[PATCH 08/20] rockchip: sdram: honor CFG_SYS_SDRAM_BASE when defining ram regions

[Heiko Stuebner]

Currently the sdram code for arm64 expects CFG_SYS_SDRAM_BASE to be 0.
The ram being in front and the device-area behind it.

The upcoming RK3576 uses a different layout, with the device area
in front the ram, which then also extends past the 4G mark.

Adapt both the generic zone definitions as well as the ATAG parser
to be usable on devices where CFG_SYS_SDRAM_BASE is not 0.

Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
 arch/arm/mach-rockchip/sdram.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-rockchip/sdram.c b/arch/arm/mach-rockchip/sdram.c
index 1fb01e1c4b1..4e2af55d6e1 100644
--- a/arch/arm/mach-rockchip/sdram.c
+++ b/arch/arm/mach-rockchip/sdram.c
@@ -181,9 +181,9 @@ static int rockchip_dram_init_banksize(void)
 		 * BL31 (TF-A) reserves the first 2MB but DDR_MEM tag may not
 		 * have it, so force this space as reserved.
 		 */
-		if (start_addr < SZ_2M) {
-			size -= SZ_2M - start_addr;
-			start_addr = SZ_2M;
+		if (start_addr < SZ_2M + CFG_SYS_SDRAM_BASE) {
+			size -= SZ_2M - (start_addr - CFG_SYS_SDRAM_BASE);
+			start_addr = SZ_2M + CFG_SYS_SDRAM_BASE;
 		}
 
 		/*
@@ -228,7 +228,7 @@ static int rockchip_dram_init_banksize(void)
 					return -EINVAL;
 				}
 
-				size -= rsrv_end - start_addr;
+				size -= rsrv_end - (start_addr - CFG_SYS_SDRAM_BASE);
 				start_addr = rsrv_end;
 				break;
 			}
@@ -302,7 +302,7 @@ int dram_init_banksize(void)
 	      ret);
 
 	/* Reserve 0x200000 for ATF bl31 */
-	gd->bd->bi_dram[0].start = 0x200000;
+	gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE + 0x200000;
 	gd->bd->bi_dram[0].size = top - gd->bd->bi_dram[0].start;
 
 	/* Add usable memory beyond the blob of space for peripheral near 4GB */
-- 
2.45.2