[PATCH v4 v5 06/10] ARM: socfpga: AA1: support MAC from secure eeprom
Lothar Rubusch
l.rubusch at gmail.com
Tue Nov 19 23:46:39 CET 2024
Several Enclustra devices store MAC address in a secure eeprom device. In
most cases this is the atsha204a (alternatively DS28). The atsha204a device
is preconfigured accordingly. Reading then is based on u-boot's atsha204a
driver. Add such support for Enclustra's AA1 SoMs.
Signed-off-by: Lothar Rubusch <l.rubusch at gmail.com>
---
arch/arm/mach-socfpga/Kconfig | 2 +-
board/enclustra/common/Kconfig | 25 +++++
board/enclustra/common/Makefile | 3 +
board/enclustra/common/enclustra_mac.h | 48 +++++++++
board/enclustra/common/mac_atsha204.c | 102 ++++++++++++++++++
board/enclustra/common/mac_common.c | 52 +++++++++
board/enclustra/common/mac_ds28.c | 93 ++++++++++++++++
board/enclustra/mercury_aa1/Makefile | 2 +
.../mercury_aa1/aa1_board_late_init.c | 17 +++
.../socfpga_enclustra_mercury_aa1_defconfig | 1 +
10 files changed, 344 insertions(+), 1 deletion(-)
create mode 100644 board/enclustra/common/Kconfig
create mode 100644 board/enclustra/common/enclustra_mac.h
create mode 100644 board/enclustra/common/mac_atsha204.c
create mode 100644 board/enclustra/common/mac_common.c
create mode 100644 board/enclustra/common/mac_ds28.c
create mode 100644 board/enclustra/mercury_aa1/aa1_board_late_init.c
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index b7de86e934..60d8c889dc 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -297,6 +297,6 @@ config SYS_CONFIG_NAME
default "socfpga_stratix10_socdk" if TARGET_SOCFPGA_STRATIX10_SOCDK
default "socfpga_vining_fpga" if TARGET_SOCFPGA_SOFTING_VINING_FPGA
-source "board/enclustra/mercury_aa1/Kconfig"
+source "board/enclustra/common/Kconfig"
endif
diff --git a/board/enclustra/common/Kconfig b/board/enclustra/common/Kconfig
new file mode 100644
index 0000000000..4ba082e5e7
--- /dev/null
+++ b/board/enclustra/common/Kconfig
@@ -0,0 +1,25 @@
+config ENCLUSTRA_EEPROM_MAC
+ bool "Enclustra MAC address"
+ select ATSHA204A
+ depends on TARGET_SOCFPGA_ENCLUSTRA_MERCURY_AA1
+ default y
+ help
+ Reads the MAC address out of the EEPROM and configures the MAC
+ addresses in the environment.
+
+choice
+ prompt "Enclustra EEPROM device"
+ depends on ENCLUSTRA_EEPROM_MAC
+ default ENCLUSTRA_EEPROM_MAC_ATSHA204 if TARGET_SOCFPGA_ENCLUSTRA_MERCURY_AA1
+ help
+ Specify the device where the MAC is stored.
