[PATCH v3 0/2] riscv: spacemit: add support for bananapi-f3

[Huan Zhou]

On Thu, Nov 14, 2024 at 09:24:32PM +0800, Yixun Lan wrote:
> Hi Huan:
> 
> On 01:21 Thu 14 Nov     , Huan Zhou wrote:
> > Banana Pi F3 board is a industrial grade RISC-V development board, it
> > design with SpacemiT K1 8 core RISC-V chip, CPU integrates 2.0 TOPs AI
> > computing power. 4G DDR and 16G eMMC onboard. 2x GbE Ethernet port, 4x USB
> > 3.0 and PCIe for M.2 interface, support HDMI and Dual MIPI-CSI Camera.
> > 
> > This patch introduces fundamental support for the Banana Pi F3 board,
> > encompassing UART, CPU, and PLIC support. This ensures that U-Boot can
> > operate in serial console mode.
> > 
> > Changes in v3:
> > - Add memory node for dts
> > - Add base commit
> > - Add ft_board_setup function for kernel memory init
> > - Change license to GPL-2.0-or-later
> > - Clear redifinition warning while building in UART_IIR_ID
> > - Change underscore to dash in bananapi*f3
> > - Update maintainer
> > - Use default prompt
> > - link to v2 https://lore.kernel.org/u-boot/20240718043329.1500-1-seashell11234455@gmail.com/
> > 
> although you're taking over this patch, the "Changes in v2" log should be preserved
> better also add the "link to v1" URL
ok, will be added in next version
> 
> 
> > Signed-off-by: Huan Zhou <pericycle.cc at gmail.com>
> > Signed-off-by: Kongyang Liu <seashell11234455 at gmail.com>
> > ---
> > Kongyang Liu (2):
> >       riscv: spacemit: bananapi_f3: initial support added
> >       doc: spacemit: bananapi_f3: document Banana Pi F3 board
> > 
> >  arch/riscv/Kconfig                     |   5 +
> >  arch/riscv/cpu/k1/Kconfig              |  18 ++
> >  arch/riscv/cpu/k1/Makefile             |   6 +
> >  arch/riscv/cpu/k1/cpu.c                |   9 +
> >  arch/riscv/cpu/k1/dram.c               |  54 ++++
> >  arch/riscv/dts/Makefile                |   1 +
> >  arch/riscv/dts/k1-bananapi-f3.dts      |  25 ++
> >  arch/riscv/dts/k1.dtsi                 | 459 +++++++++++++++++++++++++++++++++
> >  board/spacemit/bananapi-f3/Kconfig     |  25 ++
> >  board/spacemit/bananapi-f3/MAINTAINERS |   7 +
> >  board/spacemit/bananapi-f3/Makefile    |   5 +
> >  board/spacemit/bananapi-f3/board.c     |   9 +
> >  configs/bananapi-f3_defconfig          |  20 ++
> >  doc/board/index.rst                    |   1 +
> >  doc/board/spacemit/bananapi-f3.rst     |  78 ++++++
> >  doc/board/spacemit/index.rst           |   8 +
> >  include/configs/bananapi-f3.h          |  13 +
> >  17 files changed, 743 insertions(+)
> > ---
> > base-commit: 40c45a57974bdb09fffa31dde65ddf69e5de53eb
> > change-id: 20241112-pickup-bpif3-245ab208b9a4
> > 
> > Best regards,
> > -- 
> > Huan Zhou <pericycle.cc at gmail.com>
> > 
> 
> -- 
> Yixun Lan (dlan)
> Gentoo Linux Developer
> GPG Key ID AABEFD55