[PATCH v2 2/2] doc: board: phytec: Add phyCORE-AM62ax
Garrett Giordano
ggiordano at phytec.com
Tue Nov 19 00:16:06 CET 2024
Add documentation for PHYTEC phyCORE-AM62ax SoM.
Signed-off-by: Garrett Giordano <ggiordano at phytec.com>
Reviewed-by: Wadim Egorov <w.egorov at phytec.de>
---
v2:
- Fix underline length in phyCORE-AM62Ax docs.
- Explicitly define build steps in docs, replacing include.
- Verified make htmldocs is working.
- Pick up Reviewed-by:
doc/board/phytec/index.rst | 1 +
doc/board/phytec/phycore-am62ax.rst | 183 ++++++++++++++++++++++++++++
doc/board/ti/k3.rst | 1 +
3 files changed, 185 insertions(+)
create mode 100644 doc/board/phytec/phycore-am62ax.rst
diff --git a/doc/board/phytec/index.rst b/doc/board/phytec/index.rst
index 99848a9e958..697aec30512 100644
--- a/doc/board/phytec/index.rst
+++ b/doc/board/phytec/index.rst
@@ -9,6 +9,7 @@ PHYTEC
imx8mm-phygate-tauri-l
imx93-phyboard-segin
phycore-am62x
+ phycore-am62ax
phycore-am64x
phycore-imx8mm
phycore-imx8mp
diff --git a/doc/board/phytec/phycore-am62ax.rst b/doc/board/phytec/phycore-am62ax.rst
new file mode 100644
index 00000000000..0c5b4814fc2
--- /dev/null
+++ b/doc/board/phytec/phycore-am62ax.rst
@@ -0,0 +1,183 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. sectionauthor:: Garrett Giordano <ggiordano at phytec.com>
+
+phyCORE-AM62Ax
+==============
+
+The `phyCORE-AM62Ax <https://www.phytec.com/product/phycore-am62a>`_ is a
+SoM (System on Module) featuring TI's AM62Ax SoC. It can be used in combination
+with different carrier boards. This module can come with different sizes and
+models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM62Ax family.
+
+A development Kit, called `phyBOARD-Lyra <https://www.phytec.com/product/phyboard-am62x>`_
+is used as a carrier board reference design around the AM62Ax SoM.
+
+Quickstart
+----------
+
+* Download sources and TI firmware blobs
+* Build Trusted Firmware-A
+* Build OP-TEE
+* Build U-Boot for the R5
+* Build U-Boot for the A53
+* Create bootable uSD Card
+* Boot
+
+Sources
+-------
+
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_sources
+ :end-before: .. k3_rst_include_end_boot_sources
+
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_tifsstub
+
+Build procedure
+---------------
+
+Setup the environment variables:
+
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_common_env_vars_desc
+ :end-before: .. k3_rst_include_end_common_env_vars_desc
+
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_board_env_vars_desc
+ :end-before: .. k3_rst_include_end_board_env_vars_desc
+
+Set the variables corresponding to this platform:
+
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_common_env_vars_defn
+ :end-before: .. k3_rst_include_end_common_env_vars_defn
+.. code-block:: bash
+
+ $ export UBOOT_CFG_CORTEXR=phycore_am62ax_r5_defconfig
+ $ export UBOOT_CFG_CORTEXA=phycore_am62ax_a53_defconfig
+ $ export TFA_BOARD=lite
+ $ # we dont use any extra TFA parameters
+ $ unset TFA_EXTRA_ARGS
+ $ export OPTEE_PLATFORM=k3-am62ax
+ $ # we dont use any extra OPTEE parameters
+ $ unset OPTEE_EXTRA_ARGS
+
+1. Trusted Firmware-A:
+
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_build_steps_tfa
+ :end-before: .. k3_rst_include_end_build_steps_tfa
+
+2. OP-TEE:
+
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_build_steps_optee
+ :end-before: .. k3_rst_include_end_build_steps_optee
+
+3. U-Boot:
+
+* 3.1 R5:
+
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_build_steps_spl_r5
+ :end-before: .. k3_rst_include_end_build_steps_spl_r5
+
+* 3.2 A53:
+
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_build_steps_uboot
+ :end-before: .. k3_rst_include_end_build_steps_uboot
+
+uSD Card creation
+-----------------
+
+Use fdisk to partition the uSD card. The layout should look similar to:
+
+.. code-block:: bash
+
+ $ sudo fdisk -l /dev/mmcblk0
+ Disk /dev/mmcblk0: 15 GB, 15913189376 bytes, 31080448 sectors
+ 242816 cylinders, 4 heads, 32 sectors/track
+ Units: sectors of 1 * 512 = 512 bytes
+
+ Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type
+ /dev/mmcblk0p1 * 128,0,1 1023,3,32 16384 278527 262144 128M c Win95 FAT32 (LBA)
+ /dev/mmcblk0p2 1023,3,32 1023,3,32 278528 1693883 1415356 691M 83 Linux
+
+
+Once partitioned, the boot partition has to be formatted with a FAT filesystem.