+
+config ENCLUSTRA_EEPROM_MAC_ATSHA204
+ bool "MAC stored in 'ATSHA204'"
+
+config ENCLUSTRA_EEPROM_MAC_DS28
+ bool "MAC stored in 'DS28'"
+
+endchoice
+
+source "board/enclustra/mercury_aa1/Kconfig"
diff --git a/board/enclustra/common/Makefile b/board/enclustra/common/Makefile
index 16c8531d74..c83743abe7 100644
--- a/board/enclustra/common/Makefile
+++ b/board/enclustra/common/Makefile
@@ -2,3 +2,6 @@
# Copyright (c) 2024 Enclustra GmbH
# Common for several Enclustra modules
+obj-$(CONFIG_ENCLUSTRA_EEPROM_MAC) += mac_common.o
+obj-$(CONFIG_ENCLUSTRA_EEPROM_MAC_ATSHA204) += mac_atsha204.o
+obj-$(CONFIG_ENCLUSTRA_EEPROM_MAC_DS28) += mac_ds28.o
diff --git a/board/enclustra/common/enclustra_mac.h b/board/enclustra/common/enclustra_mac.h
new file mode 100644
index 0000000000..9631e9d458
--- /dev/null
+++ b/board/enclustra/common/enclustra_mac.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright 2024 Enclustra GmbH, <info at enclustra.com>
+ */
+
+#ifndef ENCLUSTRA_MAC
+# define ENCLUSTRA_MAC 0xF7B020
+#endif
+
+/*
+ * enclustra_mac_is_in_env - Check if MAC address is already set
+ *
+ * @env: name of the environment variable
+ * Return: true if MAC is set, false otherwise
+ */
+bool enclustra_mac_is_in_env(const char *env);
+
+/*
+ * enclustra_get_mac_is_enabled - Test if ethernet MAC is enabled in DT
+ *
+ * @alias: alias for ethernet MAC device tree node
+ * Return: 0 if OK, other value on error
+ */
+int enclustra_get_mac_is_enabled(const char *alias);
+
+/*
+ * enclustra_get_mac_from_eeprom - Get MAC address from eeprom and write it to enetaddr
+ *
+ * @enetaddr: buffer where address is to be stored
+ * @alias: alias for EEPROM device tree node
+ * Return: 0 if OK, other value on error
+ */
+int enclustra_get_mac_from_eeprom(unsigned char *enetaddr, const char *alias);
+
+/*
+ * enclustra_get_mac1_from_mac - Get MAC1 address from MAC and write it to enetaddr
+ *
+ * @enetaddr: buffer where MAC is passed, MAC will be modified to MAC1
+ * Return: 0 if OK, else error value
+ */
+int enclustra_get_mac1_from_mac(unsigned char *enetaddr);
+
+/*
+ * enclustra_setup_mac_address - Try to get MAC address from various locations and write it to env
+ *
+ * Return: 0 if OK, other value on error
+ */
+int enclustra_setup_mac_address(void);
diff --git a/board/enclustra/common/mac_atsha204.c b/board/enclustra/common/mac_atsha204.c
new file mode 100644
index 0000000000..d582bfde0a
--- /dev/null
+++ b/board/enclustra/common/mac_atsha204.c
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024 Enclustra GmbH
+ */
+
+#include <dm.h>
+#include <atsha204a-i2c.h>
+#include <net.h>
+
+#include "enclustra_mac.h"
+
+int enclustra_get_mac_from_eeprom(unsigned char *enetaddr, const char *alias)
+{
+ struct udevice *dev;
+ u32 hwaddr_h;
+ u8 data[4];
+ int i, j, eeprom_addr, mac_len, ret;
+
+ ret = uclass_get_device_by_name(UCLASS_MISC, alias, &dev);
+ if (ret) {
+ printf("%s: Failed, cannot find EEPROM! ret = %d\n", __func__, ret);
+ return ret;
+ }
+
+ /* Make sure atsha204a is in a defined state (part of protocol) */
+ ret = atsha204a_sleep(dev);
+ if (ret) {
+ printf("%s(): Failed to bring EEPROM in defined state\n", __func__);
+ return ret;
+ }
+
+ ret = atsha204a_wakeup(dev);
+ if (ret) {
+ printf("%s(): Failed to wakeup EEPROM\n", __func__);
+ return ret;
+ }
+
+ /*
+ * Read twice portions of 4 bytes (atsha204 protocol). One from address
+ * 4 the other from address 5 of the OTP zone. Then convert the data to
+ * the 6 elements of the MAC address.
