[PATCH 0/2] clock: add support for X1E80100 Global Clock Controller

[Neil Armstrong]

On 18/11/2024 15:59, Caleb Connolly wrote:
> Hi Neil,
> 
> On 11/18/24 15:41, Neil Armstrong wrote:
>> Add support for GCC in X1E80100, and enable it in qcom_defconfig
> 
> Thanks for sending this!
> 
> In my testing so far on the Yoga Slim 7x UART doesn't seem to work correctly unless I skip the UART init sequence, and in that case on Tx works.
> 
> Seeing as it works on the CRD, I'm not sure what the cause is here...

Could you dump the clocks on the Yoga Slim 7x?

Neil

> 
> 
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
>> ---
>> Neil Armstrong (2):
>>        clk: qcom: Add X1E80100 clock driver
>>        qcom_defconfig: enable X1E80100 clock driver
>>
>>   configs/qcom_defconfig            |   1 +
>>   drivers/clk/qcom/Kconfig          |   8 +
>>   drivers/clk/qcom/Makefile         |   1 +
>>   drivers/clk/qcom/clock-x1e80100.c | 348 ++++++++++++++++++++++++++++++++++++++
>>   4 files changed, 358 insertions(+)
>> ---
>> base-commit: 56accc56b9aab87ef4809ccc588e1257969cd271
>> change-id: 20241118-topic-x1e80100-clk-d05b8f0fe1e9
>>
>> Best regards,
>