_detection.c
>  F:      board/phytec/common/imx93_som_detection.h
> -F:      configs/imx93-phyboard-segin_defconfig
> +F:      configs/imx93-phycore_defconfig
>  F:      include/configs/phycore_imx93.h
> diff --git a/configs/imx93-phyboard-segin_defconfig b/configs/imx93-phycore_defconfig
> similarity index 98%
> rename from configs/imx93-phyboard-segin_defconfig
> rename to configs/imx93-phycore_defconfig
> index 18a4087e4b..cf9800118a 100644
> --- a/configs/imx93-phyboard-segin_defconfig
> +++ b/configs/imx93-phycore_defconfig
> @@ -6,13 +6,13 @@ CONFIG_SYS_MALLOC_F_LEN=0x20000
>  CONFIG_SPL_LIBCOMMON_SUPPORT=y
>  CONFIG_SPL_LIBGENERIC_SUPPORT=y
>  CONFIG_NR_DRAM_BANKS=2
> +CONFIG_PHYTEC_SOM_DETECTION=y
>  CONFIG_ENV_SOURCE_FILE="phycore_imx93"
>  CONFIG_ENV_SIZE=0x10000
>  CONFIG_ENV_OFFSET=0x700000
>  CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
>  CONFIG_DM_GPIO=y
>  CONFIG_DEFAULT_DEVICE_TREE="imx93-phyboard-segin"
> -CONFIG_SPL_TEXT_BASE=0x2049A000
>  CONFIG_AHAB_BOOT=y
>  CONFIG_TARGET_PHYCORE_IMX93=y
>  CONFIG_OF_LIBFDT_OVERLAY=y
> @@ -20,6 +20,7 @@ CONFIG_SYS_MONITOR_LEN=524288
>  CONFIG_SPL_SERIAL=y
>  CONFIG_SPL_DRIVERS_MISC=y
>  CONFIG_SPL_STACK=0x20519dd0
> +CONFIG_SPL_TEXT_BASE=0x2049A000
>  CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
>  CONFIG_SPL_BSS_START_ADDR=0x2051a000
>  CONFIG_SPL_BSS_MAX_SIZE=0x2000
> @@ -31,6 +32,7 @@ CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
>  CONFIG_SYS_MEMTEST_START=0x80000000
>  CONFIG_SYS_MEMTEST_END=0x90000000
>  CONFIG_REMAKE_ELF=y
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
>  CONFIG_DISTRO_DEFAULTS=y
>  CONFIG_OF_SYSTEM_SETUP=y
>  CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"

-- 
Primoz Fiser                    | phone: +386-41-390-545
<tel:+386-41-390-545> |
---------------------------------------------------------|
Norik systems d.o.o.            | https://www.norik.com
<https://www.norik.com>  |
Your embedded software partner  | email: info at norik.com
<mailto:info at norik.com> |
Slovenia, EU                    | phone: +386-41-540-545
<tel:+386-41-540-545> |