+ */
+ eeprom_addr = 4;
+ mac_len = 6;
+ for (i = 0; i < 2; i++) {
+ eeprom_addr += i;
+ if (atsha204a_read(dev, ATSHA204A_ZONE_OTP, false, eeprom_addr, data)) {
+ printf("%s(): Failed to parse ATSHA204A_ZONE_OTP of EEPROM\n",
+ __func__);
+ return -EFAULT;
+ }
+
+ for (j = 0; j < 4 && j + i * 4 < mac_len; j++)
+ enetaddr[j + i * 4] = data[j];
+ }
+
+ /*
+ * Check if the value is a valid mac registered for
+ * Enclustra GmbH
+ */
+ hwaddr_h = enetaddr[0] | (enetaddr[1] << 8) | (enetaddr[2] << 16);
+ if ((hwaddr_h & 0xFFFFFF) != ENCLUSTRA_MAC) {
+ printf("%s(): Failed, parsed MAC is no Enclustra MAC\n", __func__);
+ return -ENOENT;
+ }
+
+ if (!is_valid_ethaddr(enetaddr)) {
+ printf("%s(): Failed, address read from EEPROM is invalid!\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ printf("ethaddr set to %pM\n", enetaddr);
+
+ return 0;
+}
+
+int enclustra_setup_mac_address(void)
+{
+ unsigned char enetaddr[6];
+ int ret;
+
+ if (enclustra_mac_is_in_env("ethaddr"))
+ return 0;
+
+ if (enclustra_get_mac_is_enabled("ethernet0"))
+ return 0;
+
+ ret = enclustra_get_mac_from_eeprom(enetaddr, "atsha204a at 64");
+ if (ret)
+ return ret;
+
+ ret = eth_env_set_enetaddr("ethaddr", enetaddr);
+ if (ret)
+ return ret;
+
+ if (!enclustra_get_mac1_from_mac(enetaddr))
+ return eth_env_set_enetaddr("eth1addr", enetaddr);
+
+ printf("%s(): Failed, unable to set MAC address!\n", __func__);
+ return -ENXIO;
+}
diff --git a/board/enclustra/common/mac_common.c b/board/enclustra/common/mac_common.c
new file mode 100644
index 0000000000..3304a8987c
--- /dev/null
+++ b/board/enclustra/common/mac_common.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024 Enclustra GmbH
+ */
+
+#include <dm.h>
+#include <atsha204a-i2c.h>
+#include <net.h>
+
+#include "enclustra_mac.h"
+
+bool enclustra_mac_is_in_env(const char *env)
+{
+ unsigned char enetaddr[6];
+
+ return eth_env_get_enetaddr(env, enetaddr);
+}
+
+int enclustra_get_mac_is_enabled(const char *alias)
+{
+ ofnode node = ofnode_path(alias);
+
+ if (!ofnode_valid(node))
+ return -EINVAL;
+
+ if (!ofnode_is_enabled(node))
+ return -EINVAL;
+
+ return 0;
+}
+
+int enclustra_get_mac1_from_mac(unsigned char *enetaddr)
+{
+ u32 hwaddr_h;
+
+ /* Increment MAC addr */
+ hwaddr_h = (enetaddr[3] << 16) | (enetaddr[4] << 8) | enetaddr[5];
+ hwaddr_h = (hwaddr_h + 1) & 0xFFFFFF;
+ enetaddr[3] = (hwaddr_h >> 16) & 0xFF;
+ enetaddr[4] = (hwaddr_h >> 8) & 0xFF;
+ enetaddr[5] = hwaddr_h & 0xFF;
+
+ if (!is_valid_ethaddr(enetaddr)) {
+ printf("%s(): Failed, address computed from enetaddr is invalid!\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ printf("eth1addr set to %pM\n", enetaddr);
+
+ return 0;
+}
diff --git a/board/enclustra/common/mac_ds28.c b/board/enclustra/common/mac_ds28.c
new file mode 100644
index 0000000000..49c3a05317
--- /dev/null
+++ b/board/enclustra/common/mac_ds28.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024 Enclustra GmbH
+ */
+
+#include <linux/compat.h>
+#include <dm.h>
+#include <i2c.h>
+#include <net.h>
+
+#include "enclustra_mac.h"
+
+#define DS28_I2C_ADDR 0x5C
+#define DS28_SYS_I2C_EEPROM_BUS 0
+
+int enclustra_get_mac_from_eeprom(unsigned char *enetaddr, const char *alias)