+Assuming the uSD card is `/dev/mmcblk0`:
+
+.. code-block:: bash
+
+ $ mkfs.vfat /dev/mmcblk0p1
+
+To boot from a micro SD card on a HSFS device simply copy the following
+artifacts to the FAT partition:
+
+* tiboot3.bin from R5 build
+* tispl.bin from Cortex-A build
+* u-boot.img from Cortex-A build
+
+Boot
+----
+
+Put the uSD card in the slot on the board and apply power. Check the serial
+console for output.
+
+UART based boot
+---------------
+
+To boot the board via UART, set the switches to UART mode and connect to the
+micro USB port labeled as "Debug UART". After power-on the build artifacts
+needs to be uploaded one by one with a tool like sz.
+
+Example bash script sequence for running on a Linux host PC feeding all boot
+artifacts needed to the device. Assuming the host uses /dev/ttyUSB0 as
+the main domain serial port:
+
+.. prompt:: bash $
+
+ stty -F /dev/ttyUSB0 115200
+ sb --xmodem tiboot3.bin > /dev/ttyUSB0 < /dev/ttyUSB0
+ sb --ymodem tispl.bin > /dev/ttyUSB0 < /dev/ttyUSB0
+ sb --ymodem u-boot.img > /dev/ttyUSB0 < /dev/ttyUSB0
+
+Boot Modes
+----------
+
+The phyCORE-AM62x development kit supports booting from many different
+interfaces. By default, the development kit is set to boot from the micro-SD
+card. To change the boot device, DIP switches S5 and S6 can be used.
+Boot switches should be changed with power off.
+
+.. list-table:: Boot Modes
+ :widths: 16 16 16
+ :header-rows: 1
+
+ * - Switch Label
+ - SW5: 12345678
+ - SW6: 12345678
+
+ * - uSD
+ - 11000010
+ - 01000000
+
+ * - eMMC
+ - 11010010
+ - 00000000
+
+ * - OSPI
+ - 11010000
+ - 10000000
+
+ * - UART
+ - 11011100
+ - 00000000
+
+Further Information
+-------------------
+
+Please see :doc:`../ti/am62ax_sk` chapter for further AM62Ax SoC related documentation
+and https://docs.phytec.com/projects/yocto-phycore-am62ax/en/latest/ for vendor documentation.
diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst
index 5d01f487622..0deb4d768f9 100644
--- a/doc/board/ti/k3.rst
+++ b/doc/board/ti/k3.rst
@@ -46,6 +46,7 @@ K3 SoC based boards in other sections
* :doc:`../beagle/am62x_beagleplay`
* :doc:`../beagle/j721e_beagleboneai64`
* :doc:`../phytec/phycore-am62x`
+* :doc:`../phytec/phycore-am62ax`
* :doc:`../toradex/verdin-am62`
Boot Flow Overview
--
2.25.1
More information about the U-Boot
mailing list