+{
+ struct udevice *dev;
+ u32 hwaddr_h;
+ struct dm_i2c_chip *chip;
+ uint chip_addr = DS28_I2C_ADDR;
+ int alen = 1;
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(DS28_SYS_I2C_EEPROM_BUS, chip_addr,
+ alen, &dev);
+ if (ret)
+ return ret;
+
+ chip = dev_get_parent_plat(dev);
+ if (chip->offset_len != alen) {
+ debug("I2C chip %x: alen %d does not match offset_len %d\n",
+ chip_addr, alen, chip->offset_len);
+ return -EADDRNOTAVAIL;
+ }
+
+ ret = dm_i2c_read(dev, 0x10, enetaddr, 6);
+ if (ret) {
+ printf("%s(): Failed reading EEPROM! ret = %d\n", __func__, ret);
+ return ret;
+ }
+
+ /*
+ * Check if the value is a valid mac registered for
+ * Enclustra GmbH
+ */
+ hwaddr_h = enetaddr[0] | (enetaddr[1] << 8) | (enetaddr[2] << 16);
+ if ((hwaddr_h & 0xFFFFFF) != ENCLUSTRA_MAC) {
+ printf("%s(): Failed, parsed MAC is no Enclustra MAC\n", __func__);
+ return -ENOENT;
+ }
+
+ if (!is_valid_ethaddr(enetaddr)) {
+ printf("%s(): Failed, address read from EEPROM is invalid!\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ printf("ethaddr set to %pM\n", enetaddr);
+
+ return 0;
+}
+
+int enclustra_setup_mac_address(void)
+{
+ unsigned char enetaddr[6];
+ int ret;
+
+ if (enclustra_mac_is_in_env("ethaddr"))
+ return 0;
+
+ if (enclustra_get_mac_is_enabled("ethernet0"))
+ return 0;
+
+ /*
+ * Note: DS28 is still not available in official DT, so referencing
+ * here by i2c busnumber and address directly
+ * preparation for DT access here, though
+ */
+ ret = enclustra_get_mac_from_eeprom(enetaddr, "");
+ if (ret)
+ return ret;
+
+ ret = eth_env_set_enetaddr("ethaddr", enetaddr);
+ if (ret)
+ return ret;
+
+ if (!enclustra_get_mac1_from_mac(enetaddr))
+ return eth_env_set_enetaddr("eth1addr", enetaddr);
+
+ printf("%s(): Failed, unable to set MAC address!\n", __func__);
+ return -ENXIO;
+}
diff --git a/board/enclustra/mercury_aa1/Makefile b/board/enclustra/mercury_aa1/Makefile
index 53c84d8156..b145254466 100644
--- a/board/enclustra/mercury_aa1/Makefile
+++ b/board/enclustra/mercury_aa1/Makefile
@@ -6,3 +6,5 @@ ifeq ($(CONFIG_SPL_BUILD),)
obj-y += aa1_set_storage_cmd.o
endif
+
+obj-y += aa1_board_late_init.o
diff --git a/board/enclustra/mercury_aa1/aa1_board_late_init.c b/board/enclustra/mercury_aa1/aa1_board_late_init.c
new file mode 100644
index 0000000000..2e8f8459e3
--- /dev/null
+++ b/board/enclustra/mercury_aa1/aa1_board_late_init.c
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Enclustra GmbH
+ * <info at enclustra.com>
+ */
+
+#include <env.h>
+#include <init.h>
+#include <dm/uclass.h>
+#include <dm.h>
+
+#include "../common/enclustra_mac.h"
+
+int board_late_init(void)
+{
+ return enclustra_setup_mac_address();
+}
diff --git a/configs/socfpga_enclustra_mercury_aa1_defconfig b/configs/socfpga_enclustra_mercury_aa1_defconfig
index 6a2434fe5a..5f52a30e9d 100644
--- a/configs/socfpga_enclustra_mercury_aa1_defconfig
+++ b/configs/socfpga_enclustra_mercury_aa1_defconfig
@@ -28,6 +28,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_BOARD_LATE_INIT=y
CONFIG_CLOCKS=y
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_NO_BSS_LIMIT=y
--
2.39.2
More information about the U-Boot
mailing list